all terrain used for sale

blade length 430mm; 5047

blade length 430mm; 5047

Output: 39,600/h, additional accessories are available.

Output: 24,000/h, band speed: 0.5m/s, format: 0.25l GASTRO/ 0.5l GASTRO/ 0.7l GBD/ 0.75l GBD, GASTRO, with Sorting System HEUFT SPECTRUM SX TI 36, machines were overhauled in October 2021.

There are four HEUFT inspectors available (1) empty container inspector with rejection (2) empty container inspector (3) logo detection with rejection (4) empty bottle inspector with reject table and rejections (5) belts and belt control with the complete motors.

With documentation and pusher, has been regularly serviced, operating hours: 23,476h, the machine has already been dismantled.

High alloy stainless steel round steel, 1.4104, X14CrMoS17, , new -75% We hereby give a bundle of a cold-drawn round steel, 1.4104. - Diameters 15, 20, 25, 30, 35, 40, 50, 60, etc. - Lengths approx. 3 to 3.5m, including some shorter pieces - Sales weight is approx. 800 to 1000kg - Submission as a total item - Before selling, all parts are tested with a spectral analyzer, so we only supply this material. - Pick-up by the customer is also possible - We have set an absolute special price here - If you have a VAT number, we will be happy to issue you with an invoice without VAT. - We have the round steels from a raw material warehouse of a certified company - Factory certificates not available.

Recycling machine trade AGICOM- Pedergnana OG, Technical data of the alligator shears S 900: Knife length: 900 mm Max. knife opening: approx. 510 mm Main drive: 22 kW Overall dimensions: L 4.2 x W 1.2 x H 1.7 m Total weight: 7.5 tons Manafacture: Lefort Overhauled used machine; Machine ready for use! On hand

Metal powder alloy CASTOLIN ROTOTEC LUBROTEC 19985 medium-hard, highly machinable metal powder alloy Quantity: 1.2 kg Dimensions: 90 x 90 x 130 mm

Alloy Powder CASTOLIN-EUTECTIC EUTALLOY 12494 RC35-40 Packing unit: 3.0 kg New ! Dimensions ( packaging ): 85 x 85 x 230 mm

Universal soldering and welding torch ROTHENBERGER Allgas 2000 with oxygen and propane gas cylinder mobile Dimensions: 440 x 440 x850 mm

All-metal damper, machine foot set, leveling foot set, vibration isolator PAULSTRA V1H752-11 Material (body and bottom): Steel Material (axle): high strength aluminum alloy material (all-metal damping pad) Stainless steel wire Thread: M20 x 2,5 Screw: M20 x 2.5 x 60 mm All metal damper set consists of 4 feet ! used, checked ! Dimensions ( one damper ): 152 x 124 x 60 mm Dimensions ( packaging ): 300 x 250 x 110 mm

High-alloy metal powder cored wire, stainless steel welding wire BÖHLER CN 23/12-MC 57886 Diameter: Ø 1.2 mm Quantity: 16.0 kg Reel: Ø 300 mm New ! Dimension ( single ): 300 x 300 x 100 mm Dimension ( packaging ): 310 x 310 x 105 mm

High-alloy cored wire electrode, stainless steel welding wire BÖHLER EAS 4 PW-FD 36059 Diameter: Ø 1.2 mm Quantity: approx. 14.5 kg Reel: Ø 300 mm New Dimension ( single ): 300 x 300 x 100 mm Dimension ( packaging ): 310 x 310 x 105 mm

Metal powder alloy CASTOLIN ROTOTEC EXOTEC 29904 exothermic reacting metal powder alloy as primer for all ROTOTEC applications Quantity: 1kg New ! Dimensions: 90 x 90 x 130 mm

Recycling machine trade AGICOM-Pedergnana OG: Refurbished used machine, operational, in stock. Knife length: 900 mm Max. knife opening: approx. 510 mm Main drive: 22 kW Overall dimensions: L 4200 x W 1200 x H 1700 mm Total weight: 7.5 tons

Used Carpentry Universal Circular Saw Tailor Type 2406 Top Cutting height: approx. 250 mm Turntable rotatable 180 degrees Swivel 90 degrees- 30 degrees Cutting width adjustment 0-650 mm Clamping cylinder right Roller conveyor left 3000 mm Very good condition Functionally tested Shipping available at an additional cost

• Output max. 80 objects/min • Object diam. max. 100 mm • Label tape width max. 100 mm • Label roll diameter max. 360 mm • Object feeder, drive adjustable • Hot-printing unit Wilux Print Codlux LP-40 (without embossing stick) • Code reading Laetus IPC Commander 110S with code camera COCAM wt880 for all common 1D and 2D barcodes as well as pharma code, software package Laetus Navigator version v2.2, retrofitted in 2016 • Label presence check • Height adjustment dispenser • Massage belt, drive adjustable, height 100 mm • Machine standstill with alarm in case of wrong code or label not present • Drive 230V/50Hz

• Wrap-around labeller for bottles • Operation from left to right • Output max. 7200 objects/h • Object height 25-205 mm • Object diam. 15-65 mm • Label height max. 120 mm • Label length max. 135 mm • Hot printing device Allen Coding • Camera print control by Laetus Wt • Bad bottle discharge • Electr. connection 400V/50Hz

• For vials/bottles diam. 16-78 mm, height max. 220 mm, output max. 350 objects/min • Label length 15 - 200 mm, height 10-100 mm, label roll diam. max. 400 mm • Hot printing device Graseby Allen • Operation from left to right • Dispensing table adjustable in height, depth across direction, inclinaton across direction • Code reading Laetus Argus 6 • Bad discharge in scrap tray by air nozzle • Separating screw for vial diam. 24 mm, height 40 mm • Counter, control for feeding rotary table (rotary table not attached) • PLC Siemens S5-95U • Electr. connection 400V/50Hz

Durma TP123 CNC Punch Machine 30 Ton including tools Machine is like new condition

Equipment Condition - Good Characteristics: - Injection code 180N - Screw pair diameter 40 mm - Execution of the screw M7 - barrier auger - Open nozzle - Vibration mounts - Standard injection speed - Pusher return control In a set: - Lithium industrial mold for the manufacture of parts M2 nozzle for the bioreactor, 4 nests. - Hot channel temperature controller, including connecting cables and 8 zone connectors - Spare socket (die and punch) for the production mold for the manufacture of the part “M2 nozzle for the bioreactor” - Dispenser volumetric LYBRA LV2 - Single phase loader S52 - Water chiller SCA1911 - Crusher model 32-20 / JM - Belt conveyor N-CPR4 additional characteristics in attachments

Brazing brass brazing, with flux, 25 x 5 rods ROTHENBERGER ROLOT 602 3.3.5602 DIN 1733 / 8513 diameter: Ø 2.5 mm rod length: 333 mm Scope of delivery: one box with 25 individual packages, 5 rods per individual package areas of application: Metallic compounds: iron, common steel, copper, nickel and cast steel, non-ferrous metals Other quantities on request ! New ! Dimensions ( individual packaging ): 400 x 55 x 5 mm Dimensions (packaging): 420 x 190 x 65 mm

Brazing brazing brass, 25 x 8 rods ROTHENBERGER ROLOT 603 3.3.5603 DIN 1733 / 8513 diameter: Ø 1.5 mm rod length: 333 mm Scope of delivery: one box with 25 individual packages, 8 bars per individual package areas of application: Metallic compounds: iron, common steel, copper, nickel and cast steel, non-ferrous metals Other quantities on request ! New ! Dimensions ( individual packaging ): 400 x 55 x 5 mm Dimensions (packaging): 420 x 190 x 65 mm

Carpentry Universal Circular Saw used Type: 2003 Cutting height: 200 mm Swivel 45 degrees Turntable rotatable 135 degrees Motor power 7 kW Laser Cut Display Roller conveyor right approx. 2350 mm with stop ruler and stop pawl Functionally tested Shipping available at an additional cost.

Streifeneinleger fuer alle Druckmaschinentypen - Strip feeder for all types of printing machines Mediprint STR 4.1 Year 2002 - Serial-No. 11761 -Online-Video-Inspection by Skype-Video- -We would be very pleased with your visit - more machines on Stock- -Available Immediately - Can be inspect- -On Stock Emskirchen / Nuernberg - Can be test-

Four-sided planer Working height: 740-750 mm Max working width: 305 mm Min working width: 50 mm Max workpiece height on 2 sides: 310 mm Max workpiece height on 4 sides: 160 mm Min workpiece height: 17 mm Feed speed steplessly adjustable: 10-60 m/min motors: bottom 11 kW, top 11 kW, right 7.5 kW, left 11 kW feed motor: 7.5 kW motor height adjustment: 1.5 kW speed 5,500 rpm driven top and bottom feed rollers

All-Fluid Pressure Switch, Electromechanically Actuated, Pressure Switch NORGREN Type 20D 180630000000000000 range: 5 - 63 bar medium: neutral, aggressive, non-flammable gases and fluids switching capacity (AC): max. 250 V 3 A switching capacity ( DC ): max. 125 V 0,05 A pressure connection: G 1/4( inch ) New, with pads ! Dimensions ( pressure switch ): 153 x 140 x 44 mm

Ref. no.: 18326 Hersteller: ARBURG Year of construction: 2011 Clamping unit Clamping force: 50 ton Opening stroke: 300 mm Distance between tie bars: 370 x 370 mm Mould height min.: 200-400 mm Opening width: 500-700 mm Platen size (h x v): 510 x 510 mm Injection unit Screw diameter: 25 mm Injection volume: 59 cm³ Shot weight: 54 g Injection pressure: 2500 bar Measurements and weight Dimensions: 4,2 x 1,5 x 2,1 m Machine weight: 3740 kg Additional information & extras Core pull: 1 pcs Accumulator: 1 pcs Robot Producer: Sepro Type: SR 55 Year: 2020 Weight: 56 kg

Powder Bronze Alloy CASTOLIN ROTOTEC FRIXTEC 19850 highly wear-resistant, workable bronze alloy Quantity: 1.2Kg Dimensions: 90 x 90 x 130 mm

For sale is an all-terrain, used land conveyor with covers. The fully hot-dip galvanized construction is from around 1995-2000 with an active service life of approx. 10 years. With a basic length of approx. 470 m, the belt can be extended in 6-meter increments after the discharge station. The construction offers a belt width of 500mm and a discharge and drive-through height of approx. 5.7m. Special features include an inclined design that follows the terrain with a roadway crossing and a discharge station with railing and walkway. Ideal for use in sand pits and similar operations without a conveyor belt. On-site inspection is possible.

All-terrain crane Poclain PPM 1815 Refurbished 2020 UVV valid until 08/2022 New tyres Cabin heating new Complete electrical system of the crane overhauled or renewed New driving clutch

<br>AGFA APIS-Board Rev. B2. For all AccuSets (800/1000/1500 normal & plus) and all Avantras (20/25/30/36/44-E/S/XT)<br><br><br>br>Verf Gbar: now

<br>AGFA APIS-Board UPAC - for old and new PCs (3, 3V and 5V) - for all AccuSets (800/1000/1500 normal & plus), all Avantras (20/25/30/36/44-E/S/XT) and all Galileos (YAG/VS/Thermo)<br><br><br><br>Verf Gbar: now

Capstan engine for AccuSet - all the details can be seen on the picture. The engine is tested and comes from a working AccuSet. Available on stock

For transport and storage of all types of beverages ex: bier, wine, juice, liquor, whiskey. For yoghurt, mustard, honey, cream for hands, etc. Also for pharma and chemical purpose. Material: Cone: 1.4301 IIID Jacket: 1.4301 IIID All other parts: 1.4301 IIIC Volume: 1000 litre Test pressure:+ 3,4 bar Max. allowable: Operating pressure:+2,0/-0,15 bar Operating temperature:130°C Dimensions: Height over all:1845 mm +/- 10 mm Diameter of container:1000 mm Diameter of reinforcing ring:1012 mm Weight: 126 kg Thickness: Top Bottom:2 mm Lid:3 mm Jacket:1,5 mm Cone:2 mm Outlet Tube:2mm Forklift Tunnel:3 mm Design and Equipment: stacking device - consisting of a stacking crown which is welded directly on the top bottom; Top Bottom: with a DN 400 cover system which is welded in the center of the top bottom; Cover System with a DN 400 lid which ...

Q=25m3/h H=23m and other pump all possible large

Capstan sensors for AccuSet - all the details can be seen on the picture. The sensors are tested and come from a functional AccuSet. Available on stock

cutting knife for AccuSet - all details can be seen on the picture. The cutting knife is tested and comes from a functional AccuSet. Available on stock

motor of the input cartridge for AccuSet - all details can be seen on the picture. The engine is tested and comes from a working AccuSet. Available on stock

Tank Environmental Protection Wozniack . Specialist establishment according to Section 19 of the Water Budget Act (WHG) offers as follows . Diesel tank 10,000 litres double-walled used, with a new diesel pump Vision 60 The container is used, cleaned, overhauled and is equipped with the following fittings: 1 optical leak detector with type approval and leakage liquid (new) 1 filling pipe with TW closure (filling cap) and immerse tube, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII) (new) 1 ladder 1 Diesel pump Vision 60 (new) . Flow rate approx. 50 LTR/min . Hose length 4mtr can be extended. Container dimensions Length 5,310 mm Diameter 1,600 mm Weight approx. 1,500 kg Of course, you can also use your tank system. We are happy to offer you diesel pumps with a hig ...

Tank Environmental Protection Wozniack . Specialist establishment according to Section 19 of the Water Budget Act (WHG) offers as follows . Storage tank / extinguishing water tank 100,000 liters used. The container is used and cleaned from the inside. Length: approx. 15700 mm Diameter: approx. 2900 mm Weight: approx. 16000 kg The container can be fitted with the appropriate fittings for extinguishing water can be equipped according to DIN . Of course, you can also use your tank system. All our tank systems are used in our company by selected employees extensively checked and checked. An inexpensive delivery can be offered with . In addition, we purchase existing tank systems and can professionally as an approved specialist company , clean and transpot. We would be happy to make you an offer . We offer the tank system free of charge from the Warstein ...

Cylinder head F/BFL912/913 Net= 165,- Cylinder head FL812W Net= 345,- Cylinder head FL812D Net= 345,- Cylinder head FL712 Net= 345,- Cylinder head FL612 Net= 395,- (all cylinder heads kpl.with valves ready for replacement available) Piston+female 712/812 Net= 245,- Piston+female 912 Net= 100,- Head screws 912/913 Net= 15,- Head screws BFL913 Net= 15,- Head screws FL712/812 Net= 36,- Head seal kit F/BFL912/913 Net= 9,- Head seal kit FL712-812 Net= 25,- Nozzle insert FL912-913 Net= 30,- Nozzle insert BFL913 Net= 30,- Nozzle insert BFL913- P-nozzle Netto= 45,- all prices subject to change,price changes reserved per piece plus geseinfo@miw-zeven.dtzl.Tax email=

input cartridge for AccuSet - all details can be seen on the picture. The cassette is tested and comes from a working AccuSet. Available on stock

motor in front of the accretorial cassette for AccuSet - all details can be seen on the picture. The engine is tested and comes from a working AccuSet. Available on stock

cassette for AccuSet - all details can be seen on the picture. The cassette is tested and comes from a working AccuSet. Available on stock

MATEC forklift blades are robust and easy to build and can be attached to almost any commercial lyklift. With a fuse bolt, the tilting device can be blocked for special inserts. The front shutter flap can be mounted on any shovel. The interchangeable scraper is suitable for planing work such as removing ice, repelling soil, gravel or feed, etc. - Bucket width 1950 mm - Bucket depth type 1: 1000 mm, shovel depth type 2: 1330 mm - Bucket height without attachment 450 mm - Weight approx. 220 kg - Payload 2000 kg - Steel sheet 4 mm industrial lypainted - Fork shoes axle distance 800 mm - Fork tine width max. 170 mm - Fork thickness max. 60 mm - 4 lifting eyelets for krange slopes - Tilting device for cable pull with lifter and spring reset, securing bolt Options at extra cost: - Type 2 shovel depth 1330 mm Total price € 1590.00 - Front shutter € 590.00 - hydr. Liftin ...

Robust diesel generator with soundproofing on sled. 3-phase generator with harmonized arousal. Technical data: - Rated power 30 KVA - Diesel 495D, 4 cylinder water-cooled, 33.0 kW/45 hp - Consumption average 258 g/kWh - Electric start - Current 43.3 A - Frequency 50 Hz - Voltage 220V/3x400V - Cable outlet 40A with 20 m PUR cable 3PNE, circuit breaker 3phase, Operating hour counter - ATS (Automatic Transfer Switch) with automatic start repetition, Activation of the current cover, automatic shutdown in case of lack of oil pressure, Overheating, excessive speed - slide with 4 lifting eyelets, length approx. 2300mm, width approx. 1300 mm, height approx. 1600 mm, Weight approx. 900 kg Option at extra cost: - Distributor swells with suitable sockets at the end of the cable - Suspension Warranty: 2 years on all non-wear parts or 2000 operating hours, which is m ...

Kat-No 09-1020 Flat bottom tank/storage tank made of V2A 40,000 litres in very good condition! Standard equipment with: • with manhole front DN 400 x 300 mm • with residual drain DN 50 mm (DIN 11851) • with 2 x connections on the manhole DN 50 mm (DIN 11851) • with level indicator DN 10 with shut-off valve • with connection cover for agitator • with filling pipe DN 30 mm • with 2 x transport eyelets •with central threaded connection socket Dimensions and weight: Diameter:2800 mm Diameter Cyl. with filling pipe upwards:3000 mm Total height:6700 mm Weight approx:3 to For inquiries: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 We also have other items (new or used), tanks, pumps, filters, beverage technology and much more - Please request our complete catalogue! All prices are ex works plus law VAT. Intermedia ...

laser unit for ProSet9400 - all details can be seen on the pictures. The lasers come from a functional ProSet. Available on stock