altendorf f 45 used for sale

Filter control valve, switching valve, maintenance unit, water separator, filter bowl, pneumatic filter, filter regulator, maintenance unit combination, filter control valve -Manufacturer: Festo, Maintenance unit filter control valve -Type: MS9-LFR-3/4-D7-EUM-AG-BAR-AS 562531 -Quantity: 1x filter control valve available -Dimensions: 440/115/H205 mm -Weight: 3 kg

Lifting mast, forklift mast, forklift mast, lifting frame, rear forklift, clear view mast -Manufacturer: Linde, forklift mast, unobstructed view mast from front forklift type H30T -Load capacity: 3000 kg -Lifting height: approx. 3500 mm -Dimensions: see photos / technical drawing -Transport dimensions: 2500/1150/H330 mm -Weight: 725 kg

Test stand for filter testing, filter testing, filter test system, filter measurement system, filter test system -Manufacturer: Lorenz, Filter Test System Type FMP 03 with accessories -Filter holder: Type FH 143/149 -Accessory case: with extensive contents -Individual components/accessories: see photos -Dimensions: 600/560/H975 mm / 640/460/H1130 mm / 430/340/H125 -Weight: 146.3 kg

Finger end mill, end mill, milling cutter, roughing end mill, cylinder candle cutter -Manufacturer: Master Fraisa, roughing end mills, 3 pieces -Fraisa: 2 pieces Ø 40 mm type 40 0660 TG125 Stg250 -Master: 1 piece Ø 32 mm type 770 CX 120 STG 207 bf -Price/Delivery: complete: only complete -Transport dimensions: 205/110/40 mm -Weight: 3.3 kg

General SKU225Y106 MakeDeltafilter Serial5454 Magento base g_extra_specificationsFilter self cleaning filter, Make DELTAFILTER Filtrationssysteme GmbH, Type DELTA-STRAIN 110-D/L-H/S, No. 5454, Year of construction 2009, Material Stainless steel 1.4404, Stainless steel 1.4435 (316L), Stainless steel 1.4571 (316Ti), Floor space 0,9x0,9 m, Total height 1,55 m, Weight 200 kg, CE , Extra Specifications Flow capacity in relation to clean water for: 50-100 µm filtration - 24 m³/h 150 µm filtration - 26 m³/h Inlet: DN65 Outlet: DN65 Discharge: DN50 Vent, cleaning: 3/4 BSP Seals: FPM, PTFE Motor data: 400 V, 50 Hz, 180 W Maximum allowable pressure (PS): 10 bar for productroom/heating-jacket Test pressure (PT): 15 bar for productroom/heating-jacket Min./max. allowable temperature (TS): -10°C / +120°C Volume (V): 23,8 litres for productroom 15,3 litres for heating jacket Information Y ...

General SKU397X1156 MakeNiro-Aeromatic TypeT6 spez No.909003 Year of construction1990 LocationBarneveld Main Features MaterialStainless steel Volume540 Ltr. Motor20 KW Specified Features - Fluid bed dryer batch Fluidbeddryercheck With pancheck 2x With pan mounted on wheelscheck Capacity540 l. Pan sizesø 1280 x 550 mm Can be heated by steamcheck With fancheck Capacity2 m³/s Motor2,0 kW, 380 V With dust filtercheck Filter surface21 m²: Fine dust filter: 38,6 m² MaterialStainless steel 1.4301 (304), Stainless steel 1.4435 (316L) Information Extra Specifications Heating capacity: :208.3 kW Steam overpressure: :4 bar Max. allowable operating overpressure: :6 bar Test overpressure: :7.8 bar Max. steam consumption: :356 kg/h Average steam consumption: :190 kg/hFluid bed dryers batchAeromaticDryers > Fluid bed dryers batchBrand > Aeromatic What you can e ...

General SKU397X1155 MakeNiro-Aeromatic LocationBarneveld TypeT6 Main Features MaterialStainless steel Volume540 Ltr. Motor20 KW Specified Features - Fluid bed dryer batch Fluidbeddryercheck With pancheck 2x With pan mounted on wheelscheck Capacity540 l. Pan sizesø 1280 x 550 mm Can be heated by steamcheck With fancheck Capacity2 m3/s Motor2,0 kW, 380 V With dust filtercheck Filter surface21 m²: Fine dust filter: 38,6 m² MaterialStainless steel 1.4301 (304), Stainless steel 1.4435 (316L) Information No.929057 Year of construction1992 With switchgearcheck Extra Specifications Heating capacity: :208.3 kW Steam overpressure: :4 bar Max. allowable operating overpressure: :6 bar Test overpressure: :7.8 bar Max. steam consumption: :356 kg/h Average steam consumption: :190 kg/hFluid bed dryers batchAeromaticDryers > Fluid bed dryers batchBrand > Aeromati ...

General SKU397X1154 MakeNiro-Aeromatic TypeT3 No.919054 Year of construction1990 LocationBarneveld Main Features MaterialStainless steel Volume123 Ltr. Motor7.5 KW Specified Features - Fluid bed dryer batch Fluidbeddryercheck Granulatorcheck With pancheck With pan mounted on wheelscheck Capacity0,123 m³ Capacity0,186 m² With sprayercheck (CIP) Can be heated by steamcheck With fancheck Capacity0.5 m³/s Motor7,5 kW 380/660 V (EEx E II T3) With dust filtercheck Filter surfaceExhaust filter 3.5 m²: HEPA supply air filter 36 m² MaterialStainless steel 1.4305 (303), Stainless steel 1.4552, Stainless steel 1.4301 (304), Stainless steel 1.4306 (304L) Information With switchgearcheck (as is) Floorspace7,6 x 0,78 m Total height3,5 m Extra Specifications Filter housing – explosion pressure resistance (pressure shock resistance): 10 bar(g) Exhaust air filter  ...

General SKU397X1157 MakeNiro-Aeromatic TypeT6 No.879012.1 Year of construction1986 LocationBarneveld Main Features MaterialStainless steel Volume540 Ltr. Motor20 KW Specified Features - Fluid bed dryer batch Fluidbeddryercheck With pancheck 2x With pan mounted on wheelscheck Capacity540 l. Pan sizesø 1280 x 550 mm Can be heated by steamcheck With fancheck Capacity2 m³/s Motor2,0 kW, 380 V With dust filtercheck Filter surface21 m²: Fine dust filter: 38,6 m² MaterialStainless steel 1.4301 (304), Stainless steel 1.4435 (316L) Information Extra Specifications Heating capacity: 208.3 kW Steam overpressure: 4 bar Max. allowable operating overpressure: 6 bar Test overpressure: 7.8 bar Max. steam consumption: 356 kg/h Average steam consumption: 190 kg/h Fluid bed dryers batchAeromaticDryers > Fluid bed dryers batchBrand > Aeromatic What you can expect from Foe ...

Manufacturer: MAW IMA, Type: Frontenbohranlage, Year: 2000, Control: Ferrocontrol, Program: yes, Function: Bohren und Beschläge setzen, Work piece width min-max mm: 300-600, Min.-max. workpiece length in mm: 400-1500, Min.-max. workpiece height in mm: 16-22, Destacking unit: yes, Inlet roller conveyor: Hordenwagen, One or two Spot machine: Stern 4 Platz, Working stations: 4, Dowel driving station: no, Milling spindles horizontal: no, Milling spindles vertical: no, Fitting type: Topfband, Belt drilling stations: yes, Bänder Eindrehstation: yes, Hinges inserting unit: yes, Magazin for hinges!: yes, Set buffer: yes, Dowel driving station: no, Working range X: 1500, Working range Y-axis: 600, Drill gearings: 2, Drilling supprt from bottom: 1 Verstärktes Bohrgetrieb Beschlag/ L Bohrkopf<CRLF>ca.12 spindeln, Drill gearings: 2, Drill support from top: 1 Stück 3 Spindeln, Drill gearing ...

Filter control valve, switching valve, maintenance unit, water separator, filter bowl, pneumatic filter, filter regulator, maintenance unit combination, filter control valve -Manufacturer: Festo, Maintenance unit with filter and control valve, original packaging -Type: LFR-1/2-D-MIDI -Pressure: max. 16/12 bar -Number: 2x filter control valves available -Price: per piece -Weight: 1.3 kg/pc.

General SKU312X490 MakeGörgens Mahltechnik GmbH Dormagen TypeG-130 No.247 Year of construction2001 Main Features Motor110 KW Width1000 mm Specified Features - Fine Impact Mill MaterialStainless steel 1.4301 (304) Fine Impact Mills Turbo millcheck Rotor sizeø 1300 x 680 mm Grinding room sizeø 1580 x 1000 mm Inlet1000 x 150 mm Motorcheck 110 kW 400 V Speed 1100—1700 rpm Information LocationBarneveld With control cabinetcheck (as is) Floor space2,68 x 1,84 m Total height2,08 m CEcheckFine Impact MillsGörgens Mahltechnik GmbH DormagenMills > Fine Impact MillsBrand > Görgens Mahltechnik GmbH Dormagen What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many ...

General SKU356S855 MakeHasler AG (CH) TypePowder dosing unit No.14175/ 13540 Year of construction1997 LocationBarneveld Pressure Working pressure3.2 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume200 Ltr. Motor1.5 KW Specified Features - Powder filler Closed stirring vesselcheck Capacity200 Ltr Vessel sizesdia. 600x1350mm Conical bottomcheck Flat top sidecheck With covercheck Top connectionsDN 150 (1x), DN25 (3x) Outletdia.72mm Max. temperature160 degr.C. With paddle stirrercheck Motor1,5 KW, 220-240/380-415 Volt (Ex) Powder fillers MaterialStainless steel 1.4435 (316L) Information Floorspace0,9x0,9 M Total height2,4 M Weight650 Kg ATEX compatiblecheck Extra Specificationswith TURBODISK type 75 /360degr. sprayer, Capacity 80 Ltr/H (2 bar), Material HastelloyPowder fillersHaslerPackaging machines > Powder fillersBrand > Hasler What y ...

Color: Black Single length = 2 m Original packaging Minimum purchase quantity = 8 m Price per m = 13.00 € + VAT Pick-up and shipping available Shipping costs will be charged separately Item invoice due when ready for shipment

Color: Black Single length = 2 m Original packaging Price per m = 12.00 € + VAT Minimum purchase quantity = 8 m Pick-up and shipping available Shipping costs will be charged separately Item invoice due when ready for shipment

Color: Black Used Single length = 2 m Price per m = 7.00 € + VAT Minimum purchase quantity = 8 m Pick-up or shipping available Shipping costs will be charged separately Item invoice due when ready for shipment

Color: Black Used Single length = 2 m Price per m = 5.00 € + VAT Minimum purchase quantity = 8 m Pick-up or shipping available Shipping costs will be charged separately Item invoice due when ready for shipment

Color: Yellow Original packaging Single length = 2 m Price per m = 13.00 € + VAT Pick-up and shipping available Shipping costs will be charged separately Item invoice due when ready for shipment

Color: Yellow Used Single length = 2 m Price per m = 7.00 € + VAT Pick-up or shipping available Shipping costs will be charged separately Item invoice due when ready for shipment

Color: Yellow Original packaging Single length = 2 m Price per m = 9.00 € + VAT Pick-up and shipping available Shipping costs will be charged separately Item invoice due when ready for shipment

Color: Yellow Used Single length = 2 m Price per m = 5.00 € + VAT Pick-up or shipping available Shipping costs will be charged separately Item invoice due when ready for shipment

Met RoboHelix-machines kunnen spiraalvormige schoepen worden gevormd uit standaard ronde of van een patroon voorziene werkstukken. RoboHelix-machines vereisen uiterst nauwkeurige synchrone bewegingsbesturing. Door de gebruiker gegenereerde gegevens worden vanuit cloudgebaseerde software, HelixNinja, naar het apparaat gedownload. Deze informatie wordt vervolgens verder verwerkt om coördinaten in het 3D-vlak te genereren, waarmee het proces van het creëren van een vliegtuig vanuit een blanco basis wordt nagebootst. De motoren volgen synchroon deze coördinaten om het vliegtuig te produceren. Met de elektronische nokkenplaatfunctie in TwinCAT NC Camming (TF5050) is relatieve synchrone beweging overal en altijd mogelijk. Afmetingen en toleranties zijn geen probleem meer zodra de motoren en aandrijvingen zijn gekalibreerd. De tweede generatie RX250 uit de machinelijn van RoboHelix heeft een ...

General SKU300P642 LocationBarneveld MakeElsto TypeC313F P71 No.735004 Main Features MaterialStainless steel Surface0.49 m2 Specified Features - Screen filter Sieve filterScreen filter Sieve sizesDia. 250mm InletDN55 OutletDN40 Capacity0,49m2 Motor0,15 kW, 400 V., 630/760 rpm MaterialStainless steel Information Year of construction2007 Floor space1,3x1,2 M Total height1,8 M Weight180 KgScreen filters-Filters > Screen filtersBrand > - What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU360U949 MakeÄktaprocess LocationBarneveld CEcheck Main Features MaterialStainless steel Motor0.37 KW Specified Features - Miscellaneous filter MaterialStainless steel Miscellaneous filters Motor0,37kW, 220-240/380-420Volt, 1370rpm Capacity6Ltr/h Information No.29000032 Year of construction2011 Mounted on wheelscheck Floor space1,7x0,90 m Total height1,64 m Weight370 kg Extra SpecificationsMax system pressure 6 bar at 40°C, 3 bar at 60°C, pneumatic supply 3-6 bar, max power 1500 VA, 230 volt, with B&:R touchscreen display, stainless steel keyboard, Lewa pump unit, type EEC0000-13, cap. 6 ltr/hour, Endress+Hauser flowmeter Miscellaneous filtersAKTA ProcessFilters > Miscellaneous filtersBrand > AKTA Process What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination world ...

Deze spiraalvormige bladenvormmachine is een koudwalsmachine voor het continu walsen van spiraalvormige bladen uit stripstaal. Door de parameters aan te passen (walsoffset, invoerhoogte, walsdruk, geleidingswiel, enz.) kunnen bladen van diverse specificaties worden gewalst.

FETTE double-pallet filling skid

FORMING MACHINE KOPPENS, MODEL: VM 600 HS Technical description: Machine number: VM 600 HS-481 Power supply: 380 V, 45.47 A, Ph 3, 50 Hz Power: 22.09 Kw Weight: 1675 Kg Conveyor width: 600 mm Dimensions: 2400 x 1300 x 2100 mm Different formats available

FORMING MACHINE KOPPENS, MODEL: VM 600 Technical description: Serial number: VM-600-55 Power supply: 415 V, 3 Ph, 50 Hz, 23 A Power: 11,31 kW Conveyor width: 600 mm Form size: (7x) 60 mm Weight: 850 Kg Dimensions: 2000 x 900 x 1950 mm

FORMING MACHINE KOPPENS, MODEL: VM 600 HS Technical description: Serial number: VM 600 HS-281 Conveyor width: 600 mm Weight: 1.750 Kg Power supply: 380 V, 3 Ph, 50 Hz, 45 A, 22 kW Dimensions: 2400 x 2100 x 2200 mm

FORMING MACHINE, KOPPENS TYPE: VM 400 Technical description: Serial number: VM 400/30-1517 Power supply: 380 V, 3 Ph, 50 Hz, 4,94 kW, 12.39 A Weight: 550 kg Mesh belt conveyor Conveyor width: 400 mm Dimensions: 2400 x 680 x 2270 mm

FORMING MACHINE, KOPPENS TYPE: VM 400 HD Technical description: Serial number: VM400 HD-1717 Power supply: 380 V, 3 Ph, 50 Hz, 7,67 kW, 16.57 A Weight: 830 kg Mesh belt conveyor Conveyor width: 400 mm Dimensions: 2000 x 950 x 2350 mm

FORMING MACHINE KOPPENS, TYPE: VM 400 HS Technical description: Serial number: VM 400 HS-1481 Power supply: 380 V, 3 Ph, 50 Hz, 23 A, 7,77 kW Weight: 810 kg Dimensions: 1900 x 900 x 2200 mm

FORMING MACHINE, FORMAX TYPE: PFM-19 Technical description: Serial number: 416 Power supply: 380 V, 3 Ph, 50 Hz, 27.6 kVA, 42 A Conveyor width: 550 mm Format diameter: (3x) 120 mm Dimensions: 3000 x 1000 x 2700 mm The Fl9s hydraulic injection forming system offers extremely accurate weight control and the ability to manufacture a wide range of products at different temperatures. It achieves high performance and forms products with a natural texture and excellent appearance.

FREEZER CABINET, YORK SAMIFI FREEZERS SRL, MODEL: MIDI C/15 Technical features: Refrigerant: NH3/R717 Plates number: 16 plates Stations number: 15 stations Station size: 1835 x 1140 x 100 mm Dimensions: 2700 x 1620 x 2700 mm

Key data: 1020 mm, 3 mm

Max. bending length: 1020 mm Max. sheet thickness: 3.5 mm steel Bending rail ground Weight: approx. 1000 kg

Model: F-19 Jaar 1996 Conditie Gebruikt Serienummer: 326 Voorraad nummer: 2574 Belt width:, 510 mm Capacity: 25 - 75 strokes/min. Hopper: 240 kg Mould: oval, (6x) 91x69 mm Power: 3 x 400V, 50Hz, 22kW Dimensions: 3700 x 1350 x 2600 mm Weight: 2150 kg

General SKU305U634 MakeHaver & Boecker LocationBarneveld CEcheck Type1 WXEH- (U) Main Features MaterialStainless steel Number of1 heads Specified Features - Powder filler MaterialStainless steel 1.4301 (304) Powder fillercheck Bag fillercheck Pneumatic fillingcheck Number of dosing heads:1 Dosing15 and 20 kg (max. 50 kg) Capacity30-100 bags/hour a 15 and 20 kg With motor 7,5 kW, 400 volt, 1500 rpm (EX) With hoppercheck Hopper sizesDia. 400x640 mm With mixer in hoppercheck Information No.51/246325/01 Year of construction2005 Mounted in framecheck With switchgearcheck Floorspace1,4 x 1,8 m Total height2,1 m Weight800 kg ATEX compatiblecheckPowder fillersPowdered foodsHaver & BoeckerPackaging machines > Powder fillersIndustries > Food & Feed > Powdered foodsBrand > Haver & Boecker What you can expect from Foeth: -- Machine is in working condition -- At a reduce ...

General SKU300U900 MakeDott. Bonapace LocationBarneveld CEcheck TypeMC-50 Main Features MaterialStainless steel Specified Features - Powder filler MaterialStainless steel 1.4401 (316) Powder fillercheck Information No.01/04 Year of construction2004 With switchcheck Floorspace0,65x0,33 m Total height0,39 m Weight70 kg Extra Specifications50 cycles, Multigel vibrator unit, type MC100, 230 volt comes with :various plates. Powder fillersGeneric medicinesDott. BonapacePackaging machines > Powder fillersIndustries > Pharmaceutical > Generic medicinesBrand > Dott. Bonapace What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

with control unit, vacuum pump, Fabr. BECKER & Drilling Unit

Fiberlite F18-8x50cy Fixed Angle Rotor THERMO SCIENTIFIC New equipment in its original packaging Thermo reference: 75003663 Capacity: 8 x 50ml Max. speed: 14,500 rpm FCR Max: 24.446 ×g Compatible with the following models: Thermo Scientific Sorvall Legend XT/XF Centrifuges, Sorvall Legend X1, Multifuge X3/X3F, Multifuge X1 and SL 40F

Gr. working width: 4040 mm for sheet metal with a strength of 40 kg up to: 3 mm Upper bolster adjustment: 400 mm Underbeam adjustment approx.: 80 mm Max. bending angle adjustment electrically up to approx.: 180° Upper bolster variable speed drive: 4 kW Bending beam drive: 2 x 3 kW Back gauge, working range: 10 - 750 mm electr. Connection: 400 V Weight: 9 t Space requirement: 5570 x 2250 x 2000 mm high

A complete filling line with a 12-position gravity and vacuum filler with integrated twist-off capper for the food industry is available. Filling stations: 12, design: rotary machine, liquid viscosity: thin-medium, filling capacity: approx. 2000bottles/h, capping capacity: approx. 1000-1200/h, containers: heat-insulated, container volume: 35l/50l. This is a complete filling line including conveyor belts, accumulation table, sensors, rotary tables, pumps and format parts. The system was taken out of operation in 2024. Documentation available. An on-site inspection is possible.

A Frenco workshop gear testing device is available. Bed length: 590mm, min. center distance: 45mm, max. center distance with fine adjustment/without fine adjustment/without intermediate plate: 105mm/155mm/320mm, repeatability: 1.5µm, intermediate plate length: 210mm, max. worm diameter: 78mm, center distance (worm lengths): 0mm-220mm, measuring table dimensions X/Y/Z: 800mm/700mm/940mm. Machine dimensions X/Y/Z: approx. 1200mm/800mm/1750mm, weight: approx. 330kg. Documentation available. An on-site inspection is possible.

Universal Filling Device Fritsch UFG-EPA-08RHG-NL20 Year of Make: 2008

Universal filling device Fritsch UFG 8 Year of Make: 1997

Universal Filling Device Fritsch UFG 20-30-8 Year of Make: 2002

Platform Base for Fortuna Roll Presses Mobile Stationary Suitable for Fortuna automatic roll presses and other manufacturers (Fortuna semi-automatic, fully automatic machine, size 3/4) With deep heavy-duty castors or stationary as required With screw-on thread Made of solid stainless steel plate

General SKU413X1254 MakeVirba LocationBarneveld TypeVSK 14,7-10-10/7,5-II Main Features MaterialStainless steel Motor0.9 KW Surface2.06 m2 Specified Features - Fluid bed dryer continuous Continuous fluidbed dryercheck Surface2,06 m² Bed sizes2750 x 750 mm Product inletø 150 mm Product outlet2x ø 200 mm Number of sections:1 Air inletø 250 mm Air outletø 400 mm Vibro motorcheck 2x Motor2x 0,90 kW, 400 V, 965 rpm MaterialStainless steel 1.4301 (304) Information No.33482 Year of construction1997 Mounted on mild steel framecheck Floorspace3,70x1,40 m Total height2,25 mFluid bed dryers continuousNew arrivalsVibraDryers > Fluid bed dryers continuousNew arrivalsBrand > Vibra What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the ma ...

CONTROLS   PLC SPECIFICATIONS THROUGH FEED GRINDING MACHINE   Working width: 1000 mm   number of brushing station: 6 BELT GRINDING UNIT   workpiece height (max): 100 mm   spindle revolutions (min): 0.3 /min   spindle revolutions (max): 10 /min ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 1800 mm   space requirements -front/back-: 1750 mm   total height: 2200 mm   total weight approx.: 1500 kg

PRESS DESIGN   drive system: hydraulic SLIDE   total force (nominal): 40 to   stroke: 45 mm   stroke rate (max.): 110 /min TOOL DIMENSIONS   lower table (left-right): 300 mm   lower table (front-back): 280 mm   shut height max.: 90 mm DIMENSIONS / WEIGHTS   space requirements -left/right-: 1835 mm   space requirements -front/back-: 1500 mm   total height: 1800 mm   total weight approx.: 2500 kg