al used for sale

2X Alaris CC plus 1X Alaris TIVA 1X Alaris GS Auction-ID: A7-46412-34

Manufacturer: Metall Meister Type / Model: not known / not specified Mobile tool trolley / assembly table with cast aluminium chipboard (T-slot) Mobile tool trolley / work table Steel frame construction with castors, cast aluminium plate as work surface Design of the work surface: Cast aluminium plate with T-slots Suitable for clamping, assembly and straightening work Condition: Used Work surface: approx. 1200 × 800 mm Auction-ID: A7-46417-74

200 litre, Stock number: T4028, Litre: 200, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 3 pcs. legs , Top: Dished, Bottom: Conical, Inner diameter: Ø 500 mm., Total height: H 1520 mm., Manufacturer: Alfa Laval, Model/type: Vacuum tank type DD, Other: No condenser

Length 275 cm; total approx. 190 pieces Auction-ID: A1-46266-366

Condition: unchecked Item is sold as is Weight may be ggbfs. Deviate. Machine must be dismantled by the buyer and transported out of the hall area. It cannot be guaranteed that a forklift is on site. Auction-ID: A1-46354-39

Length 90 cm; Auction-ID: A1-46266-371

930x2315 mm right Auction-ID: A1-46266-323

Weld-on part with VTN / Martin old small mount, Dimensions of the mount:, Bolt diameter: 50 mm, Handle/mounting width: 190 mm, Bolt spacing [center - locking plate]: 320 mm

Underfloor aluminium circular saw - Hydropneumatic semi-automatic - pneum. Workpiece clamping device - Roller conveyor with material stop, length 3m - Feed roller conveyor, length 3m Machine color is blue Saw blade diameter 450 mm Cutting range at 90 degrees: around 130 mm Cutting range at 45 degrees: around 100 mm Cutting area at 90 degrees: flat 210 x 170 mm Cutting area at 45 degrees: square 145 x 170 mm Speed 2900 rpm Total power requirement 2.3 kW Machine weight approx. 600 kg Dimensions L x W x H 4.0 x 1.5 x 1.5 m Condition: never used / new (5) Auction-ID: A7-46460-412

New machine SPECIAL PRICE incl.: - Starter Kit 2 - Micro spray device Ready to be demonstrated in our exhibition Roller conveyors shown optional Fully automatic hydropneumatic machine · Mitre left/right · Head oblique cuts up to 45° (Schifter) a. b. · Pneumatic vertical clamping device · Vice before and after the saw blade Saw blade diameter 350 mm Cutting range at 90 degrees: around 120 mm Cutting range at 90 degrees: square 110 mm Cutting range at 90 degrees: flat 200x88 mm Cutting range at 45 degrees: around 115 mm Cutting range at 45 degrees: square 110 mm Cutting range at 45 degrees: square 150x80 mm Total power requirement 1.5/1.8 kW Machine weight approx. 0.59 t Dimensions L x W x H 1.1 x 0.95 x 1.7 m Auction-ID: A7-46460-416

ATTENTION! Vehicle is in Poland but can be brought to BE by seller for a fee! Auction-ID: A3-43524-13001

Manual underfloor aluminium circular saw Saw blade diameter 400 mm Cutting range at 90 degrees: around 120 mm Speed 1400 / 2800 rpm Motor power 4.0 kW Machine weight approx. 180 kg Dimensions L x W x H 1.0 x 0.9 x 1.2 m Auction-ID: A7-46460-419

Drilling machine with: Feed 2 gears Left/right rotation Footswitch Coolant Pump Machine Light Drilling capacity in steel 40 mm Projection 345 mm Drilling stroke 200 mm Table clamping area 720 x 560 mm Speed 60 - 765 rpm Feed rate 0.15 - 0.2 - 0.3 - mm/rev Tool holder MK 4 Total power requirement 3.0 kW Machine weight approx. 0.4 t Condition: unchecked (6) Auction-ID: A7-46460-507

Fully automatic hydropneumatic machine · Mitre left/right · Head oblique cuts up to 45° (Schifter) a. b. · Pneumatic double clamping device · Pneumatic vertical clamping device · Integrated coolant spraying device MPS Control: · Saving the start / end of the cut · Display of current consumption, number of pieces, cutting time... · Adjustable water cooling · Cutting pressure regulator Saw blade diameter 350 mm Cutting range at 90 degrees: around 120 mm Cutting range at 90 degrees: square 110 mm Cutting range at 90 degrees: flat 200x88 mm Cutting range at 45 degrees: around 115 mm Cutting range at 45 degrees: square 110 mm Cutting range at 45 degrees: square 150x80 mm Total power requirement 1.5/1.8 kW Machine weight approx. 0.59 t Dimensions L x W x H 1.9 x 1.4 x 1.8 m Auction-ID: A7-46460-530

-Front linkage -Front PTO -Top link in the front -Hydraulic top link at the rear -DW valve in front -4DW rear valves -Adjustable tow bar -Air brakes -Oil brakes -PTO 540/750/1000 -Reversing device -No documents Auction-ID: A3-43524-30087

Dimensions closed 2000x1500 mm, dimensions unfolded 2000x2100 mm, load capacity 7300 daN Auction-ID: A1-46480-3086

Hydropneumatic semi-automatic - Mitre left/right 45° - Head oblique cuts up to 45° (Schifter) - Ball-bearing table - Pneumat. Double clamping device - Machine base with mist spraying device - Chip extraction nozzle on saw blade protective cover Saw blade diameter 350 mm Cutting range at 90 degrees: around 120 mm Cutting range at 90 degrees: square 110 mm Cutting range at 90 degrees: flat 200x88 mm Cutting range at 45 degrees: around 115 mm Cutting range at 45 degrees: square 110 mm Cutting range at 45 degrees: square 150x80 mm Total power requirement 1.5/1.8 kW Machine weight approx. 0.27 t Dimensions L x W x H 1.1 x 0.95 x 1.7 m Auction-ID: A7-46460-614

Fully automatic hydropneumatic machine · Mitre left/right · Head oblique cuts up to 45° (Schifter) a. b. · Material feed unit with material hold-down device · Integrated coolant spraying device · MPS Control: · Saving the start / end of the cut · Display of current consumption, number of pieces, cutting time... · Adjustable water cooling · Cutting pressure regulator Saw blade diameter 350 mm Cutting range at 90 degrees: around 120 mm Cutting range at 90 degrees: square 110 mm Cutting range at 90 degrees: flat 200x88 mm Cutting range at 45 degrees: around 115 mm Cutting range at 45 degrees: square 110 mm Cutting range at 45 degrees: square 150x80 mm Total power requirement 1.5/1.8 kW Machine weight approx. 0.59 t Dimensions L x W x H 1.9 x 1.4 x 1.8 m Auction-ID: A7-46460-433