alfa laval m3 used for sale

#4779 - HYDRAULIC POWER PACK WITH OIL COOLER Manafacture: Flutec Type: ÖK-1S3/1.0/M380-50 Year of construction: 1984 Motor power: 0.55 kW

: : 3200 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

equipped with Iemca Boss 432r/32LL new in 2002 - some tool holders - chip conveyor - Mitsubishi MELDAS 635 Control

bushing cut-off diameter range 1-4mm shaft length under head 25 mm max. cutting length 32 mm output- piece/min 350

Bolts, hex bolts, flange nuts, hex nuts, collar nuts -Hex nuts: M8 bis M30 645 kg -Sizes/number: see photo parts list -Price: complete -Total weight: 645 kg

Heavy duty lathe, lathe, lathe, center lathe and lathe, center lathe -Manufacturer: Meuser, master and feed spindle lathe type M3A -Turning length: 1400 mm -Swivel Ø over bed: 550 mm -Rotating Ø without bed: 800 mm -Rotating Ø over support: 300 mm -Spindle bore: Ø 58 mm -Spindle speeds: 15 - 810 rpm -Three-jaw chuck: Röhm Ø 250 mm -Faceplate: 500 mm -Accessories: incl. tool holder/tools see photos -Tailstock mount: MK5 -Dimensions: 2770/1070/H1310 mm -Weight: kg

Roof window roller shutters, blinds, roller shutters, roller shutter motor, tubular motor, radio tubular motor, roller shutter radio motor -Manufacturer: elero, roller shutter radio motor radio tubular motor -Type: RolTop M30-868 sonro -Torque: 30 Nm -Radio remote control: not included -Dimension: Ø 60 x 540 mm -Weight: 2.1 kg

Brush segment Quick Snap, brush, plastic brush, nylon brush, floor pads -Manufacturer: Tennant, Floor Pads 16 406 mm unused Ovp -Type: M32 Black -2 carton: content 5 pads per carton -Price: complete -Weight: 3.2 kg

Brush segment Quick Snap, brush, plastic brush, nylon brush, floor pads -Manufacturer: Tennant, Floor Pads 17 432 mm unused Ovp -Type: M32 Black -Carton: content 5 pads -Price: complete -Weight: 1.9 kg

Tool holder, milling holder, milling tool, -Manufacturer: May, milling adapter: SK50 with fine adjustment -Type: FGK3/SK50/N M14-M30 -Dimensions: Ø 98 x 300 mm -Weight: 5.9 kg

Servo motor, electric motor, DC motor, stepper motor, stepper motor, stepping motor -Manufacturer: Kessler, DC motor -Type: M30/36/2 -Max. Speed: 3045 rpm -Power: 7.5 kW -Voltage: 170/400 V see photo nameplate -Shaft: Ø 28 x 60 mm -Construction: B3 -Dimensions: 585/290/H340 mm -Weight: 115 kg

transformer -Marcus: M3785OT 80C RISE -VA: 1000 VA -Frequency: 60 Hz -Voltage: 230/120 V -Price: per piece -Number: 2 pieces available -Dimensions: 160/130/H110 mm -Weight: 11.3 kg

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Martonair type: M3332 150 DF -Stroke: 150 mm -Piston rod: Ø 25 mm -Number: 2 pieces available -Price: per piece -Dimensions: 90/130/H640 mm -Weight: 9.7 kg/piece

Three-phase motor, electric motor -Power: 0.25 kW -Speed: 870 rpm -Shaft: Ø 19 mm -Construction: B3 -Protection class: IP 55 -Dimensions: 270/155/H190 mm -Weight: 8.1 kg

Bending tool, die, lower tool, die tool, folding tool, press tool, forming tool, adapter -Die tool: forming tool/press tool adapter -Receptacle: Ø 40 mm -Receiving thread: M33 -Quantity: 2x adapters available -Price: per piece. -Dimensions: Ø 40 x 100 mm -Weight: 0.8 kg/pc.

Filament 3D printer working area 300x300x300mm

CITIZEN CINCOM M32 CNC turning center built in 2011 in Japan provides precision drilling, threading and turning of workpieces with a maximum diameter of 32 mm. To improve the machining process, the machine uses two spindles (main spindle and back spindle) with high rotational speed and power. A specially designed bed with high thermal stability further reduces the impact of heat during machining, increasing the life and reliability of all components. All machining parameters are programmed in the intuitive CINCOM SYSTEM M6D CNC control with many useful functions. Among the functions available, the controller allows, for example, self-diagnosis of the machine or program backup. High reliability, precision and extensive machining capabilities make the CITIZEN M32 III swiss-type lathe the ideal choice for even the most complex applications. The offer also includes extensive additional ...

The multi-purpose food processor SOLIA M30, consisting of a separate, Drive and various attachments, is suitable for rational connection and, Processing of food., Ideal for approx. 1000 catering units, The SOLIA M30 was specifically designed for such users in the catering industry, Hotel industry designed to prepare up to 1000 meals a day., - 3 x Solia M 30 basic device, 1 x Solia M20 basic device, - each with single-magnet hoods/attachments, - without frame, without cutting gate, whisk, knife, - 1 piece of attachment: meat grinder, - The engine blocks weigh approx. 30-40 kg (23x55x34 cm), - Various attachments

Description: Max. panel width 900 mm Max forward speed 48 mt/min Number of shafts 1 Motor Power 18.5 KW Max. cutting height 110 mm Approx. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 1 kg

Bread roll press Lippelt RotamatManufacturer : LippeltType : Rotamat GS/M30380 Volt, weight range from 30 - to 80 grams30 graduation including 3 knitting platesDetails see picture

: gebraucht : 2015 : 1686 : ca. 2 Wochen ab Auftragse : 22800 € : 1 : 330 mm : 1000 mm : 167 mm : 38 mm : 210 mm : 12 : 40 - 2500 1/min : 16 : 0.03 - 1 mm/U : 0.2 - 14 mm : 2 - 56 TPI Gänge/ : 190 mm : 92 mm : 42 mm : 3 MK : 110 mm : 2,2 kW : 1900 mm : 1000 mm : 1550 mm : 685 kg 3-axis digital read out Newall 4-jaw chuck Bison diameter 160mm with inside and outside jaws Quick-change tool post with 1 hold Coolant device Chuck protection Steel holder protection Lead screw cover Machine light Manual brake Operating manual in German with EC declaration of conformity The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Overview The micro brewery was manufactured in 1999 by theGerman manufacturer BERAPLAN. All equipment is in good condition. A new wort copper was added in 2018.  List of equipment: 1. Mash Tun Made by Beraplan in 1999 Cylindric shape with conical ground Material: stainless steel AISI 304 Inner diameter: 2000 mm Height: 1600 mm Height conical part: 20 0mm Volume: maximum 38 Hl Double sidewall Insulation Heated by steam, which can be regulated Hot and cold water inlet at the bottom Can be emptied through the bottom 4 CIP balls PT100 2 agitators Mach pump with variable speed drive 2. Lauter Tun Made by Beraplan in 1999 Cylindric shape with flat ground Material: stainless steel AISI 304 Inner diameter: 2000 mm Height: 1200 mm Volume: maximum 37 Hl Filtering ground with trapezoidal perforations High precision valve to regulate the flow rate Hot and cold water inlet at the bottom 4 CIP ball ...

Tami Industries Membralox microfiltration system, consisting of: Membralox tubular ceramic membrane filters (10 modules), 5 Fristam centrifugal pumps, type: FPE 1252 A, 3 Alfa Laval centrifugal pumps, type: LKH 80/235 FSS 55.0 kW, 19 Endress + Hauser flow meters, 19 Samson globe valves with actuator and positioner, s/s platform with stairs, various Alfa Laval valves and various switch cabinets, total dimensions: 8100 mm x 2400 mm x 4550 mm.

Used UF system ALPMA / TETRA ALVA LAVAL This plant was used for the following products: -Cream cheese - Quark (low-fat quark as well as quark with 20% and 40% FiT) - Skyr - Concentration of milk 3.7% fat to 37% dry matter Depending on the product, the hourly output is approx. 3,500 - 5,000 litres (milk intake) with a service life of 8 hours. The plant consists of 3 stages: Stage 1: - 6 pressure pipes 6" with 2 spiral winding modules each (filter type SPIRA-CEL DS-UP-IP020-6338E1 Mikrodyn Nadir GmbH) - Filter area per module: 13.4m² - Total filter area: 160.8 m² - Centrifugal pump 145 m³/h, 3.5 bar, frequency converter controlled Stage 2: - 4 pressure pipes (same design as stage 1) - Filter area: 107.2 m² - Centrifugal pump: 160 m3/h, 5 bar, frequency converter controlled Stage 3: - P&F module DSS M37/9/2 from TETRA ALFA LAVAL, 9 m² - Displacement pum ...

We have tons of processing equipment for sale, half of it has never been used. Products from suppliers like: Alfa Laval - Heat exchangers, pumps, valves etc, large stock. Tuchenhagen - Valves and pumps APV - Valves and pumps Samson - Steam valves (more than 20, never used) Spirax sarco - Steam traps, steam separators, never used Siemens (Danfoss) - Flow meters MAG5000 and MAG6000, mass flow meters MASS 3100, unsed and unused Danfoss - Frequency converters, VLT5000 and VLT6000 series, still in boxes, only a few left Mobrey, Emerson Process - Level sensors, SK267 flanges 50 pieces, density meters unused Fisher rosemont - Mass flow meters DN50, 3 pieces, unused Procesdata - PD340 flow meters, more than 30 pieces, also mod. C, extended version (DN25-DN80) Not on the list? We probably have it, why not try us? Best regards, Editec AB

Cat.-No. 14-00218 PET line for still and carbonated beverages Format: 1.5 L, production capacity: 20,000 bottles / h in a very good condition Year of construction: 2001 working hours: 42.389 the plant built up yet, but is currently out of operation Machine manufacturer year details Blow moulding machine SIG BLOMAX 16 2001 including molding water inlet, elevator and hopper, cooler (Rahim) Molding m Tanner VZT 3000 dosing system 2001 air transporters 2001 buffer tank 14 m³ Alfa Laval 2001 short time pasteurisation KHS Innopro KZE 2001 330 HL / h Triblock (Rinser, filler, Capper) KHS Innoclean/Innofill 120/10 2001 volume filler Capsule conveyors with supply tank Filling height control HEUFT basic 2001 labeller KHS Anker 2001 label control HEUFT HBF 150000 ST 2001 laser encoder video Jet 3430 2001 shrink film Packer SMI SK 800 T 2001 tray Packer in 6 Pack film (50 ppm)  ...

Inline powderdissolver Suitable for cold blending/dissolving powders such as sugar, milkpowder, starch, etc in liquids such as milk, water, etc. Capacity up to 100 kg powder per min, depending on product property's. Power consumption 7.5kW Equipped with overhauled centrifugal pump. ( Frsistam, Alfa Laval, or equivalent) Newlike condition.

The powder mixer can be used in any situation where powder is first added and then dissolved in the liquid. Capacity up to 100 kg/min, depending on product properties. Including stainless steels preparation table. Engine power 7.5kW. Equipped with overhauled centrifugal pump. ( Frsistam, Alfa Laval, or equivalent) As good as new.

Inline powderdissolver, suitable for cold blending/dissolving powders such as sugar, milkpowder, starch, etc in liquids such as milk, water, etc.capacity up to 150 kg powder per min, depending on product property's. Power consumption 11 kW Equipped with overhauled centrifugal pump. ( Frsistam, Alfa Laval, or equivalent) Newlike condition.

very well maintained APV tubular UHT plant. Suitable for the sterilization of highly viscous product with high dry matter, such as sauces and concentrates. Capacity in currently setup variable up to ± 3000l / hr. ( capacity up to 6000 lt/hr for low viscous products is possible with bigger homogeniser) Equipped with 2 ALFA LAVAL SHL20 Homogenizers, one in aseptic execution and with ball valves. Supplied with complete documentation and many spare parts. Yom. 1993, excellent condition.

Description Brand Pro Froid Model Copeland Scroll ID SH4797 Status Active Year of manufacture 2010 Location Bucure?ti / Bucharest (RO) Old price: 13 500 Euro. 1. Refrigeration and Climate Circuit 1.1. Pro Froid (Franta) GC4/CCR3SH 4PCS15ZC/SC Packed air cool condensing unit: • 3 pcs. Semi-hermetic Piston Bitzer 4PCS 15.2Y compressors • 3 pcs. crankcase heater • 1 pc. Liquid receiver • 1 pc. HP and LP safety pressure switches • 3 pcs. HP safety pressure switches • 3 pcs. LP safety pressure switches • 3 pcs. electric panel boxes – IP 54 • 3 pcs. electrical engine protection devices • 3 pcs. Mounted valves on compressors • 1 pc. Automatic electric panel • 1 pc. oil management system 1.2. Electric and control panel 1.3. air cooled condenser S060 3MSC 6PH/6PL SV 1.4. Helpman / Alfa Laval coolers / ventilators / fans – 17 pcs. 1.5. Electri ...

Qty. 1 Second-hand paper mill Mfc.: Valmet , METSO, Voith, Honeywell, Siemens, Ahlström Sulzer, Clark & Vicario, Andritz, Alfa Laval, GL & V Hedemora, Beloit, Tampella, Built: 1971 Rebuild: 1990 & 2004 Product: Uncoated magazine paper Production capacity: 290 000 tonnes Basic weight range: 44 – 57 g/m2 Width: 8.35 m Speed: 1500 m/min Raw materials: groundwood pulp, thermomechanical pulp, chemical pulp and fillers Headbox Mfc.: Valmet Type: OptiFlo 2 with dilution profiling (2004) Wire section Mfc.: Valmet Type: OptiFormer LB (loadable blades) (2004) Press section Mfc.: Valmet Type: SymPress B with 4th press (1990/2004) – shoe press in 3rd nip (2004) Drying section Mfc.: Valmet Type: SymDry (1990) – 4 single tier drying groups 2 double tier drying groups – ropeless tail threading (1990/2004) Max designed structural speed of parts rebu ...

Besides used, reconditioned separators and decanters of trademarks of GEA Westfalia Separator, Flottweg and Alfa Laval delivers more centrifuge designs, two fluids of different densities used for the drying of solids, the clarification of liquids or the simultaneous separation - hence separating centrifuge - Centrimax. Also these industrial centrifuges are by Centrimax, overhauled, with a new plc and delivered with a mechanical warranty.

NANO FILTRATION & REVERSE OSMOSIS PLANT USED FOR WHEY CONCENTRATION FEED CAPACITY: 20.000 LITER PER HOUR OUTLET: 22 % SOLID RATIO ALFA LAVAL AND FRISTAM PUMPS VERY GOOD MECHANICAL CONDITION YOM: 2002

Used Sabroe DXA26F water cooled chiller. Complete with a Sabroe / Stal S26B screw compressor, ABB M2FA 315 SMA 2 V36 elektromotor: 50 Hz - 200 kW - 2977 RPM, Alfa Laval MK15-BWFDR plate heat exchanger as condenser with a volume of 201,9 liters, plate heat exchanger as evaporator, oil seperator, oil cooler, Grundfos MG160MB2-42FF300-H3 water pump, VEM K21R 63 G 2 /2292 pump and pressure and safety switches and a Siemens Simatic HMI display. Product specifications: Brand: Sabroe Type: DXA26F Product type: Water Cooled Chiller Capacity kW: 630,0 (Capacity based on -9°C/+40°C) Capacity Tons: 179,1 Refrigerant: NH 3 (ammonia) Refrigerant Type: R717 Weight in kg: 6.545 Sizes: 4950x1800x2670 mm (LxWxH) Compressor(s) type & model: Stal S26B Display: Siemens Simatic HMI

Spaltefilter,rustfrit syrefast stål,Alfa Laval,type LKSF-CL-38

Vakuumtromlefilter,rustfrit stål,Alfa Laval 2,08 m² overflade,Ø 1200 x 600 mm.

Dekanter,rustfrit stål,Alfa Laval Foodec 209,komplet med styreskab.

Centrifuge,rustfrit stål,Alfa Laval type 2181M,for mælk / fløde.

Compressor Bitzer Type: S6H-20.2Y Volume: 73.6 m3/h Cooling capacity for R404A: 32 kW at -25°C/40°C, 20 kW at -40°C/40°C, 13 kW at -50°C/40°C Bottle capacity: 73 l Dimensions: 1330x1150x1300 mm Items in magazine: 1 Condition: Used in good condition In set with: Cool Gea Cuba Type: SGKE 50-F61 (x2) Cooling capacity for one: 9,3 kW at DT8, 7,5 kW at DT7 Surface: 39 m2 Air flow: 6300 m3/h Fin spinning: 10 mm Electric heaters Fans: 1x500 mm Dimensions: 1680x800x750 mm Refrigerant: Freon Volume: 13 l Quantity in stock: 2 Condition: Used in good condition Price on request, We have many other equipment : Bitzer, Copeland, Frascold, Lunite, Kueba, Guentner, Eco, Alfa-Laval, Goedhart, Helpman

Chiller chiller Uniflair Type: ARAF1204A Cooling capacity: 276 kW 4 x compressor performer scroll type: SZ 300 Shell-and-tube heat exchange Refrigerant: Freon R407 2 circles Freecooling Dimensions : 5242 mm x 1344mm x 2140mm In very good condition Number in stock: 1 piece, Price on request, We have other used refrigeretion equipment like: BITZER, Copeland, Frascold, Lunite, Kueba, Guentner, eco, Alfa-Laval, Goedhart, Helpman

Condenser GUENTNER Type: S GVH 080.1A/2x5 L(S) Cooling capacity: 673.4 kW Air volume flow: 151 000 m3/h Number of fans: 10 x 800 mm Dimensions: 10000 mm x 2300 mm x 1800 mm Volume: 300.3 l Number of pieces in stock: 2 Reference number: SK13 Condition : Used in good condition Price on request, We have many other Kealte plants : Bitzer,Copeland,Frascold,Lunite,Kueba,Guentner,Eco,Alfa-Laval,Goedhart ,Helpman

Condenser GUENTNER Type: GVH 090.1A/3-N(D) Cooling capacity: 305.5 kW Air volume flow: 89 400 m3/h Number of fans: 3 x 900 mm Dimensions: 6600 mm x 1140 mm x 1500 mm Volume: 89.2 l Number of pieces in stock: 1 Reference number: SK17 Condition : Used in good condition Price on request, We have many other Kealte plants : Bitzer,Copeland,Frascold,Lunite,Kueba,Guentner,Eco,Alfa-Laval,Goedhart ,Helpman

Composite equipment Bitzer with original condenser Freezer / normal cooling -4x compressor Bitzer 6F-40.2Y -Cooling capacity: 330 kW at -10oC/40oC, 180 kW at -25oC/40oC, 100 kW at -35oC/40oC -Volume: 4 x 151.6 m3 -Number of pieces in stock: 2 pieces -Refrigerant: Freon -With original condenser -In very good condition Price on request, We have many other Kealte plants : Bitzer,Copeland,Frascold,Lunite,Kueba,Guentner,Eco,Alfa-Laval,Goedhart ,Helpman

Compressor Bitzer Type: HSK6461-40 Volume: 165 m3/h Cooling capacity: 57kW at -10ºC/40ºC R134a Number of pieces in stock: 1 Reference number: S2 Condition : Used in good condition Price on request, We have many other cold machines : Bitzer,Copeland,Frascold,Lunite,Kueba,Guentner,Eco,Alfa-Laval,Goedhart ,Helpman

Condenser Guntner Type: GVH 100.2B/2x5-S(S) Cooling capacity: 660 kW Number of fans: 10 x 1000 mm Dimensions: 12000 mm x 2291 mm x 1430 mm Number of pieces in stock: 1 Reference number: SK28 Condition: Used in good condition Price on request, We have many other Kealte machines : Bitzer,Copeland,Frascold,Lunite,Kueba,Guentner,Eco,Alfa-Laval,Goedhart ,Helpman

Compressor Copeland Type: ZP385KCE-TWD524 Volume: 61 m3/h Cooling capacity: 66 kW at -5°C/40°C, 54 kW at -10°C/40°C, 35 kW at -20°C/40°C R404A Quantities in stock: 2 Reference number: S54 Condition: Used in good condition Price on request, We have many other cold machines : Bitzer,Copeland,Frascold,Lunite,Kueba,Guentner,Eco,Alfa-Laval,Goedhart ,Helpman

Compressor Copeland Type: ZP295KCE-TWD-524 Volume: 46.7 m3/h Cooling capacity: 51 kW at -5°C/40°C, 42 kW at -10°C/40°C, 27.5 kW at -20°C/40°C R404A Quantities in stock: 2 Reference number: S55 Condition: Used in good condition Price on request, We have many other cold machines : Bitzer,Copeland,Frascold,Lunite,Kueba,Guentner,Eco,Alfa-Laval,Goedhart ,Helpman

Evaporator KUBA Type: SGBE 141 Cowl power: 29.2 kW at DT8 Lamel distance: 7 mm With electric heating Number of fans: 1 x 710 mm Dimensions: 1600 x 1300 x 1400 mm Cold agent: Freon Volume: 44 ltr Number of pieces in stock: 5 Reference number: CH149 Condition: Used in good condition Price on request, We have many other refrigeration systems : Bitzer,Copeland,Frascold,Lunite,Kueba,Guentner,Eco,Alfa-Laval,Goedhart ,Helpman

Chiller LENNOX Type: NAC 270D NM1M Cooling capacity: 272.8 kW 2 x compressors Copeland: ZP295KCE-TWD-524 and 2 x compressors Copeland ZP 385KCE-TWD-524 R410A Built: 2008 Dimensions: 3600 mm x 2300 mm x 2000 mm Number of pieces in stock: 1 Condition: Used Price on request, We have many other cold machines : Bitzer,Copeland,Frascold,Lunite,Kueba,Guentner,Eco,Alfa-Laval,Goedhart ,Helpman