al used for sale

• For vials/bottles diam. 16-78 mm, height max. 220 mm, output max. 350 objects/min • Label length 15 - 200 mm, height 10-100 mm, label roll diam. max. 400 mm • Hot printing device Graseby Allen • Operation from left to right • Dispensing table adjustable in height, depth across direction, inclinaton across direction • Code reading Laetus Argus 6 • Bad discharge in scrap tray by air nozzle • Separating screw for vial diam. 24 mm, height 40 mm • Counter, control for feeding rotary table (rotary table not attached) • PLC Siemens S5-95U • Electr. connection 400V/50Hz This machine is offered at a special price and sold as-is without technical inspection.

Marelli Motori AC Generator M7B 315 LD 4 AC synchronous generator from 1995 with 1,360 operating hours. 1 available 400 V/50 Hz – 575 KVA Manufacturer: MarelliMotori Model: M7B 315 LD 4 Type: AC Synchronous Generator Serial Number: MB5883 Power [KVA]: 575 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 830 Speed [1/min]: 1,500 Year of Make: 1995 Hours: 1360 Dimensions LxWxH [cm]: 1.40 x 0.90 x 1.20 Weight [kg]: 1.346

Permanent Magnet Brushless Servo Motor SIEMENS with ALPHA Spur GearServo Drive, Gear Motor, Servo GearType:1FT6105-8SF71-3EG1Series No. YF P921 8717 03 001Year of Manufacture: 2002Nominal Torque = MO: 54/65 NmNominal Current = Io: 36/45 ADreh Number = n. max.: 4500 rpmSpur Gear ALPHATyp: SP 210-MF2-20 -021-000Shaft Diameter 75 mmStump Shaft Length 105 mmCentering Diameter 180 mmCentering Diameter 35 mmBolt Circle Diameter 250 mm / 4 x 17 mm BoresHousing Dimension L/W/H 725 x 225 x

Turning table, 180 rest table, rotary table with aluminium topPositioning table, rotary table, round dividing table 180Assembly table, swivel tableTurntable: 1080 mmOverall height to top edge turntable: 630 mm- Turntable made of 25.5 mm thick aluminium plate with various holes- very stable turntable, can be rotated by hand- 2 pieces index locking positions 180, manually via foot lever for de-latching- stop damper under the turntable for the locking positions- very stable steel substructure- flange plate steel substructure L x W x H = 600 x 600 x 20 mmSpace requirement

Long-cutting saw for cutting aluminium profiles with feed pusher in very good condition Max. cutting length: 700 mm Max. cutting height: 130 mm Max. saw blade diameter: 450 mm Feed length of the material pusher maximum 6,200 mm System is dismantled in our warehouse Further technical data on request

I sell this device.I don't know my way around, someone can tell me what the thing does and who can use something like that? I have put pictures of the nameplates with the performance data I would be happy if someone gets in touch Maybe someone can use the engine

Saw blade diameter: 300 mm Manual material tensioner Minimum quantity spraying device 120 kg

Lippert roller conveyor Roller conveyor Alignment conveyor 2000-700-600 RA2250 Make: Lippert Roller width (RB): 600 mm Nominal width/outer width (NB): 700 mm Length: 2000 mm Roller diameter: 50 mm Distance between rollers: 76 mm Drive motor: SEW geared motor Electrical data: 380 V, 0.37 kW Frame height: 105 mm including motor: 400 mm Conveyor speed: please contact us Optionally available: Supports Side guides Frequency converter for stepless speed control Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: nominal voltage: 380-480 V condition: good (used) Conveying length in mm: 2000 Nominal / outside width in mm: 700 Roll width in mm: 600 Roll division in mm: 76 Driven: YES Engine type: SEW Eurodrive KW: 0,37/S1 Conveyor speed m / s: bitte Kontaktieren scope of delivery: without supports and side guides For individual, expert advice, s ...

Transnorm right flush roller conveyor 3470-1830-1450 RA1855 Make: Transnorm Basic dimensions: conical structure, 3470x1160-1830 mm Length: 3470 mm Nominal/external width (NB): 1160-1830 mm Roll length (RB): 160-450 mm & 640-1000 mm Frame height: 290 mm Currently set height: 640 mm Height of side guide: 410 mm Width (height) side belt 300 mm Roller diameter: 50 mm Roller pitch: 65 mm Including 8 feet Motor MOVI-Mot 3x300-500V 1,5kW Conveying speed: Features: Construction year: 2017 Conveying length in mm (NL): 3470 Optional erhältlich: Frequenzumrichter Electric data: 70Hz, 217 / 375 V Antrieb: Nord-Drivesystem Supports: 8 Bauhöhe in mm (BH): 290 Belt width in mm (GuB): 300 Height in mm: 640 Galvanized rollers: Ø = 50 mm scope of delivery: including supports and side guides, Kabel, ohne Frequenzumrichter Roll width in mm: 160-450, 640-1000 condition: Ausstellungsstück Roll division i ...

1.200 litre, Stock number: T3996, Litre: 1.200, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 3 pcs. legs, Top: Conical, Bottom: Conical, Tank cover: In the top, Ø 450 mm., Agitator: Yes, Agitator type: 2-bladet propel, D 550 mm., Motor: 1,1 kW - 220/380 Volt - 43 rpm., Inner diameter: Ø 1200 mm., Total height: 2000 mm., Manufacturer: Alfa Laval , Model/type: TV1000

saw blade diameter: 350 x 32 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 105 mm capacity 90 degrees: flat: 180 x 70 mm capacity 45 degrees: round: 120 mm links capacity 45 degrees: round: 110 mm rechts capacity 45 degrees: square: 100 mm links capacity 45 degrees: square: 95 mm rechts capacity 45 degrees: flat: 135 x 60 mm dimensions of saw-blade: 350 x 32 turning speeds: 1700 / 3400 U/min capacity 45 degrees: round: 120 mm total power requirement: 1,5 / 2,2 kW weight of the machine ca.: 210 kg dimensions of the machine ca.: 1170 x 860 x 1600 mm Description: manual high-performance circular saw for cuts from 45 ° right to 45 ° left in aluminum and lightweight metal alloys, with 2 speeds Furnishing: - with pneumatic vices - The saw head can be tilted by 45 ° on one side - Heavy cast iron construction - ensures vibration-free operation and maximum precision - The  ...

The Alfa Laval 518 separator is a type of centrifugal separator designed to separate liquids and solids based on their density. The height adjusting ring is an important component of this separator that plays a crucial role in the adjusting and controlling of the separation process., Key Features of the Height Adjusting Ring:, - Function: The ring allows for adjustments in the height of the separators bowl. This can impact the sedimentation rate and the efficiency of the separation process., - Applications: Used mainly in food processing, beverage production, and chemical industries for clarifying liquids or separating solids from liquids., - Material: Typically made from durable materials that can withstand the operational conditions of the separator, including corrosion resistance., - Installation and Adjustment: Proper installation and adjustment of the height adjusting ring are essen ...

Max. saw blade diameter: 250 mm Manual material tensioner Saw blade lubrication

Max. saw blade diameter: 550 mm Hydropneumatic saw blade feed via 2 hand control Pneumatic material tensioners Minimum quantity spraying device Table can be rotated on both sides with detent points at 45° Roller conveyor and stops on request

saw blade diameter: 350 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 110 mm capacity 90 degrees: flat: 200x88 mm capacity 45 degrees: round: 115 mm capacity 45 degrees: square: 110 mm capacity 45 degrees: square: 150x80 mm total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,59 t dimensions: 1,9 x 1,4 x 1,8 m Fully automatic hydropneumatic machine · Left/right miter cuts · Head bevel cuts up to 45° (shifter) · Material feed unit with material clamp · Integrated coolant spray system · MPS control: · Saves cut start/end times · Displays power consumption, workpiece count, cutting time, etc. · Adjustable water cooling · Cutting pressure regulator The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Max. saw blade diameter: 400 mm Pneumatic material tensioner Manual feed

Max. saw blade diameter: 500 mm Cutting area up to 80x 200 mm Feed length: max. 800 mm with digital display Saw blade speed: 2 rpm Unit counter with automatic shutdown when setpoint is reached Infinitely adjustable pneumatic material feed Hydropneumatic saw feed Pneumatic material tensioners Spraying device Instruction manual included Machine dimensions: 2100 x 1100 x 1500 mm (WxDxH) 1000 kg

TGW alignment conveyor inclined roller conveyor 1750-475-420 RA2406 Make: TGW Year of manufacture: 2012 Roller width (RB): 420 mm Nominal/outer width (NB): 475 mm Length: 1750 mm Diameter rollers: 50 mm Distance between rollers: 60 mm Roller conveyor motor: SEW drive motor frame height: 130 mm Conveyor speed: contact us Angle rollers: ca. 5° Optional: supports Side guide adapted conveyor speed range with frequency converter Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 2012 condition: gut nominal voltage: 380-500V angle: ca.5° Conveying length in mm: 1750 Nominal / outside width in mm: 475 Roll width in mm: 420 Roll division in mm: 60 Driven: YES Engine type: SEW Eurodrive Conveyor speed m / s: bitte Kontaktieren scope of delivery: ohne Frequenzumrichter, without supports and side guides For individual, expert advice, simpl ...

Max. saw blade diameter: 350 mm Manual material tensioner

This is a LITTLE GEM glass bottle filler for 1 Pint milk bottles round format. The machine cuts and applies with heat sealing the aluminium cap that is done via a fords cutter and capper. This machine can do 1pint and 2 pints. The machine has been running until 2025 and can be sold either as is working condition or fully refurbished . The machine is driven by 1 single motor that is located at the bottom of the machine turning two gears one opposite to the other making this a very robust and easy to maintain system., Capacity: 2000 bottles per hour , Aluminium Cutting: Fords systems , Format: 1 Pint Milk Bottles , Sealing Device: Included , Construction: Fully Stainless steel on product connection Parts , Filling Type: Mechanical valves that the bottles lifts the rubbers up and the milk flows through, one the mechanical vacuum is activated this helps to avoid over, Collection Table: Inclu ...

2 pieces of rotating bezels for TRENS SUI 80

Marelli MJH 630 MA4 4 B20 3000kva / 13.800volt 60hz 2800kva / 10.500volt 50hz Year 2022 (new and unused) located in our warehouse in NL: Kranenpool 10 6443VA Brunssum

• For aluminium tubes (double seam, triple seam) • 10 tube holder stations • Output 25 - 60 tubes/min • For tube diam. 11-52 mm depending on tube holder format set • Tube sheath length 50-250 mm • Total tube length with cap max. 280 mm • Dosing 2.0-400 ml depending on dosing pump • 2 rotary valve dosing pumps, 2-30 ml + 50-150 ml • 2 cam discs • 2 filling nozzles, diam. 12 + 19 mm with anti-drip device • Tube feeding magazine • Tube centring station • Print mark control (alignment of the tube to the print image) • Under-level filling • 1-line embossing, with embossing numbers • 1 heated hopper with electric heating, 1 single-walled hopper • 2 tube holder format sets for aluminium tubes (diam. x total length) 16.0 x 100 mm + 25.0 x 163 mm • Contactor control • Connection 400V/50Hz • Without transfer belt to the cartoning machine • Has worked in lin ...

A Mitutoyo height measuring device including granite plate is available. Granite plate dimensions X/Y/Z: 1000mm/630mm/100mm, max. plate load: 300kg, plate weight: approx. 190kg, measuring range: 630mm, resolution: 0.001mm, min. repeatability: 1.8µm. Machine dimensions X/Y/Z: approx. 300mm/300mm/1050mm, weight: approx. 30kg. Documentation available. An on-site inspection is possible.

saw blade diameter: 450 mm capacity 90 degrees: round: 130 mm capacity 45 degrees: round: 100 mm capacity 90 degrees: flat: 210 x 170 mm capacity 45 degrees: square: 145 x 170 mm turning speeds: 2900 U/min total power requirement: 2,3 kW weight of the machine ca.: 600 Kg dimensions: 4,0 x 1,5 x 1,5 m Underfloor aluminum circular saw - Hydropneumatic semi-automatic machine - Pneumatic workpiece clamping device - Roller conveyor with material stop, length 3m - Feed roller conveyor, length 3m Machine color is blue The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 420 mm capacity 90 degrees: round: 130 mm capacity 90 degrees: flat: 160 x 100 mm capacity 45 degrees: round: 110 mm capacity 45 degrees: square: 130 x 80 mm turning speeds: 3000 U/min engine output: 2,0 kW total power requirement: 2,0 kW weight of the machine ca.: 190 Kg dimensions: 3,0 x 1,0 x 1,3 m Underfloor aluminum circular saw - Hydropneumatic semi-automatic - pneum. Workpiece clamping device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Max. saw blade diameter: 350 mm Pneumatic material tensioners Table can be rotated left and right Manual feed

Total Weight: 2,800 kg Output Current: 288 A Output Voltage: 400 V Output Frequency: 50 Hz Rated Power: 160 kW (217.54 hp) Rated (full) power: 160 kVA Constant Power: 160 kW (217.54 hp) Maximum speed: 1,500 rpm

JGS 616 GS-N.L

Stock number: F742, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Alu seal welder, Construction: 4 holes circular table model - Semi-automatic, Motor: 600 W heating coil - 220 Volt, Manufacturer: Trepko, Other: Ellipse tooling, L 115 x W 72 mm.

Max. saw blade diameter: 550 mm Manual swivel with digital display Motor-controlled axis for tilting the saw blade with digital display and speed adjustment via potentiometer Stepless saw blade feed Minimum quantity spraying device Weight: approx. 1,000 kg

saw blade diameter: 350 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 110 mm capacity 90 degrees: flat: 200x88 mm capacity 45 degrees: round: 115 mm capacity 45 degrees: square: 110 mm capacity 45 degrees: square: 150x80 mm total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,59 t dimensions: 1,9 x 1,4 x 1,8 m Hydropneumatic Fully Automatic • Mitering Left/Right • Bevel cuts up to 45° (shifter) a. b. • Pneumatic double clamping device • Pneumatic vertical clamping device • Integrated coolant spray system MPS control: • Save cutting start/end position • Display of power consumption, piece count, cutting time, etc. • Adjustable water cooling • Cutting pressure regulator The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- Oscillating screen with 2 independent screening floors for sorting wood chips and shavings. - Equipped with interchangeable meshes, designed for the classification of fine chips used in the outer layers of chipboard, equipped with 10x10 mm - 2.20 - 2.28 - 0.21 meshes. - Operating conditions of this machine: unchecked. - EX WORKS Sale. Dismantling, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-43986-12

saw blade diameter: 350 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 110 mm capacity 90 degrees: flat: 200x88 mm capacity 45 degrees: round: 115 mm capacity 45 degrees: square: 110 mm capacity 45 degrees: square: 150x80 mm total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,27 t dimensions: 1,1 x 0,95 x 1,7 m - Hydropneumatic semi-automatic - Miter left/right 45° - head diagonal cuts up to 45° (shifter) - Ball bearing table - pneumatic. Double clamping device - Machine base with fog spray device - Chip extraction socket on the saw blade protective hood The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stamford AC Generator PE734C2 Electricity generator unknown year of construction with approx. 63,000 operating hours, 415 volts V/50 Hz. Manufacturer: Stamford Model No.: PE734C2 Type: AC Synchronous Generator Serial Number: A12K489419 Power [KVA]: 1,445 Voltage [V]: 415 Frequency [Hz]: 50 Current [A]: 2.010 Speed [1/min]: 1,500 Year of manufacture: unknown Operating hours [h]: approx. 63,000 Weight [kg]: 3,000 Dimensions LxWxH [cm]: 190 x 95 x 135

 Alu perforated baking trays 2 edge NEWAlu perforated trays 2 rim 580 mm x 780 mmPerforated tray 2 rim short  , rim height 10 mm , 45 degreesRound perforation 3.0 mmNominal material thickness 1.5 mmNEWDedetails see picture

 Aluminium perforated baking trays 3 rim NEW(10 pcs) Aluminium perforated trays 3 rim 580 mm x 780 mmPerforated tray 3 rim  , rim height 23 mmRound perforation 3.0 mmMaterial thickness 1.5 mmNEWDedetails see picture

 Aluminium Perforated Sheets 3 Rand NEW(10 pcs) Aluminium Perforated Sheets 3 Rand 600 mm x 400 mmPerforated Sheet 3 Rand  , Edge Height 23 mmRound Perforation 3.0 mmMaterial Thickness 1.5 mmNEWDedetails see picture

Miter saw, aluminum circular saw, aluminum semi-automatic circular saw, miter saw, glass bead saw -Processing of: flat, angle and solid material, pipes and special profiles -Saw blade: Ø 400 mm -Saw blade: swiveling -Drive: 2.5 kW -Speed: 2800 rpm -pneumatic material tension -pneumatic feed -with: chip extraction -Dimensions: 1100/900/H1160 mm -Weight: 238 kg

Container rotating device, welding rotating device, roller stand, rotators, pipe straightening system -Pipe straightening system for: steel pipes, with flame and water cooling Flame straightening -Drainage channel and water pump -Roller diameter: Ø 180 mm -Drive: PIV gearbox -electrically adjustable -Load capacity: 1 ton -Speed: min. 50 mm/min -Speed: max. 150 mm/min -Manual switch -Counter bearing: laterally adjustable -Drive dimensions: 3600/820/H850 mm -Dimensions of counter bearing: 2950/820/H850 mm -Empty weight: 1300 kg

standard cooler, car cooler, oil cooler, heat exchanger, hydraulic oil cooler, engine cooler, water cooler, standard cooler -Manufacturer: Nissens, cooler aluminum housing -Type: unfortunately no type designation -Number: 2x coolers available -Price: per piece -Dimensions: 675/110/H285 mm / 700/110/H290 mm -Weight: 7.5 kg / 7.7 kg

Aluminum crosscut saw, aluminum circular saw, aluminum semi-automatic circular saw, crosscut saw, glazing bead saw, metal crosscut saw, crosscut and miter saw, aluminum metal circular saw, light metal circular saw -Manufacturer: Berg & Schmidt, aluminum metal circular saw Velox 350 with solid base frame -Saw blade: Ø 350 mm / 1400/2800 rpm -Cutting height: 100 mm -Cutting width: 170 mm -Double miter: 45° -Drive: 1.3 / 1.7 kW -Double clamping device: pneumatic -Dimensions: 890/600/H1670 mm -Weight: 198 kg

conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor, flat belt conveyor -Manufacturer: MK Maschinenbau Kitz, belt conveyor on mobile base frame, height adjustable -Type: GUF-P 2000 AF 2900/600 -Speed: 13 m/min -Belt width: 590 mm -Conveyor length: 2900 mm -Drive: SEW-Eurodrive 0.12 kW, see photo nameplate -Case: VA -Transport dimensions: 2940/730/H1710 mm -Weight: 115 kg

Max. saw blade diameter: 280 mm Pneumatic material tensioners Swivel table with detent points Minimum quantity spraying device

suitable for e.g. Alfen S-Line Auction-ID: A1-44832-807

Allimex Allislide Mid Clamp 6 boxes with 100 pieces Auction-ID: A1-44832-63

End clamp Allimex Allislide 2 boxes with 100 pieces Auction-ID: A1-44832-57

Flat roof mounting kit for 72 panels (12 rows of 6) Consisting of: Supports, End clamps, Intermediate clamps, Bolts, Ballast holders and sheet metal screws (see photos). You must determine / calculate the required amount of ballast yourself, this is not included. Auction-ID: A1-44832-50

Allimex Allislide Mid Clamp 1 pallet with 24 boxes of 500 pieces Auction-ID: A1-44832-67