altendorf f 45 used for sale

Engine number: 7 805 371 Power: 39 kW Speed: 1500 1/min overhauled, no generator, no starter motor Price Excl. VAT, subject to prior sale Photos on demand

Engine number: 017 5 241 Power: 57 kW Speed: 1500 1/min overhauled, no generator, no starter motor Price Excl. VAT, subject to prior sale Photos on demand

Engine number: 2 472 863/64 Power: 22 HP Speed: 2000 1/min overhauled, no generator, starter Price Excl. VAT, subject to prior sale Photos on demand

Engine number: 4-139-190-193 Power: 51 HP Speed: 2500 1/min overhauled, no generator, no starter motor Price Excl. VAT, subject to prior sale Photos on request

Engine number: 5 066 973 Power: 38 HP Speed: 2300 1/min overhauled, no generator, no starter motor Price Excl. VAT, subject to prior sale Photos on request

Engine number: 6 567 130 Output: 44 kW Speed: 1500 1/min overhauled, no generator, no starter motor Price Excl. VAT, subject to prior sale Photos on request

Engine number: 4 392 859/60 Power: 20 HP Speed: 1800 1/min overhauled, no generator, starter, with alternator Price Excl. VAT, subject to prior sale Photos on request

; ready for use

approx. 14 running metres, H: 550cm, compartment load: 3000 kg, pallet racks, heavy duty racks, high racks, industrial racks, shelves immediately from stock Data: H : approx. 550 cm D : approx. 110 cm L : approx. 14 running metres Load: 3000 kg compartment load Stand in galvanized Trusses 270 x 14 x 5 cm, D30 Trusses in orange Brand new BLT / PR55 manufactured in Europe & tested according to the current standard DIN EN 15512. 100% quality at the best price. Shelf consists of: 06 x Stand approx. 550 cm x 110 cm, disassembled. 30 x traverse approx. 270 x 14 x 5 cm, D30. 60 x locking pins. Levels: Floor + 3 60 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 2220,00 € net plus legally valid VAT You will receive an invoice with VAT. The pre-assembly of the frames can be done by us for a small surcharge of 12.50 € / net per piece.

Transmitting vessel with 2,000 l. gross content, inlet with pneumatic cone closure (incl. 1 spare cone), venting and outlet via pneumatic squeezing valves. Conveyor lines on the side of the building.

Kuhse control cabinet for CHP incl. breaker 800A

Uhlmann C 100 horizontal cartoning machine - Fully automatic bottle packaging and simultaneous feeding of    leaflets - Max. Power 100 FS / min - Bottle length max. 150 mm Format: L = 70 x 130 mm B = 30 x 100 mm H = 15 x 85 mm New hardware and software PLC Mitsubishi control and 8 inch color touch panel mechanically overhauled Optional: - GUK folder folder 4 fold folding - Cognex 1D barcode and 2D matrix codes reading system for brochure leaflets    and carton code - Luminance control, presence check for leaflets in carton - embossing station - brochure feed - Vacuum pump / Venturi nozzle

Delivery time immediately from stock! Motor three-phase current 400V with frequency converter (kW) 4.0 Table dimensions (mm) 600 x 600 Cutting width (mm) 400 Cutting height (mm) 390 Cutting speed (m/min) 50 – 1000 Band saw blade dimensions (mm) 3600 x 13 x 0.9 Machine dimensions without packaging (mm) 2225 x 1120 x 770 Weight (kg) 465 Standard equipment Precise drive controlled via a frequency converter Digital speed display Stepless belt speed Balanced intervertebral discs Hard rubberized treads Hardened and ground guide jaws LED task light Height-adjustable guide arm Machine colour RAL 7005 / RAL 7035 12-month warranty for single-shift operation

Foellmer ME 45/EX; good condition; Working width 450mm; short and long investment table; Tool for groove and perforate; Foot switch; Zaehler.; Ready. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.

CROSS-FEED SPLICER Width: 3400 mm

Valve terminal, valve assembly, 50E-F14GDQSERYKJUXUXIX….., Festo, new Absolute special price ! Attention: Original Festo product, no replica from.. We still have several identical and other such devices, but the quantity is ending. Buy more than 1 piece there is still a great discount. The current new price is € 4.450 excl. VAT. If you have a UID number, we will gladly issue an invoice without VAT. New in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely new and in ist original packaging. Valve terminal, valve assembly from Festo MPA-FB-VI, 50E-F14GDQSERYKJUXIXPXNY-D-UL1-EX1E+M, 32P-SGK-R-MAASVAIIIU-10KKSL The valve terminal consists of 44 valuable Festo components: 1) 1 piece of angle, CPX-EPL-EV, 195716, 2) 1 piece linking block, CPX-GE-EV-S-VL, 8022170, 3) 7 pieces of in ...

Fit the PVS 125 or 150 mm Reework construction group or simply to fit in the Exchange or replacement for food TEC / Busser / Stephan / Dacia / or similar Reeworkanlagen for the bread / baking / food industry for the production of bread mash or similar products

BRIQUETTES MACHINE PRACTICALLY BRAND NEW, WORKED FOR JUST TWO MONTHS Type_DINAMIC 70/200 Depth _2000 mm Height _ 1430 mm Production_ 100/200 Kg/h Briquette dimension_ diameter 70 mm Briquette length_ 50 mm Motor_ Kw 9,3 Net weight_ 1400 kg

conventional haertepruefer for the Processes Rockwell C , B , A Analog measuring watch, manual operation, weight load system Standard compliant according to ISO6506 Performance 2 years At the price, no used hardness tester is worthwhile. Better to spend a little more, but with a guarantee. More info schuetz-licht.de/produkte/haertepruefer/haertepruefgeraete-rockwell/ha ertepruefgeraet/

Valve terminal, valve assembly, 50E-F14GDQSUXYKJNY…., Festo, new Absolute special price ! Attention: Original Festo product, no replica from.. We still have several identical and other such devices, but the quantity is ending. Buy more than 1 piece there is still a great discount. The current new price is appr. € 2.680 excl. VAT. If you have a UID number, we will gladly issue an invoice without VAT. New in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely new and in ist original packaging. Valve terminal, valve assembly from Festo MPA-FB-VI, 50E-F14GDQSERYKJ-D-UL1-EX1E, 32P-SGK-R-MASVAIIIU-7KL The valve terminal consists of 26 valuable Festo components: 1) 1 piece of angle, CPX-EPL-EV, 195716, 2) 1 piece interlinking block, CPX-GE-EV-S-VL, 8022170, 3) 3 pieces of interlinki ...

FORCIPOL - the quality grinding machine / polishing machine for metalography that is cheap on the market - from the simple grinding machine for manual preparation to the semi-automatic machine - The FORCIPOL series is modular and can be assembled as required FORCIPOL 102: Basic grinding machine / polishing machine with a grinding wheel 250 mm and basic control FORCIPOL 202: as before, but 2 grinding wheels 250 mm For rationalization and reproducible cuts (can be combined with FORCIPOL 102 or 202): FORCIMAT 52: Sample wineer head with simple control FORCIMAT 102: Sample winer head with programmable control For the supply of lubricants and suspensions (only IN the case of FORCIMAT 52 / 102) DOSIMAT 12 - Lubricant Dosing Device DOSIMAT 52 - Lubricant and suspension dispenser (adjust integrated internal control on the device) DOSIMAT 102 - Lubricant and suspension dispenser  ...

Valve terminal, valve assembly, 50E-F14GDQSERYKJ-D-UL1-EX1E, Festo, new Absolute special price ! Attention: Original Festo product, no replica from.. We still have several identical and other such devices, but the quantity is ending. Buy more than 1 piece there is still a great discount. The current new price is appr. € 2.250 excl. VAT. If you have a UID number, we will gladly issue an invoice without VAT. New in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely new and in ist original packaging. Valve terminal, valve assembly from Festo MPA-FB-VI, 50E-F14GDQSERYKJUXIXPXNY-D-UL1-EX1E+M, 32P-SGK-R-MAASVAIIIU-10KKSL The valve terminal consists of 26 valuable Festo components: 1) 1 piece of angle, CPX-EPL-EV, 195716, 2) 1 piece interlinking block, CPX-GE-EV-S-VL, 8022170, 3) 2 p ...

Vickers hardness tester of the extra class Modular design - as stand alone hearing tester or as a fully automatic machine. cheapest fully automatic machine worldwide As a full automatic incl. - 6-fold turret - 5 MP camera - 2 lenses (2 more optional) - motorized XY table - Overview camera - first-class hardness testing software IMPRESSIONS - incl. automatic hardness course CHD, NHT, RHT - additional software - modules for 2D / 3D mapping, screw testing ISO898, edge finishing, etc. - motorized lifting spindle - Autofocus, auto brightness + contrast ... This is THE quality machine at a fair price request now without obligation!

Complete extrusion line with support for sale, dispense, extrude, granulate and SAG (complete pictures in the PDF). Extruder: Feddem FED 72 MTS, 2000., 2012 general overhaul. 600-1000 kg / h with PBT, PA6, PA66, GF and impact resistant modified products. Thyssen TGE 3-72-DOS-4 transmission, 314 kW Compexmotor, 4 degassing zone with 3 vacuum degassing, 3 body parts open side feeder, new price from 690.000 € Dosage: Dosage: 6 Brabender dosing scales with control, multiple pellets/Flake car, 2 powder scales, a fiberglass scales, Transitube support for glass fibers Side feeder: Feddem/Flender Vacuum pump: Integrated Granulation: IPS SG120/7.5, 2000, 9 kW Also here: Complete solid steel frame for the feeders and water bath brushes, bagging Tower for granules with S + S all metal separator, Transitube glass fiber/material high to promote

Built: 1998 Dimensions: 1.15 m x 0.8 m x 2.5 m (approx. WxLxH) Heating unit: 93 kW Burner : Gas burner Dry temperature: max. 80 degrees C Umluf fan: 8,000 m3/h; 4.0 kW; 1435 rpm Location : Warehouse Room Herzogenaurach Sales price: € 2,990,- net, from location We have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please ask.

Scissor lift terrain - working platform with crawler chassis. FRONTEQ Type: FS0507T Payload: 200 kg Platform dimensions: 125 x 0.7m Platform extendable + 0.6 m Transport dimensions 1.32 m x 1.0.8 m Height: 2.07 m Handrails folded down Height: 1.48 m Weight approx.: 900 Kg Working height: 6.6 m Platform height: 4.6 m Gradeability up to: 25° Overload shutdown: Drive via battery 24 V / 115 Ah integrated charger 24 V/ 20 A 230 V power supply to the platform Bright non-marking chains German operating instructions included 2 years manufacturer's warranty Due to the compact design and the crawler chassis, the platform can be easily loaded and transported, can be easily transported with appropriate ramps with a car trailer or in a Sprinter or so. Other sizes with wheel and crawler drive available. For further dates or offe ...

Year of construction : 1983 / 2003 Oven and burner renewed Dimensions: 1.3 m x 1.0 m x 2.6 m (approx. WxLxH) Heating unit: 93 kW Burner : Gas burner Dry temperature: max. 80 degrees C Circulating air fan: 8,000 m3/h; 4.0 kW; 1500 rpm Location : Camp Herzogenaurach Sales price: € 2,900,- net, from location We have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please ask.

Scissor lift terrain - working platform with crawler chassis and automatic support. FRONTEQ Type: FS0610TL Payload: 230 kg Load capacity platform pull-out: 120 kg Platform dimensions: 1.8 x 0.78 m Platform extendable + 0.89 m Transport dimensions 2.27 m x 0.96 m Height: 2.14 m Railings folded down Height: 1.67 m Weight approx.: 1780 Kg Working height: 8 m Platform height: 6 m automatic levelling support Retractable supports bright non-marking chains. Gradeability up to: 30° Overload shutdown: Drive via battery 24 V / 2x 85 Ah integrated charger 24 V/ 36 A German operating instructions included 2 years manufacturer's warranty The machine is also available without support. For further dates, delivery time and availability please inquire. Depending on availability, the machine can be inspected at our warehouse  ...

Formwork/Beam H20 Form-on smartBEAM 20 P new from 6,50 EUR/lm Form-on smartBEAMS 20P new, bridge made of phenolic resin glued hardboard, available in all lengths: Subject to sale Your benefits: - reliably high load-bearing capacity over the entire length of the beam due to the homogeneous web material - Secured component load-bearing capacity through mechanical strength grading and load test for 100% of the belts - consistent product properties thanks to high dimensional stability - multiple savings compared to squared timber due to higher load-bearing capacity with lower weight Carrier produced according to DIN EN and with German technical approval. The images listed are sample images All prices excl. VAT and transport Subject to sale For questions Mr. Becker under 0176700 44689 Purchase and sale of scaffolding/formwork systems and construction ma ...

Manufacturer: Lieder (ROBOT FOOD TECHNOLOGIES) Type: TA54V-2 4 Lines Size of tubes: Ø 75 mm Filling volume: Filler 1: 25 - 50 ml Filler 2: 100 - 250 ml (you can make two different products into one cup) Capacity: up to 10.000 cups/h Cup disinfection: by H2O2 Including: - carton erector and packer 4x5 - Clean air filter (Laminar flow) - CIP installation - SIEMENS S5 control

RC GROUP GLIDER FREE 630 V2 Y5 Brand:RC GROUP Type:GLIDER FREE 630 V2 Y5 Stock number:M23-4609 Cooling capacity:500 kW Application:Cooling Number of fans:12 Refrigerant:R134a Refrigerant Content:2x 107,5 kg Voltage:400 Volts Dimensions:7484 x 2310 x 2605 mm Weight:7,001 kg Year:2013 Number in stock:2 piece(s) Price:Quotation Request Description: Nice air-cooled RC Group water chiller with 2 screw compressors distributed over 2 cooling circuits. Mentioned capacity at a water temperature of +12/7°C and an ambient temperature of +35°C (Q= 602 kW at Tw= +15/10°C and Tamb= +40°C). Free-Cooling: Q= 536 kW at Tw= +15°C and Tamb= 0°C. Visit our website: used-refrigeration

used Treif Falcon portion cutter incl. scale and the sorting station, year of construction 2006, portioning to exact weights, 360° scan for bone-in and boneless products, max. infeed length of 820 mm, depending on the product up to 240 portions per minute, the machine is equipped with a smooth curved blade for products without bones, bone-in version optionally available, products up to -3° C. You are very welcome to inspect and test the machine in our facility in Koblenz, Germany.

surface planer , thickness planer , spindle moulder . machines SCM L'Invincibile second hand machines in Excellent working conditions NOT separate sale thickness planer model SCM S 63 l'Invincibile : useful working width mm. 630 maximum (minimum) working height mm. 240 (3) maximum removal mm. 8 variable feed speed mt./min. 6 ÷ 18 motorized table positioning with reading n.4 knives "Tersa" main motor power Hp 7,5 volt. 380/50 surface planer model SCM F52 l'Invincibile working width mm. 520 tables length mm. 3000 ground cast iron tops n.4 knives tilting guide up to 45° motor power Hp 5,5 volt. 380/50 spindle moulder with tilting spindle model SCM T160 l’Invincibile spindle tilting by electric -5 ° / + 45 ° spindle lifting by electric motor power Hp 5,5 shaft diameter mm. 50 volt. 380/50

Laugenmaschine for store leaching 2-fold full-size lye curtain suitable for metal size 600 x 400 mm Supply for the store semi-automatic, with sliding curtain table frame made of stainless steel mass in mm: 600 x 950 x 660 BxTxH DGUV V3-pretened optional: -driving table made of stainless steel with locking rollers with 5 drawers for metal size 600 x 400 mm; available immediately! Available!

Spare parts for table drilling rig SVO / Stankoimport / Gertner, Fuhrmeister & CO Such as. complete drilling spindle SK50 (Please note the attached pdf-file with a drawing of the spindle) Ball roller spindles from the three axes Electric motors, feed motor 3x, main spindle motor complete control Siemens or control cabinet Control panel with digital device Glass mass Removable flat disc diameter 360mm Radial movement of the support of the flat disc 100mm Transformer / Transformer Angular drill head Sub-apparatus Spindle diameter 110 mm Tool holder ISO 50 Technical data of the original machine Travel laengs approx. 1,000 mm Cross-travel approx. 1,600 mm Vertical travel 1,000mm Laeng movement of the extendable spindle 710mm Speed range 10-1.250 rpm Main engine 11kw Speeds 10 - 1,250 rpm in 22 gear stages Extensive machine documentation including user manual ...

Complete tilt clamping system 2 stueck tipping plates, stud and system covers, stoppers, pads, clamping strips, hoehenbloecke and much more. Length by width 2 piece 500400mm Holes 16mm Number of holes xxx stueck Distance of holes 50mm More data and photos on request Price and further information on request Special price

Transformer - Voltage Transformer 500 --> 220V 10kVA Manufacturer Flasshoff & Klosterberg Type DTB10kVA JP43 Power 10kVA Primae 3x500V 12A Sekundaer 3x220V 26,20A Hz 50-60 Insulating-Kl.E Special price

Kragarmregal, one-sided, 3m height, 1.20m arms, 500kg per arm - New goods - : Price from location incl. loading! 1 shelving unit with 4 staenders 1.150.-EUR (net)! A Kragarm shelving system, hot-dip galvanised, consisting of: shelf edges on one side approx. 3,000 mm high, hot-dip galvanized foot and arm depth 1200 mm with 3 hoe-adjustable shelf arms carrying ability at load centre 600mm 500 kg per arm / 2250 kg per stem at 4 staenders per arm level 4 x 500 kg = 2,000 kg with lashings and diagonal connectors e = 1300 mm for a row of shelves of 4 stems approx. 4000 mm with all screws and nuts, without bottom anchors.; New

diameter 200mm, little used, dusted, good condition.4 Bolts with bolt spacing approx. 94mm, Hole circle diameter of the bolts approx. 133mm, the largest diameter of the short cone approx. 106mm, Drawbar in the middle. All information to the best of our knowledge but without any information. Special price

Kragarmregal, one-sided, 3m height, 1.20m arms, 750kg per arm - New goods - : Price from location incl. loading! 1 shelving unit with 4 staenders 1,295.-EUR (net)! A Kragarm shelving system, hot-dip galvanised, consisting of: shelf divider on one side approx. 3,000 mm high, hot-dip galvanized foot and arm depth 1200 mm with 3 hoe-adjustable shelf arms carrying ability at load centre 600mm 750 kg per arm / 2250 kg per staender at 4 staenders per arm level 4 x 750 kg = 3,000 kg with laengs and diagonal connectors e = 1300 mm with a row of shelves of 4 stems approx. 4000 mm with all screws and nuts, without bottom anchors. Other configurations (frame height, armrails, arm types, etc.) can be used! Please contact us! ; New

Kragarmregal, one-sided, 4,16m height, 1.20m arms, 750kg per arm - New goods - : Price from location incl. loading! 1 shelving unit with 4 pcs 1.450.-EUR (net)! A Kragarm shelving system, hot-dip galvanised, consisting of: shelf divider on one side approx. 4160 mm high, hot-dip galvanized foot and arm depth 1200 mm with 3 hoe-adjustable helving arms carrying ability at load centre 600 mm 750 kg per arm / 2250 kg per stem at 4 staenders per arm level 4 x 720 kg = 3,000 kg with lashings and diagonal connectors e = 1300 mm for a row of shelves with 4 stems approx. 4000 mm with all screws and nuts, without bottom anchors. Other configurations (frame height, armrails, arm types, etc.) can be used! Please contact us!; New

WIELAND IS 75 R Mobile Spaene extractor extractor system Manufacturer WieLAND Type IS 75 R Consisting of suction system type IS-75 R and Cooling agent tank, type FS 300, built 1986 Dimensions (LxWxH) approx. 1500 x 1200 x 1700 mm Weight approx. 550 kg Special price

Kragarmregal, one-sided, 3.5m height, 1.20m arms, 750kg per arm - New ware - : Price from location incl. loading! 1 shelving unit with 4 pcs 1.350.-EUR (net)! A Kragarm shelving system, hot-dip galvanized, consisting of: shelf divider on one side approx. 3500 mm high, hot-dip galvanized foot and arm depth 1200 mm with 3 hoe-adjustable helving arms carrying ability at load centre 600 mm 750 kg per arm / 2250 kg per staender with 4 stems per arm plane 4 x 750 kg = 3000 kg with lashings and diagonal connectors e = 1300 mm for a row of shelves with 4 stems approx. 4000 mm with all screws and nuts, without bottom anchors. Other configurations (frame height, armrails, arm types, etc.) can be used! Please contact us!; New

Transformer - Voltage Transformer 500 --> 380V Manufacturer Flasshoff & Klosterberg Type DTB50kVA Power 50kVA Primaer 3x500V - 525 - 550 59A Sekundaer 3x380V 76A Hz 50-60 Insulating-Kl.E External dimensions: Transformer 1m wide 92cm high 46cm deep Inside 33cm deep 74cm wide 80cm high Weight 450kg Special price

SMI Pack FP560 L sealer 6114 sealing bars 560mm x 560mm, automatic outfeed conveyor, with aplhanumeric LCD control panel

Roll press / dough dividing and warp knitting machine / Klievmaschine Machine Mechanics completely overhauled & repainted by the expert New installation of the entire electrical system, according to the latest standards 6 months warranty Properties: + Stationary machine, very robust & stable construction + Machine is set in motion by switch-on lever, one-hand operation + Cleaning position electric, to the rear, with switch + even division of the dough, excellent rounding of the dough pieces + equipped with active cut-off, for square dough pieces + Partial knife / cutter head has been overhauled / recoated + completely disassembled, mechanically overhauled, repainted + New installation of the entire electrical system, according to the latest standards + Transmission parts run constantly in an oil bath + complete overhaul in Babenhausen, according to German quality stand ...

used cabinet press Manufacturer: Maschinenfabrik Bermatingen GmbH & Co. Type: DIXI 30 S Year of construction: 2009 Serial No.: 109138 specifications: Pressing force: 30 t Filling opening: 1,200 x 670 mm (W x H) Height from the ground: approx. 940 mm Split egg filling opening: 1,070 x 260 mm Height from the ground: 1,310 mm Bale size: 1,200 x 800 x 800 - 1,100 mm Bale weight: up to 270 - 360 kg Drive power: 7.5 kW Cycle time: approx. 29 sec. Pressing time: approx. 14 sec. Binding: 4-fold - vertical with poly strap Machine dimensions: 1,600 x 1,300 x 3,170 mm (W x D x H) Machine weight: 2,180 kg Transport height: 2,240 mm (Subject to errors in the technical data)

Sale front forklift Kalmar with fork adjustment and side shift, Transport high 3,83 m , length with forks 5800mm , width 2550mm, weight 19200kg, approx. 22 000 hrs Very good condition ! Immediately available!

MARK ANDY P5 – 430mm (8-colour) Age: 2017 8 Colour (Flexo) • Unwind Rewind ProLed System and Dryer The Cutting BST Powerscope 5000 Inspection System Sheeting station (Cross) Delam/Relam Cross cutting device 1 delivery belt Mark Andy VPM 400 Panel Mount Machine Meech web cleaning - double sided 2 PitStop trolleys to hold printing cylinder ink trays Impression and magnetic cylinders 48 impression cylinders 7 magnetic cylinders 2 ink trays with non-stick coating Servo-controlled feed unit with closed control loop 1 single-sided unwind for roll diameters up to 40 inches (1016mm), Vertical dancer system, web edge control, closed control loop 1 ultrasonic web edge control with 2 sensors 1 ultrasonic web break control Printing unit: Print and process maximum width 17 inches 431.8 mm Maximum web width 17.25 inches 438.2 mm Min. print processing width 8.5 in 216 m ...

Weibert form7 4-way combination machine Be hem length 2250 mm option: 2600 mm Cutting height at 90 ° / 45 ° 100 / 79 mm Cutting width on the parallel fence 820 mm Saw shaft speed 4000 RPM. Blade tilt 90-45 ° Planing width 300 mm 3 blade shaft Tersa Feed speed 7 m / min Max tool diameter 210 mm Max tool diameter retractable 180 mm Spindle speed 3500/ 7000 / 10000 RPM Spindle diameter milling - saw 30 mm Engine power 400 V / 50 Hz / S6 - 40% 3 x 5,0 kW -. Weight 525 kg G & pieces 5500309