all offers used for sale

Oil lubricated screw compressor Cooling: Air-cooled design Drive: High-frequency motor with 1:1 direct drive Control: Speed-controlled with frequency converter Control: Aircontrol 5.0 (4-20mA) Refrigeration dryer: Integrated, refrigerant R134a Filtration: incl. cyclone separator Performance data Volume flow at operating pressure 7.0 bar 0.27-1.86 m³/min Volume flow at operating pressure 10.0 bar 0.37-1.50 m³/min Operating pressure min. / max. 5.0 / 12.5 bar Total power consumption at 10.0 bar / full load 13.3 kW Rated power motor; IP55 11.0 kW Oil volume 4.7 lt Pressure dew point refrigerant dryer ( 20°C 100% RH) +3 °C Installation data Ambient conditions min. / max. 1 / 46 °C ∆ T above cooling medium temperature 4 °C Cooling air requirement 2200 m³/h Free fan pressure 30 Pa Sound level 63 dB(A) Voltage / Frequency 400 / 50 V / Hz Refrigeration dr ...

Screen

10 MW W H-ALLEN Bedford England Back Pressure Steam Turbine Manufacturer: W H-ALLEN, Bedford, England Type: Back Pressure Steam Turbine Condition: Used – In Good Industrial Condition Availability: In Stock Technical Specifications: Rated Power Output: 10 MW Rated Speed: 7,750 RPM Voltage: 11 kV Frequency: 50 Hz Steam Conditions: Inlet Steam Pressure: 44.8 bar g Inlet Steam Temperature: 400 °C Exhaust Steam Pressure: 1 to 5.2 bar g Heavy-duty British-manufactured back pressure steam turbine designed for continuous industrial power generation and process steam applications. This unit is suitable for combined heat and power systems in sugar mills, textile plants, paper mills, chemical industries, and other steam-based manufacturing facilities. The turbine operates at high efficiency with stable back pressure performance, making it ideal for facili ...

1 ALLIANCE sample high temperature jet dyeing machine, type Baby Jet, capacity 4 to 10 kg (according to the weight and composition of the fabrics), year 1996, maximum dyeing temperature 140 ºC, machine equipped with filter, TCA 200 dye cycle controller, winch is inverter controlled (OMRON), with addition vat, Machine delivered fully erected ready to connect to media (no cables and no pneumatic pipes a disconnected for the transport

Equipment Manufacturer Power Speed Generator BRUSH 3125 kVA 1500 rpm Gearbox Allen Gears 3860 kW 1500 rpm 1Generator Manufacturer: BRUSH Electrical Machines Limited Main SpecificationsParameter Value Parameter Value Type AC Generator Rated Output 3125 kVA Speed 1500 RPM Voltage 10,000 V Current 180 A Frequency 50 Hz Phase 3 Phase Brushless Excitement 2. Gearbox Manufacturer: Allen Gears Limited Location: Pershore, England Type Epicyclic / Planetary Gearbox Technical Specifications Parameter Value Model APG 23 Serial No. X5/40848 Year 1980 Type Planetary Gear Gear Ratio 9.473 Performance Parameter Value Rated Power 3860 kW Duty Power 3355 kW input Speed 14,210 RPM Output Speed 1500 RPM CT INDUSTRY 2 Rue laennec Rosny sous bois 93110 GSM 06 03 86 59 55

Fiber optic cables, fiber optic cables, data cables, LAN cables, fiber optic cables, coax cables, antenna cables -Manufacturer: all-cable, coaxial cable 50 Ohm -Type: RG 58 C/U MIL-C 17 F-ROHS -Application area: indoor -Length: 352 m -Price: complete -Dimensions roll: Ø 400 x 420 mm -Weight: 16 kg

max. workpiece length: 5150 mm profile spindle: 1 Stück main drive: 16 kW Control: Beckhoff CNC Number of axles: 5 St. CNC machining center Masterwood Project 385 WL, NEUMASCHINE The all-rounder for Windows, round arches and doors interior Post and beam 5-axis machining of all kinds Detailed description in the adjacent PDF file! HIGHLIGHTS: - Working range: X = 5150 mm, Y = 1500 mm, Z = 200 mm - 1 pc. 5-axis high-performance spindle, 16 kW, double bearing with HSK 63 F recording - fixed drill head with 19 spindles with 7 individually retrievable vertical spindles X-direction with 6 individually retrievable vertical spindles Y-direction with 2 double horizontal spindles X-direction and 1 double horizontal boring spindle in the Y direction Saw unit integrated in drill head - Carousel tool changer with 22 places and 102 mm grid spacing - Carousel tool changer with 16 places and 102 mm grid ...

Safety switch, safety switch, safe lock -Safety switch series Ferrogard -Supply voltage: 250 VAC -Switching distance: 23 mm -Protection class: IP 67 -Number: 4x available -Price: per piece -Dimensions: 180/105/H95 mm -Weight: 0.5 kg

Multifunctional punch, punch press, hole punch, pneumatic hole punch -pneumatically operated -Year of manufacture: 1998

wire electrode, welding wire, welding wire -Net weight: 5 kg -Number: 1x packages available -Price: per package -Weight complete: 5.9 kg/package

Multifunctional punch, punch, hole punch, pneumatic hole punch -operated: pneumatic -Year of construction: 1998 -Type: 270164-1

Network, communication, LAN/modems -Type: AT-GS900/16 -Connections: 16 pieces -Weight: 2.5 kg

Pressure vessel, pressure tank, pressure vessel, -Manufacturer: UM Alloy Products, stainless steel compressed air tank -Type: 316L MAWP 9 BAR -Contents: approx. 5 liters -Permissible operating overpressure: 9 bar -Dimensions: Ø 240 x 300 mm -Weight: 5.3 kg

Safety switches, rope pull switches, rope tensioners, tensioning devices, rope tensioner system components -Manufacturer: Allen Bradley, Guardmaster Lifeline Rope Tensioner Rope Pull Switch -Type: LRTS -Quantity: 1x cable tensioner available -Dimensions: 90/90/H45 mm -Weight: 0.3 kg

clamping force: 700 kN injection volume: 103 cm³ screw diameter: 30 mm platen size: 432 x 310 mm closing stroke: 650 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Reflective light barrier, light barrier -10-40 V DC Price: per piece -Quantity: 5 available -Weight: 0.3 kg

Pump, centrifugal pump, high-pressure pump, water pump, multi-stage vertical centrifugal pump -Flow rate: 19.4 l/min -Delivery head: 7 bar -Speed: 1400 rpm -Motor power: 0.55 kW -Dimensions: 600/260/H260 mm -Weight: 36 kg

Switches, pushbuttons -Type: 800MR PA16 -Max.: 300 VAC Price: per piece -Number: 23x Available -Weight: 0.15 kg

Punching tools for window construction -various types: AM 06 93 -993333/993352-1/993335/993334/94-234907 -Sale: only complete set -Total weight: 50 kg

ALLCOMP UNICUT CC 5018 automatic cutting machine was built in 2015 in Poland by ALLCOMP POLSKA Sp. z o.o. The machine designed for the manufacture of clothing and all types of sewing products enables the cutting of single and multi-layered materials. It is distinguished by the use of state-of-the-art technology, which enables full automation of the cutting process while reducing material losses. The cutting process is performed by means of a robust oscillating knife, which is automatically sharpened during operation. This solution minimises the number of undercuts and ensures high repeatability of the cut regardless of the type of material being cut. Thanks to the high oscillation speed of the knife at 6000 cycles per minute, all operations are performed rapidly with the highest cutting quality. The UNICUT CC50 automatic cutting machine is controlled by dedicated software, which al ...

Industrial vacuum cleaners, vacuum cleaners, dust extractors, industrial vacuums, floor vacuums, safety industrial vacuums -Manufacturer: Allaway, industrial vacuum cleaner, central vacuum cleaner without motor -Type: Manta APC 3 -Dimensions: 600/550/H1970 mm -Weight: 86 kg

; Power [PS]: 27; Gross weight [kg]: 1350; Engine: Yunnei / DEF20CFA4; Accessories: Tanker, Battery, Control Panel, Input: 1P Socket - Busbar , Output: 1P Main load socket - AC socket: 1P, 2x32A, 2x16A - Busbar - 1P Socket; Water Tank Volume [l]: 100

; Power [PS]: 41; Gross weight [kg]: 2800; Engine: Yunnei / DEF20CFA4; Accessories: Tanker, Battery, Control Panel, Input: 3P Socket - Busbar, Output: 1P Main load socket - Busbar - AC socket: 1P, 2x16A, 1x32A; 3P, 1x63A 1P Socket; Water Tank Volume [l]: 100

pump Liquid pump Manufacturer: Allweiler pump Type: EMTEC, A20R38D8-6 Flow rate: 21.1 l/min Rotational speed: 2900 rpm Pressure capacity 30 bar Rated power: 1.9 kW With Siemens drive motor For further data please see also the type plate photos. All information without guarantee

clamping force: 500 kN injection volume: -- cm³ screw diameter: 25 mm platen size: 400 x 400 mm Condition: used, Specification: horizontal injection molding machine, - used injection unit: - Screw diameter: 25 mm - shot volume max.: -- cm³ - injection pressure approx.: 1290 bar - heating zones: 4 - Heating power: 4 kW clamping unit: - clamping force: 500 kN - opening stroke max.: 325 mm - platen distance max.: 550 mm - clamping platen size approx.: 400 x 400 mm - tie bar distance: 270 x 270 mm - pump motor: 15 kW - total power: 19 kW - operating voltage: 380V, 50Hz - Weight approx.: 1.870 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

; Power [PS]: 61; Gross weight [kg]: 2800; Engine: Yunnei / DEF30CAA5; Accessories: Tanker, Battery, Control Panel, Input: 3P Socket - Busbar, Output: 1P Main load socket - Busbar - AC socket: 1P, 1x16A, 1x32A; 3P, 1x63A - 1P Socket; Water Tank Volume [l]: 150

; Power [PS]: 109; Gross weight [kg]: 2500; Engine: Yunnei - DEF47CZAA5; Accessories: Tanker, Battery, Control Panel, Input: 3P Socket - Busbar, Output: 1P Main load socket - Busbar - AC Socket: 1P, 2x16A, 1x31A: 3P, 1x63A, 1x125A - 1P Socket; Water Tank Volume [l]: 150

Allscales platform scales Model: ISC-V stainless platform scale, platform 500mm x 500mm, 400g - 60Kgs, e = 20g, 1Ph

Spiral housing Centrifugal pump Manufacturer: Allweiler Type: NT40-160 Diameter: 136mm 30m³/h H: 30m 3500 rpm Electric motor: Manufacturer: Siemens Type: 1LAZ1302AA90-Z 6.3kw NEW, from warehouse resolution for more information see pictures.

ARBURG 270 S 150-60 U ALLROUNDER MACHINE WAS FULLY SERVICED NOT LONG AGO WITH NEW SCREW TECNICAL DATA IN LIST -PHOTO EUROMAP 150-60

Pendulum jaw for 125mm width and 160mm width Extremely flexible. Strong execution.

used shredder Manufacturer: BOA Type: ALLIGATOR 550 - 100 Year of construction 2017 Specifications: Drive power: 55 kW Throughput: - 1,5 t/h for fine adjustment, and - up to 6.0 t/h with coarse setting Filler opening: 1,120 Rotor speed: 1,500 rpm Operating voltage: 400 V/50 Hz Insulation class: IP 55 Weight: approx. 5,200 kg

Asphalt paver Fortress Allat 450P. maximum width 3m. Two conveyors.

Brand Allibert Year of manufacture: Used Dimensions LxWxH (mm) Outside: 400 x 300 x 350 (320) / Inside: 350 x 250 x 310 Weight (Kg) ca 1,70 each Number of pieces in stock 1232 Made in Belgium Comments PP PVC box incl. covers ( small amount little damages)

Allweiler feed pump type SNF 280 ER46U4-W33 in new condition for sale. Technical data can be found in the attached data sheet.

Arburg April 2014 model 920H 5000-4600 500 ton Can be inspected and seen in production

Rundwirker, Fabr. Benier, Type Allround

Stock# U2412-3 Unused progressing cavity pump by Allweiler type AEB 1E 200. Pump is driven via Nord gearbox and el motor 2.2 kW, 1445 rpm, 230/400 V, 50 hz. Pump works with rotation up to 150 rpm. Working output depends on product and rotation and can reach from 5 l/min, up to 500 l/min. At current rotation on gearbox pump can reach 60 l/min / 3600 l/h. Mounted on carbon steel base.

Bread slicer, Fabr. Herlitzius

Bread slicer, Fabr. Herlitzius

Nv. Num. : 7150 Type: ALLROUNDER 275 V 250 Producer: ARBURG Generated: Parameters: Clamping force: 250 kN Height of clamping plate: 150-250 mm Ejector stroke length: 225 mm Opening the mold: 375-475 mm

clamping force: 600 kN injection volume: 144 cm³ screw diameter: 35 mm platen size: 570 x 570 mm closing stroke: 500 mm Condition: used Specification: Horizontal injection moulding machine clamping unit: - Clamping force max.: 600 kN - clamping platens: 570 x 570 mm - clear column distance: 370 x 370 mm - Distance between the mould mounting platens: 750 mm - Mould installation height: 250 mm - Opening stroke max.: 500 mm - Ejector travel hyd. Ejector stroke: 175 mm - Ejector force max.: 40 kN Injection unit: - Screw diameter: 35 mm - Screw length: 20D - Screw stroke max.: 150 mm - Max. dosing volume: 144 cm³ - Moulded part weight: 121 g - Injection pressure: 1,820 bar - Injection flow max.: 154 cm³/s - Screw peripheral speed: 57 m/min - Screw torque max.: 440 Nm - Barrel and nozzle heating: 1600 +  ...

Allgaier Screening Machine | Vibrating screen type ARSM 33-10 Refurbished (workshop overhauled) - Make: Allgaier - Type: ARSM 33-10 - Year of construction: 2005 - Condition: refurbished - Screening capacity: up to approx. 200 - 220 srm/h (for wood chips and sawdust) - Screen area: 10.0 m² x 2 = 20 m² per screen mesh size - Fractions: 3 - Screen decks: 4 pieces + 1 piece intermediate floor - Drive power: 7.5 kW - L x W x H: 7,000 x 3,540 x 2,700 mm - Machine weight: approx. 8,000 kg - Machine colour: RAL 6011 Reseda green - Screen inserts freely selectable - Design of the spouts according to customer requirements Screening machine overhauled. Spherical roller bearings and struts are new. Suitable, among other things, for screening the following bulk materials: -Wood chips - Sawdust and sawdust -Biomass -Wood pellets -Charcoal - Reclaimed wood -Bark Vibr ...

clamping force: 1300 kN injection volume: -- cm³ screw diameter: 45 mm platen size: 470 x 470 mm Condition: used, Specification: Horizontal injection moulding machine, Type: Allrounder 470 S 1300-350 Injection unit: - Screw diameter: 45 mm - Centring ring diameter: 125 mm - Shot weight max.: 210 g (PS) - Injection pressure: 1,840 bar Clamping unit: - Clamping force: 1300 kN - Opening stroke max.: 850 mm - Mould installation height: min. 275 mm - Mould mounting platens: 470 x 470 mm - Operating hours approx.: 91,000 - Core pulls: 1x - Valve gate: 1x pneumatic - Hot runner control points: 12x - Temperature control unit interfaces: 6x (20 mA) - Conveyor belt in the machine - Selector unit. available - Release for high temperature up to 450°C - Communication card for ProSeS interface available - Robot interface available. Technical pr ...

Used machine in good condition. Available for immediate delivery. - Screw diameter: 50 mm - Clamping force: 1.600 kN - Shot weight max: 297 g - Injection pressure: 2.080 bar - Injection volume: 353 cm? - Screw L/D ratio: 20 - Ejector stroke / force max.: 225 / 66 mm / kN - Mould opening stroke max: 650 mm - Mould height min: 250 mm - Daylight between platens max: 900 mm - Platen size (h x v): 685 x 685 mm - Distance between tie-bars (h x v): 470 x 470 mm - Operating hours: n/a - Power: installed max: ? 30 kW - Weight: 6.630 kg - Dimensions (long x wide x high): 5.000 x 1.615 x 2.110 mm

coolant capacity: 50 - 250 m3l/h Headroom: 5 - 12 m operating pressure: max 1,2 bar voltage: 380 V / 50 Hz motor type: 132 M 4 motor speed: 1500 U/min Motor Capacity: 7,5 kW weight: 250 kg normal priming centrifugal pump, Housing and impeller made of stainless steel, Flange connections, Fabr. no. 22/00-125616 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pump Manufacturer: Allweiler Type: SRB114WW BS 10 1.5 m³/h Head 80 mtr. 1450 rpm NEW, from stock liquidation see pictures for more details.

with Robot WITTMANN W713-0114 - Screw diameter: 55 mm - Clamping force: 200 kN - Injection volume: 427 cm? - Mould opening stroke max: 650 mm - Platen size (h x v): 715 x 715 mm - Distance between tie-bars (h x v): 520 x 520 mm - Operating hours: 24.453 - Power: installed max: 15 + 30 kW - Dimensions (long x wide x high): 6.000 x 1.500 x 2.400 mm - Weight: 6.500 kg - Weight: 6.630 kg