altendorf f 45 used for sale

CNC unit for boring and routing Brand: Atemag Type: Function Line Extra with two tool interfaces angle 90° Max. drive speed 10,000 R.P.M. Max. tool spindle speed 15,000 R.P.M. Gear ratio i = 1:1,5 Turning direction left/right Torque max. 20 Nm Tool interfaces: ER 32 / ER 16 Spindle for omega router/ ER 16

- Producer Finnrose - Type Cooling - Year of construction 2001 - Working width 1300 mm - Working height 100 mm - Max. part height 100 mm - Roller diameter 60 mm - Roller pitch 100 mm - Colour 7035 lightgrey - Voltage / HZ 400/50 - Voltage fluctuation max. +/- 5 %

CNC unit for corner notching in off-set design Brand: Atemag Type: Function Line Extra 2 Max drive speed 8,000 R.P.M. Max. tool spindle speed 12,000 R.P.M. Gear ratio i = 1:1,48 Turning direction left/right Torque max. 20 Nm Tool interface: Special Attention: price is just valid for standard version

CNC unit for boring, routing and sawing Brand: Atemag Type: Function Line Duo With two tool interfaces, angle 90° Max. drive speed 10,000 R.P.M. Max. tool spindle speed 15,000 R.P.M Gear ratio i = 1:1,5 Turning direction left/right Torque max. 20 Nm Tool interfaces: ER25, ER 32, saw blade flange 30 mm, sawblade dia. max. 180 mm or modular

Decoiler Coil weight: 2 x 2 ton Material width: 380 - 500 mm Coil exterior diameter: 1.300 - 1.400 mm Expansion range: 445 -530 mm Leveller / Straightener Material width : 40 - 500 mm Number of levelling rolls: 7 pcs. Diameter of the levelling rolls: 60 mm Number of pinch rolls: 2 pcs. Diameter of the drawing rolls: 60 mm Number of pull out rolls: 2 pcs. Diameter of the pull out rolls: 60 mm Material thickness: 0,4 - 1,6 mm Cross section: 800 sq mm Feeding speed: 0 - 30 m / min Required power: 3 kW

with two vacuum fans - Producer Fladder - Type Gyro 300 VAC-2 - Working width 1300 mm - Year of construction 1997 - Number of brush heads 6 Stk. - Rotating and oscillating sanding head - With sound insulating cabinet - Motor power 5 kW - Vacuum transport belt - Feed speed infinitely adjustable 2 - 8 m/min - Length 2070 mm - Width 2370 mm - Height 2240 mm - Weight 2300 kg - Location - Voltage / HZ 400 / 50

wird mit neuem VakuumTransportband ausgeliefert. - Producer Fladder - Type Gyro 300 VAC - Working width 1300 mm - Year of construction 1994 - Number of brush heads 6 Stk. - Rotating and oscillating sanding head - Motor power 5 kW - Vacuum transport belt - Feed speed infinitely adjustable 2 - 8 m/min - Length 2070 mm - Width 2370 mm - Height 2240 mm - Weight 2300 kg - Location - Voltage / HZ 400 / 50

- Producer Finnrose - Type Cooling - Year of construction 2001 - Working width 1.300 mm - Working height ~ 900 + - 20 mm - Max. part height ~ 100 mm - Cooling dryer 2.000 mm - Roller transportsystem - Roller diameter 60 mm - Roller pitch 100 mm - Length conveyor 3.000 mm - Length 3.000 mm - Colour 7035 - Location, in stock - Voltage fluctuation max. +/- 5 % - Without switch cabinet

An FMI separating machine for can production is available. Production capacity: approx. 500cans/min, diameter range: 52mm-99mm, height range: 40mm-85mm. An on-site inspection is possible.

Witzig & Frank TriFlex 5XYear of manuf. : 2018 Control : Fanuc 30i-B ____________Description:In General:Year of construction:2018Control system:FanucProcessing stations:5 piecesLoading station:1 pieceTravelling range:X-axis:450 mmY-axis:500 mmZ-axis:450 mmRapid traverse X/Y/Z:50 m/minTurret:Number of stations:8Speed:13,300 rpmTorque:58 NmTool holder:HSK 63 CWorkpiece/device:Dimensions max.:350 x 350 x 350 mmMax. permissible mass:250 kgMedia supply line:6 piecesNC swivelling rotary table:A-axis:+/- 150°B-axis:360°Max. load:250 kgTable diameter:320 mmEquipment:Loading/unloading:Fanuc Robot M20i-AChip removal:2x chip conveyorsCoolant supply:IKZ system, 20 barPosition measuring systems:Direct in all axes

Belotti FLU 2617Year of manuf. : 2023 Control : Siemens 840Dsl Speed : 24000 rpmMovement X/Y/Z : 2600/1700/950 mmTool holder : HSK-A63 ____________Description:Spindle:Technology:Swivelhead with MotospindleSpeed:24.000 rpmPower (max.):15 kWTorque (max.):14,3 NmTaper:HSK-A63A-Axis:+/- 120°C-Axis:270°In general:Toolmagazine:18 stationsClampingsurface:2.350 x 1.700 mmRapid travers in X/Y/Z:80/80/60 m/minEquipment/Accessory:Workpiecemeasurement:Touch probe, m&h RWP 20.50Toolmeasurement:Laser, HexagonToolbreakagecontrol:Probe, m&h TS 35.20Setup operations:Electronic Handwheel3D-Extruder:CEAD S25Granulatedryer-/conveyor:VismecFurther Accessory:Spindlechiller

A medium- to low-voltage distribution transformer France Transfo is available. Power: 800kVA, upper voltage: 10000V, overvoltage: 12kV, impulse voltage: 75kV, winding test: 28kV, connection: D YN05, insulation class: A, rated current: 46.2A/1155A, short-circuit voltage: 6%, cooling type: ONAN, oil weight: 450kg, weight: 2100kg. Documentation available. An on-site inspection is possible.

Fanuc M-2iA/3SLYear of manuf. : 2021 Control : Fanuc R-30iB Mate Plus ____________Description:In General:Number of axes:4Repeatability:+/- 0.1 mmWorking range:1,130 x 400 mmMaximum wrist weight:3 kgController:Fanuc R-30iB PlusRemote Controll:iPendant Touch

Size: Equipments: Speed: 4,300 cycles per hour Fold types: Letter, Single Fold, Zigzag Fold, Doub Job Memories: 20 Folding Capacity: 8 Sheets Document Feeder Capacity: 325 Sheets Maxi Feeder: 1,200 Sheets Envelope Capacity Hopper: 500 Envelopes Envelope Capacity Side Exit: 500 Envelopes Envelope Capacity Power Stacker: 500 Envelopes Set Thickness: 2.5mm Reverse Reading: Yes Cascade Feeding from all Feeders: Yes High Capacity Power Stacker: Yes Dimensions: Depth: 460mm, Height: 920mm, Length: 1 Dimensions: Weight: 140 Kg (6 Stations)

Size: 450 x 460 mm Equipments: Hoist duplex tires Lifting height 225 cm Weight 18700 KG Diesel 6 Cylinder Deutz Motor Stacker length 360 cm width 200 cm installation height 240 cm Fork length 250 cm width 30 cm

Bundle packer • Packing sizes in feeding direction max. width 400, depth 450, height 300 m • Foil width max. 530 mm • Output max. 25 packs/min • 2 infeed conveyor • 1x for folding boxes, product width max. 220 mm • 1x for bottles/cans, product width max. 80 mm • Stacking device for folding boxes • PLC Siemens S7-300 • Simatic touch panel • Connection 400V/50Hz/2kW Shrinking tunnel • Tunnel width 450 mm • Tunnel height ca. 260 mm • Tunnel length 800 mm • Max. heating temperature 300 °C • Grid band (speed adjustable) • Digital temperature monitoring • Cooling fan • PLC Siemens S7-300 • Connection 400V/50Hz

Mitutoyo Formtracer AvantYear of manuf. : 2023 ____________Description:Technical Data:Movement in X/Z:100/500 mmClampingsurafce:600 x 450 mmCrossslide (X/Y):100/50 mmEquipment/Accessory:Formtracer:FTA-H4 D3000-DContracer:C-3200Surftest:S-3000Operation:Control unit with JoystickWeiteres Zubehör:Turnable vice, calibration blocks, Protective tarpauline

Size: 760 x 440 mm Equipments: Spindles: 4 Drilling diameter: 3 – 10 mm Drilling depth: up to approx. 70 mm Spindle spacing: adjustable Spindle shaft: Ø 11 mm Hole spacing: min. approx. 3 mm / max. approx. 800 mm Table size: approx. 760 x 440 mm Connection: 380 V Power: approx. 1.5 kW Weight: approx. 90 kg

Key data: 19560 KW, 11000 V

Multifuel 19.5 MW Wartsila CHP Power Plant with 2 x 20V34DF (2021) This 19.5 MW multifuel (Gas / HFO / LFO) combined heat and power (CHP) plant is equipped with two Wartsila 20V34DF generating sets and exhaust gas heat recovery boilers. The plant was commissioned at the end of 2022 and has accumulated approximately 20,000 operating hours since new. All operation and maintenance activities have been performed by the Wartsila OEM Service team, ensuring that both the generating sets and auxiliary systems are maintained according to standards and remain in near-new condition. The plant is currently fully operational, available for immediate delivery, and can be load-tested for qualified buyers. The scope of delivery includes complete mechanical equipment capable of producing 19.5 MW of electrical power and 9.5 tons/hour of saturated steam at 10 bar. In addition, the delivery includes an ...

Size: 1045 x 1135 mm Equipments: Thermal laminating Flat pile feeder IA 20 Suction feeder head Automatic rotary separator ITM 104 Jogger Maximum laminating format: 1045 x 1135 mm Minimum laminating format: 215 x 215 mm Substrate thickness: 150 - 450 g/sqm Foil thickness: 24 - 40 microns Speed: 2500 - 4500 sheets/hour

We are selling the stock of the soap factory Riesa here In the last picture you will find an overview picture of the production hall with the machine inventory. Here we offer you: 1 palletizing robot 6-axis robot, for payloads up to 165 g, set to Euro pallet dimensions, robot reach 2655 mm, The robot is energized due to programming, installation dimensions 771 x 610 mm, average power 2.5 kW, electrical voltage 380 - 575 V, mechanical protection IP54, wrist and arm protection IP67 The plant was shut down in 2024. Roller conveyor and feed conveyor belt can be purchased for an extra charge

Robot KUKA Robot KR 210 R3300 K – Foundry ultra (45 operating hours) Year of manufacture: 06/2014 Load: 210 kg Reach: 3300 mm Smart Pad: no Control: KRC4 Cable: no Colour: orange Operating hours: 45 h Condition: perfect condition, only in operation for test purposes Note: Foundry Edition, designed for harsh environments. Robot was in a development center for test purposes

Automatic dough divider and rounder Fortuna Automat A3-30 is a reliable and efficient solution for fast and precise dividing and rounding of dough. This machine processes up to 30 dough pieces per cycle, significantly improving production efficiency and ensuring consistent results. The dough weight range of 32 to 70 g allows flexibility for various bakery products. The machine is equipped with three plates and an automatic head tilting function, making operation easier and increasing productivity. Robust construction and high-quality manufacturing ensure stable operation, long service life and easy maintenance, making this machine ideal for professional use. Technical specifications: Manufacturer: Fortuna Model: Automat A3-30 Machine type: Automatic dough divider and rounder Capacity: 30 pieces per cycle Dough weight range: 32 – 70 g Number of plates: 3 Functions: Automatic h ...

Pallet wrapper, Robopac – used - : Price per piece ex location: only 2.500.-€ (net), incl. loading! Manufacturer: Robopac Type: Rotoplat 105/FRD Year of manufacture: 9/2002 Net weight: approx. 380kg 230V, 50Hz, 5.0 A, 1.4kW, Condition: good Available: immediately Location: 26209 Hatten

Over 80 years experience in maintenance., Expert that jointly reflects on the ideal solution for your situation., 1,000 hours or one-year guarantee: optimal reliability., Available 24/7., Quickservice., We can always supply a replacement generator., Wide range of stock that can be supplied immediately.; Transport weight [kg]: 1656; Gross weight [kg]: 1656; Engine: NEF45SM3; Accessories: Product features:, Drip-tray, Start battery, Exhaust system; Water Tank Volume [l]: 390

number of spindles: 4 bore capacity in steel (diameter): 25 mm bore stroke: 120 mm weight of the machine ca.: 0.85 t dimensions of the machine ca.: 1.55 x 0.65 x 2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 560 mm y-travel: 320 mm z-travel: 400 mm table-size: 950 x 450 mm table load: 300 - 350 kg tool adaptor: ISO 40 turning speeds: 25 – 2000 / 2240 U/min quill stroke: 95-100 mm vertical head swivelling: 90 Grad rapid traverse: 1400 mm/min total power requirement: 2,8 kW weight of the machine ca.: 1,7 t dimensions of the machine ca.: 1,8 x 1,6 x 1,8 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

BAZ Johnford FMC 850 for sale The machine is built in 1999 and can be viewed under chipboard. Enclosed is a type picture of the machine! Available in mid-June!

x-travel: 300-320 mm y-travel: 240-270 mm z-travel: 300-310 mm table-size: 670 x 320 mm tool adaptor: ISO 40 turning speeds: 45-2240 U/min quill stroke: 60 mm head swivability: 360 ° feed: 12,5 - 630 mm/U rapid traverse: 1200 mm/min weight of the machine ca.: 1 t dimensions of the machine ca.: 1,265 x 1,08 x 1,62 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 26136 Technical data: ( non-binding ) - Test panel for wall mounting with various test equipment - Space required: W 600 x H 750 x D 300 mm - Weight 40 kg

x-travel: 300-320 mm y-travel: 240-270 mm z-travel: 300-310 mm table-size: 670 x 320 mm tool adaptor: ISO 40 turning speeds: 45-2240 U/min quill stroke: 60 mm head swivability: 360 ° feed: 12,5 - 630 mm/U total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 7500 m³/h, 4 kPa, 8 kW

TEKA Filtercube 4H Welding Fume Extraction with Siemens Control & Spark Trap (built in 2021) For sale is a high-quality TEKA Filtercube 4H welding fume extraction system including Siemens control and integrated spark trap. The facility is in very good, well-maintained condition and has been regularly professionally maintained. It was reliable in industrial use until the end. Technical data: Manufacturer: TEKA Model: Filtercube 4H Year of Make: 2021 Power: 7.5 kW Volume flow: 4,800 m³/h Negative pressure: 18 mbar (1.8 kPa) Control: Siemens Control Integrated spark trap Scope of delivery: TEKA Filtercube 4H extraction system Integrated spark trap Siemens Control Not included: Extraction arms Piping / Piping System Condition & Use: Very good, well-maintained condition Regularly serviced Fully functional and ready to use Ideal for industrial welding fume ...

Pump Manufacturer: Dynamic Pumps Pump Type: FTB 200-150-315 Engine manufacturer: KSB Motor power: 30 kW Speed: approx. 1470 rpm at 50 Hz Flow rate: approx. 300 m³/h Lifting height: approx. 21 m Voltage: 400 V Triangle / 690 V Star at 50 Hz Degree of protection: IP55 200 mm suction connection 150 mm pressure port 315 mm impeller diameter Single Stage Centrifugal Pump axial entry (front) radial exit (top)

Manufacturer: FAM Model: FV-2D Year: 2002 Condition: Used Serial Number: 5488 Stock Number: 3371 Knife speed: 450 RPM Knife set: grater Infeed height 1550 mm Outfeed height: 600 mm Power: 3 x 380V, 50Hz, 2.2kW Dimensions: 1400 x 800 x 1550 mm Weight: 260 kg

General SKU035F151 MakeKoruma Maschinenbau KG Neuenburg TypeDisho V.100/45 Pharma No.2996 Year of construction1982 Mounted on legscheck Pressure Working pressure3 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume45 Ltr. Motor6 KW Specified Features - Processing vessel Closed stirring vesselcheck Capacity45 Ltr. Vessel sizesø 420 x 400 mm Conical bottomcheck With covercheck Top connectionscheck With jacketcheck With gate type stirrercheck Motor0,26 kW, 400 V Speed mixing shaft28 rpm With homogeniserø 100mm Motorhomogeniser ± 4,9/6,0 kW MaterialStainless steel 1.4571 (316Ti) Information LocationBarneveld With switchcheck Floorspace1,5x0,7 m Total height1,7 m Weight300 kg Extra SpecificationsMixing, dispersing and homogenising unit, ø 100 mm: with vacuum pump, 0.75 kWProcessing vesselsFryma KorumaProcessing vessels > Processing vess ...

Overview  This rotary roll-fed labelling machine was manufactured in 2009 by France SIDEL. The Rollquattro F15 18T is designed for roll-fed labelling of PET bottles in beverage production lines. The machine operates with a rotary system with 18 bottle plates and is configured with mechanical cam control and manual label splicing.  Technical data Capacity: approx. 18,000 bottles/hour Formats: 0.5 L / 1.0 L / 1.5 L / 2.0 L Application: Roll-fed labelling of PET bottles Configuration: Rotary machine with 18 plates, mechanical cam drive, manual label splicing Utilities: 400 V / 50 Hz / 23 kW / 46 A Scope of Delivery  Labelling machine | SIDEL | Rollquattro F15 18T | 2009 | Rotary roll-fed labeller with 18 plates Cooling unit | Kelvin Cool-Power | External cooling unit Control system | Control panel with process indicators

Equipment Included - Wurster and Dietz OPTIMAT swing-stroke full gate saw, built circa 1970 - Splitting wedge - Cross conveyor - Roller conveyor - Sharpening machine - Setter - Wurster and Dietz Edge Saw FR 7, built circa 1965 Find more here - / Contact us at -

A Fritz Gross pipe end processing machine is available. Connected load: 11kW, max. pipe diameter: 60mm, weight: approx. 1500kg. An on-site inspection is possible.

The NeoDen ND1 is a high-precision automatic SMT screen printer designed for professional PCB solder paste printing. With a repeat accuracy of +/- 12.5 micron at 6 sigma and Cp of 2.0 or greater, it delivers the precision and reliability demanded by high-quality electronics manufacturing. Manufacturer: NeoDen Model: ND1 Fully Automatic Vision Printing Machine Year of Manufacture: 2026 Type of Machine : Stencil Printer Technical Specifications - Maximum PCB size: 450x350 mm - Minimum PCB size: 50x50 mm - PCB thickness: 0.6 mm to 14 mm - Maximum PCB weight: 10 kg - Transmission speed: 1500 mm/second maximum - Template frame size: 370x470 mm to 737x737 mm - Maximum print area: 450x350 mm - Print head: closed-loop print head with straight line motor - Scraper type: steel or rubber scraper, angles 45 / 55 / 60 degrees - Scraper length: 220 mm to 500 mm - Scraper blade thicknes ...

The NeoDen ND2 is an advanced SMT automatic screen printer designed for easy operation, high precision, and high stability PCB solder paste printing.With a repeat position accuracy of +/- 10.0 micron at 6 sigma and Cpk of 2.0 or greater, the ND2 delivers superior precision over its predecessor the ND1. Manufacturer: NeoDen Model: ND2 Fully Automatic Visual Printer Year of Manufacture: 2026 Type of Machine : Stencil Printer Technical Specifications - Maximum PCB size: 450x350 mm - Minimum PCB size: 50x50 mm - PCB thickness: 0.4 mm to 6 mm - Maximum PCB weight: 3 kg - Transmission speed: 1500 mm/s maximum - Transfer height from ground: 900 +/- 40 mm - Transfer direction: left-right, right-left, left-left, right-right - Template frame size: 470x370 mm to 737x737 mm - Maximum print area: 450x350 mm - Print head: floating intelligent printing head with two independent direct co ...

A barely used foil die-cutting and embossing machine Kama with integrated hot foil stamping is available. Die-cutting force: 165t, max. sheet format X/Y: 760mm/600mm, min. sheet format: 279mm/210mm, max. die-cutting format X/Y: 743mm/585mm, production speed: 5500sheets/h, gripper margin: 10mm, min. paper weight: 100g/m², max. cardboard weight: 1500g/m². Machine dimensions X/Y: approx. 5000mm/2700mm/2750mm, weight: approx. 6000kg, operating hours: approx. 1000h. Including Kama AutoRegister, vacuum pump, compressor and servo main drive. Documentation available. An on-site inspection is possible.

A Mitsubishi CNC wire EDM machine including cooling unit is available. Workpiece dimensions X/Y/Z: 1050mm/800mm/295mm, max. workpiece weight: 800kg, table dimensions X/Y: 780mm/630mm, travel X/Y/Z: 500mm/350mm/300mm, max. table feed rate: 1300mm/min, wire diameter range: 0.2mm-0.3mm, max. wire feed rate: 250mm/s, wire tension range: 2N-25N, tank volume: 635l. Machine dimensions X/Y/Z: approx. 1850mm/2350mm/2050mm, weight: approx. 2550kg. Documentation available. An on-site inspection is possible.

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 58200 € : 1099.98 € : 80 to : 4 mm : 600 mm : 900 mm : 200 mm : 1 - 110 mm : 60 1/min : 6 : 80 mm : 50 mm : 300 mm : 400 mm : 7.5 kW : 1600 mm : 1500 mm : 2750 mm : 5700 kg Welded steel frame construction 6-fold ram guide Pneumatic clutch-brake combination Protective enclosure with light barriers and side doors Mechanical overload protection Two-hand and foot pedal operation Manual stroke adjustment Motorized ram adjustment Variable stroke rate via frequency converter Operating modes: Adjustment mode Two-hand release Foot release 2-stroke operation via light barriers Continuous operation Touchscreen for Stroke counter with preselection for continuous operation Stroke rate adjustment Lubrication intervals and duration Alarm messages Motor direction of rotation Monitoring of inputs and outputs 2 free cams for connecting peripherals Automati ...

x-travel: 500 mm y-travel: 400 mm z-travel: 330 mm total power requirement: kW weight of the machine ca.: 2100 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cutting length: 6.100 mm length: ~ 7.260 mm width: ~ 1.230 mm mm height: ~ 1.550 mm mm Veneer saw or jointing and fine-cutting machine Scheer FM6-6100A for sawing veneer or other thin panels with automatic feed and integrated suction. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 560 mm : 320 mm : 400 mm : 950x450 mm : 1050x320 mm : 25-3600 U/min : SK 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Evaporator GEA KUBA -Type: SGBE 63-F62 -Cooling capacity: 33.3 kW at DT8, 26.6 kW at DT7 -Fin spinning: 7 mm -Electric heating -Fans: 2 x 630 mm -Dimensions: 3020 x 1000 x 1000 mm -Block made of stainless steel -Refrigerant: Freon -Volume: 45 L -Quantity in stock: 1 -Stock number: CH 597 -Condition: Used in very good condition, evaporator 100% tight, fans working, ready to work

Conveyor belt No.01 Dimensions (L × W): 5 m × 0.70 m Conveyor belt No.02 Dimensions (L × W): 6 m × 0.70 m

GR2A 7 (7 kw) - 2024 - 9 months warranty GR2A 20 (20 kw) - 2016 - 6 months warranty GR1AC 30 (30 kw) - 2022 - 9 months warranty GRAV 45 (45 kw) - 2015 - 6 months warranty GRAC 55 (55 kw) - 2010 6 months warranty GR1A 60/X (60 kw) - 2022 - 9 months warranty GR1AC 120 (120kw) - 2013 - 6 months warranty GRAC 125 (120kw) - 2012 - 6 months warranty IFGAV 200 (200kw) - 2024 - 12 months warranty GR1AV 480 (480kw) - 2013 - 6 months warranty