all offers used for sale

1-deck swashscreen with a screening area of 0.72 m² per deck, drive 1.5 kW via V-belt (engine renewed). Including 1 piece sieve insert (current mesh size approx. 20 mm).

An almost like-new injection moulding machine Arburg is available. Clamping force: 1600kN, tie bar distance: 520mm, clamping stroke: 364mm, ejector stroke: 150mm, ejector force: 40kN, injection unit: 400, injection pressure: 2500bar. Machine dimensions X/Y/Z: approx. 6000mm/1800mm/2200mm, weight: approx. 6000kg, control: Selogica, operating hours: approx. 67h. Includes enclosure with clean air supply FilterFanUnit and removal robot. Documentation available. An on-site inspection is possible.

1-deck swashscreen (expandable to 2 decks) with a screening area of 1.80 m²/deck, drive 4.0 kW via V-belt (engine renewed). Including 1 pc. sieve insert (not strung; stainless steel blank).

clamping force: 1500 kN injection volume: 141 g/PS screw diameter: 35 mm platen size: 470 x 470 mm Condition: used, Specification: horizontal injection moulding machine, Type: Allrounder 470C 1500-400 GE GOLDEN EDITION Injection unit: - Screw diameter: 35 mm (wear-resistant) - Centring ring diameter: 125 mm - Max. shot weight: 141 g (PS) - Injection pressure: 2,500 bar Closing unit: - Clamping force: 1,500 kN - Max. opening stroke: 750 mm - Mould installation height: min. 250 mm - Mould clamping plates: 470 x 470 mm - Approx. operating hours: 79,000 h (still in use) - Operating voltage: 3x 400 V, 50 Hz - Nominal motor heating current: 75 / 40 A - Total current: 115 A - Total connection: 65 kW - Core pulls: 1x - Hot runner control points: 6x - Temperature control unit interfaces: 6x (20 mA) - Approved for high temperatures  ...

1-deck swashscreen in stainless steel design with a screening area of 3.90 m² per deck, drive 5.5 kW via V-belt, equipped with pneumatic deck lifting system and clamping bracket system for easier screen change, incl. 1 piece sieve insert and 1 piece ball knocking device, also in stainless steel design.

1-deck stainless steel round screen with a screening area of 0.7 m² and a screen diameter of 950 mm. Incl. 1 piece sieve insert (Mw: 0.5 mm), incl. stainless steel base. Drive: 2 x 0.5 kW, 400 volts, 980 rpm.

An Arburg injection molding machine with integrated rotary table is available. Connected load: 61kW, clamping force: 500kN, opening force: 40kN, opening stroke: 250mm, max. mold installation height: 270mm, platen distance: 520mm, rotary table diameter: 900mm, rotation angle: 180°, max. table load: 240kg, max. injection pressure: 2500bar. Machine dimensions X/Y/Z: approx. 3250mm/2000mm/2600mm, weight: approx. 3200kg, operating hours: 6244h. Documentation available. An on-site inspection is possible.

General SKU261W362 LocationBarneveld MakeAllgaier TypeTSM 2000/DS/1 No.4002 Year of construction1997 Main Features MaterialStainless steel Surface2.6 m2 Sizes diameter1880 mm Specified Features - Tumbler screener Vibro sievecheck Sieve surface2,6 m² Number of sieve decks:3 Sieve sizesdia. 1880 mm With covercheck Inletdia. 200 mm Outletdia. 200 mm Drive excentercheck Motor4 kW, 400 volt, 1435 rpm Sieve perforation0,315mm-0,160mm-0,150mm With brush cleaningcheck With extra sieve deckscheck 3x 0,4mm Tumbler screening machines MaterialStainless steel 1.4301 (304) Information Mounted on mild steel framecheck Total height2,00 m Weight1080 kg CEcheck Floor space2,00x2,00 m Extra Specificationsonly the brush for the lower screen deck is present in the machine.Tumbler screening machinesAllgaierSieves > Tumbler screening machinesBrand > Allgaier What you can expec ...

General SKU261W365 LocationBarneveld MakeAllgaier TypeTSM 2000/DS/1 No.4005 Year of construction1997 Main Features MaterialStainless steel Surface2.6 m2 Sizes diameter1880 mm Specified Features - Tumbler screener Vibro sievecheck Sieve surface2,6 m² Number of sieve decks:3 Sieve sizesdia. 1880 mm With covercheck Inletdia. 200 mm Outletdia. 200 mm Drive excentercheck Motor4 kW, 400 volt, 1450 rpm Sieve perforation0,710mm-0,400mm-0,150mm With brush cleaningcheck With extra sieve deckscheck 3x 0,600mm-0,400mm-0,315mm Tumbler screening machines MaterialStainless steel 1.4301 (304) Information Mounted on mild steel framecheck Total height2,00 m Weight1080 kg CEcheck Floor space2,00x2,00 m Extra Specificationsthe spacer for the upper brush, is not present.Tumbler screening machinesAllgaierSieves > Tumbler screening machinesBrand > Allgaier What you can expect  ...

General SKU261W359 LocationBarneveld MakeAllgaier TypeTSM 2000/DS/1 No.3998 Year of construction1997 Main Features MaterialStainless steel Surface2.6 m2 Sizes diameter1880 mm Specified Features - Tumbler screener Vibro sievecheck Sieve surface2,6 m² Number of sieve decks:3 Sieve sizesdia. 1880 mm With covercheck Inletdia. 200 mm Outletdia. 200 mm Drive excentercheck Motor4 kW, 400 volt, 1440 rpm Sieve perforation0,710mm-0,600mm-0,600mm With brush cleaningcheck With extra sieve deckscheck 3x 0,315mm-0,160mm-0,150mm Tumbler screening machines MaterialStainless steel 1.4301 (304) Information Mounted on mild steel framecheck Total height2,00 m Weight1080 kg CEcheck Floor space2,00x2,00 mTumbler screening machinesAllgaierSieves > Tumbler screening machinesBrand > Allgaier What you can expect from Foeth: -- Machine is in working condition -- At a reduced price  ...

Injection Molding Machine Specifications 1. Main Machine Parameters Clamping force: 25 t Tool clamping system: 25 / ... Tool plate dimensions: 400 × 400 mm Clearance between columns: 220 × 220 mm Maximum Plate Distance: 425mm Ejector stroke: 95 mm Ejector force: 18 kN Year of manufacture: 2001 Weight: 2000 kg Dimensions (L × W × H): 2.9 × 0.9 × 1.9 m 2. Injection Unit Injection Unit: ... / 60 Screw diameter: 18 mm Injection volume: 20cc Injection weight: 18 g Specific injection pressure: 2500 bar Screw L/D ratio: 24.5 3. Controls Control System: Selogica

Offered are 2 identical horizontally operating hydraulic injection molding machines from ARBURG. Clamping force: 700kN, opening stroke: 250mm, mold installation height: 200-430mm, mold mounting plates X/Y: 476mm/476mm, movable mold half maximum weight: 250kg, screw diameter: 20/25/30mm, injection pressure: 2250/2240/1550bar, horizontal injection position: max. 120mm, weight: 2090kg, machine dimensions X/Y/Z: approx. 3500mm/1900mm/1950mm. Documentation vorhanden, viewing possible by arrangement.

Tumbler screening machine, used Type : ATS 600 / 2 Manufacturer : Allgaier --> Ø 600 mm, 2 screen decks, 3 outlets, with feed hopper.

Dimensions (L/W/H): 3800x2100x2100 mm Weight: 2900 kg Total power requirement: 19 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A compact Arburg injection molding machine is available. Clamping force: 180kN, daylight: 221mm/221mm, platen dimensions X/Y: 400mm/400mm, max. opening stroke: 275mm, min. mold installation height: 150mm, max. platen distance: 425mm, ejector force: 18kN, ejector stroke: 95mm, screw diameter: 15mm, weight: approx. 1900kg, operating hours: approx. 23300h. Documentation available. An on-site inspection is possible.

Qty. 1 Second-hand Complete Aluminium Extrusion Line Mfc.: SMS, Junker, Allen Bradley Force: 2500 MT Built: 1983 Modernised: 2017 Allen Bradley Ethernet Control System & NITROGEN DIE Cooling system Billet dia.: 8” Length: 450 – 950 mm Scope of supply: Log Loading Table Log Furnace Extrusion Press Run-out table Single Cable Puller Cooling Ventilator System Section Stretcher Storage Table Finishing Profile Saw Aging Furnace Die Heating Furnace Automatic Stacker Spare Parts

Technical data, please refer to picture 2

Technical data, please refer to picture 2

All-Fill Series 200 Twin Head Automatic Filling machine Find more here - / Contact us at -

General SKU261W363 LocationBarneveld CEcheck MakeAllgaier TypeTSM 2000/DS/1 Main Features MaterialStainless steel Surface2.6 m2 Sizes diameter1880 mm Specified Features - Tumbler screener Vibro sievecheck Sieve surface2,6 m² Number of sieve decks:3 Sieve sizesdia. 1880 mm With covercheck Inletdia. 200 mm Outletdia. 200mm Drive excentercheck Motor4 kW, 400 volt, 1450 rpm Sieve perforation0,315mm-0,160mm-0,150mm With brush cleaningcheck With extra sieve deckscheck 3x 0,710mm-0,400mm-0,150mm Tumbler screening machines MaterialStainless steel 1.4301 (304) Information No.4006 Year of construction1997 Mounted on mild steel framecheck Floor space2,00x2,00 m Total height2,00 m Weight1080 kgTumbler screening machinesAllgaierSieves > Tumbler screening machinesBrand > Allgaier What you can expect from Foeth: -- Machine is in working condition -- At a reduced price c ...

Stock# U2452 Used stainless steel two decks tumbling screen by Allgaier-Werke Gmbh & Co KG (Germany) model TSM 950/3. Body and contact parts made of stainless steel. Machine has 2 decks with diameter 950mm and has cleaning rubber balls on 2 deck. Central top inlet and 3 side outlets. Machine is driven by ele. motor with power 1.5 kW, 1430 rpm 220/380 volts, 50 Hz. Screen is mounted on carbon steel based. The set with machine includes a third deck with balls without a screen.

For sale: Band-All BA32-102 Banding Tool, The Band-All BA32-102 is a high-quality, durable banding tool designed for heavy-duty applications. It efficiently secures bundles with precision, offering ease of use and long-lasting performance. Perfect for industrial and commercial use, this tool ensures a tight and secure band every time. In excellent condition and ready for immediate use., Contact for more details or to arrange a viewing!, For sale: Band-All BA32-102 Banding Tool

hello for sale 2 units turbine in trailer Technical Specifications Model: Rolls-Royce Allison 570KA Year of manufacture: 2005 Fully overhauled: 2012 Commissioned: 2016 Operating hours since 2016: Only 81 hours Fuel type: Gas Power output: 4,400 kW Mounted on trailer: Yes Additional trailer: UPS trailer included Location: Paris, France loaded now Availability: Immediate Documentation: Complete (technical & maintenance records)

Semi-automatic gravimetric dosing of powders ranging from free-flowing to very poorly flowing (e.g. clumping, moist, or bridging) as well as fibers, flakes, and other bulk materials. Fill weight: max. 50 kg depending on the dosing screw. Filler comes with a lot of accessories such as vacuum conveyor PIAB, various dosing screws, etc. PLC: Siemens SIMATIC S7-200.

General SKU423W1341 MakeAllgaier LocationBarneveld CEcheck TypeVTS 1200/2 Main Features MaterialStainless steel Surface1.1 m2 Sizes diameter1200 mm Specified Features - Vibro sieve Vibro sievecheck Sieve surface1,1m² Number of sieve decks:2 Sieve sizesDia. 1200 mm With covercheck InletDia. 300 mm OutletDia. 350 mm, dia. 150/200 mm Drive excentercheck Motorcheck( type plate missing) With extra sieve deckscheck MaterialStainless steel 1.4552 Information No.406 Year of construction1993 Mounted on mild steel framecheck Floor space1,60x1,60 m Total height1,40 m Extra Specificationsinfo regarding extra sieves: in total 18x extra sieve decks. sizes 2.38mm-1.12mm-1.0mm-0.9mm-0.71mm-0.60mm Vibro sievesAllgaierSieves > Vibro sievesBrand > Allgaier What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for ship ...

A comprehensive spare parts package for the Arburg Allrounder 221 series is available. 1) Mechanics/Hydraulics/Plasticizing: 6x ejector piston rod, 3x pressure relief valves, clamping cylinder seal kit, 5x ejector seal kit, injection unit seal kit, cylinder D30, screw D30, 20x disc spring D31,5/16,3. 2) Heating/Temperature: 6x barrel heaters 1750W, 5x nozzle heater band 600W, Thermomat, 40x thermocouples. 3) Electrical/Sensors/Switches: 2x coding switch blocks, 6x contact sensors, 5x rocker switches, 2x snap-action switches, 9x switches, 8x microswitches, 2x limit switches, 10x ejector safety switches, 4x initiators, oil level switch, 6x contact pins with contact, 2x pulse counters. 4) Electronics/Control: printed circuit board ARB 279, 2x each membrane keypad ARB 179 and 180, printed circuit board shutdown automation 141, 2x printed circuit board ARB 550, printed circuit board ARB 554.  ...

Two ALUP compressors including two heat exchangers are available. Operating pressure: 7bar, max. pressure: 13bar, max. inlet temperature: 55°C, power range: 11kW-30kW, refrigerant: R513A, refrigerant quantity: 500g, weight: approx. 290kg. Documentation available. An on site inspection is possible.

Features Volume 60200 L Material V2A (AISI 304) 1.4301 Vertical design Last Use Food Number of feet 4 Total height 7700 mm Height 5330 mm Diameter width 3500 mm Weight 3500 kg Surface inside 2B=IIIC ground Surface on the outside semi-marbled Description Topsoil: Clapper bottom 2 crane eyes Threaded welding nozzle DN 100 to DN 40 Sprinkler ring Vent nozzle DN 50 (airlock) Tank cylinder: Level indicator with bar, scale and standpipe valve DN 15 Manhole 350x450 mm Sample tap DN 15 Ladder hook at the top Dip Shank Sleeve DN 15 for Temperature Display Downward-swept CIP cable with vent cable DN 40, with connection thread DN 50 according to DIN 11851 Clear drain with angled seat valve DN 50 Cooling line CIP Ball Underbody: Clapper bottom Forward-drawn curved surround with angled seat valve DN 50 - outlet pipe DN 100 reduced to DN 50 with flange  ...

An Arburg injection molding machine with a rotary unit on the moving mold half is available. Column spacing: 420mm, clamping force: 1000kN, opening force: 250kN, opening stroke: 500mm, min. mold installation height: 250mm, platen dimensions X/Y: 570mm/570mm, max. mold weight: 600kg, ejector stroke: 175mm. Injection unit 350, screw diameter: 35mm/40mm/45mm, max. shot volume: 230cm³, max. injection pressure: 2500bar. Machine dimensions X/Y/Z: approx. 4300mm/1700mm/2750mm, weight: approx. 4500kg, operating hours: approx. 75443h. Documentation available. On-site inspection is possible.

A vertical injection molding machine Arburg with a horizontal injection unit is available. Clamping force: 800kN, opening stroke: 500mm, min. mold installation height: 250mm, platen spacing: 750mm, tie bar spacing X/Y: 420mm/420mm, platen dimensions X/Y: 570mm/570mm, max. mold weight: 600kg, ejector stroke: 175mm. Machine dimensions X/Y/Z: approx. 4350mm/1700mm/2100mm, weight: approx. 3500kg. Documentation available. On site inspection is possible.

A vertical injection molding machine Arburg with a horizontal injection unit is available. Clamping force: 1300kN, opening stroke: 500mm, min. mold installation height: 250mm, mounting plate distance: 750mm, tie bar spacing X/Y: 420mm/420mm, platen dimensions X/Y: 605mm/605mm, max. mold weight: 650kg, ejector stroke: 175mm. Machine dimensions X/Y/Z: approx. 4350mm/1650mm/2100mm, weight: approx. 4300kg, operating hours: approx. 80131h. Documentation available. On-site inspection is possible.

A vertical injection molding machine Arburg with a horizontal injection unit is available. Clamping force: 800kN, opening stroke: 500mm, min. mold installation height: 250mm, platen distance: 750mm, platen dimensions X/Y: 570mm/570mm, max. mold weight: 600kg. Machine dimensions X/Y/Z: approx. 4300mm/1700mm/2100mm, weight: approx. 3500kg, operating hours: 44117h. Documentation available. On-site inspection is possible.

General SKU326X670 MakeAllgaier TypeVTS-600/2 No.268 Year of construction1986 LocationBarneveld Main Features MaterialStainless steel Surface1.13 m2 Sizes diameter600 mm Specified Features - Vibro sieve MaterialMild steel, Stainless steel 1.4552 Vibro sievecheck Sieve surface1,13 m2 Number of sieve decks:1 Sieve sizesDia. 600 mm With covercheck InletDia. 160 mm OutletDia. 90 mm Drive vibro motorcheck Motor0,3 kW, 415 volt, 1460 rpm Sieve perforation0,1 mm With ball cleaningcheck With extra sieve decks0,3 mm Information Mounted on mild steel framecheck With switchcheck Floor space0,95x0,95 m Total height1,0 m CEcheckVibro sievesAllgaierSieves > Vibro sievesBrand > Allgaier What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect th ...

This Arburg Allrounder 630S 2500-675 was manufactured in 2003. It is a hydraulic injection moulding machine featuring a screw diameter of 45mm. Consider the opportunity to buy this Arburg Allrounder 630S 2500-675 hydraulic injection moulding machine. Contact us for more information.

General SKU277U494 MakeAllgaier TypeTSM 950/1 No.155 Year of construction1982 LocationBarneveld Main Features MaterialStainless steel Surface0.71 m2 Sizes diameter950 mm Specified Features - Tumbler screener Sieve surface0.71 m² Number of sieve decks:1 Sieve sizesDia: 950mm With covercheck Inlet195 mm Outlet95 mm Motor0,75 kW, 220/380 volt, 2800 rpm Sieve perforation2mm With ball cleaningcheck Tumbler screening machines MaterialStainless steel 1.4306 (304L) Information Mounted on mild steel framecheck Floor space1,4x1,4 m Total height1,2 m Weight400kgTumbler screening machinesAllgaierSieves > Tumbler screening machinesBrand > Allgaier What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. ...

General SKU261W1591 MakeAllgaier LocationBarneveld CEcheck TypeTSM 2000/DS/1 Main Features MaterialStainless steel Surface2.6 m2 Sizes diameter1880 mm Specified Features - Tumbler screener MaterialStainless steel 1.4301 (304) Tumbler screening machines Vibro sievecheck Sieve surface2,6 m² Number of sieve decks:3 Sieve sizesdia. 1880 mm With covercheck Inletdia. 200 mm Outletdia. 200 mm Drive excentercheck Motor4 kW, 400 volt, 1450 rpm Sieve perforation3x 0,600mm-0,600mm-0,710mm With brush cleaningcheck With extra sieve deckscheck 3x 0,315mm-0,600mm-0,600mm Information No.4003 Year of construction1997 Mounted on mild steel framecheck Floor space2,00x2,00 m Total height2,00 m Weight1080 kgTumbler screening machinesAllgaierSieves > Tumbler screening machinesBrand > Allgaier What you can expect from Foeth: -- Machine is in working condition -- At a reduced pr ...

This Arburg ALLROUNDER 1200 t 1000 - 400 Injection moulding machine was manufactured in the year 2018 in Germany. It has 58 production hours. The machine has a clamping force of 1000 kN, machine like new, used only for testing. Machine needs to be CE certified by the customer, we have a quote from a third party starting at 2.000€.

General SKU326X669 LocationBarneveld MakeAllgaier TypeD-950/2 Main Features MaterialStainless steel Surface0.7 m2 Sizes diameter950 mm Specified Features - Vibro sieve Vibro sievecheck Sieve surface0.7 m2 Number of sieve decks:500 µm Sieve sizesDia. 950 mm With covercheck InletDia. 310 mm OutletDia. 200 mm Drive vibro motorcheck Motor2x 0,5 kW, 220/380 volt, 980 rpm With ball cleaningcheck With extra sieve decks1000 µm MaterialStainless steel 1.4305 (303) Information No.555 Year of construction1989 Without framecheck Floor space1,4 x 1,4 m Total height1,0 m Weight350 kgVibro sievesAllgaierSieves > Vibro sievesBrand > Allgaier What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please ...

This hydraulic injection moulding machine was manufactured in 2004. It features a screw diameter of 60mm and can handle a maximum injection weight of 723g. The machine supports a clamping force of 3200kn with a maximum opening stroke of 700mm. It is equipped with special features like 2xAS core pull and 6xDS hot runner control points. Ideal for robust performance in a production setting, the Arburg Allrounder Selecta 720 S 3200-2100 machine we have for sale. Contact us for more information.

This 3-axis Arburg Allrounder 520S 1600-400 was manufactured in 2021. It features a screw diameter range of 35-45 mm and a clamping force up to 2000 kN. The machine includes a removal robot and an enclosure with a FilterFanUnit, ensuring clean operations. Ideal for precision plastic processing, it offers a mold clamping height of 250 mm and platen spacing of 825 mm. Contact us for more information about this machine.

General SKU326X671 LocationBarneveld MakeAllgaier TypeD-950/2 Main Features MaterialStainless steel Surface0.7 m2 Sizes diameter950 mm Specified Features - Vibro sieve Vibro sievecheck Sieve surface1,4 m2 (2 x 0,7 m2) Number of sieve decks:2 (3000 µm and 560 µm) Sieve sizesDia. 950 mm With covercheck InletDia. 210 mm OutletDia. 200 mm Drive vibro motorcheck Motor2x 0,5 kW, 220/380 volt, 980 rpm Sieve perforation0,4 mm With ball cleaningcheck With extra sieve decks4 (1000 µm, 560 µm and 315µm) and extra ball deck MaterialStainless steel 1.4305 (303) Information No.573 Year of construction1990 Without framecheck Floor space1,4 x 1,4 m Total height1,0 m Weight350 kgVibro sievesAllgaierSieves > Vibro sievesBrand > Allgaier What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any de ...

This Arburg Allrounder 920H 5000-4600 was manufactured in 2020. A robust plastic processing machine featuring a clamping force of 5000 kN and an injection unit of 4600. It has a significant opening stroke of 900 mm and mold platens size of 1280 x 1280 mm. Consider the opportunity to buy this Arburg Allrounder 920H 5000-4600 plastic processing machine. Contact us for more information about this machine.

Key data: 5 , 10

Oil lubricated screw compressor Cooling: Air-cooled design Drive: Efficient IE3 motor, belt drive Control: Speed-controlled with frequency converter Control: Infologic² Connect Refrigeration Dryer: Integrated Filtration optionally available Performance data Volume flow at operating pressure 7.0 bar 0.33 - 0.75 m³/min Operating pressure min. / max. 4.0 / 10.0 bar Total power consumption at 9.5 bar / full load 7.7 kW Rated power motor; IP55 5.5 kW Oil volume 3.2 lt Pressure dew point refrigeration dryer approx. +3 °C Installation data Ambient conditions min. / max. 1 / 46 °C Cooling air demand 1140 m³/h Free fan pressure 30 Pa Sound level 61 dB(A) Voltage / PH / Frequency 400 / 3 / 50 V / Ph / Hz Refrigeration dryer power (230V/50Hz) 0.19 kW Dimensions and weight Length x width x height 1540 x 600 x 1375 mm Weight 230 kg Compressed air outlet 1/2 "  ...

This Arburg Allrounder 1200T 800-150 was manufactured in 2006. A vertical injection moulding machine, it offers robust functionality for specialized plastic processing tasks. Consider the opportunity to buy this Arburg Allrounder 1200T 800-150 vertical injection moulding machine. Contact us for more information.

Key data: 7 , 10 , 1

Oil lubricated screw compressor Cooling: Air-cooled design Drive: High-frequency motor with 1:1 direct drive Control: Speed-controlled with frequency converter Control: Aircontrol 5.0 (4-20mA) Refrigeration dryer: Integrated, refrigerant R134a Filtration: incl. cyclone separator Performance data Volume flow at operating pressure 7.0 bar 0.28-1.25 m³/min Operating pressure min. / max. 5.0 / 12.5 bar Total power consumption at 10.0 bar / full load 9.3 kW Rated power motor; IP55 7.5 kW Oil quantity 3.5 lt Pressure dew point refrigerant dryer (20°C 100% RH) +3 °C Installation data Ambient conditions min. / max. 1 / 46 °C ∆ T above coolant temperature 8 °C Cooling air requirement 2200 m³/h Free fan pressure 30 Pa Sound level 62 dB(A) Voltage / Frequency 400 / 50 V / Hz Refrigeration dryer power (230V/50Hz) 0.27 kW Dimensions and weight Length x width ...

Clamping force: 1300kN, screw diameter: 40mm, max. injection pressure: 2120bar, shot volume: 182m³, shot weight: 153g, tie bar spacing: 470mm/470mm, platen dimensions X/Y: 650mm/650mm, min. mold installation height: 275mm, max. opening stroke: 850mm, centering: 125mm. Machine dimensions X/Y/Z: approx. 4600mm/1600mm/2200mm, weight: approx. 5500kg. The clamping unit shows an oil leakage at the clamping cylinder. Documentation available. An on site inspection is possible.

Series B, 132kW, 232A. S/N 12082007

3 Allison Turbine Detroit Diesel Allison Type 501 KB Year of manufacture 1980 alternator RATED 3860KW alternator DUTY 3355KW Alison turbine = 4380 HP --> domestic fuel oil INPUT RPM 14210 OUTPUT RPM 1500 Number of hours 600H of operation 10 KV cell (alternator output) Deutz 160 HP diesel (turbine launcher) 10 kW generator set – Deutz engine (Auxiliary power)

Series A, 22C-D038A103, 18,5kW, 40A

Type 501 KB Year of manufacture 1980 alternator RATED 3860KW alternator DUTY 3355KW Alison turbine = 4380 HP --> domestic fuel oil INPUT RPM 14210 OUTPUT RPM 1500 Number of hours 600H of operation 10 KV cell (alternator output) Deutz 160 HP diesel (turbine launcher) 10 kW generator set – Deutz engine (Auxiliary power)