altendorf f 45 used for sale

4000 x 2000mm 4000w LOW HOURS

Reference ID PP-52769 Category Flexo Printer Manufacturer Flexotecnica Model Chronos Year Built 2005 Color 10 Impression- Working Hours - Speed 350 m/min Max. size 1200 mm Min. Size - Condition Good Location Europe Availability - Machine Description year of construction: 2005; installed in 2006. Number of printing units: 10 Printing possibility: 10 + 0 Printing width: 1200 mm Material width: 1250 mm Printing format: 340 – 800 mm Printing speed: Up to 350 m/min (Depending on the quality and type of material, inks used, printing format, clichés, ink coverage, and color overlap.) Drying system: Gas System: Gearless Cliché thickness: to be specified Anilox rollers: ceramic Apex, engraving to be specified Inks: solvent-based and water-based Printable material: plastic films Reel weight range: 2 + 25 kg Operator side: to be determined Drive side: opposite  ...

Reference ID PP-52915 Category 5-Colors Flexo Printer Manufacturer Bobst Model Flexo 200 Year Built 1988 Color 5 Impression- Working Hours - Speed-- Max. Size - Min. Size - Condition Good Location Europe Availability Immediately Machine Description 5 colors Feeder type: Vacuum sheet feeder with pneumatic pressure plate Anilox rollers: All used, ceramic Printing units 1–4: 160 lines/cm, maximum feed volume 8.5 cm³/m² Printing unit 5: 100 lines/cm, maximum feed volume 10.5 cm³/m² Doctor blade system: Ceramic anilox rollers with metal doctor blade Vacuum sheet transport: Yes, 2007 vacuum transport (modified stainless steel suction plate) System upgrades: Sheet cleaning and warm air dryer, both Type 2 200 from DUO TECHNIQUE;

Martin FFG 924 Midline – Flexo Folder Gluer Line Reference ID: PP-53017 Category: Flexo Printer Manufacturer: Martin Model: FFG 924 Midline Year Built: 1989 Colors: 4 Condition: Good Location: Europe Availability: Immediately Technical Specifications Maximum size: 920 × 2400 mm Minimum size: 255 × 480 mm Speed: up to 18,000 sheets/hour Configuration Prefeeder: Martin (Year 2000) 4 Flexo printing units (Rapiset system) Slotter unit Rotary die-cutter Folder-gluer section Glue monitoring system: Valco GlueChek (Year 2016) Machine control upgrade: 2018 Strapping machine: Cyklop Inline 1200 (Year 1998) Palletizing system: MuK robotic palletizing system (Year 1998)

USED FMC FOODTECH A144 AUTOCLAVE REF#: C6849 Sterilizer A144 manufactured by FMC FOODTECH General characteristics: Maker FMC FOODTECH Model A144 Year of manufacture 2006 Weight 2240 kg Maximum working pressure 4 bar Test pressure 5.72 bar Pressure safety valve 4 bar Maximum working temperature 205 ºC Steam conditions min. 6 bar / max. 7.5 bar Air conditions min. 5.5 bar / max. 6.5 bar Cooling water conditions min. 3 bar / max. 5 bar Capacity 6820 L Engine features: Tension 380 V Power 10 kW Frequency 50 Hz - 3P

USED LÖDIGE FKM 2000D STAINLESS STEEL 2.000 LITRES BLENDER REF#: C5725 Lodige FKM2000D mixer with a total volume of 2000 liters manufactured in 316 stainless steel. Two inspection doors with a 55 kw geared motor completely reconditioned. General characteristics: Manufactured by LODIGE Model FKM 2000D Material Stainless steel 316 Year built 1973 Weight 3700 kg (2060 kg + 1640 kg motor and reducer) Technical characteristics: Capacity 2,000 L (800-1,400 L useful) Motor characteristics: Manufactured by SCHORCH Voltage 400/690 V Current 94/55 A Power 55 kW Frequency 50 Hz cos(fi) 0.89 Rotational speed 2960 rpm Reducer characteristics: Manufactured by ELENDER Model SZBW 250 Ratio 0.04 Rotational speed 120 rpm

FRASCOLD SA 210 BY / MCL 80 Brand:FRASCOLD, DELTA TECHNICS Type:SA 210 BY / MCL 80 Stock number:M21-6073 Cooling capacity:5.8 kW Number of fans:1 + 4 Fin spacing:6,35 mm Refrigerant:HFC Voltage:400 / 230 Volts Dimensions:706 x700 x 512 / 2250 x 700 x 250 mm Weight:65 + 59 kg Year:2004 Number in stock:1 piece(s) Price: Quotation request Description: Complete Frascold system with 1 piston compressor. Equipped with a Delta Technics evaporator (MCL 80) and an Eliwell ID 974 controller. Mentioned capacity at an evaporating temperature of -5°C and an ambient temperature of +32°C. Visit also our website: used-refrigeration

Machine Details Stock-No. 1105-03435 Type of machine Bed Type Milling Machine - Universal Make LAGUN FBF 1200 Type HEIDENHAIN TNC 335 Year of manufacture 1991 Type of control CNC Storage location HAGUENAU Country of origin SPAIN Delivery time IMMEDIATELY Freight basis EX STOCK Price Technical details x-travel 1100 mm y-travel 600 mm z-travel 600 mm surface area 1200X 550 mm turning speed range: 50-3000 TR/MIN power capacity 20 kW control TNC 355 HEIDENHAIN Additional information CNC CONTROL HEIDENHAIN TNC 355 IN PERFECT WORKING CONDITION

The combination: Hot air regeneration and contact heat for soups. This is a multifunctional car from the Recaldo Famoso series from Blanco. Regeneration of food in the hot air compartment and liquid food in the "soup regeneration unit" and cooling of cold dishes in a mobile unit. With sneeze guard and integrated heat board. Ideal for a mobile self-service station. All functions (cooling, hot air, heat board, heated output surfaces, soup regeneration) can be controlled separately. The perfect helper in every kitchen. You will receive an invoice with VAT. Other information: Cooling compartment (active convection cooling): Adjustable to the degree from +2°C to +15°C (at ambient temperature of +32°C) Hot air regeneration compartment (circulating air heating): Adjustable to the degree from +30°C to +140°C Keeping fresh food warm (Cook & Serve) Active reheating of hot  ...

Complete coil-fed cutting and feeding line for disc production Composed of: • Feeder/Decoiler: LARA DEMAE-10000/100/1400-D • Cutter: TIMAC TZZ-1604 with double-station stacker • Shear and feed table up to 1400 mm by LARA Condition: In operation, ready for production. Designed mainly for working with carbon steel, stainless steel, and aluminum. The installation combines a servo-driven straightener-feeder from LARA with a TIMAC circular shear, scrap-cutting shear, and automatic double-station stacker, allowing for continuous, precise, and safe operation. Main components: Hydraulic motorized decoiler with loading cart and loop control via laser sensor. Equipped with safety barriers in the coil loading area for optimal visibility during the decoiling and cutting process. Combined straightener-feeder with 11 rollers and AC servomotor controlled by PLC + touchscreen HMI. TIMAC  ...

Type: W/ARW 2200/12 Flying Splice Comm. 2011-001.1 Working width: 2200 mm Finished roll weight max. 2000 kg Finished roll diameter max. 2x 1200 mm Finished roll width min. 800 mm; max. 2200 mm Material Paper/ Foils 75 μm – 1000 μm Machine speed max. 1500 m/min Depending on the type of material and material thickness achievable Web tension: max. 1000 N Finished roll sleeves: inside 152.4 mm outside 162.4 mm - Type of cardboard sleeve, plastic - Sleeve tolerance according to DIN 6748 or 55470 Unwinding: Type ARW 2200/12 Unwinding: axisless 2 x 1200 mm; sleeve holder 6" L.W. (other dimensions with additional accessories possible) Sleeve holder: 6" L.W. (other dimensions with additional accessories possible) Pulleys: DM approx. 150 mm Brake: Generator brake with energy recirculation, control via ultrasonic sensor Path control: Edge control E&L with ultrasonic sens ...

Original JCB backhoe as good as new 60cm

Blasting container for blasting glass beads, ceramic balls, grnat sand, hard cast gravel with conveying floor, abrasive preparation, blasting device, filter system. Internal dimensions L=5850 B= 2300. Side Door Open for easy loading with the forklift

Anilox - cylinders and plates washer

Fortuna dough dividing and working machine Type: A3 Completely overhauled repainted Division of 30 Weight range dough pieces 32-80 grams Dough insert per saucer 960-2400 grams with incubation electric head The robust design and duration oil lubricating of the transmission parts ensures a long service life Easy cleaning of the knife head 380V / 50Hz Weight of the machine approx. 640 kg Machine stands on a specially made wheelchair Dimensions: Height: 150 cm Width: 60 cm Depth: 70 cm The machine was completely dismantled and completely overhauled from the ground up. Then completely repainted.

Blasthouse components as a kit for self-assembly or by assembly by our specialist personnel. Flat conveying floor, transverse screw conveyor, bucket elevator, wind screening, sieve, abrasive bunker, blasting device, filter system, blow-in system, suction wall and electrical control.

Blasting house with extraction floor for mineral abrasives (glass, ceramics, corundum, garnet sand and so on). Magnetic separator, cyclone, preparation, material bunker, abrasive refill, free jet pressure blower, filter system with cleaning. Lining of the walls with 4mm fabric rubber

machine measurements: 9.657 x 1.472 x 1.985 mm machine weight: -- kg power capacity: -- kW Condition: used - as good as new Specification: FFP 2 N95 mask system complete Consisting of: - see sketches in the plant - cycle time approx.: 35 - 50 pieces/min - not CE certified - Space requirement approx.: 9,657 x 1,472 x 1,985 mm - Completely assembled The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Originates from prominent pharmaceutical manufacturing in Europe. Fully enclosed and guarded structure – extra safety for operators. Working Description: Marchesini Pack Service PS300 semi-automatic case packer for small to medium output production requirements; suitable for: Contract Packing, Pharmaceutical, Cosmetics, Nutraceutical, Medical Devices and other industries. The pre-formed cases must be placed directly on the loading area. Cartons are fed by conveyor from the machine in front of PS300 into its stacking unit, where they are collated upwards, as it is programmed through the Operator Interface Panel. The case is then automatically fed and discharged on a free running conveyor. - Wide range of cases and products working sizes - Cases feeding area is entirely safe, free from any mechanical movement - Torque overloading control on ...

Specifications: - 3 shelves with 8 mounting lanes each L 940 mm - Distance between support bars / width of the mounting lanes 30 mm - Height / width of the retaining strips H 40 / W 30 mm - 4 h. swivel castors - Space requirement W 1200 x H 1050 x D 550 mm - Weight 80 kg

DMG Mori Seiki LaserTec 50 FineCutting Sauer CNC Laser Precision Machine Year / Model: 2019 Control: Celos with Siemens 840D sl Operate CELOS with Siemens 840D sl Operate including 2l .5 ERGOline Control with multi-touch screen CNC Laser Precision Machine with High Speed Machining LASERTEC 50 FineCutting for laser fine cutting, laser drilling, laser welding NC swivel rotary table highly dynamic and precise Travel: 500 mm x 500 mm x 700 mm travel integrated ytterbium cw fiber laser 450W qcw ytterbium fiber laser with 4500W Pulse peak power and 450 W power Processing head (80 mm focal length), 5-axis transformation 100 working hours (new-new) Kaufpreis neu/Buying price in year 2020: 890.000,- Eur, Made in DMG Germany. Included: Fanuc robot automation + Keller autom. Extraction system solid machine base frame made of mineral casting, Camera through optical path for fib ...

fully functioning used 3 axis milling machine, brand lid, type FP2, with vice, and many accessories.

Forklift TOYOTA - 8 FBE 20 T Specifications: • Load capacity: 2,000 kg • Mast type: Triplex • Overall height: 2,240 mm • Lifting height: 5,000 mm • Free lift: 1,670 mm • Forks: 1,200 mm • Battery: 48 V 6 EPzS 690 Ah 09/2017 • Hawker digital D: 48/80 charger • Total weight: 3,630 kg Accessories: • Double auxiliary hydraulics • Integrated sideshift • Load protection grille •Windscreen • 2x front work lights • Fork extension 1,800 x 120 x 40 mm Year of Make: 2017 Price: We ask for your binding offer. Available from: immediately Terms of delivery: ex location – EXW Berlin Payment Terms: Payment before pickup Accessories without guarantee. The following applies: "Object bought as seen". The prospective buyer must satisfy himself on site of the completeness of the property.

Hot air sterilization for dry heat sterilization and depyrogenation. Autoclave with single-leaf door on both sides. Operating temperature: 160/250°. Chamber size: 1000 x 1450 x 1450 mm (depth).

x-travel: 1350 mm y-travel: 650 mm z-travel: 650 mm Control: Heidenhain type: TNC 426 milling-head swivable +/-: 90 ° spindle taper ISO: 40 table surface area: 1600x800 mm chip conveyor: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Steam air sterilizer for the counterpressure sterilization of aqueous solutions in sealed containers. Pass-through autoclave with semi-automatic doors on two fronts. Hydraulic system made entirely of stainless steel. Capacity: 1470 litres. Operating temperature: 138.9°. Chamber size: 800 x 800 x 1250 mm (depth).

Linear drive, spindle axis, stroke 1135, EGC-120-1135-BS-25P-S-KF-0H-MR-GV, 556809, Festo, mint condition Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition with traces of storage! The part was bought from a spare parts warehouse of a company, was there for some time in stock but never in operation and has little storage traces Festo spindle axis, linear module, liner drive, linear slide EGC-120-1135-BS-25P-S-KF-0H-MR-GV, 556809, Overall dimensions: 1625x130x110mm, approx. 55kg, slide 300x70mm, stroke 1135mm, 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded i ...

Cooler CUBA Type: SGBE 56-F82 Cooling capacity: 32.8 kW at DT8, 26.2 at DT 7 Surface: 193 m2 Air flow: 14 600 m3/h Fin spinning: 7 mm Electrical heating Fans: 2 x 560 mm Dimensions: 2700 mm x 900 mm x 1000 mm Refrigerant: Freon Volume: 44.7 l Pieces in stock: 3 Reference number: CH221 Condition: Used in good condition Price on request, We have many other Kealteanlagen : Bitzer,Copeland,Frascold,Lunite,Kueba,Guentner,Eco,Alfa-Laval,Goedhart ,Helpman

Power: 6KW , Ratio: 320:1 , Speed in/out: 1.450 / 4,53 , Shaft ø in: 70mm. , Shaft ø out: 125mm. (hollow)

Sulzer RT FLEX 58T-B Cylinder heads complete 5 pieces available New, never used Other major parts also available In our stock in Istanbul please contact: info@fin-marine

Axial fan, FL050-VDK.4I.V5S, Ziehl ABEGG, new Please note: Original Ziehl Abegg product and not a replica from ……. Special price If you have a VAT number, we will gladly issue you an invoice without VAT. As good as new! The parts were purchased from a company's spare parts warehouse, were in their original packaging, show only very minor signs of storage, have never been used and are completely new. 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian law applies without exception and court location St. Pö ...

Fiorini Storage Tank 8000 Liters VKB 2.0 - 1000L 4" Buffer tank 8000 liters 2x125FL 8 bar Make: IVRP - Fiorini Type VKG – 8,000 – V – 2x125FL – 8 bar Special model Painted on the outside, black on the inside 20mm insulation 2x flange connections DN 125 3 threaded connections 1/2" PN 8 bar Tmax: +60°C Dimensions: Diameter mm 1840, height mm 3465 Weight kg approx. 252.7 (empty) Connection: 2x DN125 Product no.: G0300062000035 Year of construction 2023/24 Condition: Optical 1-2, Technically ok Stock Equipment, as good as new Price: on request in Euro (plus VAT from Nettetal) – 3 months warranty (Technical changes and prior sale reserved!) Location: MTA Deutschland GmbH, 41334 Nettetal

Fortuna Viereck Ciabatta - Bread roll system Type: TM 4-row with flour spreader with sprinkler with seed storage with turntable with Spüher Hourly output approx. 3800 pieces Stainless steel version on rolls 380V 50Hz

30 ton 1250 x 2500mm

Fortuna + Lippelt Bread Roll System Compact Fortuna Primus K4 Head Machine 4- Rows Weight range: 35 - 80 grams Volumetric lobe diameter: 64 with hardening plate Hourly output max.  5000 / piece Front + Rear + Roller Flourer 2x working speed (slow + fast) Siemens Simatic Touch Panel Control Rev. 2010 Machine volume max. 70dB Weight head machine: 600kg Lippelt fermentation cabinet Type: G 8000 L/R Year of construction 2014 Operable from 4 to 6 rows (depending on the head machine) Number of hours per head machine from 5000 - 8000 pieces with punching station for round and long rolled dough pieces  4x punching with cutting device punch Cutting strength adjustable with stamp station with direct setting on 58x78cm & 58x98cm sheets with settling tape Special fermentation carriers without mould accumulation Siemens Touch Panel Color Screen incl. accessories on  ...

Flott Mk3