alpha used for sale

Size: 760 x 330 mm Equipments: Delivery mode: Automatic delivery Infeed size max 1 up: 760 x 330 mm Pile height max: 160 mm Infeed height max: 1,000 mm Sheet size min: 80 x 95 mm Infeed size max 2 ups: 350 x 330 mm Built-in controller Sheet size max: 760 x 330 mm Infeed height min: 400 mm Mechanical speed max: 15 - 205 m/min Pile/Stack height min (Stapelhöhe): 3 mm

: 0400 mm : 1250 mm : : 200 mm : 55 mm : 315 mm : 2700 U/min : D1-6 DIN 55029 : 73 mm : 140 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Traverse Method X Axis Sheet Traverse Y Axis Head Traverse Axis Traverse Distance 2520 x 1550 x 300mm (Z Axis) Max. Sheet Size (including 1 reposition) 5040 x 1550mm Max. Guaranteed Material Thickness: 9mm Mild Steel 9mm Stainless (Oxygen Cut) 9mm Stainless (Clean Cut) 8mm Aluminium (A5052) Max. Material Weight 330Kg Max. Feed Speed 80m/min(X & Y Axis) 60m/min (Z Axis) Laser Cutting Speed 0 ~ 20m/min Positioning Repeatability /- 0.005mm Axis Drive (X, Y & Z) AC Servo Motor Workchute 1550 x 550mm Assist Gas 3 Ports, automatic control Electric Power Required (Includes Oscillator) 65KVA 400V /- 10% 50Hz Air Required Machine Only 6.0 Kgf/cm² 850 l/min Machine Length 5700mm Machine Height 2275mm Machine Weight 6.4 tonnes

Axis travel X: 2520 / Y: 1550 / Z: 300 Max processing dimension 5040 x 1550 (with repo)

3000 x 1500mm (with reposition)

X axis: 550 mm Y axis: 370 mm U axis: 120 mm V axis: 120 mm Z axis: 310 mm Fast forward (X, Y, Z / U, V): 900 mm / min / 450 mm / min Max work piece weight: 1000 kgs Power: 13 KVA Year 2002 Equipped with: Control: FANUC 180 iS-W Refrigerator: Yes

table length: - mm table width: - mm ampere: A total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 5.900 mm table width: 3.640 mm x-travel: 2.500 mm y-travel: 5.000 mm z-travel: 1.500 mm weight of the machine ca.: 870 kg dimensions of the machine ca.: 5.900 X 3.640 X 4.555 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 762 mm, 410 mm, 460 mm

Travel X-axis 762 mm Y-axis 410 mm Z-axis 460 mm Clamping table Table clamping surface 910x380 mm Max. table load 660 kg Head Spindle speed 20-11000 rpm Spindle holder BT 40 Spindle drive 11 kW Feed Feed X/Y/Z axis 12/12/10 m/min Rapid traverse X/Y/Z axis 36/36/30 m/min Tool changer Number of tools 20 Control Mitsubishi M 70V, electronic handwheel Coolant Coolant tank 150 lt. augers Chip conveyor, coolant through the spindle Accessories Blum TC54-20 Tool Measurement Note The shooting tools, tool holders and cutting tools shown in the pictures are not included

Key data: 800 mm, 620 mm, 520 mm

Control Heidenhain iTNC 530 Travel: X-axis 800 mm Y-axis 620 mm Z-axis 520 mm Clamping surface: 1,150 x 600 mm Mounting: SK 40 Tool magazine: 30 compartments Speed range: 30 – 8000 rpm Accessories - Screen filter system KM 350 - Scraper belt conveyor

Key data: 700 mm, 400 mm, 330 mm

Vertical CNC Machining Center/Drill Tapping Center CNC control Fanuc 16i-MB Table size 410 x 850 mm Table load 250 kg Number of pallets: 1 X-axis travel 700 mm Y-axis travel 400 mm Z-axis travel 330 mm 4. Axis (rotary table) 4+5 Spindle mount MAS BT 30 Spindle speed 10,000 rpm Magazine capacity 21 If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other listings for a full overview of our stock.

Description: Serial  , ,Number: 4558175 Working Hours: 31500 Turbine new Laser power: 4,0 kw Working Range: X: 2520 mm Y: 1550 mm Z: 300 mm Table loading capacity: 330 kg , Machine was dismantled by AMADA and now is stored , table length: 2,520 mm, table width: 1,550 mm, laser capacity: 4 kW, weight approx.: 7,700 kg, Approx. Onsite Dimension. (l x w x h): 57,545 x 2,630 x 2,789 mm

Description: Control: CNC FANUC 16W Automatic threading Maximum workpiece dimensions: 650 x 420 mm Maximum workpiece thickness: 160 mm Max. workpiece weight: 350 kg Stroke (X-,Y-,Z-axis): 320 x 220 x 180 mm Table displacement speed: 900 mm/min Wire unwinding speed: 0 - 10 m/min Wire tension: 80 to 2500 gr Wire guide: Ø 0.25 mm Container capacity: 260 l Accessories: Cooling unit Lubrication tank with pump Documentation weight approx.: 1,900 kg, Approx. Onsite Dimension. (l x w x h): 3,200 x 2,200 x 2,000 mm

Description: 'Contact roller 150 mm D, 90° Shore Air sanding pad with automatic insertion and removal Rigid sanding pad for solid wood frame sanding Brush roller driven by the sanding unit Automatic centering of the feed carpet Feed table with high-quality rubber circular perforated carpet and automatic carpet centering Pneumatic sanding belt tensioning with length compensation Non-contact sanding belt oscillation, electronic Low-wear disc brake system for immediate stop of sanding belt drive with pressure monitor , Motorized thickness adjustment with digital display Workpiece thickness limiter at infeed Semi-automatic workpiece thickness adjustment Grit thickness compensation for contact roller 4-fold Incl. vacuum fan Technical data: max. working width 1100 mm max. workpiece thickness 160 mm min. workpiece thickness 3 mm Sanding belt dimensions 2150 x 1120 mm Sanding belt speed 18 ...

IRAC SR MINI EVOLUTION printing screen washing machine was built in Italy in 2017. The machine is used in the process of semi-automatic cleaning of printing screens using room temperature solvents. The offer includes: – printing screen washing machine: IRAC SR MINI EVOLUTION 1000X1000 LST (2017). – solvent distiller with air tank: IRAC ALPHA 50/R (2017) The SR MINI EVOLUTION screen washing machine is equipped with a fully programmable pneumatic control system, allowing easy management and optimisation of the machine’s working phases. Directly directed nozzles deeply clean the entire surface of the printing screen, which is then rinsed and blown off. A high level of safety in the use of the printing screen washing machine is ensured by the fully hermetic design, guaranteeing no emission of harmful fumes. The ALPHA 50/R solvent distiller is an economical and environmentall ...

x-travel: 5500 mm y-travel: 2750 mm z-travel: 1500 mm total power requirement: kW weight of the machine ca.: 20 t dimensions of the machine ca.: 8x4,5x4,2 m Measuring column, longitudinal movement, X Axis 5,500 mm Measuring slide, cross, as Y Axis (measuring head) 2,750 mm Measuring slide, vertical, as Z Axis (vertical) 1,000 mm Adjustment of measuring head, roll axis 360 ° Measuring table 5,000 x 2,500 x 350 mm Weight, approx. 20,000 kg Space required 8,000 x 4,500 x 4,200 mm Accessories / Special Features : o RENISHAW 3D probe head with rotating-tilting device, operating depending on orientation. o Universal 3D Measuring Software, CHOROS Version 5.2 with DEC Software, OPEN VMS Alpha ADL, Version 6.1 with various additional SEC Software, OVMS Base, NAS 150, Cluster, OPEN 3 D, Version 2.5, etc. for manual or automatic measuring of ruled geometry and freeform surfaces, ideally  ...

We offer here a contour measuring device from MITUTOYO, this device received maintenance and calibration from Mitutoyo in November 2022. Included is the complete control with PC, monitor and software Formtracepak MITUTOYO Contour Measuring Machine SV-3000 CNC ROUGHNESS TESTER MITUTOYO Contracer Extrem-SV-3000 CNC SURFTEST SV-3000 CNC 178-544-2 TECHNICAL DATA Range X-Axis: 8" / 200mm Resolution X-Axis: 1.97μin / .05μm Measuring Method: RT Linear encoder X-axis Drive speed (max. CNC): 7.87in/s / 200mm/s X-axis Drive speed (manual joystick): 0 - 2.0in/s / 0 - 50mm/s Measuring Speed: .00078 - .078 in/s / .02 - 2 mm/s Traversing Direction: Backward Alpha-axis resolution: .000225° Alpha-axis rotating speed: 1rpm Column resolution: 1.97μin Column Resolution: 0.05μm Z2-axis Measuring Method: RT Linear encoder Cjycziziin Column Z2-axis drive speed (max. CNC): 7.87in/s ...

We offer here a contour measuring device from MITUTOYO, this device received maintenance and calibration from Mitutoyo in November 2022. Included is the complete control with PC, monitor and software MITUTOYO Contour Measuring Machine SV-3000 CNC ROUGHNESS TESTER MITUTOYO Contracer Extrem-SV-3000 CNC SURFTEST SV-3000 CNC 178-544-2 TECHNICAL DATA Range X-Axis: 8" / 200mm Resolution X-Axis: 1.97μin / .05μm Measuring Method: RT Linear encoder X-axis Drive speed (max. CNC): 7.87in/s / 200mm/s Cjycziziin X-axis Drive speed (manual joystick): 0 - 2.0in/s / 0 - 50mm/s Measuring Speed: .00078 - .078 in/s / .02 - 2 mm/s Traversing Direction: Backward Alpha-axis resolution: .000225° Alpha-axis rotating speed: 1rpm Column resolution: 1.97μin Column Resolution: 0.05μm Z2-axis Measuring Method: RT Linear encoder Column Z2-axis drive speed (max. CNC): 7.87in/s / 200mm/s Z ...

Takang TKV-860-HT CNC Twin Spindle Vertical Turning Center Year 2015 . GENERAL SPECIFICATIONS Max. Cutting Diameter: 800 to 1000mm Max. Swing Diameter: 1000mm Max. Cutting Length: 860mm Spindle Motor (FANUC aP40): (2) 50 HP Alpha P40 2-Speed Gearbox Motors Spindle Speed Range: 10-1500 RPM Spindle Nose: A2-11 Spindle: Spindle Motor (FANUC aP40): (2) 50hp Alpha P40 2-Speed Gearbox Motors Spindle Speed Range: 10 - 1,500rpm Max Chuck Diameter: Installed 31.5" 3- Jaw Hydraulic Chucks Spindle Nose: A2-11 Front Bearing Diameter: 7.87" Spindle Bearings: Double Row Cylindrical and Angular Contact Spindle Speed Selection: Direct RPM Programming Spindle Speed Override: 50% ~ 200% Speed Range Shift: 2- Speed Gearbox Programmable High-Low Range Axis Drives: X Axis Travel (FANUC a22/3000i AC 4.0 HP): 18.31" Z Axis Travel (FANUC a22/3000iB AC 5.0 HP): 33.07" X Axis Thrust Force: ...

Machine Details Warehouse number 1105-03722 Machine type Deep hole drilling machine Make IXION Type TL 500 SVA Year of construction 1985 Control type CNC Control CNC Bosch Alpha Storage location HAGUENAU Country of origin GERMANY Delivery time immediately Freight base from stock Technical details Core drilling diameter - max. 1.5 - 18 mm Drilling depth 600 mm Clamping table, rigid 700 x 1,350 mm Clamping surface of the rotary table 1,000 x 500 mm Longitudinal movement of the table 600 mm Table displacement in drilling direction 400 mm Table rotatable 180 ° Vertical adjustment of the drill carriage 250 mm Drilling unit swivel +/- 15 ° Spindle cone MK 3 Number of speeds 8 Speed range 240 - 2,400 rpm Control CNC Bosch Alpha Motor power 1.0 / 1.6 kW Total power requirement 10 kVA Machine weight approx. 1.35 t Space requirement approx. 2.0 x 1.5 x 1.8 m Infor ...

Controller, Ecograph, Alpha-Log, Data Recorder, Recorder, Color Hybrid Recorder -Endress Hauser: Alpha-Log color hybrid recorder with accessories -Recorder: Type RSA10-31B1T -Isolation amplifier: RN 221 -Modbus: RS 485 -Thermometer: TST 10 -Pressure transmitter: PMC 133 -Individual components: see photos -Price/handover: complete -Transport dimension: 500/500/H200 mm -Weight: 11 kg

2 pcs universal consol framing machine CSEPEL MU5, table 1600 / 500 mm, 1190 / 650 / 470 mm, Bosch Alpha 3/3

DEAR'S SALE, ALPHA MAN L&V 28/32 COMPLETE ENGINE & SPARE PARTS 12V CRANKSAFT STD 6L CRANKSAFT STD LINER, PISTON, FULL COVER, CONROD... ANY PARTS Brgds info@kscege.com

Continuous Juice Pasteurizer Pasteurization Plant Pasteurizer 8500 ltr/h used heat pasteurize pasteurize cool juice durable make flow heater continuous paste sterilizer used. The pasteurizer plant was used for pasteurizing and cooling back drinks and apple juice. Manufacturer: Anlagenbau AG Worb Power approx. 8500 liters per hour Built c. 2001 0.6 m2 / 117 kW / max. 120 °C Including: - Pipe heat exchanger/tube heat exchanger and plate heat exchanger - 1x stainless steel tank with lateral rubging agitator - 1x pump type R905-2W - 1x stainless steel coolant compensating tank Odenwald Y.O.M. 1992, volume 112 liters. - Buffer tank - 3x Alpha Laval centrifugal pumps, type LKH114155 (11 kW) & type LKH113555 (7.5 kW). - Stainless steel switching/control cabinet Room requirement complete system approx. 6000 x 4400 x 3700 mm The plant has already been dismantled and  ...

Pester PEWO-fold 1 overwrapping machine for single cartons and carton collations, in OPP-, PVC-, PE-materials, with foil width from 90 mm to 300 mm, film thickness from 0.02 mm to 0.05 mm, maximum roll diameter 350 mm. Size range min. 60 x 60 x 20 mm, max. 400 x 350 x 140 mm, Machine controlled using ELAU/Schneider PacDrive, Electrical connection 3x400V, V+N+PE/50-60 Hz, connected load 5.2 kW/12.5A, Operating pressure 4 bar, compressed air 4 to 10 bar. Infeed height approx. 900 mm, outfeed height approx. 900-950 mm. Output up to 60 cycles/collations per minute. Includes: Infeed conveyor, 1100 mm long x 260 mm belt width, outfeed conveyor, 2000 mm long x 260 mm belt width, Alpha Compact labeller, PEWO-collect collating table, miscellaneous sets of format parts

10 units configuration: unit 1 + drying unit + unit 2 + unit 3 + unit 4 + drying unit + unit 5 + unit 6 + coating unit + extended delivery Komorimatic with Technotrans Alpha C, S-APC, PQC, rollers-and blanket wash up device, without impr. cylinder wash up device, Anilox coating unit, extended delivery, ink temperature control, Antistatic device, Special device for printing plastic in feeder, UV rollers, ink agitators, 4 x IST UV interdeck dryer with 1 lamp each, all 4 drying units have 2 interdeck positions each, IST UV end dryer in delivery with 2 lamps

x-travel: 164 mm y-travel: 210 mm z-travel: 70 mm Control: CNC 6000 turning speeds: 40000 U/min tool adaptor: HSK E 25 tool change unit: 7-fach total power requirement: kW weight of the machine ca.: 0,9 t dimensions of the machine ca.: 2,3x1,0x1,9 m HSC Milling Machine Portal stand construction for milling and engraving High-frequency spindle HFS 301 40,000 min-1, 3000 watts, HSK 25 E recording Tool length scan Laser sensor system for measuring the workpiece length and workpiece diameter NC controlled part head CNTK 200 center height: 200 mm Clamping device of a groove table Clamping device for clamping round components Coolant circulation system Collet holder Alpha CAM software (AC Mill 2D) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

GeneralHorizontal Machining Centre; Control: 3D Control Siemens 840D solutionline Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal700 mmCross700 mmVertical700 mmMiscellaneousClamping SystemHSK-A 63 CabineFull protection cabinMain driveDrive power (100% DC) 20 kWDrive power (40% DC) 20 kWSpeed range - 12000 rpmSpindle taper HSK-A 63NC rotary table with pallet changerType of Measuring system Direct measuring systemTable surface 500 x 500 mmCentre bore 50 mmMaximum load (table centre) 600 Kg4. Axes (swivelling range) 360 x 0,001 degreeRotation speed max.4. Axis 40 rpmDistance between T-Slots 100 mmNumber of Slots 5Slot width 14 mmSpindle taper HSK-A 63Spindle taper for HSK-A 63 to DIN 69893 (incl. adaptation working spindle, tool changer and tool magazine)Tool magazine, cha ...

GeneralHorizontal Machining Centre; Control: 3D Control Siemens 840D solutionline Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal700 mmCross700 mmVertical700 mmMiscellaneousClamping SystemHSK-A 63 CabineFull protection cabinMain driveDrive power (100% DC) 20 kWDrive power (40% DC) 20 kWSpeed range - 12000 rpmSpindle taper HSK-A 63NC rotary table with pallet changerType of Measuring system Direct measuring systemTable surface 500 x 500 mmCentre bore 50 mmMaximum load (table centre) 600 Kg4. Axes (swivelling range) 360 x 0,001 degreeRotation speed max.4. Axis 40 rpmDistance between T-Slots 100 mmNumber of Slots 5Slot width 14 mmSpindle taper HSK-A 63Spindle taper for HSK-A 63 to DIN 69893 (incl. adaptation working spindle, tool changer and tool magazine)Tool magazine, cha ...

GeneralHorizontal Machining Centre; Control: 3D Control Siemens 840D solutionline Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal700 mmCross700 mmVertical700 mmMiscellaneousClamping SystemHSK-A 63 CabineFull protection cabinMain driveDrive power (100% DC) 20 kWDrive power (40% DC) 20 kWSpeed range - 12000 rpmSpindle taper HSK-A 63NC rotary table with pallet changerType of Measuring system Direct measuring systemTable surface 500 x 500 mmCentre bore 50 mmMaximum load (table centre) 600 KgRotation speed max.4. Axis 40 rpmDistance between T-Slots 100 mmNumber of Slots 5Slot width 14 mm4. Axes (swivelling range) 360 x 0,001 degreeSpindle taper HSK-A 63Spindle taper for HSK-A 63 to DIN 69893 (incl. adaptation working spindle, tool changer and tool magazine)Tool magazine, cha ...

Description Conversion kit high-speed cutter Wohlenberg from Monitor Tube chassis system 85/86/90 to LCD chassis The following steps are necessary for the conversion to LCD: 1. Disassemble the monitor chassis 2. Remove the picture tube and circuit board (ventilate the tube properly, dispose of) 3. Function keys, alpha keyboard is retained (if available) 4. New LCD chassis, loosen nuts and lift the frame 5. Insert chassis from behind, attach front bezel and screw it in place 6. AMP connector from the CPU unplug, eject contacts 7. Set the voltage on the potentiometer to 12 volts 8. Press in new pins after enclosed pin assignment 9. For System 86/90, pinch off the crimp contacts and insert them into the pin header 10.AMP connector System 85 / Plug in pin header on System 86 11.For System 86/90, tap the voltage on the switching power supply (snap terminals) 12.Settings of the LCD monitor are ...

GeneralHorizontal Machining Centre; Control: 3D Control Siemens 840D solutionline Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal700 mmCross700 mmVertical700 mmMiscellaneousClamping SystemHSK-A 63 CabineFull protection cabinMain driveDrive power (100% DC) 20 kWDrive power (40% DC) 20 kWSpeed range - 12000 rpmSpindle taper HSK-A 63NC rotary table with pallet changerType of Measuring system Direct measuring systemTable surface 500 x 500 mmCentre bore 50 mmMaximum load (table centre) 600 KgRotation speed max.4. Axis 40 rpmDistance between T-Slots 100 mmNumber of Slots 5Slot width 14 mm4. Axes (swivelling range) 360 x 0,001 degreeSpindle taper HSK-A 63Spindle taper for HSK-A 63 to DIN 69893 (incl. adaptation working spindle, tool changer and tool magazine)Tool magazine, cha ...

Year 2000 Iinstall 2001 Max web width: 48” (1219,2 mm) Impression cylinder circumference: 69” (1752,6 mm) Product size: 219 x 304,8 mm Only 21 mill impressions (genuine) Produces: 128 pages of 8 3/8” x 11 1/4 or smaller every revolution Great for books,bibles or coloring books Equipment: 2 Megtec auto-pasters dlp width 1270 Two web guide unit with double timson indeed unit 2 Units blanket to blanket print units Timson brush dampening system Complete chiller system with circulation 2 Technotrans alpha d cooling devices 1 Folder type m3c/4-2dSstitching system streamliner 2000I Ink pump (200 lit. deposit) Ink agitators Console cdps 1 Extra set of brand new rollers Extra spare partsI Ink remote control system with console Grafikontrol system Tipografic ink unit for second color (logo´s,etc…) 4.645 hours on production Plate bender Rima stacker Free of any ...

Vertical machining center FANUC Robodrill Alpha T21iC 2002 ISO30 14 tools 8000 RPM X 500 Y 380 Z 300 CNC Fanuc 16iM The machine can be inspected in our warehouse in Gussago BS. Mimu Machine Tools Gussago BS Italy The machining center is a machine tool equipped with numerical control capable of performing multiple mechanical operations with a single set-up on multiple surfaces of the same workpiece. It is generally equipped with several axles of motion and a automatic tool exchange system and sometimes multiple pallets, X axis: 500, Y axis: 380, Z axis: 300, CNC type: Fanuc

Vertical machining center FANUC Robodrill Alpha T14iA ISO30 14 tools 8000 RPM X 500 Y 380 Z 300 CNC Fanuc 16iM The machine is visible in our warehouse in Gussago BS. Mimu Machine Tools Gussago BS Italy The machining center is a machine tool equipped with numerical control capable of performing multiple mechanical operations with a single set-up on multiple surfaces of the same work piece. It is generally equipped with several axles of motion and a automatic tool exchange system and sometimes multiple pallets, X axis: 500, Y axis: 380, Z axis: 300, CNC type: Fanuc

Bosch Diffusion Welding Machine The product is an in-house production of Bosch and was used for diffusion welding of anchors. If necessary, the machine can also be used elsewhere. Manufacturer: Bosch Type: Diffusion welding machine for anchor among other things, the following components are installed. Bosch BT 5 Rexroth BT 6 Alpha SP 0755-mf2-100 Aventics 0822395006 Rexroth PST 6000 Quint Power Phoenix Contact 24V 10A Rexroth DKC10.3-008-3-MGP -01VRS Year of construction: 2005 Condition: used Complete plant closure, large selection of mezzanines, pallet racks, shelves, paternosters. High-quality industrial machines, lathes, grinding machines, manual machines

Key data: 550 , 92 , 32

Manufacturer: Boy Type: 55 AVV Year of construction: 2012 Control: Procan ALPHA Clamping force: 550 kN Type of lock: Hydraulish Spar spacing: 360 mm x 335 mm Plate size: 565 mm x 540 mm Tool installation height: min 250 mm Opening distance: 300 mm Plate spacing max.: 550 mm Screw: 32 mm Stroke volume: 96.5 ccm / 92.3 gram HP Injection pressure: 2127 bar General Motor: 11 kW Heating: 7,7 kW Dimensions: 3 m x 1.2 m x 3.7 m Weight: 2700 kg Screen text: German / English / French Additional equipment Robot interface

Product number: 2535 Type: Foodliner 12000/8 Serial number: WK43/07 Year of construction: 2008 Capacity: 18000 - 22000 cups/hr Cups: round Ø 55 mm, round Ø 65 mm Seal: aluminium Compressed air: 6 Bar, 800 l/min. Water: 3 Bar, 1.5 l/min. Power: 3 x 400V, 50Hz, 15kW Dimensions: 4250 x 2000 x 1800 mm Weight: 3500 kg Including Alpha Machine Vision Solution lid inspection system Including tool trolley

– after technical inspection – very good condition – German production – year of production 1996 – segmented shoe - the perfect solution for varnish / veneer TECHNICAL PARAMETERS: grinding width 1100 mm grinding height 1-150 mm Combo unit with task-controlled membrane grinding shoe aggregate motor power 11 kW blowing on the tape pneumatic oscillation two types of belt speeds of 4.5 and 18 m/s Aggregate with felt shaft engine power 0.75 kW shaft oscillation Unit with cleaning brush engine power 0.75 kW smoothly adjustable feed feed speed range 4-18 m/min feed motor power 1.5 kW electric height adjustment vacuum table fan motor power 3 kW connector diameters 4 x 120 mm, 1 x 150 mm transport dimensions (L/W/H) 200 x 245 x 210 cm weight 2500 kg 1. The Alpha Combi unit is a grinding unit with a contact shaft with a dia ...

This is a completely new Handheld XRF Gun in full working order ready for use still in factory warranty. It has a great performance comparible to XRF such as Thermo Niton, Olympus Vanta or Bruker Titan or even other ED X-Ray Benchtop Spectrometer like Spectro Midex, Thermo Scientific, Bruker Mistral or Fischerscope. Original price of the system is more than 30.000Euros. It can analyze Precious Metals and Catalytic Converters very fast in 30sec. It is sold because we do not use it as much. SciAps X-505 Precious Metals Analyzer. Part No 910-500066 PM. Ultra lightweight X-ray analyzer featuring tapered, ergonomic design ideal for testing requirements. The X-505 utilizes a miniaturized X-ray tube, Rh anode (50 kV, 200 uA, 5 W) and high resolution, high count rate silicon drift detector (25 mm2 SDD, 140 eV at 5.95 Mn K-alpha line, at 90+% live time, 250k cps) for fast alloy chemistry  ...

Hypoid gearbox, I=175, TPK+050S-MF3-175-0E1-1S11, Wittenstein, new -40% Special price The current new price of a similar product is € 4,565 excl. VAT. We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Top condition like a demonstration unit The part was removed from a new machine that is proven to have run only about 100 hours of operation. Technical data: - Low backlash Wittenstein hypoid gearbox (alpha Advanced Line) - Type: TPK+050S-MF3-175-0E1-1S11, I=175, - Suitable for servo motor attachment Siemens 1FK7042-2AF71-1CH1, - Free additional flange, see photos - Motor side: Centring D81mm, for motor shaft D19mm, plug-in sleeve, - Gearbox: Centring D140mm, pitch circle D168mm x z12, - Additional flan ...

Hypoid gearbox, I=500, SPK+100S-MF3-500-0E1-1S11, Wittenstein, new -40% Special price The current new price of a similar product is € 3,430 excl. VAT. We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Top condition like a demonstration unit The part was removed from a new machine that is proven to have run only about 100 hours of operation. Technical data: - Low backlash Wittenstein hypoid gearbox (alpha Advanced Line) - Type: SPK+100S-MF3-500-0E1-1S11, I=500, - Suitable for servo motor attachment Siemens 1FK7042-2AF71-1CH1, - Motor side: centring D81mm, for motor shaft D19mm, plug-in sleeve, - Gearbox: centring D90mm, shaft D32mm, Attention: We have the complete winding drive, rewind drive D75mm an ...

Here we offer a well-maintained injection moulding machine. Manufacturer / Type:BOY Type: XS (100-14) Serial No.:will be communicated in case of interest Year of manufacture:2015 Operating hours:25.000 h Version:Procan Alpha 2 / S1 Clamping unit Clamping force:100kN tie bar distance:160 x 110mm (2 tie bars) Mould installation height min.:100mm Platen distance max:250mm Ejector stroke:50mm Injection unit: Injection unit:cylinder ø14mm Shot weight max.:6,1 g/PS Injection flow:22g/sec Spec. injection pressure:2298 bar Sprue extractor integrated Dimensions & weights: Weight with control cabinet: 485 kg. Length: 1480mm Width (machine only):520mm Height min - max:1380 - 1690mm Oil capacity:28 L The visible mini-laminar flow unit and the stainless steel area cover belong to the machine Other possibly visible peripheral devices do not belong to t ...

For sale: Multi-axis CNC lathe from Hyundai-Wia type LM 1600TTSY + LNS 3-meter bar magazine type Alpha 552. Beautiful versatile CNC lathe with lower and upper turret with 12 positions and intermediate positions each. The upper turret is additionally equipped with a Y-axis with a displacement of 100 mm (+50, - 50 mm). The machine is equipped with two identical spindles with a bar passage of 51 mm and a maximum speed of 6,000 rpm. The maximum turning diameter is 230 mm and the maximum turning length is 705 mm. Driven tool holders can be stored in all positions! The maximum speed on the driven tool is 5,000 rpm. The main motor power on both spindles is 15/11 kW and they are built-in spindle motors! The machine is also equipped with an automatic tool presetting device, a workpiece collecting device, a workpiece extractor for the right spindle, a workpiece discharge conveyor for the finished  ...

KBA Rapida 76-5 + L SAPC ALV2 UV Age: 2012 Counter: 105 mio. Impression Max. size: 60.5 x 75 cm Printing format max.: 59.5 x 74 cm Max. paper thickness: 0.8 mm Max. performance: 18,000 sheets/hour Equipment: 5x printing units 5x UV Interdeck Drivetronic SIS Airtronic Cleantronic Air Control Alcolor Technotrans Alpha.C cooling device Ink temperature control Semi Automatic Plate changing system Automatic washing devices Harris & Bruno Coating Unit with Anilox 13 cm3 Extended Delivery IR and UV Dryer with 2 lamps Powder Sprayer Nice to know: -Machine is equipped with standard rollers -All Units have UV-Interdeck -UV system is classic. No LED -Machine has 5 power supplies for UV lamps and 5 UV lamps. They can be used in any configuration on machine.

Komori Lithrone LS 529 H-UV Age: 2015 Counter: 70 mio. Impression Format: 53 x 74 cm Substrate thickness: 0.06 – 0.8 mm Printing Performance: 16,000 sheets/h Equipment: 5 color machine Straight machine FAPC (Full Automatic Plate Changer) Komorimatic Dampening System Technotrans alpha.c with alcosmart Ink temperature control Automatic washing devices (Ink roller, Blanket, impression) Komori PQC-S (Print Quality Control System) Komori KHS-AI (KHS Advanced Interface for very short Make readies with minimum paper waste) Komori AMR (Automatic Make Ready) Komori Self Diagnosis Komori Smart Feedback Komori PCC 2.3x Komori PDC-SII (Print Density Control-Spectrodensitometer) Ultrasonic Double Sheet Detector Skeleton Transfer Cylinder Double-sized Impression- and Transfer Cylinder Cardboard Printing H-UV Dryer Baldwin Air Blast Cooler for UV-lamps High Pile Delive ...

Servo motor with brake and pulse coder FANUC ALPHA 6/3000 ( ALPHA6/3000 ) A06B-0128-B675 B-65142E 1,4 kW 3000 rpm 114 V Shaft: Ø 19 mm Flange: 130 x 130 mm New ! Dimensions: 365 x 130 x 175 mm

Gearbox, planetary gear ALPHA SP 100-MF1-7-121-000 Gear ratio ( i ): 7 input: coupling for shaft diameter: Ø 19 mm, shaft length: 40 mm flange: 100 x 100 / Ø 70 mm bolt circle diameter: Ø 95 mm, 4x threaded hole: M8 x 1.25 output: Shaft diameter: Ø 32 mm, shaft length: 58 mm, groove width: 10 mm shaft thread ( inner ): M12 x 1.75, depth: 40 mm flange: 102 x 102 mm / Ø 90 mm bolt circle diameter: Ø 120 mm, 4x bore: Ø 9.0 mm adapter plate (stainless steel): Ø 159 / 136 / 90 mm bolt circle diameter: Ø 147 mm, 8x bore: Ø 6.5 mm Material (housing): Steel used, tested ! Dimensions: 195 x 160 x 160 mm

Planetary gear ALPHA SP 100-M1-7 ( SP100-M1-7 ) i = 7 hollow shaft Drive: Ø 18 mm flange drive: 101 x 101 mm shaft Output: Ø 32 mm flange output: 101 x 101 mm, Ø 90 mm used, tested ! Dimensions: 205 x 105 x 105 mm