all offers used for sale

cutting knife for AccuSet - all details can be seen on the picture. The cutting knife is tested and comes from a functional AccuSet. Available on stock

motor of the input cartridge for AccuSet - all details can be seen on the picture. The engine is tested and comes from a working AccuSet. Available on stock

Tank Environmental Protection Wozniack . Specialist establishment according to Section 19 of the Water Budget Act (WHG) offers as follows . Diesel tank 10,000 litres double-walled used, with a new diesel pump Vision 60 The container is used, cleaned, overhauled and is equipped with the following fittings: 1 optical leak detector with type approval and leakage liquid (new) 1 filling pipe with TW closure (filling cap) and immerse tube, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII) (new) 1 ladder 1 Diesel pump Vision 60 (new) . Flow rate approx. 50 LTR/min . Hose length 4mtr can be extended. Container dimensions Length 5,310 mm Diameter 1,600 mm Weight approx. 1,500 kg Of course, you can also use your tank system. We are happy to offer you diesel pumps with a hig ...

Tank Environmental Protection Wozniack . Specialist establishment according to Section 19 of the Water Budget Act (WHG) offers as follows . Storage tank / extinguishing water tank 100,000 liters used. The container is used and cleaned from the inside. Length: approx. 15700 mm Diameter: approx. 2900 mm Weight: approx. 16000 kg The container can be fitted with the appropriate fittings for extinguishing water can be equipped according to DIN . Of course, you can also use your tank system. All our tank systems are used in our company by selected employees extensively checked and checked. An inexpensive delivery can be offered with . In addition, we purchase existing tank systems and can professionally as an approved specialist company , clean and transpot. We would be happy to make you an offer . We offer the tank system free of charge from the Warstein ...

Cylinder head F/BFL912/913 Net= 165,- Cylinder head FL812W Net= 345,- Cylinder head FL812D Net= 345,- Cylinder head FL712 Net= 345,- Cylinder head FL612 Net= 395,- (all cylinder heads kpl.with valves ready for replacement available) Piston+female 712/812 Net= 245,- Piston+female 912 Net= 100,- Head screws 912/913 Net= 15,- Head screws BFL913 Net= 15,- Head screws FL712/812 Net= 36,- Head seal kit F/BFL912/913 Net= 9,- Head seal kit FL712-812 Net= 25,- Nozzle insert FL912-913 Net= 30,- Nozzle insert BFL913 Net= 30,- Nozzle insert BFL913- P-nozzle Netto= 45,- all prices subject to change,price changes reserved per piece plus geseinfo@miw-zeven.dtzl.Tax email=

input cartridge for AccuSet - all details can be seen on the picture. The cassette is tested and comes from a working AccuSet. Available on stock

motor in front of the accretorial cassette for AccuSet - all details can be seen on the picture. The engine is tested and comes from a working AccuSet. Available on stock

cassette for AccuSet - all details can be seen on the picture. The cassette is tested and comes from a working AccuSet. Available on stock

MATEC forklift blades are robust and easy to build and can be attached to almost any commercial lyklift. With a fuse bolt, the tilting device can be blocked for special inserts. The front shutter flap can be mounted on any shovel. The interchangeable scraper is suitable for planing work such as removing ice, repelling soil, gravel or feed, etc. - Bucket width 1950 mm - Bucket depth type 1: 1000 mm, shovel depth type 2: 1330 mm - Bucket height without attachment 450 mm - Weight approx. 220 kg - Payload 2000 kg - Steel sheet 4 mm industrial lypainted - Fork shoes axle distance 800 mm - Fork tine width max. 170 mm - Fork thickness max. 60 mm - 4 lifting eyelets for krange slopes - Tilting device for cable pull with lifter and spring reset, securing bolt Options at extra cost: - Type 2 shovel depth 1330 mm Total price € 1590.00 - Front shutter € 590.00 - hydr. Liftin ...

Robust diesel generator with soundproofing on sled. 3-phase generator with harmonized arousal. Technical data: - Rated power 30 KVA - Diesel 495D, 4 cylinder water-cooled, 33.0 kW/45 hp - Consumption average 258 g/kWh - Electric start - Current 43.3 A - Frequency 50 Hz - Voltage 220V/3x400V - Cable outlet 40A with 20 m PUR cable 3PNE, circuit breaker 3phase, Operating hour counter - ATS (Automatic Transfer Switch) with automatic start repetition, Activation of the current cover, automatic shutdown in case of lack of oil pressure, Overheating, excessive speed - slide with 4 lifting eyelets, length approx. 2300mm, width approx. 1300 mm, height approx. 1600 mm, Weight approx. 900 kg Option at extra cost: - Distributor swells with suitable sockets at the end of the cable - Suspension Warranty: 2 years on all non-wear parts or 2000 operating hours, which is m ...

Kat-No 09-1020 Flat bottom tank/storage tank made of V2A 40,000 litres in very good condition! Standard equipment with: • with manhole front DN 400 x 300 mm • with residual drain DN 50 mm (DIN 11851) • with 2 x connections on the manhole DN 50 mm (DIN 11851) • with level indicator DN 10 with shut-off valve • with connection cover for agitator • with filling pipe DN 30 mm • with 2 x transport eyelets •with central threaded connection socket Dimensions and weight: Diameter:2800 mm Diameter Cyl. with filling pipe upwards:3000 mm Total height:6700 mm Weight approx:3 to For inquiries: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 We also have other items (new or used), tanks, pumps, filters, beverage technology and much more - Please request our complete catalogue! All prices are ex works plus law VAT. Intermedia ...

laser unit for ProSet9400 - all details can be seen on the pictures. The lasers come from a functional ProSet. Available on stock

control panel for Avantra25 - all details can be seen on the picture. The panel is tested and comes from a functional Avantra25. Available on stock

cassette for Avantra25 - all the details can be seen on the picture. The cassette is tested and comes from a functional Avantra25. Available on stock

Catalogue-Nr 09-2060 in very good condition! Apex 1600 Pressing Station is a continuous pressing system for the production of fruit juice.The advantages of the APEX Pressing station are universal application for several kind of fruits, we have experience with Apples, Pears, Grape juice, Cherries, Strawberries, Red current Technical Data: Capacity: 14 to/h Length: 6646 mm Width: 4110 mm Height: 5630 mm Weight: 8000 kg Width of belt 1500 mm For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination. Delivery: from 97753 Karlstadt-Karlburg

input cartridge for Avantra25 - all details can be seen on the picture. The cassette is tested and comes from a functional Avantra25. Available on stock

drive motor for Avantra25 - all details can be seen on the picture. The engine is tested and comes from a functional Avantra25. Available on stock

Complete laser and focus module for Avantra25 - all details can be seen on the picture. The unit is tested and comes from a functional Avantra25. Available on stock

Cat-Nr 09-2070 in a very good condition! Apex 1500 Pressing Station is a continuous pressing system for the production of fruit juice.The advantages of the APEX Pressing station are universal application for several kind of fruits, we have experience with Apples, Pears, Grape juice, Cherries, Strawberries, Red currents. Technical Data: Capacity: 14 to/h Length: 6646 mm Width: 4110 mm Height: 5630 mm Weight: 8000 kg Width of belt:1500 mm Speed of belt:0-11 m/min Air pressure min:>4 bar Air pressure max:8 bar More Information and photos upon request! Manual Instructions available! Subject to prior sale. All prices are valid Ex-Works, excl.VAT. The mentioned price is valid inly for 1 Pressing Station 1500. Freight Charges: depending on dimensions and destination. Delivery: from 97753 Karlstadt-Karlburg

Complete ventilation unit for Avantra25 - all details can be seen on the picture. The unit is tested and comes from a functional Avantra25. Available on stock

engine for Avantra25 - all the details can be seen on the picture. The engine is tested and comes from a functional Avantra25. Available on stock

engine for Avantra25 - all the details can be seen on the picture. The engine is tested and comes from a functional Avantra25. Available on stock

Technical data: Clamping opening max.: 850 mm (950 mm) Clamping claw opening max.: 620 mm Output of the main voltage: hydraulic Cutting length: 6000 mm Number of clamping planks: 4 stubble - Incl. new running rails - stiffened in profl steel construction with cross-beams - Single buck adjustment - Cutting staer adjustment, multi-chain drive and ball-bearing connection shaft by electr. Positioning drive. - Automatic lubrication for saemt rails and Guides. - Low wear and high adjustment speed due to central hydraulic clamping claw adjustment with automatic Clamping pressure reduction in case of retracted clamping claws - Trunk can be in the tense state in the Laengaxis to be aligned - Cutting of conical timber or cutting parallel to the Tree edge possible - 3 pairs of regular turners "Quick Turner" - Wheel mount directly connected to clamping buck bottom, thus  ...

Offer about 40 TRANSPORT Grain wagons TYPE Uagps Pictures can be sent immediately. TECHNICAL DATA Gauge 1435 mm Loading gauge UIC Length between buffers 14840 mm Length of the body 13600 mm Height of the wagon from the rail 4053 mm Wheel base of the wagon 9800 mm Tare of wagon 23.3 t Y25 Bogie type - Y25 Bogie wheel base 1800 m Maximum load 56.7 t Load capacity 80 m3 Brake type - KE-2c-AL-SL Maximum speed 100 km/h Number of discharging gates 3 Aperture of discharging gates 800x770 mm Aperture of loading gates 508x10088 mm All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are ap ...

input cartridge for SelectSet 5000 - all details can be seen on the picture. The cassette is tested and comes from a workingSelectSet. Available on stock

Ladies and gentlemen, we may offer you, on the basis of our "General Terms and Conditions of Delivery and Payment for the Trade in Used Machinery and Equipment", subject to change, reserved for intermediate sale, below: 1 piece used gas nipring plant, make: Aichelin Useful: 1000 mm Useful length: 3000 mm 2 pieces of retort (one of which is only 4 years old and little used) 1 piece storage shaft 1 piece washing machine All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator informat ...

Ladies and gentlemen, we may offer you, on the basis of our "General Terms and Conditions of Delivery and Payment for the Trade in Used Machinery and Equipment", subject to change, reserved for intermediate sale, below: Railway railcars Information and pictures on request. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange ...

Type: 100 FSG, Y&l: 1986, granulation plant with circular gas operation, sifter 100 ATP (4 kW Vario, up to 11,500 rpm), and reblow filter K 6 R (2.4 m2 filter area). All in stainless steel. Very good condition.

Spinner for Agfa Avantra 44S ,20,000 RPM, refurbihed 2013, with warranty. We have all Spareparts for Agfa Avantra 25/30/44, AccuSet.. on stock. Don't hasitate to contact us.

Ladies and gentlemen at the moment the following offers are available . EAS-Z Wagons Quantity: about 40 pieces. with or without revision. Prices free location: All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. The entire process of dismantling and loading as well as transport is carried out at the buyer's own  ...

Kat-No 06-1101-1 New TOP quality at an affordable price, best stainless steel according to DIN, Welds minimal, stable feet Standard: Material V2A, 1.4301 according to DIN 17440, inside 3IIId=2B, exterior marbled Completely stained, passivated and neutralized "Remaining outlet DN 50 •Fill level indicator with bar and scale "Swimming lid complete with accessories •Ventilation and vent valve "Air pump Transport hook for lid on/off •Stand feet 3x 620 mm in the end Height Zyl: 1000 mm Total height: 1410 mm Supplements (please ask): Bracket for stairs, tapping tube for tap flap Gr.37 with disc valve NW 40=clear drain, disc valve DN 50, gallows, tap flap Gr.37, tasting valve. For further information: Tel: 09353 909050 or Fax: 09353 9090522 Mobile: 0171 6518248 Delivery: immediately from stock. All prices are ex works plus law VAT.  ...

Metal detector with search coil EQA 65 x 15, No. 6.30.8941.30. Evaluation electronics EMS 21.1 and search coil display metallic foreign bodies in all non-conductive materials. Search width: 650 mm, pass height: 200 mm. Sensitivity is infinitely adjustable. With evaluation electronics in the control box.

Spinner for Agfa Avantra 30 ,30,000 RPM, refrushed 2012, with waranty. We have all Spareparts for Agfa Avantra 25/30/44, AccuSet.. on stock. Don't hasitate to contact us. Available: Yes

Kat-No 06-1101-3 New TOP quality at an affordable price, best stainless steel according to DIN, Welds minimal, stable feet Standard: Material V2A, 1.4301 according to DIN 17440, inside 3IIId=2B, exterior marbled Completely stained, passivated and neutralized "Remaining outlet DN 50 •Fill level indicator with bar and scale "Swimming lid complete with accessories •Ventilation and vent valve "Air pump Transport hook for lid on/off •Stand feet 3x 6: 720 mm Height Zyl: 1250 mm Total height: 1660 mm Supplements (please ask): Bracket for stairs, tapping tube for tap flap Gr.37 with disc valve NW 40=clear drain, disc valve DN 50, gallows, tap flap Gr.37, tasting valve. The price is for a tank. For further information: Tel: 09353 909050 or Fax: 09353 9090522 Mobile: 0171 6518248 Available in other tank sizes: 300,500,600,800,1000,1 ...

Spinner for Agfa Avantra 25,20,000 RPM, refrushed 2011, with waranty. We have all Spareparts for Agfa Avantra 25/30/44, AccuSet.. on stock. Don't hasitate to contact us. Available: Yes

Agfa Aphis Board for new PCI. We have all Spareparts for Agfa Avantra 25/30/44, AccuSet.. on stock. Don't hasitate to contact us. Still in operation: No Available: Yes

We offer all types of screw manufacturing machines M3 - M25 -A href=inchabc://abc.steinfels-kg.de/sale/screws/inch>all information about the machine please click here

Kat-No 09-1017 New Mash tanks made of V2A with agitator and cooling jacket with 4 x feet, very stable version • with manhole front DN 430 x 310 mm • with residual outlet DN 90 mm (DIN 11851) • with threaded connection connector DN 95 mm top floor "with stable agitator with 5 paddles refurbished • with cooling jacket with 2 x cooling zones - OBEN: 750 mm wide - UNTEN: 500 mm wide • with 2 x transport eyelets • with tap flap DN 37 mm Dimensions: Diameter Zyl:1600 mm Total diameter: 1800 x 1800 mm Total height:4000 mm For inquiries: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 We also have other items (new or used), tanks, pumps, filters, beverage technology and much more - Please request our complete catalogue! All prices are ex works plus law VAT. Intermediate sale reserved! Freight cost share: by scope of delive ...

Various machines mostly Wafios or Deiters available! Eg. Wafios UF30 / VDF80 / DF3

We can offer you all types of screw making machinery for M3 - M25

We can offer you all types of Wafios nail machines from S25 - N90

We offer wire looms asking for current offers. abc.steinfels-kg.de

1 office container system approx. 1,500 m2 approximately 55 containers of 20 ft each. Modules Variable room layout 3 floors office building approx. 38 x 20 meters Sanitary facilities, stairwell, connecting passageways, air conditioning Price: on request All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange a ...

Kat-No 10-1750 in very good condition With connection socket at the top With manhole lid front 400x300 mm With tasting tap connection With 2 x threaded connection connector at the front With conical floor with residual outlet DN 65 With 3 transport eyelets With bracket for riser pipe Height-adjustable on 4 calotte feet Dimensions: Total height: 4300 mm Body height: 3160 mm Diameter: 1800 mm For back-up questions: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 We also have other items (new or used), tanks, pumps, filters, beverage and food technology, brewery, distillery and much more - Please request our complete catalogue! All prices are ex works plus law VAT. Intermediate sale reserved! Freight cost share: by scope of delivery Visit also in the evening or on weekends by appointment.

Brands E.W. Menn / Ingramatic / P&E / Hilgeland Diameter ranges from 1 mm - 20 mm

-Sale by owner our used lines meets after reinstallation by us the Definition RETROFIT COMPLETE equipment, incl. Filzmoser straightening system if you are interested, please request an offer Plans, pictures and CAD drawings are available, without mixer, ready for loading, Filigrandecken and double-walled movement, Filzmoser straightening system with robot. ErICH PETER MACHINES-PLANTS GMBH is engaged in complete solutions for the Realization of construction projects according to EU standards. They are not a construction company, but convey the required knowledge in theory and practice to plan, calculate and implement construction projects. Offers include: • Creation of business, master and execution plans • Sale of various machines and equipment for the production of building materials and prefabricated parts • Commissioning of the plants and personnel train ...

Cat. No. 10-1765 in very good condition With manhole round top 400 mm With vent dome DN 300 With CIP cleaning With filling nozzle DN 50 With threaded connection connector DN 50 With level indicator with bar and scale With agitator on the side With conical bottom m.Remaining outlet DN 50 Height-adjustable on 4 calotte feet Dimensions: Total height: 4000 mm Body height: 2450 mm Diameter: 2400 mm with agitator: 2800 mm The price is for a tank. For back-up questions: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 All prices are ex works plus law. Vat Freight cost share: by scope of delivery Delivery: from 97753 Karlstadt-Karlburg Intermediate sale reserved Sightseeing is also possible in the evening or on weekends by appointment.

The best way to own a HPLC mass spec in your lab! fischer analytics - Quattro series tandem mass spectrometer system Waters Quattro Premier XE very sensitive and reliable spectrometer, comparable with AB Sciex 4000 or 5000. CMC nitrogen generator NGM-11 spare filter elememnts Edwards E2M28 foreline pump WATERS 2695 HPLC system WATERS 996 PDA detector unit is sold as tested, meets all specs!

Ladies and gentlemen, we may offer you, on the basis of our "General Terms and Conditions of Delivery and Payment for the Trade in Used Machinery and Equipment", subject to change, reserved for intermediate sale, below: A used railway locomotive about 3,000 hp for sale. Year of construction young Information on request. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept a ...

Offer of a drive-in shelf with about 500 parking spaces. Max load per pallet approx. 800 kg More information against request. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. The material remains the property of the seller until full payment. intermediate sale, other use, Exploitation and error a ...