136,793 used machines on RESALE, but how to find them? Machine Search
ALFAMACCHINE M400 miter sawmill Two-Saw for 45 Degree Cutting Blade diameter 400mm Saw hole diameter 30mm Saw speed 3000 r.p.m 2×1.5 kw motors Air Requirement 5-7 bar Cutting Width: 15-100mm Cutting height: 10-80mm Coolant feeding system when cutting aluminum Machine dimensions: length 3160mm, width 700mm, height 1570mm Machine Weight 400kg
Line is consisting of:, Tetra Pak Laval Hoyer extrusion line, Type: ARB.BORD IND, Serial number: 348-5214, Year of construction: 1998, Capacity: 27000 sandwiches/hr, Tetra Laval Food Hoyer spiral freezer, Type: ST LINE 1100, Serial number: 348-1023, Year of construction: 1998, Refrigerant: NH3, Ammonia, Evaporator: 2 pc. Retech GLS 50-18-280, Tetra Pak Laval Hoyer dip and transfer unit, 12 lane, Tetra Pak Hoyer 6 lane wrapper, Type: HOYWRAP MW1200-6, Serial number: Z415.3872, Year of construction: 1998, Tetra Pak Hoyer, Type: HOYPACK FLEX TL, Serial number: Z423.1013, Year of construction: 1999
Alfa Laval BRPX 313 SFD-34C Tools control panel
Refrigerated display for promotional products to increase the sales. In very good conditions, suitable for every supermarket. Thecnical features: Dimensions 200x100x90h Power input 220 Volt Gas Propane R290 Automatic defrost Digital display Working temperature 0/+8°C Each product is refurbished, tested and cleaned internally and externally. Ready to use
Alfa-Laval multistage / centrifugal 3-stage pump YOM 2001 22 KW 2930 RPM Made in Denmark
For sale: Homogeniser Alva Laval SHL25 capacity 2850-7800 L/H 250 bar
Pilot plant with 3x used Tetra Laval Food - Schroder Kombinator VWK01/60-400 Scraped Surface Heat Exchangers (SSHE) for heating and/or cooling of liquid, viscous, high viscous and crystalline products. 1x used for heating, 1x used for cooling with city water and 1x used for cooling with R22 (Freon). 3x independent motors with mechanical variators for adjusting the speed. Hotwater preparation unit. Stainless steel control panel with relays controls, 3x Ampere meters, Temperature control unit, controls for feedpump and cleaningpump (pumps itself excluded). Cooling compressor (R22 Freon). Power: 380 Volt - 50 Hz - 3 Ph - 31 A. Manual available., Capacity: 20 - 100 kg/h (depending on product / trial specifications), Max. working pressure: Up to 25 bar, Cooling medium: R22 (Freon), Total Power Consumption: 380 Volt - 50 Hz - 3 Ph - 31 A, Dimensions: 240 x 140 x 200 cm, Weight: 1.000 kg
Cooled with agitator, 400 volts Auction-ID: A1-50763-25
Stock number: R1097, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 2 pcs., Item: Agitator, Agitator type: 3-blade propeller, Agitator placement: For side mounting, Propeller size: D 230 mm, Motor: 2.2 kW - 220/380 Volt - 930 rpm
Stock number: R1098, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 2 pcs., Item: Agitator, Agitator type: 3-blade propeller, Propeller size: D 180 mm, Shaft lenght: L 200 mm, Shaft diameter: D 30 mm, Motor: 1.5 kW - 220/380 Volt - 950 rpm
Stock number: PT2051, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Lobe pump head, Connections: Ø 2, Displacement: 0,554 l/rev., Working pressure: Max 10 bar, Manufacturer: Alfa Laval, Type: LKP-L 4055, Other: Horizontal passage - Flushed shaft seals
Stock number: SF059, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Vacuum drum filter, Surface: 2,08 m², Dimensions: Ø 1200 x L 600 mm, Motor: Adjustable speed - 1,5 kW - 380 Volt - 16-144 rpm., Manufacturer: Alfa Laval, Other: The filter needs overhauling before use
Stock number: PC1382, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Centrifugal pump, Motor: 2,2 kW - 220/380 Volt - 1420 rpm, Theoretical capacity: Max 14000 l/h, Working pressure: Max 4 bar, Other: Self priming
Stock number: PT1554, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Lobe Pump, Construction: Mounted on stainless foundation, Connections: Ø 1½, Motor: 0,75 kW - 233 rpm. - Gear motor , Theoretical capacity: 252 l/h., Manufacturer: Alfa Laval, Type: SX 1 007 H, Other: Flushed shaft sealing - Vertical flow
Stock number: PC1372, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Centrifugal pump, Impeller: Ø 115 mm, Motor: 0,55 kW - 230/400 Volt - 2870 rpm, Theoretical capacity: Max 10000 l/h
Stock number: PC1373, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Centrifugal pump, Impeller: Ø 115 mm - 4 vanes, Motor: 0,55 kW - 220/380 Volt - 2770 rpm, Theoretical capacity: Max 5000 l/h, Working pressure: Max 4 bar
Stock number: PC1256, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Impeller pump, Motor: 1,5 kW - 220/380 Volt - 450 rpm, Connections: Ø 2½
Stock number: PC1013, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Centrifugal pump, Motor: 0,37 kW - 220/380 Volt - 235 rpm
800 litre, Stock number: T3793, Litre: 800, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Vacuum de-aeration tank, Standing: 4 pcs. legs, Top: Conical, boltet, Bottom: Conical, Tank cover: In the side, Ø 460 mm, Agitator: Yes, Motor: 4.0 kW - 400/660 Volt - 1435 rpm, CIP: 3 pcs., Inner diameter: Ø 1000 mm, Total height: H 2300 mm
1,250 litre, Stock number: T3552, Litre: 1250, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Cooling tank, Standing: Frame with 6 pcs. legs, Top: Open, Double jacket: Yes, Insulated: Yes, Outer cladding: Fully welded stainless, Motor: Cooling compressor, Inner diameter: Ø 1300 mm, Outer diameter: D 1420 mm, Dimensions: L 2170 x H 1200 mm
175 litre, Stock number: T2897, Litre: 175, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Vacuum tank, Standing: On 3 pcs. legs, Double jacket: Cyclone with double jacket, Inner diameter: Ø 500 mm, Other: Washing ball in the top - Condenser in the top
650 litre, Stock number: T2812, Litre: 650, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 2 pcs., Item: Cheese vat, Double jacket: Yes, Agitator: From bridge in the top, Other: Miscellaneous tools
15,000 litre, Stock number: T1579, Litre: 15000, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Cheese vat, Standing: On legs, Double jacket: Yes, Insulated: Yes, Outer cladding: Fully welded stainless, Agitator: Yes, Agitator type: Double-acting framed agitator from the top, Agitator placement: From the top, Inner diameter: Ø 2900 mm, Outer diameter: D 2989 mm, Total height: H 4330 mm
Stock number: R1258, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Homogenizing agitator , Agitator placement: From the top, Propeller size: Ø 110 mm, Shaft lenght: L 935 mm, Motor: 3 kW - 230/400 Volt - 2910 rpm
The Alfa Laval 518 separator is a type of centrifugal separator designed to separate liquids and solids based on their density. The height adjusting ring is an important component of this separator that plays a crucial role in the adjusting and controlling of the separation process., Key Features of the Height Adjusting Ring:, - Function: The ring allows for adjustments in the height of the separators bowl. This can impact the sedimentation rate and the efficiency of the separation process., - Applications: Used mainly in food processing, beverage production, and chemical industries for clarifying liquids or separating solids from liquids., - Material: Typically made from durable materials that can withstand the operational conditions of the separator, including corrosion resistance., - Installation and Adjustment: Proper installation and adjustment of the height adjusting ring are essen ...
302 hL – Alfa Laval – 316L temperature-controlled stainless steel tank with sloping flat bottom 2% ALFA LAVAL stainless steel tank in 316L of 302 hL, temperature-regulated, designed for storage in demanding environments. Its design with a flat bottom inclined 2% facilitates emptying and work in the cellar, while offering a large storage capacity. Technical characteristics Flat bottom tank inclined 2% Brand: ALFA LAVAL Total capacity: 30,200 litres Material: stainless steel 316 L Interior finish: Cold rolled raw Exterior finish: Cold rolled raw Thermoregulated Conical roof 1 eccentric chimney at the front Ø 200 mm 2 Stainless steel flags 1 thermometer 6 lifting rings Ferrule 1 oval door 310×420 mm 1 partial drain valve DN 65 1 tap for level probe Flat bottom inclined 2% with housing 1 total drain valve with plug Dimensions Diameter: 2800 mm Total height: 6000 mm Ferrule ...
302 hL – Alfa Laval – 316L temperature-controlled stainless steel tank with sloping flat bottom 2% ALFA LAVAL stainless steel tank in 316L of 302 hL, temperature-regulated, designed for storage in demanding environments. Its design with a flat bottom inclined 2% facilitates emptying and work in the cellar, while offering a large storage capacity. Technical characteristics Flat bottom tank inclined 2% Brand: ALFA LAVAL Total capacity: 30,200 litres Material: stainless steel 316 L Interior finish: Cold rolled raw Exterior finish: Cold rolled raw Thermoregulated Conical roof 1 eccentric chimney at the front Ø 200 mm 2 Stainless steel flags 1 thermometer 6 lifting rings Ferrule 1 oval door 310×420 mm 1 partial drain valve DN 65 1 tap for level probe Flat bottom inclined 2% with housing 1 total drain valve with plug Dimensions Diameter: 2800 mm Total height: 6000 mm Ferrule ...
178 hL – Alfa Laval – 316L stainless steel tank with 2% sloping flat bottomALFA LAVAL 316L stainless steel tank with 178 hL, equipped for thermoregulation, ideal for storage and temperature management in the cellar. Its design with a 2% sloping flat bottom facilitates emptying and daily work, while maintaining a simple installation in the winery. Technical characteristics Flat bottom tank inclined 2% Brand: ALFA LAVAL Total capacity: 17,800 litres Material: 316 L Interior finish: Cold rolled raw Exterior finish: Cold rolled raw Conical roof 1 eccentric chimney at the front Ø 200 mm 1 thermometer Ferrule lifting rings1 oval door 310×420 mm 1 partial drain valve DN 65 1 level with tap Flat bottom inclined 2% with box 1 total drain valve with plug Dimensions Diameter: 2800 mm Ferrule height: 2800 mm Total height: 3500 mm Location: Civray Equipment sold loaded on truck ...
178 hL – Alfa Laval – 316L stainless steel tank with 2% sloping flat bottomALFA LAVAL 316L stainless steel tank with 178 hL, equipped for thermoregulation, ideal for storage and temperature management in the cellar. Its design with a 2% sloping flat bottom facilitates emptying and daily work, while maintaining a simple installation in the winery. Technical characteristics Flat bottom tank inclined 2% Brand: ALFA LAVAL Total capacity: 17,800 litres Material: 316 L Interior finish: Cold rolled raw Exterior finish: Cold rolled raw Conical roof 1 eccentric chimney at the front Ø 200 mm 1 thermometer Ferrule lifting rings1 oval door 310×420 mm 1 partial drain valve DN 65 1 level with tap Flat bottom inclined 2% with box 1 total drain valve with plug Dimensions Diameter: 2800 mm Ferrule height: 2800 mm Total height: 3500 mm Location: Civray Equipment sold loaded on truck ...
302 hL – Alfa Laval – 316L temperature-controlled stainless steel tank with sloping flat bottom 2% ALFA LAVAL stainless steel tank in 316L of 302 hL, temperature-regulated, designed for storage in demanding environments. Its design with a flat bottom inclined 2% facilitates emptying and work in the cellar, while offering a large storage capacity. Technical characteristics Flat bottom tank inclined 2% Brand: ALFA LAVAL Total capacity: 30,200 litres Material: stainless steel 316 L Interior finish: Cold rolled raw Exterior finish: Cold rolled raw Thermoregulated Conical roof 1 eccentric chimney at the front Ø 200 mm 2 Stainless steel flags 1 thermometer 6 lifting rings Ferrule 1 oval door 310×420 mm 1 partial drain valve DN 65 1 tap for level probe Flat bottom inclined 2% with housing 1 total drain valve with plug Dimensions Diameter: 2800 mm Total height: 6000 mm Ferrule ...
302 hL – Alfa Laval – 316L temperature-controlled stainless steel tank with sloping flat bottom 2% ALFA LAVAL stainless steel tank in 316L of 302 hL, temperature-regulated, designed for storage in demanding environments. Its design with a flat bottom inclined 2% facilitates emptying and work in the cellar, while offering a large storage capacity. Technical characteristics Flat bottom tank inclined 2% Brand: ALFA LAVAL Total capacity: 30,200 litres Material: stainless steel 316 L Interior finish: Cold rolled raw Exterior finish: Cold rolled raw Thermoregulated Conical roof 1 eccentric chimney at the front Ø 200 mm 2 Stainless steel flags 1 thermometer 6 lifting rings Ferrule 1 oval door 310×420 mm 1 partial drain valve DN 65 1 tap for level probe Flat bottom inclined 2% with housing 1 total drain valve with plug Dimensions Diameter: 2800 mm Total height: 6000 mm Ferrule ...
302 hL – Alfa Laval – 316L temperature-controlled stainless steel tank with sloping flat bottom 2% ALFA LAVAL stainless steel tank in 316L of 302 hL, temperature-regulated, designed for storage in demanding environments. Its design with a flat bottom inclined 2% facilitates emptying and work in the cellar, while offering a large storage capacity. Technical characteristics Flat bottom tank inclined 2% Brand: ALFA LAVAL Total capacity: 30,200 litres Material: stainless steel 316 L Interior finish: Cold rolled raw Exterior finish: Cold rolled raw Thermoregulated Conical roof 1 eccentric chimney at the front Ø 200 mm 2 Stainless steel flags 1 thermometer 6 lifting rings Ferrule 1 oval door 310×420 mm 1 partial drain valve DN 65 1 tap for level probe Flat bottom inclined 2% with housing 1 total drain valve with plug Dimensions Diameter: 2800 mm Total height: 6000 mm Ferrule ...
302 hL – Alfa Laval – 316L temperature-controlled stainless steel tank with sloping flat bottom 2% ALFA LAVAL stainless steel tank in 316L of 302 hL, temperature-regulated, designed for storage in demanding environments. Its design with a flat bottom inclined 2% facilitates emptying and work in the cellar, while offering a large storage capacity. Technical characteristics Flat bottom tank inclined 2% Brand: ALFA LAVAL Total capacity: 30,200 litres Material: stainless steel 316 L Interior finish: Cold rolled raw Exterior finish: Cold rolled raw Thermoregulated Conical roof 1 eccentric chimney at the front Ø 200 mm 2 Stainless steel flags 1 thermometer 6 lifting rings Ferrule 1 oval door 310×420 mm 1 partial drain valve DN 65 1 tap for level probe Flat bottom inclined 2% with housing 1 total drain valve with plug Dimensions Diameter: 2800 mm Total height: 6000 mm Ferrule ...
302 hL – Alfa Laval – 316L temperature-controlled stainless steel tank with sloping flat bottom 2% ALFA LAVAL stainless steel tank in 316L of 302 hL, temperature-regulated, designed for storage in demanding environments. Its design with a flat bottom inclined 2% facilitates emptying and work in the cellar, while offering a large storage capacity. Technical characteristics Flat bottom tank inclined 2% Brand: ALFA LAVAL Total capacity: 30,200 litres Material: stainless steel 316 L Interior finish: Cold rolled raw Exterior finish: Cold rolled raw Thermoregulated Conical roof 1 eccentric chimney at the front Ø 200 mm 2 Stainless steel flags 1 thermometer 6 lifting rings Ferrule 1 oval door 310×420 mm 1 partial drain valve DN 65 1 tap for level probe Flat bottom inclined 2% with housing 1 total drain valve with plug Dimensions Diameter: 2800 mm Total height: 6000 mm Ferrule ...
302 hL – Alfa Laval – 316L temperature-controlled stainless steel tank with sloping flat bottom 2% ALFA LAVAL stainless steel tank in 316L of 302 hL, temperature-regulated, designed for storage in demanding environments. Its design with a flat bottom inclined 2% facilitates emptying and work in the cellar, while offering a large storage capacity. Technical characteristics Flat bottom tank inclined 2% Brand: ALFA LAVAL Total capacity: 30,200 litres Material: stainless steel 316 L Interior finish: Cold rolled raw Exterior finish: Cold rolled raw Thermoregulated Conical roof 1 eccentric chimney at the front Ø 200 mm 2 Stainless steel flags 1 thermometer 6 lifting rings Ferrule 1 oval door 310×420 mm 1 partial drain valve DN 65 1 tap for level probe Flat bottom inclined 2% with housing 1 total drain valve with plug Dimensions Diameter: 2800 mm Total height: 6000 mm Ferrule ...
Item number: 1761655-81 Serial number: LA-3811-G Electrical connection: 440 V AC Phases: 3/PE Maximum oil temperature: 180 °C Maximum operating pressure: 0.6 MPa / 6 bar Test pressure: 2.25 MPa / 22.5 bar Oil volume: 9.4 liters Auction-ID: A1-51285-426
Pellet mill for straw / hay / alfalfa and much more ! Plant is about 500 hours. Running . Flat die 8mm and Koller head are included '
Multi-spindle woodworking boring machine with adjustable aluminium guides and two pneumatic hold-down clamps mounted on an overhead beam. Equipped with a pneumatic pressure regulator, pressure gauge, foot pedal and front-mounted controls with an emergency stop button. Year: 2003. Serial number: 300708. Electrical supply: 380 V, 50 Hz. Nominal current: 4.7 A. Made in Italy. Auction-ID: A1-50699-34
Including supply / positioning conveyor (3100x610x1640mm) with digital control panel. Auction-ID: A1-41281-5
Unique Alfa-Romeo GTV 2.0i manual transmission from 2000 from the first owner! Demonstrably had an engine overhaul 60,000 km back at Hedin Automotive. Colour dark grey metallic with black leather interior. Sporty version with black leather bucket seats, climate control, power windows and central locking. Aluminium rims, front fog lights and maintenance history available. From the first owner, collector's item! Interior neat, bodywork has some damage. Technically in order with MOT inspection until March 2027! Viewing by appointment Auction-ID: A1-40333-25
Very neat Alfa Romeo Gt from the year 1973. The car starts and drives without any problems. Documents available, see photos for details. The engine of the car was completely overhauled, photos of which are also available. Auction-ID: A3-46103-4163
Alfa Romeo GT Junior 1600 – GTAm Replica 2000cc Beautiful Alfa Romeo GT Junior 1600, converted into a sporty GTAm Replica with 2.0-liter engine. The car is equipped with various technical and sporty upgrades, aimed at performance, handling and driving pleasure. Technical equipment and modifications: 2.0-liter engine (2000cc) Limited slip differential High-pressure vacuum cleaners Electric fuel pump Electric cooling Additional oil cooler Stainless steel sports exhaust Perforated brake discs Brembo brake calipers Sporty bucket seat 4-point safety belts Brantz Tripmaster A characterful Italian classic with a pronounced sporty character. The combination of the powerful 2.0-litre engine, the limited slip differential and the modified brakes makes this GTAm Replica particularly interesting for fans of classic sports cars and historic rally cars. A unique Alfa Romeo for the ...
maximum number of results exceeded
please refine your search
250 € 
