al used for sale

JGS 616 GS-N.L

Stock number: F742, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Alu seal welder, Construction: 4 holes circular table model - Semi-automatic, Motor: 600 W heating coil - 220 Volt, Manufacturer: Trepko, Other: Ellipse tooling, L 115 x W 72 mm.

Max. saw blade diameter: 550 mm Manual swivel with digital display Motor-controlled axis for tilting the saw blade with digital display and speed adjustment via potentiometer Stepless saw blade feed Minimum quantity spraying device Weight: approx. 1,000 kg

saw blade diameter: 350 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 110 mm capacity 90 degrees: flat: 200x88 mm capacity 45 degrees: round: 115 mm capacity 45 degrees: square: 110 mm capacity 45 degrees: square: 150x80 mm total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,59 t dimensions: 1,9 x 1,4 x 1,8 m Hydropneumatic Fully Automatic • Mitering Left/Right • Bevel cuts up to 45° (shifter) a. b. • Pneumatic double clamping device • Pneumatic vertical clamping device • Integrated coolant spray system MPS control: • Save cutting start/end position • Display of power consumption, piece count, cutting time, etc. • Adjustable water cooling • Cutting pressure regulator The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- Oscillating screen with 2 independent screening floors for sorting wood chips and shavings. - Equipped with interchangeable meshes, designed for the classification of fine chips used in the outer layers of chipboard, equipped with 10x10 mm - 2.20 - 2.28 - 0.21 meshes. - Operating conditions of this machine: unchecked. - EX WORKS Sale. Dismantling, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-43986-12

saw blade diameter: 350 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 110 mm capacity 90 degrees: flat: 200x88 mm capacity 45 degrees: round: 115 mm capacity 45 degrees: square: 110 mm capacity 45 degrees: square: 150x80 mm total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,27 t dimensions: 1,1 x 0,95 x 1,7 m - Hydropneumatic semi-automatic - Miter left/right 45° - head diagonal cuts up to 45° (shifter) - Ball bearing table - pneumatic. Double clamping device - Machine base with fog spray device - Chip extraction socket on the saw blade protective hood The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stamford AC Generator PE734C2 Electricity generator unknown year of construction with approx. 63,000 operating hours, 415 volts V/50 Hz. Manufacturer: Stamford Model No.: PE734C2 Type: AC Synchronous Generator Serial Number: A12K489419 Power [KVA]: 1,445 Voltage [V]: 415 Frequency [Hz]: 50 Current [A]: 2.010 Speed [1/min]: 1,500 Year of manufacture: unknown Operating hours [h]: approx. 63,000 Weight [kg]: 3,000 Dimensions LxWxH [cm]: 190 x 95 x 135

 Alu perforated baking trays 2 edge NEWAlu perforated trays 2 rim 580 mm x 780 mmPerforated tray 2 rim short  , rim height 10 mm , 45 degreesRound perforation 3.0 mmNominal material thickness 1.5 mmNEWDedetails see picture

 Aluminium perforated baking trays 3 rim NEW(10 pcs) Aluminium perforated trays 3 rim 580 mm x 780 mmPerforated tray 3 rim  , rim height 23 mmRound perforation 3.0 mmMaterial thickness 1.5 mmNEWDedetails see picture

 Aluminium Perforated Sheets 3 Rand NEW(10 pcs) Aluminium Perforated Sheets 3 Rand 600 mm x 400 mmPerforated Sheet 3 Rand  , Edge Height 23 mmRound Perforation 3.0 mmMaterial Thickness 1.5 mmNEWDedetails see picture

Miter saw, aluminum circular saw, aluminum semi-automatic circular saw, miter saw, glass bead saw -Processing of: flat, angle and solid material, pipes and special profiles -Saw blade: Ø 400 mm -Saw blade: swiveling -Drive: 2.5 kW -Speed: 2800 rpm -pneumatic material tension -pneumatic feed -with: chip extraction -Dimensions: 1100/900/H1160 mm -Weight: 238 kg

Container rotating device, welding rotating device, roller stand, rotators, pipe straightening system -Pipe straightening system for: steel pipes, with flame and water cooling Flame straightening -Drainage channel and water pump -Roller diameter: Ø 180 mm -Drive: PIV gearbox -electrically adjustable -Load capacity: 1 ton -Speed: min. 50 mm/min -Speed: max. 150 mm/min -Manual switch -Counter bearing: laterally adjustable -Drive dimensions: 3600/820/H850 mm -Dimensions of counter bearing: 2950/820/H850 mm -Empty weight: 1300 kg

standard cooler, car cooler, oil cooler, heat exchanger, hydraulic oil cooler, engine cooler, water cooler, standard cooler -Manufacturer: Nissens, cooler aluminum housing -Type: unfortunately no type designation -Number: 2x coolers available -Price: per piece -Dimensions: 675/110/H285 mm / 700/110/H290 mm -Weight: 7.5 kg / 7.7 kg

Aluminum crosscut saw, aluminum circular saw, aluminum semi-automatic circular saw, crosscut saw, glazing bead saw, metal crosscut saw, crosscut and miter saw, aluminum metal circular saw, light metal circular saw -Manufacturer: Berg & Schmidt, aluminum metal circular saw Velox 350 with solid base frame -Saw blade: Ø 350 mm / 1400/2800 rpm -Cutting height: 100 mm -Cutting width: 170 mm -Double miter: 45° -Drive: 1.3 / 1.7 kW -Double clamping device: pneumatic -Dimensions: 890/600/H1670 mm -Weight: 198 kg

conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor, flat belt conveyor -Manufacturer: MK Maschinenbau Kitz, belt conveyor on mobile base frame, height adjustable -Type: GUF-P 2000 AF 2900/600 -Speed: 13 m/min -Belt width: 590 mm -Conveyor length: 2900 mm -Drive: SEW-Eurodrive 0.12 kW, see photo nameplate -Case: VA -Transport dimensions: 2940/730/H1710 mm -Weight: 115 kg

Max. saw blade diameter: 280 mm Pneumatic material tensioners Swivel table with detent points Minimum quantity spraying device

suitable for e.g. Alfen S-Line Auction-ID: A1-44832-807

Allimex Allislide Mid Clamp 6 boxes with 100 pieces Auction-ID: A1-44832-63

End clamp Allimex Allislide 2 boxes with 100 pieces Auction-ID: A1-44832-57

Flat roof mounting kit for 72 panels (12 rows of 6) Consisting of: Supports, End clamps, Intermediate clamps, Bolts, Ballast holders and sheet metal screws (see photos). You must determine / calculate the required amount of ballast yourself, this is not included. Auction-ID: A1-44832-50

Allimex Allislide Mid Clamp 1 pallet with 24 boxes of 500 pieces Auction-ID: A1-44832-67

End clamp Allimex Allislide Pallet with 48 boxes of 100 pieces Auction-ID: A1-44832-60

3 Phase 16 amps IP55 LED Internet connection maximum charging capacity 11KW Auction-ID: A1-44832-812

Allimex Allislide Mid Clamp 1 pallet with 48 boxes of 100 pieces Auction-ID: A1-44832-65

Allimex cable clamp Allin 1 pallet with 48 boxes with 1000 pieces Total: 48000x bolt + 48000x knurled nut M8 Stainless steel Auction-ID: A1-44832-71

3 Phase 16 amps IP55 LED Internet connection maximum charging capacity 11KW Auction-ID: A1-44832-816

Flat roof mounting kit for 10 panels (2 rows of 5) Consisting of: Supports, End clamps, Intermediate clamps, Bolts, Ballast holders and sheet metal screws (see photos). You must determine / calculate the required amount of ballast yourself, this is not included. Auction-ID: A1-44832-48

Allimex Allislide Mid Clamp 2 boxes with 100 pieces Auction-ID: A1-44832-62

End clamp Allimex Allislide 6 boxes with 100 pieces Auction-ID: A1-44832-58

Allimex cable clamp Allin 10 boxes with 1000 pieces Total: 10000x bolt + 10000x knurled nut M8 Stainless steel Auction-ID: A1-44832-70

Allimex cable clamp Allin 5 boxes with 1000 pieces Total: 5000x bolt + 5000x knurled nut M8 Stainless steel Auction-ID: A1-44832-69

Screw compressor Alup Largo 76 Delivery volume 12,240 l/min Manufacturer: Alup Alup is part of Atlas Copco Machine number API 172497 Type Largo 76 Year of construction 2014 max. pressure 10 bar Power consumption 75 kW Delivery volume 12,240 l/min Total hours 28,418 B/h Load hours 28,130 B/h lxwxh 190x106x165 cm Weight 1,570 kg Loading costs 200.00 Euro Auction-ID: 04D-2WS-2

Allimex cable clamp Allin 2 boxes with 1000 pieces Total: 2000x bolt + 2000x knurled nut M8 Stainless steel Auction-ID: A1-44832-68

Allimex Allislide Mid Clamp 12 boxes with 100 pieces Auction-ID: A1-44832-64

End clamp Allimex Allislide 12 boxes with 100 pieces Auction-ID: A1-44832-59

Flat roof mounting kit for 36 panels (6 rows of 6) Consisting of: Supports, End clamps, Intermediate clamps, Bolts, Ballast holders and sheet metal screws (see photos). You must determine / calculate the required amount of ballast yourself, this is not included. Auction-ID: A1-44832-49

Screw compressor Alup Allegro 11 Year of manufacture 2022 3,400 B/h speed-controlled Manufacturer: Alup Alup is part of Atlas Copco Machine number ITJ 698213 Type Allegro 11 Year of construction 2022 max. pressure 13 bar Power consumption 11 kW Delivery rate 1,860 l/min at 7 bar Total hours 3,400 B/h Machine utilization: 1-20 1% 20-40 70% 40-60 17% 60-80 10% 80-100 2% Test run carried out lxwxh 118x68x95 cm Weight 259 kg Loading costs 50.00 Euro Auction-ID: 04J-7XX-1

with pre- and attached roller raceway and frame shelf

Aluminum angular rotor BECKMAN COULTER JA-25.50 Fixed angle rotor Max: 25,000 rpm, 75,600 x g Capacity: 8 x 50 mL Nominal capacity: 3,000 mL Biosecurity Lid For use with Avanti J Series and J2 Series Centrifuges (except J-21 Series)

Trestle ladder KRAUSE aluminium 2x4 steps

Trestle ladder KRAUSE aluminium 2x4 steps

Trestle ladder KRAUSE aluminium 2x4 steps

KRAUSE aluminium lean-to ladder with handrail, 13 steps

Folding ladder aluminium 5 steps

Trestle Ladder Aluminium 2x4 Steps

Folding ladder KRAUSE aluminium 5 steps

Pallet scale ALLPAX A 12 Max, nameplate not visible

Gantry ladder WÜRTH aluminium 2x7 steps

Articulated ladder aluminium 4x3 steps

Trestle ladder WÜRTH aluminum 3x2 steps