alpha used for sale

Used High-speed Horizontal form-fill-seal machine Fuji Alpha VII 3430 is specifically designed to package various sizes of product for a variety of industries. Machine type :FW3430/B End sealer diameter : B125 Capacity :10 to 100 packs/min Cut length: 130 to 430 mm (Up to 3,999 mm according to the spec.) Product size to be wrapped Width: Up to 170 mm Height: Up to 30 mm Wrapping film width: up to 650 mm Outside diameter: up to 300 mm Wrapped products properties: Individual food, chemicals or manufactured products Wrapping materials properties: Film which can heat and seal Motor capacity: 3.39 kW Heater capacity: 3.15 kW Electric supply source Three-phase AC 200 V 50/60 Hz 30 A (Transformer for other voltage included) Power consumption 6.54 kW

Vertical machining center Fanuc Robodrill Alpha T21i EL Year 2007 CNC Fanuc 31i Tool holder BT 30 Spindle power 5.5 Kw Spindle RPM 24000 HSC (high speed) yes Number of tools 21 X 700 mm Y 400 mm Z 330 mm Rapids X Y Z 54 m / min Table dimensions 850 x 410 mm Fourth axis Kitagawa MOD. MR200 Flange diameter 200 mm Continuous rotation, 360000 positions Renishaw TS27R presetting DIMENSIONS AND WEIGHT Length 2115 mm Width 2027 mm Height 2336 mm Weight 2100 Kg Under power in our warehouse - test possible Mimu Machine Tools (Italy) Gussago BS Italy The machining center is a machine tool equipped with numerical control capable of performing multiple mechanical operations with a single set-up on multiple surfaces of the same work piece. It is generally equipped with several axles of motion and a automatic tool exchange system and sometimes multiple pallets, Spindle speed RPM: 24000

Inv. Num. : 6136 Type: CTX alpha 5000 Producer: DMG Gildemeister Created: 2008 Parameters: Control system: Siemens 840 Operating hours: 22803 h Switching-on hours: 11505 h Maximum turning length: 500 mm Maximum turning diameter: 200 mm Maximum turning diameter over bed: 500 mm Distance between tips: 780 mm Maximum spindle speed: 6000 1/min Maximum workpiece weight: 45 kg Weight: 4500 kg Equipment: Filtration Bar Loader CNC Spacesaver SS 2500 (2018)

FANUC Robodrill Alpha T14iB vertical machining center from the year 2000 currently working. It is equipped with a Fanuc 16i-M CNC control unit. The machine has a spindle speed of 15000 rpm. Machine weight: 2100 kg CNC

Comal Alpha 160/20 2050 Plate Rolling Machine Machine can be seen under power

CNC lathe GILDEMEISTER CTX ALPHA 300 with bar feeder and parts pick-up device Built in 2010 in good condition. Duty Cycle: 22930 Hours: 7326 Control Heidenhain CNC-Pilot 640 Circulation over bed: 380 mm Circulation via face slide: 290 mm Spindle bore: 73 mm Flat travel ( X ) : 190 mm Longitudinal travel ( Z ) : 335 mm Speed max. 6000 rpm C-axis 360° Number of driven tool stations 12 pos. Tool holder VDI 30 Accessories: 3 jaw chuck hydraulic 170 mm Conveyor Coolant system Hydraulic hollow clamping device Tool drive C-axis Parts pick-up device Bar Feeder Irco RBK10012 Tailstock

This AMADA LC 2415 alpha 4 NT Laser Cutting machine was manufactured in the year 2011 in France and has 11750 production hours. It is equipped with an AMADA AMNC control unit. The machine has a laser power of 2,5 kW.

This AMADA LC-2415 alpha III Laser Cutting machine was manufactured in the year 2004. It is equipped with a Fanuc FS-160iLA CNC control unit and has 3 axis. The machine has a laser power of 4,0 kW.

This FANUC Robocut ALPHA-0B Erosion machine was manufactured in the year 1995. It is equipped with a Fanuc Series 16-W control unit and has 4 axis. The machine has a wire tension: 0-2500 g.

Fanuc Robodrill Alpha-T14ifb Tapping Machine 10000 rpm 5 inches diving head(Nikken) Machine is in good working condition

Fanuc Robocut alpha-C600ib EDM Wire Cutting Machine Machine is in very good condition Maximum workpiece dimensions [mm]: 1050 × 820 × 300 Maximum workpiece weight [kg] : 1000

Key data: 1360 mm, 1 , 150 mm

Wide belt sander belt sander veneer sander OTT Type: ALPHA 136 one belt combi unit - Calibration loops via roller - Fine grinding with rigid sanding pad - Veneer grinding with insert-controlled air shoe Sanding width up to approx. 135 cm Passage height approx. 3 - 150 mm Cleaning brush at the outlet Motor power 11 KW Total power approx. 13.3 KW Belt speed 18m/sec Feed rate max. approx. .8m/min Dimensions approx. 2.06 x 2.0 x 2.1 m Weight approx. 2600 Kg The machine originates from the age-related abandonment of a small construction and cabinetmaking workshop and is available now. Dismantling and loading can be organized by us. Settlement by appointment. Buyers can also pick up and test the machine themselves on site. Condition see pictures, or please refer to the item description. Parts can also be picked up by yourself. All measuremen ...

Kombi-Falzmaschine - Combination Folder Heidelberg-Stahlfolder KH82-4KTL Year 2010 - Serial-No. FH.ERCA-00434 Palettenanleger / Pallet Feeder PFH-82 Format / Size min. 140 x 180mm Format / Size max. 820 x 1200mm Falztyp / Folding Type: 4 buckles - 2 knives - 1 side buckle Automatische Falztascheneinstellung / automatic buckles setting Speed 50.000 Cycles/hour Digitaler bildschirm / Digital Display Inklusive Kompressor / include Compressor Inklusive Handbuecher / Included Manuals Auslage / Delivery Palamides Alpha 500 Plus Year 2011 - Serial-No. 2502 Arbeitsbreite max. 510mm / Working width max. 510mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test

Stapelauslage / Stacking Delivery Palamides Alpha 700 Plus Baujahr / Year 2011 - Serial-No. 2502 Minimalformat / Size minimum 120mm x 90mm Maxmimalformat / Size max. 330mm x 510mm Stapelhoehe / Stack height 10 - 160mm Geschwindigkeit / Speed 15 - 200m7min Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test

turning diameter: 240 mm turning length: 500 mm control: Sinumerik 840 D sl Celos swing diameter: max. 510 mm Main spindle:: turning speed range - main spindle: max. 5.500 min/-1 power capacity - main spindel: 14 / 13 kW max. Torque: 192 / 172 Nm inner draw tube diameter: 66 mm C-Axis: 0,001 ° spindle diameter in front bearing: 100 mm max. chucking diameter: 215 mm spindle nose: 140H5 turret:: number of toolpositions: 12 pos. Number of driven toolspositions: 12 pos. tool taper: VDI 30 Spindle speed - driven tool stations: max. 5.000 min -1 power capacity - driven tool-stations: 5,4 kW max. Torque: 18 Nm y-axis: +/- 40 mm axis stroke:: x-axis: 210 mm y-axis: (+/- 40) 80 mm z-axis: 525 mm feeds:: rapid traverse ( X / Y / Z ): 30 / 22,5 / 30 m/min Feed force ( X / Y / Z ): 4,5 / 4,5 / 7,5 kN total power requirement: 20 kVA weight of the machine ca.: 4,3 t dimensions of the machine ca.: ...

Forms spiral tubes 1 Sutter Alpha 1 from diam 120 to 1550 thickness from 4 to 12/10 of galvanized sheet Complete with automatic cut 6 m double revolving reel Tapes from 88 to 133 mm can be used.

Key data: 370 mm, 270 mm, 255 mm

Inv. Num. : 7378 Type: ROBOCUT Alpha-0iE Producer: FANUC Created: 2013, GO 2020 Parameters: Control system: FANUC Max. travel length of the X-axis: 370 mm Max. travel length of the Y-axis: 270 mm Max. travel length of the Z-axis: 255 mm Feed length in the U-axis ( -): 60 mm Feed length in the V-axis ( -): 60 mm Minimum wire gauge: 0.1 mm Maximum wire thickness: 0.3 mm Max. workpiece dimensions: 700 x 600 x 250 mm Max. workpiece weight: 500 kg Machine height: 1950 mm Machine length: 2200 mm Machine width: 1930 mm Machine weight: 1200 kg Equipment: Measuring instruments Software

The Alpha SL65 S bar feeder is a simple alternative to bar feeding according to spindle length. It is designed for simple applications, especially for standard production parts, and for medium and large production runs. Rod length: 300 - 1500 (limited by spindle length). Diameter Ø 6 - 65mm. Tank capacity: 600mm. The feeder is still attached and can be seen running.

This DMG CTX Alpha 500 Universal Machining center was manufactured in the year 2017 in Italy. It is equipped with a HEIDENHAIN CNC Pilot 640 control unit. The machine has a spindle speed of 5500 rpm.

This FANUC Robocut Alpha 0iE CNC Wire Cut EDM Machine was manufactured in 2013 and is equipped with a FANUC 31i-WA control. It has 5 axes (X-axis: 370 mm / Y-axis: 270 mm / Z-axis: 255 mm / U-axis: 60 mm / V-axis: 60 mm) and can operate with a maximum workpiece weight of 500 kg. In total it has operated 17,500 hours from which 4,850 are cutting hours.

FANUC ALPHA C600iA - 2014 Wire cutting EDM machine

[embed]https://youtu.be/tU4z-j-vDnw[/embed] FANUC ALPHA 0iB - 2003 Wire cutting EDM machine

Control Fanuc Travels X / Y / Z: 520 x 370 x 410 mm Travels U / V: 120 x 120 mm cooling unit

CNC Portal Laser Cutting Machine Manufacturer: ESAB Type: Alpharex AXC 7000 Built: 1998 CNC control: NCE620 Working range: 5,000 mm x 27,000 mm Laser type: TLF 4000 t Suction table: Beuting without suction

OERLIKON / ALPHATOME II T30 HP300 PPM 400 OERLIKON - Typ: ALPHATOME II T30 HP300 PPM 400 - Baujahr: à 2013. Special features of the ALPHATOME II series / EQUIPMENT: Camera system: Moving camera on the cross-drive carriage for easy positioning and cutting monitoring by the operator from the control panel. The graphic is done by a permanently visible button on the touch screen interface. Protective devices: 7 Facilities for the protection of operating personnel. Photocells in the front and back of the bridge. Emergency stop button on all corners, as well as on the external control panel. Anti-glare-/splash protection: The anti-glare panel of the bridge is raised or lowered automatically or by pressing a button. On the sides, the panel can be opened manually for the burner and wear parts. Furthermore, the noise development is significantly reduced and resulting smoke is bet ...

punching pressure: 16 t plate thickness: 8 mm plate length max.: 1250 mm sheet width - max.: 1000 mm engine output: 13 kW control: Cadman CNC voltage: 400 V weight of the machine ca.: 8,3 t dimensions of the machine ca.: 3600 x 2300 x 2000 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

2-axis universal turning machine with SUPFINA superfinishing attachement Working area swing diameter over guide way protection: 500 mm -- 19,68 in clamping chuck diameter: 170 (210) mm -- 6,69 (8,26) in transverse stroke (X axis): 190 mm -- 7,48 in longitudinal stroke (Z axis): 525 mm -- 20,66 in Feed drive rapid feed, X/Z axes: 30/30 m/min -- 1181,1/1181,1 in/min Y axis 22.5 m/min -- 885.8 in/min Main stock spindle nose size: 140 h5 mm spindle diameter in front bearing: 100 mm 3,93 in spindle bore diameter: 73 mm 2,87 in Main drive AC main drive power (100%-40% ED) 13 - 14 kW 17,42 ? 18,76 HP Torque (100%-40% ED) 171,5 - 192 Nm 126,49 - 141,61 ft.Lb Speed range 20 ? 6000 rpm Electrical connection (5 conductor system, L1, L2, L3, N, PE) connected load, total approx. 30 kVA voltage: 400 V frequency: 50 Hz protection (slow-blow) acc. to VDE 0100: 63 A perm ...

2-axis universal turning machine with SUPFINA superfinishing attachement Working area swing diameter over guide way protection: 500 mm -- 19,68 in clamping chuck diameter: 170 (210) mm -- 6,69 (8,26) in transverse stroke (X axis): 190 mm -- 7,48 in longitudinal stroke (Z axis): 525 mm -- 20,66 in Feed drive rapid feed, X/Z axes: 30/30 m/min -- 1181,1/1181,1 in/min Y axis 22.5 m/min -- 885.8 in/min Main stock spindle nose size: 140 h5 mm spindle diameter in front bearing: 100 mm 3,93 in spindle bore diameter: 73 mm 2,87 in Main drive AC main drive power (100%-40% ED) 13 - 14 kW 17,42 ? 18,76 HP Torque (100%-40% ED) 171,5 - 192 Nm 126,49 - 141,61 ft.Lb Speed range 20 ? 6000 rpm Electrical connection (5 conductor system, L1, L2, L3, N, PE) connected load, total approx. 30 kVA voltage: 400 V frequency: 50 Hz protection (slow-blow) acc. to VDE 0100: 63 A perm ...

: 554 mm : 2000 mm : : 277 mm : 104 mm : 400 mm : 2000 U/min : D1-11 DIN 55029 : 95 mm : 145 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 554 mm : 2000 mm : : 277 mm : 104 mm : 400 mm : 2000 U/min : D1-11 DIN 55029 : 95 mm : 145 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

8 colour units printing width : 1.000 mm material width : 1.050 mm printing lengths : 300- 760 mm Materials LDPE,PP,PA 20- 150 my HDPE,OPP 12- 100 my Laminates up to 150 my Paper: 30- 120 g/m2 Machine mechanical speed: max. 300 m/min (depending on material and print specific factors) Essentially equipped with: Non-Stop-unwind, max. roll D 1.000 mm, inner core D 76 mm Roll lift-in device Splicing unit Web tension measure and adjustment unit Web guide prior to printing, type BST Spreader roller Single-sided Corona pre-treatment for PE, type Softal, incl. ozone obliterator and suction Common steel impression cylinder, Nickel-Plasma coated Temperature unit, type Single lnk circulation with pumps and ink containers Automatie washing system Viscosity control Nip roller prior to 1st colour unit Web Video camera/monitor Operator column PROCONTROL® Dr ...

Center height: 200 mm Center width: 1250 mm gr. Turn-Ø over bed: 400 mm Spindle bore: 55 mm Spindle holder: Camlock D1 6" mm Pick-up cone of tailstock quilts: 5 MK Spindle speeds: 1-297/1-861/1-2700 rpm electr. Connection: 400 V, 7.5 kW Space requirement: 2900 x 1800 x 1500 mm Weight: 2200 kg

We hereby sell a good AMADA laser cutting machine which is in very good condition. The laser machine is sold completely incl. software for programming, machine documents, water chiller, Extraction system and transformer. Specifications: Year of construction: 1998 Switch-on hours: 22.000h Laser Machine LC-2415 C2000 B / Model: LC2415 A2 Model: FANUC C2000 B Nominal laser power: 2000 WATT Max laser power: 2000 WATTS Laser wavelength: 10.6 μm Pulse width: 100μs-cw Steel diameter: >27mm Laser gas consumption: approx. 10l/h Laser protection class 4 Weight: 6.500 kg

used Muller Martini Alphaliner offline inserters for sale Year 1999 Alpahiner 2 into 1 inserter Line speed ca 15,000 cph Muller Martini CN25 stacker Air compressor system Gripper conveyor

x-travel: 700 mm y-travel: 400 mm z-travel: 330 mm Control: FANUC 31iB5 table-size: 850 x 410 mm : 21 fach turning speeds: 10.000 U/min Internal cooling system: 20 bar total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 500 mm y-travel: 400 mm z-travel: 330 mm Control: FANUC 31i-B5 Tools changer: 14 pos. table-size: 850 x 410 mm number of spindle speeds: 24.000 U/min/rpm rapid traverse feeds: 48 m/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Amada Laser 2415 AC with automatic loading/unloading Power : 2kW - 43 kWA Metal size : 1500 x 3000 mm

GeneralTurn- mill machining centre; Control: Siemens sl Operate3G without ShopTurn appr 2 channel Tool magazineNumber of tools38 Max. tool length250 mmMax. tool diameter70 mmMax. tool weight3 KgB-axis Turning-milling spindleSwivelling range+/- 120 degreeSpeed range B3100 rpmAngular value, min.1 degreeTurning-milling spindleSpindle taperCapto C5 Drive power (100% DC)5,5 kWSpindle speed-20000 rpmDrive power (40% DC)7,5 kWTorque (100% DC)22 NmTorque (40% DC)30 Nmangular value, min.5 degreelocking moment700 NmB-axis counter spindlePositioning angle B3-axis, in 5 degree steps0 - 225 degreeSpeed range B340 rpmSlide 3Longitudinal stroke665 mmRapid traverse Z36 m/minSlide 1Longitudinal stroke454 mmTransverse stroke380 mmRapid traverse in X40 m/minY axis, vertical+/- 105 mmRapid traverse in Z50 m/minRapid traverse in Y40 m/minHeadstock, rightClamping chuck Ø140 mmSpindle bore38 mmSpindle diametr ...

Sale directly from the owner! No middlemen! The machine for sale consists of 1 Casemaker 900/2400 Model Servo Drive System (Simca/DY), consisting of: - 1 Investor - 3 flexographic printing units - 1 groove slotting mechanism - 1 folding machine - 1 Valco glue device - 1 counter-ejector - 1 central control - 1 cable tray - 1 set of running rails and 1 prefeeder model 12x25 (Fossaluzza), consisting of - 1 basic machine - 1 autom. Stamp centering So far, the machine has only been test-run, and then dismantled again.

Circulating diameter above the bed: 500 mm Revolving diameter above support: 290 mm Distance between spikes: 780 mm Spindle speed - range: 500 Chuck diameter: 170 mm Max. workpiece weight: 45 kg Largest turning diameter:: 200 mm Maximum turning length: : 500 mm Number of driven tools:: 12

Manufacturer: Fanuc Year of manufacture/SO/GO: 2000/-/- The machine is in good technical condition.

Controls: FANUC Series 16-M.

Speed per head: 2500 characters/s, printing head distance: 1-25mm, character height: 0.8-1.5mm.

Output: 300l/h, output: 300l/h, suitable for the treatment and reuse of rinse water, wash water, paint rinse water, cleaning solutions, waste water from crack testing and other liquid production residues.

There are eight identical label dispense available, speed: 0-80m/min, output: 1000 label/ min, length: 700mm, width: 320mm, height: 500mm, including accessories.

Key data: 500 mm, 400 mm, 330 mm

achine details Stock-No. 1105-03933 Type of machine Machining Center - Vertical Make FANUC-STAMA Type Robodrill T14 ifb Year of manufacture 2010 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Japan Delivery time by arrangement Freight basis EX WORK Technical details x-travel 500 mm y-travel 400 mm Z-Travel 330 mm table surface area 650 x400 mm turning speed range - milling 10000 rpm power capacity - milling spindle 7,5 kW tool taper BT 30 No. of tools in the magazine 14 pieces feed range 1-12000 mm/min rapid motion -longitudinal/cross/vertical 36 m/min total power requirement 10 kW Weight of the machine approx. 2200 kg dimensions of the machine approx. 2000x2400x2600 mm Additional information CNC FANUC 31 i MB 10000 rpm spindle

max. format 33 x 51 cm Year of construction 2003 mobile stacking delivery for mark-free laying Scale or single sheet mode selectable Press station pneumatic Delivery optionally left or right possible Stacking height 3 - 160 mm Price on request. We deliver and install worldwide!