alfa laval centrifuge used for sale

Main shaft for an Alfa Laval MRPX 214 TGV or MRPX 413 SGV Separator., Type of Machine: Main Shaft, Drive line: 50 Hz

Unused Bowl Spindle for an Alfa Laval MRPX 409 SGV Separator., Type of Machine: Bowl Spindle, Drive line: 50 Hz

Bacterial removing separator (Bactofuge). Self cleaning. Machine comes with the bowl, motor (22 kW), motor cover, base plate, feet, desludge cyclone, control panel (original Alfa Laval), OWM valve with waterbox (original Alfa Laval), all inlet/outlet pipes, service tools for maintenance including pressing tool. Instruction manual available., Type of Machine: Bactofuge (Bacterial-Removing Centrifuge), Capacity: 15.000 liter per hour, Bowl speed: 4.950 rpm, Motor: 22 kW - 380 V - 60 Hz - 1.750 rpm - 40 A, Dimensions: 180 x 130 x 175 cm, Weight: 2.130 kg

A complete plate heat exchanger pasteurization system Alfa Laval, consisting of four sections, is available. Product: 13% whole milk, throughput capacity: 25000kg/h, total capacity: approx. 2000kW, volume: 588l, max. pressure: 10bar, max. temperature: 120°C, test pressure: 14.3bar, number of plates: 338, expansion option: 82 plates, heat transfer area: 210m², plate thickness: 0.6mm, gasket system: Clip-On, gasket material: NBRFF, total pressure loss on the product side: 422kPa, heat exchange stages: regeneration/heating/intermediate stage/cooling, plate pack length: 1856mm, carrying bar length: 3600mm, tightening bolt length: 3560mm. Overall system dimensions X/Y/Z: approx. 3850mm/850mm/2200mm, weight: approx. 2850kg. Documentation available. An on-site inspection is possible.

Unused renovation kit for an Alfa Laval CPM Constant-Pressure Modulating Valve (CPMI-2) pneumatic regulating valve. Genuine Parts Service Kit CPMI - 2/XPMO - 2 Upper NBR, Lower EPDM/PTFE, part no. 9611920218., Type of Machine: Constant-Pressure Modulating Valve, Art. no.: 9611920218

Balancing valve, shut-off valve, ball valve, ball tap, pressure relief valve, control valve, flow switch, balancing valve -Manufacturer: Alfa Laval, control valve flow switch, unused -Type: RV4 Art.no.: 1762570-80 -Size: DN25 -Number: 2x valve available -Price: per piece -Dimensions: 125/104/H195 mm -Weight: 3.6 kg/piece

Alfa Laval BRPX 413 XGD-14 tools Used hydraulic capacity 18,000 l/h motor 30kW Centrifuge for food purposes / fat Very good condition

The SolidC UltraPure pump is an efficient and economical centrifugal pump that meets the requirements of pharmaceutical industries. It gently handles products and resists chemical agents., Pump: Centrifugal pump , Dn (mm): 34 , engine type: WEG, dn (mm): 34 , Engine power: 380 V 50 Hz 7.5 kW , Link to manufacturer: .alfalaval.fr/produits/transfert-des-fluides/pompes/pompes-centrifuges /solidc-ultrapure/

The SolidC UltraPure pump is an efficient and economical centrifugal pump that meets the requirements of pharmaceutical industries. It gently handles products and resists chemical agents., Pump: Centrifugal pump , Dn (mm): 34 , engine type: WEG, dn (mm): 34 , Engine power: 380V 50Hz 11kW , Link to manufacturer: .alfalaval.fr/

General SKU020A140 MakeAlfa Laval TypeContherm 6x4 No.HC-288 Year of constructionunknown Mounted on framecheck Main Features MaterialStainless steel Motor4 KW Surface0.4 m2 Specified Features - Scraped surface heat exchanger Scraped surface heat exchanger(1x) Heating surface0,37 M2 (4 Square Feet) Cylinder sizesdia. 152mm (6 Inch) With jacketcheck Motor4,0 KW, 380 Volt With variable speed drivecheck MaterialStainless steel With jacketcheck General LocationBarneveld Floorspace1,2x0,9 M Total height1,8 M Technical specs Extra informationcylinder size: 152 mmDiscountScraped surface heat exchangersAlfa LavalDiscountHeat exchangers > Scraped surface heat exchangersBrand > Alfa Laval What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect t ...

General SKU034G143 MakeAlfa Laval TypeContherm 6x3 No.HC-4844 NCC + HC-1802 NCC Year of construction1992 / 1982 Mounted on framecheck Material Product contact materialStainless steel 1.4301 (304) Pressure Working pressure20 Bar Working pressure jacket17.2 Bar Main Features MaterialStainless steel Motor15 KW Surface0.6 m2 Specified Features - Scraped surface heat exchanger Scraped surface heat exchanger(1x) Heating surface0,279 m2 each With jacketcheck Rotor can be cooled/heatedcheck Motor2x 7,5 kW (400 V, 1450 rpm) Speed177 rpm MaterialStainless steel 1.4301 (304) With jacketcheck General LocationBarneveld With switchcheck Floorspace1,3 x 1,0 m Total height2,0 m Weight650 kg Technical specs Extra informationworking pressure 20 bar (300 PSI) / 31 bar (450 PSI): jacket working pressure 15,5 to 17,2 barDiscountNew arrivalsScraped surface heat exchangersAlfa  ...

Alfa Laval M/TL Series Plate Heat Exchangers Condition: unused Manufacturer: Alfa Laval Lund AB (Sweden) Type: M/TL Series Gasket Plate Heat Exchanger This type of heat exchanger is often used in: - Food and beverage industry (milk, beer, juice, etc.) - the chemical and pharmaceutical industry - HVAC systems (district heating/cooling) - Industrial process plants for heat recovery and energy optimisation

Cream separator (Skimmer). Self cleaning. Machine comes with the bowl, motor (15 kW), motor cover, base plate with feet, outlet pipe instead of cyclone and all inlet / outlet pipes., Additional features:, � ��Excluding:, - Cyclone, - Waterbox with water valves., - Control panel., - Service tools for maintenance., Type of Machine: Cream Separator / Skimmer, Capacity: 12.000 liter per hour, Bowl speed: 4.450 rpm, Motor: 15 kW - 380/400 V - 50 Hz - 1.460/1.465 rpm - 30 A, Weight: 1.420 kg, Dimensions: 145 x 110 x 175 cm

Cream separator (Skimmer). Self cleaning. Machine comes with the bowl, motor (15 kW), motor cover, feet, cyclone and all inlet / outlet pipes., Additional features:, � ��Excluding:, - Baseplate., - Waterbox with water valves., - Control panel., - Service tools for maintenance., Type of Machine: Cream Separator / Skimmer, Capacity: 12.000 liter per hour, Bowl speed: 4.450 rpm, Motor: 15 kW - 380 V - 50 Hz - 1.455 rpm - 29,1 A, Weight: 1.420 kg, Dimensions: 145 x 110 x 175 cm

1 complete CIP system for dairies with 5 CIP pressure and return lines and automatic valves NW 65 and 100 6 horizontal tanks, standing on 4 feet, insulated, Diameter 2.65 m, height 3.40 m constantly brought up to date, with Siemens S 7 control system, in 4 control cabinets Year of manufacture 2001 with 1 horizontal caustic soda storage tank, double-walled, capacity 10,000 l with a black P100 nitric acid conc. Storage tank, double-walled, capacity 6,200 l

Cream separator (Skimmer). Self cleaning. Machine comes with the bowl, motor (15 kW), motor cover, base plate with feet, cyclone and all inlet / outlet pipes., Additional features:, � ��Excluding:, - Waterbox with water valves., - Control panel., - Service tools for maintenance., Type of Machine: Cream Separator / Skimmer, Capacity: 15.000 liter per hour, Bowl speed: 5.000 rpm, Motor: 22 kW - 380 V - 42 A - 1.450 rpm - 50 Hz - 3 Ph, Weight: ± 1.650 kg, Dimensions: 145 x 110 x 175 cm

General SKU255Y256 MakeAlfa Laval TypeBTPX-205 SGD-34-50 No.4026244 Year of constructionunknown Main Features MaterialStainless steel Capacity1200 Ltr./Hr. Motor6.5 KW Specified Features - Separator Separatorcheck Capacity1,2 m³/h Motor6,5kW, 380/660V, 2900rpm Max. rotor speedBowl speed 9631 rpm. Self-dischargingcheck InletDia. 45 mm Liquid outletDia. 70 mm Solids outletcheck MaterialStainless steel 1.4306 (304L), Stainless steel 1.4462 (318LN) With jacketcheck General LocationBarneveld Mounted on mild steel framecheck With switchgear(as is) Weight2100 kg Extra Specificationsdensity of sediment/ feed, max: 1302/1100 m³/hcomes with centrifugal pump and vessel:pump:brand:Alfa lavaltype: GM-1A/65motor: 0,55kW, 400VVessel:brand: Bucocapacity: 50 l.pressure: 2 bar.temperature: 120°Cyear: 1986New arrivalsSeparatorsAlfa LavalNew arrivalsCentrifuges > SeparatorsBran ...

General SKU212U086 LocationBarneveld CEcheck MakeAlfa Laval Type3H-C-1T Pressure Vacuum possiblecheck Working pressure shell10 Bar Vacuum possible shellcheck Working pressure tubes3 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface98 m2 Specified Features - Shell and tube heat exchanger Heat exchanger:spiral: Horizontalcheck Heating surface98 m² Tube capacity705 Ltr. Number of tubes:1 Wall thickness tubes2 mm Max. temperature0/100 °C Shell capacity1255 Ltr. Wall thickness shell2 mm Max. temperature0/100 °C Shell connectionsDN250, DN100 Cover connectionsDN100 (2x) Capacity830.8 kW MaterialStainless steel 1.4404 With jacketcheck General No.21965 Year of construction2002 Mounted on legscheck Floorspace1,85x1,3 m Total height1,85 m Weight4100 kgShell and tube heat exchangersOils & fa ...

Incomplete Cream separator (Skimmer). Self cleaning. Machine comes with the frame, bowl, hood, horizontal and vertical axle., Additional features:, � ��Excludin g:, - Motor., - Motorcover., - Baseplate and feet, - Waterbox with water valves., - Inlet / outlet pipes., - Control panel., - Service tools for maintenance., Additional with this stocknumber several unused and used spare parts., Type of Machine: Cream Separator / Skimmer, Capacity: 12.000 liter per hour, Bowl speed: 4.450 rpm, Weight: 1.420 kg, Dimensions: 145 x 110 x 175 cm

General SKU284Y445 LocationBarneveld MakeAlfa Laval TypeLabstak M20 Main Features MaterialStainless steel Specified Features - Miscellaneous filter Filtercheck Filter surface2,14 m² MaterialStainless steel 1.4552, Stainless steel 1.4301 (304), Stainless steel 1.4306 (304L) With jacketcheck General No.7764 Year of construction2005 Mounted on wheelscheck Floor space1,30x0,80 m Total height1,63 m Weight480 Extra Specificationsmax. capacity filter: 0,275 l.This filter system includes, among other things: An Enerpac hydraulic hand pump for hydraulically closing the stack filter. A plunger fluid pump equipped with a 3.0 kW, 400 V motor. An Alfa Laval heat exchanger, Type 107151Miscellaneous filtersAlfa LavalFilters > Miscellaneous filtersBrand > Alfa Laval What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for  ...

Equipment: Insulation,Manufacturer: Alfa Laval,Condition: used,Other: Dents in the insulating jacket 1 Heat exchanger has a total height of approx. 230 mm due to a flanged connection,Technical documentation: Drawing,Exchange surface: 11.5,last use: Pharmaceutical chemistry,Nameplate: Yes,Insulation: available,Material insulating jacket: Aluminium,Volume sheath space: 226,Material jacket: AISI316 (V4A) 1.4404,Max. permissible Operating overpressure jacket chamber: 4.2,Max. permissible Operating vacuum jacket space: 1.0,Max. permissible Operating temperature sheath chamber: 200,Volume pipe chamber:

The Alfa Laval SRU6/260/LS is a robust positive displacement lobe pump designed for the gentle and efficient handling of sensitive process fluids. Engineered in accordance with the most stringent hygienic design standards, the pump features fully validated and effective Cleaning-in-Place (CIP) capability. The SRU pump range is suitable for applications across the dairy, food, beverage, brewing, chemical, pharmaceutical, and home and personal care industries. Its smooth, low-shear pumping principle allows for the handling of products with a wide range of viscosities—from low to very high—including creams, gels, emulsions, aerated mixtures, and media containing delicate cells or organic solids in suspension. Products containing fragile solids, such as curd, can be transferred without damage due to the specially designed tri-lobe stainless steel rotors. The pump has a nominal displaceme ...

The Alfa Laval LKH Centrifugal Pump is a premium pump for use in hygienic applications. Designed for Cleaning-in-Place (CIP), the Alfa Laval LKH is ideal for hygienic applications within the dairy, food, beverage and personal care industries that require gentle product treatment and reliable operation. Motor: 2,2 kW - 380 V - 50 Hz - 2.900 rpm - 4,7 A. Diameter of the impellor: 140 mm. Connections on the inlet: SMS 2. Connections on the outlet: SMS 2. Current maximum capacity (based on the available Alfa Laval performance curves and the current motor): ± 32.000 ltr/h @ ± 1,1 bar., Additional features:, Maximum capacity of the pump with change of motor and impellor (based on the available Alfa Laval performance curves): 40.000 ltr/h @ 1,7 Bar., Exlcuding:, - Motorcover., Type of Machine: Sanitary centrifugal pump, Stock Number: 1512, Diameter of the impellor: 140 mm, Motor: 2,2 kW - 380 ...

horizontal tubular heat exchanger, Additional title: for CIP or hotwater, Media flow: 500 hl/h, Working pressure orifice baffle: 10 bar, Working pressure piping: 8 bar, Working temperature piping: 200 °C, Length: 1,05 m, Width: 0,6 m, Height: 1,1 m, Weight: 300 kg

Used Tetra therm aseptic pasteurizer - 2012Technical Specifications & Performance DataThis aseptic pasteurizer delivers reliable high-temperature short-time processing for demanding beverage production. Engineered within the Tetra Therm family and manufactured in collaboration with Alfa Laval, it is configured for aseptic operation with integrated deaeration for quality preservation in sensitive products. As a second hand unit from industrial packaging environments, it offers strong performance for a used bottling line or a standalone processing cell.Machine type: Aseptic Pasteurizer (Flash)Brand: Tetra Pak (engineered with Alfa Laval)Model: CM6-SMYear: 2012Production capacity: up to 12,000 L/h (current setting approx. 6,000 L/h)Maximum process temperature (TS): 125 °CMaximum allowable pressure (PS): 6.0 barTest pressure (PT): 8.6 barProcess volume: 162.0 LFluid group: 2Deaerator: Inclu ...

Used AMENDUNI complete oil prodaction line 20 qlhTechnical Specifications & Performance DataThis complete continuous-cycle olive oil line is engineered for efficient, high-throughput extraction with integrated handling, crushing, malaxing, separation, and decantation. Manufactured by AMENDUNI, it provides a robust platform for second hand industrial packaging and food processing environments, supporting seamless integration with downstream bottling and industrial packaging operations for edible oils.Operating mode: Continuous-cycle olive oil extraction lineManufacturer: AMENDUNIYear: 1987Throughput: Up to 20 quintals per hour (approx. 2,000 kg/h)Included equipment: olives conveyor, leaf remover, stainless steel hopper, screw conveyors, hammer crusher, 4 stainless steel malaxers, 2 paste pumps, 2 decanter centrifuges, pomace screw conveyor, 4 stainless steel decantation tanks, separators, ...

ALFA LAVAL brand plate exchanger model M6 FM, made of 316 stainless steel. INPUT - OUTPUT S1 - S2 S3 - S4 Volume 3 L 3 L Design pressure 0/10 bar 0/10 bar Design temperature 0/30 ºC 0/20 ºC Test pressure 13 bar 13 bar Maximum working temperature 30 ºC 20 ºC Year of manufacture 2014 Number of Plates 19 Unused

Used Bag in Box Filling Line (Manual Operation.) Filling volume 5-20ltr. Pre-made bags with sealing plugs Manual bag feeding, automatic removal of the sealing plug and re-insertion after filling. Capacity: 400-500 Bags/ shift (8 h) Year of construction. 2013, out of service since May 2025 Included: - Syrup tank 6,000 ltr. - CIP preparation - Hot glue auton ́mat with glue guns - Ink-jet encoder - Various pipelines, valves, conveyor belts and platforms. Disassembly by the buyer.

Used ALFA LAVAL oil lineTechnical Specifications & Performance DataThis complete olive oil processing line is engineered for continuous production with a throughput of 2 tons per hour. Built around proven Alfa Laval technology, the line combines robust mechanical design with food-grade materials to ensure reliable operation and consistent oil quality. Its modular configuration streamlines the core olive oil extraction steps from washing and preparation through malaxation and separation.Overall capacity: 2 tons/hourDecanter centrifuge: Alfa Laval NX 17Disc separators: Alfa Laval 407, automatic (2 units)Malaxers (double): Stainless steel (3 units)Malaxer (small): Stainless steel, with paste pump P 60 (1 unit)Crusher: Stainless steelOlive elevator: Integrated feedingOlive washer: Pre-cleaning and debris removalElectrical control panel: Alfa LavalConveying: Various screw conveyors for paste  ...

Used ALFA LAVAL oil extraction plant 2000 Kg/hTechnical Specifications & Performance DataThis complete olive oil processing line combines proven Alfa Laval separation technology with robust malaxing and preparation equipment to deliver reliable, continuous extraction performance. It is a second hand, industrial processing solution designed to operate upstream of an edible oil bottling and industrial packaging system, making it a strong fit for producers who wish to integrate a used bottling line or expand their beverage production and food oil processing capacity.Hourly throughput: 20 ql/h (approx. 2,000 kg/h of olives)Core equipment: Olive elevator, hammer crusher, malaxer 1 section, malaxer 4 sections, decanter centrifuge, two disc-stack separatorsDecanter centrifuge: Alfa Laval Type LWX 207Bowl diameter (decanter): 355 mmMax solids density (decanter): 1.7 kg/dm3Max bowl speed (decante ...

General SKU393U1105 LocationBarneveld CEcheck MakeKrauss Maffei TypeVZU 125/2,5 Main Features Materialmildsteel/halar Motor30 KW Inlet diameter80 mm Specified Features - Basket centrifuge Basket centrifugecheck Perforated basketcheck Capacity394 l Basket sizesø 1250 x 630 mm Wall thickness12 mm Max. loading weight500 kg With bottom dischargecheck Manual operatedcheck Liquid outletcheck Motor30 kW (400 V, 1500 rpm (Ex)) Max. basket speed950 rpm Max. temperature40°C Materialcarbon steel ST52 1.0570, Halar coating With jacketcheck General No.6000756 Year of construction2006 Mounted on foundation platecheck Floorspace2,5 x 2 m Total height1,7 m Weight5000 kg ATEX designedcheck Extra SpecificationsHalar coatedMetal contact parts Hastelloy-C Technical specs Extra information- halar coatedBasket centrifugesKrauss MaffeiCentrifuges > Basket centrifugesBrand  ...

General SKU393U1107 LocationBarneveld MakeKrauss Maffei TypeDZU 125/2,5 Main Features MaterialStainless steel/Halar Motor22 KW Inlet diameter50 mm Specified Features - Basket centrifuge Basket centrifugecheck Perforated basketcheck Capacity382 l Basket sizesø 1250 x 630 mm Wall thickness12 mm Max. loading weight477 kg With bottom dischargecheck With scrapercheck Hydraulic operatedcheck Liquid outletø 150 mm With hydraulic unitcheck Motor22 kW (400 V) Max. basket speed950 rpm MaterialHalar coating, Stainless steel 1.4571 (316Ti), Stainless steel 1.4581 (348) With jacketcheck General No.9670 Year of construction1983, rev 2001 Mounted on framecheck Floorspace2.5 x 1,5 m Total height1.5 m Weight3000 kg ATEX designedcheckBasket centrifugesKrauss MaffeiCentrifuges > Basket centrifugesBrand > Krauss Maffei What you can expect from Foeth: -- Machine is in worki ...

General SKU292T673 MakeLuwa-heine (DE) Type406 No.6107940 Year of construction1984 LocationBarneveld Main Features MaterialHastelloy Motor15 KW Inlet diameter40 mm Specified Features - Peeling centrifuge Basket sizesdia. 600x330 mm Wall thickness8 mm Max. loading weight56 kg Motor15 kW 380 Volt (Ex) Max. basket speed1950 rpm With scrapercheck Hydraulic operatedcheck InletDN40, DN25, Solids outlet180x140 mm Liquid outletdia. 17 MaterialStainless steel 2.4610 (Hastelloy C-4) With jacketcheck General Floorspace1,3x1,6 m Total height1 m ATEX designedcheck Extra Specificationsrebuilt by GFT Trenntechnik in 1994Peeling centrifugesHeine ZentrifugCentrifuges > Peeling centrifugesBrand > Heine Zentrifug What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are  ...

General SKU345S531 MakeFima Verfahrenstechnik (DE) TypeTZT-1300 No.88789/2 Year of construction1999 Mounted on framecheck Pressure Working pressure3 Bar Main Features MaterialStainless steel Motor55 KW Inlet diameter40 mm Specified Features - Basket centrifuge Basket centrifuge:Horizontal: Capacity800 Ltr. Basket sizesdia. 1300x600mm Wall thickness15 mm Max. loading weight380 kg Mechanical operatedcheck Motor55,0 KW, 400 Volt (Ex) With variable speed drivecheck Max. basket speed900 rpm MaterialStainless steel 1.4404 (316L) With jacketcheck General LocationBarneveld Floorspace3,8 x 1,9 m Total height2,8 m Weight± 9000 kg Extra SpecificationsFilter area: 2,4 m²Max. temp.: 150 °CProduct outlet: DN40Product inlet: DN40with:braking resistor: Frizlen, type: FA 3247002, 35 kWBasket centrifugesFima ProcessCentrifuges > Basket centrifugesBrand > Fima Process What ...

General SKU393U1106 LocationBarneveld MakeKrauss Maffei TypeVZU 125/2,5G Pressure Working pressure0.04 Bar Main Features Materialmildsteel/halar Motor37 KW Inlet diameter85 mm Specified Features - Basket centrifuge Basket centrifugecheck Perforated basketcheck Capacity400 dm3 Basket sizesø 1250 x 630 mm Wall thickness12 mm Max. loading weight500 kg With bottom dischargecheck Hydraulic operatedElektrisch Liquid outlet160 x 160 mm Motor37 kW (400 V, 985 rpm, (Ex)) Max. basket speed950 rpm Max. temperature25°C Materialcarbon steel ST52 1.0570, Halar coating With jacketcheck General No.11179 Year of construction1991 Mounted on framecheck Floorspace1,60 x 2,50 m Total height2,10 m Weight5500 kg ATEX designedcheck Extra SpecificationsWith spare motor, 3,2-32 kW, 380 volt, 100-985 rpm, 311 Nm,&:nbsp:Metal contact parts Hastelloy-CHalar coatedBasket centrifug ...

General SKU358U925 MakeKrauss Maffei LocationBarneveld CEcheck TypeHZ 1000 Ph Main Features MaterialStainless steel Motor36 KW Inlet diameter200 mm Specified Features - Peeling centrifuge Peeler centrifugecheck Capacity170,4 l (max. 171,8l ) Basket sizesDia. 1000 x 500 mm Wall thickness20 mm Max. loading weight213 kg Max. basket speed1500 rpm Motor36 kW (400V (Ex)) With scrapercheck Hydraulic operatedcheck Motor1,5 kW Solids outletDN200 MaterialStainless steel 1.4404 (316L) With jacketcheck General No.60000215 Year of construction2000 Floorspace3,2 x 1,8 m Total height2,0 m Weight9100 kg ATEX designedcheckPeeling centrifugesKrauss MaffeiCentrifuges > Peeling centrifugesBrand > Krauss Maffei What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are we ...

General SKU345S668 LocationBarneveld MakeKrauss Maffei (D) TypeHZ 125/3.2 Si No.11437 Main Features MaterialStainless steel Motor55 KW Specified Features - Peeling centrifuge Peeler centrifugecheck Basket sizesDia:1250 x800mm Wall thickness20mm Max. loading weight498 Kg With hydraulic unit(controls) Motor55 kW 380 Volt (EEx de II c T4) With variable speed drivecheck Max. basket speed1220 rpm With scrapercheck MaterialStainless steel 1.4571 (316Ti) Information Year of construction1994 Mounted on foundation platecheck Floorspace4,5x2,3 M Total height2,7 M Weight7000 KG ATEX compatiblecheck Extra Specifications-Filter area 3,14m². -Discharge with feedscrew. Peeling centrifugesKrauss MaffeiCentrifuges > Peeling centrifugesBrand > Krauss Maffei What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shi ...

General SKU372U1015 MakeEllerwerk LocationBarneveld CEcheck Type933H cGMP Main Features MaterialStainless steel Motor7.5 KW Inlet diameter25 mm Specified Features - Peeling centrifuge Peeler centrifugecheck Capacity30 ltr, (37,5 kg) Basket sizesDia. 500x300mm Wall thickness10 mm Max. loading weight37,5 Kg Motor400 volt, 7,5 kW, (Ex) Max. basket speed2500 rpm With scrapercheck Hydraulic operatedcheck With hydraulic unitcheck Motor2,2kW, 400Volt InletDN25 Solids outletDN100 Liquid outletDN25 MaterialStainless steel 1.4439 (317LMN), Stainless steel 1.4571 (316Ti), Stainless steel 1.4581 (316Nb) With jacketcheck General No.01.048 Year of construction2001 Mounted on framecheck With switchgear(as is) Floorspace2,5x1,6 m Total height2,15 m Weight3900 kg ATEX designedcheckPeeling centrifugesEllerwerkCentrifuges > Peeling centrifugesBrand > Ellerwerk What you c ...

General SKU434W1401 MakeFerrum TypePUR-1600 H No.47-1366 Year of construction1986 LocationBarneveld Main Features MaterialStainless steel Inlet diameter60 mm Specified Features - Basket centrifuge Basket centrifugecheck Capacity800 l. Basket sizesDia. 1600x800 mm Max. loading weight1000 kg With bottom dischargecheck Liquid outletDN200 Without motorcheck Max. basket speed0-750 rpm MaterialStainless steel 1.4401 (316) With jacketcheck General Mounted on foundation platecheck Floorspace3,20x2,50 m Total height3,10 m Weight10.000 kgBasket centrifugesFerrumCentrifuges > Basket centrifugesBrand > Ferrum What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many mo ...

General SKU366W1272 MakeFerrum LocationBarneveld CEcheck TypeHSZ PH 1000 Main Features MaterialHastelloy Motor30 KW Specified Features - Peeling centrifuge Peeler centrifugecheck Capacity215 kg Basket sizesdia. 1000x600 mm Max. loading weight215 kg Motor30kW, 380 volt, 1475 rpm, (Ex) Max. basket speed1500 rpm With scrapercheck Hydraulic operatedcheck With hydraulic unitOelhydraulilk SA 1565 with 2 pumps/motors Motor0,25kW, 400V, 1355 rpm (EX) (2x) Inletcheck Solids outletDia 250 mm Liquid outletDia. 100 mm MaterialStainless steel 2.4602 (Hastelloy C-22) With jacketcheck General No.Z-175886 Year of construction2007 Mounted on foundation platecheck Weight5000kgPeeling centrifugesFerrumCentrifuges > Peeling centrifugesBrand > Ferrum What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to  ...

General SKU358U928 MakeKrauss Maffei LocationBarneveld CEcheck TypeHZ 1000 Ph Main Features MaterialStainless steel Motor37 KW Inlet diameter200 mm Specified Features - Peeling centrifuge Peeler centrifugecheck Capacity170,4 l (Max 171,8 l) Basket sizesDia. 1000 x500 mm Wall thickness20 mm Max. loading weight213 kg Motor37 kW, 400 volt, (Ex) Max. basket speed1480 rpm With scrapercheck Hydraulic operatedcheck With hydraulic unitcheck Motor1,5 kW Inletcheck Solids outletDN200 Liquid outletcheck MaterialStainless steel 1.4404 (316L) With jacketcheck General No.60000261 Year of construction2001 Floorspace3,2 x 1,8 m Total height2,13 m Weight9100 kg ATEX designedcheckPeeling centrifugesKrauss MaffeiCentrifuges > Peeling centrifugesBrand > Krauss Maffei What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new --  ...

General SKU393U1104 LocationBarneveld MakeKrauss Maffei TypePZU 125 Main Features Materialmildsteel/halar Motor22 KW Inlet diameter50 mm Specified Features - Basket centrifuge Basket centrifugecheck Perforated basketcheck Capacity316 l Basket sizesø 1250 x 500 mm Wall thickness12 mm Max. loading weight550 kg With bottom dischargecheck Liquid outletø 150 mm With hydraulic unitcheck Motor22 kW (400 V, 1465 rpm) Max. basket speed950 rpm Materialcarbon steel ST52 1.0570, Halar coating With jacketcheck General No.8740 Year of construction1975 Mounted on framecheck Floorspace2.5 x 1,5 m Total height1.5 m Weight5000 kg ATEX designedcheck Extra SpecificationsHalar coatedMetal contact parts Hastelloy-CBasket centrifugesKrauss MaffeiCentrifuges > Basket centrifugesBrand > Krauss Maffei What you can expect from Foeth: -- Machine is in working condition -- At a redu ...

General SKU337T903 LocationBarneveld CEcheck MakeKMPT process technology TypeHZ 100/1.6 Si Main Features MaterialStainless steel Motor37 KW Inlet diameter65 mm Specified Features - Peeling centrifuge Peeler centrifugesyphon type Capacitynett: 157,5 Ltr. Basket sizesDia: 1250x700 mm Wall thickness20 mm Max. loading weight308 kg Motor37 kW, 400v, 1470 rpm, (ex) Max. basket speed1520 rpm With scrapercheck Hydraulic operatedcheck With hydraulic unitcheck InletDN 65 Solids outletDN 250 Liquid outletDN 125, DN 50 MaterialStainless steel 1.4404 (316L), Stainless steel 1.4462 (Duplex2205) Information No.60000886 Year of construction2007 Mounted on framecheck Floorspace5,35x4,5 m Total height3,5 m Weight5760 ATEX compatiblecheckPeeling centrifugesAndritz KMPTCentrifuges > Peeling centrifugesBrand > Andritz KMPT What you can expect from Foeth: -- Machine is in work ...

General SKU251U338 MakeEllerwerk LocationBarneveld Type937H Main Features MaterialStainless steel Motor37 KW Inlet diameter80 mm Specified Features - Peeling centrifuge Basket centrifugecheck Perforated basketcheck Wall thickness14 mm Max. loading weight300 kg Hydraulic operatedcheck Liquid outletDN150 Motor37,0 kW, 400/690 V, 1480 rpm (EX) With jacketcheck Peeling centrifuges Peeler centrifugecheck Capacity250 Ltr Basket sizes1050 mm Wall thickness14 mm Max. loading weight300 kg Motor37,0 kW, 400/690 V, 1480 rpm (EX) Max. basket speed1400 rpm With scrapercheck Hydraulic operatedcheck With hydraulic unitcheck Motor0,37kW, 400V. (EX) Liquid outletDN150 MaterialStainless steel 1.4404 (316L), Stainless steel 1.4439 (317LMN), Stainless steel 1.4581 (316Nb) General No.88030 Year of construction1988 Mounted on foundation platecheck Floorspace4,3 x 2,1 m To ...

General SKU246X193 MakeKrauss Maffei TypeHZ25 No.60000304 Year of construction2000 Mounted on framecheck Main Features MaterialStainless steel Motor2.2 KW Specified Features - Peeling centrifuge Peeler centrifugecheck Basket sizesdia, 250x120 mm Motor2,2 kW, 400 volt, 1400 rpm, (Ex) With variable speed drivecheck Max. basket speed500-3500 rpm With scrapercheck Manual operatedcheck InletDN25 Solids outletDN25 Liquid outletDN50 MaterialStainless steel 1.4404 (316L) With jacketcheck General LocationBarneveld Mounted on wheelscheck With switchgearcheck Floorspace1,10x0,70 m Total height1,50 m ATEX designedcheck Extra SpecificationsAdm. product density 2000 kg/m3, temperature range 100°CPeeling centrifugesKrauss MaffeiCentrifuges > Peeling centrifugesBrand > Krauss Maffei What you can expect from Foeth: -- Machine is in working condition -- At a reduced price c ...

General SKU299T699 MakeEllerwerk (Rebuild by Heinkel) LocationBarneveld CEcheck Type937H Main Features MaterialHastelloy Motor22 KW Specified Features - Peeling centrifuge Peeler centrifugecheck Capacity210 Ltr. Basket sizes1050x500 mm Wall thickness12 mm Max. loading weight230 kg Motor45.0 kW, 400/690 Volt, 1480 rpm.( EX) Max. basket speed1400 rpm With scrapercheck Hydraulic operatedcheck With hydraulic unitcheck Motor0,75 kW, 230/400 Volt, 1430 rpm (EX) InletDN 80, DN32 Solids outletDN 200 Liquid outletDN 150 MaterialStainless steel 2.4602 (Hastelloy C-22), Stainless steel 2.4610 (Hastelloy C-4) With jacketcheck General No.80.065/09.81.003 Year of construction1981/ ( rebuild 2010) Mounted on foundation platecheck Floorspace3,85x1,9 m Total height1,8 m Weight± 10000 kg ATEX designedcheck Extra SpecificationsThis Ellerwerk was completely overhauled by  ...

General SKU345X794 LocationBarneveld MakeCepa Carl Padberg Main Features MaterialStainless steel Motor1.3 KW Inlet diameter25 mm Specified Features - Basket centrifuge Basket centrifugecheck Perforated basketcheck Basket sizesDia. 400x250 mm Wall thickness10 mm Max. loading weight30 kg Liquid outletDN50 Motor0,9/1,3 kW, 380 volt, 700/1450 rpm, (Ex) Max. basket speed2380 rpm MaterialStainless steel 1.4571 (316Ti) Information TypeTZ4 Year of construction1987 Floorspace1,180x0,70 m Total height1,25 m Weight900 kg Extra SpecificationsWith ball spray, light, view glassBasket centrifugesCepa Carl PadbergCentrifuges > Basket centrifugesBrand > Cepa Carl Padberg What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld,  ...

General SKU439W1450 MakeSartorius Stedim Systems LocationBarneveld CEcheck TypekSep 400 Main Features MaterialStainless steel Motor1.5 KW Specified Features - Basket centrifuge Basket centrifugecheck Closed basketcheck Capacity480 ml Max. loading weight4x 100 ml Motor1,5kW, 400V MaterialStainless steel Information No.ATSK4000171325 Year of construction2013 Mounted on wheelscheck With switchgearcheck Floorspace1,075x0,72 m Total height1,40 m Weight350 kg Extra SpecificationsThrough the balance of centrifugal and fluid flow forces, the Ksep® retains particles such as cells or microcarriers, as a concentrated fluidized bed under a continuous flow of media or buffer. These are the only bowl centrifuges that do not stop rotating while discharging. The system can be operated under sterile conditions and all consumables are delivered pre-sterilized. : Max g-force 1,00 ...

General SKU204W057 MakeRousselet TypeRC 40 VX No.45189 Year of construction2008 Mounted on framecheck Main Features MaterialStainless steel Motor3 KW Inlet diameter50 mm Specified Features - Basket centrifuge Basket centrifugecheck Perforated basket6 mm Capacity15 kg Basket sizesDia. 400x260 mm Max. loading weight15 kg With bottom dischargecheck Manual operatedcheck Liquid outletcheck Motor3 kW, 230/400 volt, 2800 rpm, (Ex) Max. basket speed3000 rpm Max. temperature60°C MaterialStainless steel 1.4404 (316L) With jacketcheck General LocationBarneveld Mounted on foundation platecheck Floorspace1,10x0,70 m Total height1,60 m Weight550 kg CEcheck Extra SpecificationsWith filter unit and sieveBasket centrifugesRousseletCentrifuges > Basket centrifugesBrand > Rousselet What you can expect from Foeth: -- Machine is in working condition -- At a reduced price com ...

General SKU245U290 MakeKrauss Maffei LocationBarneveld CEcheck TypeSZ 51-8 Main Features MaterialStainless steel Motor18.5 KW Inlet diameter70 mm Specified Features - Pusher centrifuge Pusher centrifugecheck Basket diameterdia. 604 mm Basket width675 mm Wall thickness20 mm Max. loading weight53,6 kg Motor18,5 kW, 1470 rpm Max. basket speed665 rpm Hydraulic operated pushercheck With hydraulic unitcheck Motor11 kW, 3000 rpm Inlet70 mm Solids outlet300x80 mm Liquid outlet430x110 mm MaterialStainless steel 1.4539 (904L) With jacketcheck General No.11467 Year of construction1995 Floorspace2,58x1,20 m Total height1,9 m Weight2440 kg Extra SpecificationsTemperature range 10-110°, adm. density 1060 kg/m3Pusher centrifugesKrauss MaffeiCentrifuges > Pusher centrifugesBrand > Krauss Maffei What you can expect from Foeth: -- Machine is in working condition -- At a r ...