al used for sale

Cooling: air-cooled Control: Hot Gas Valve Control: Digital display Condensate separation: lossless, Level-controlled steam trap Performance data Nominal capacity at pressure dew point +3°C 0.6 m³/min Max. operating pressure 16 bar Total energy consumption (25°C input temperature) 0.16 kW Refrigerant R513A 0.17 kg Installation data Ambient conditions min. / max. 5 / 43 °C Pressure drop at full load 0.25 bar Voltage / Frequency 230 / 50 V / Hz Dimensions and weight Length x width x height 350 x 493 x 450 mm Weight 19 kg Compressed air connection G 3/4 "ag

Galvanized compressed air tank Material: Hot-dip galvanized steel Version: upright Fittings: Safety valve, pressure gauge, Ball valve, test valve Installation data Capacity compressed air tank 270 lt Permissible operating pressure max. 11 bar Operating temperature min. / max. -10 / +80 °C Blow-off capacity safety valve 7.24 m³/min Dimensions and weight Diameter 500 mm Height incl. feet 1685 mm Weight approx. 66 kg Compressed air connection 4 x 3/4 "

Steam traps without pressure losses! In the production of of compressed air, water always falls into the form of of condensate. If this condensate is not reliably separated, the condensate can in the compressed air network and damage to the consumers. Performance data Application for compressors up to 6.3 m³/min Application for filters up to 63 m³/min Operating pressure min. / max. 0.2 / 16 bar Capacity discharge 3 l/h Installation data Operating voltage (without el. Connection cable) 230 V Power consumption 10 W IP65 protection class Dimensions and weight Length x width x height 160 x 69 x 116 mm Connection Admission 1/2" Connection outlet 1 x Ø 12 Weight approx. 0.9 kg

Spindle bore: 42 mm Circumferential diameter over bed: 330 mm Multifix holder Tailstock with an MK3 lining Speed: 1-4500 1/min

Sliding table saw Altendorf Type: F 90 Machine No. 81-12-195 Built in 1981 Sliding carriage length 2500 mm Motor power 4 kW Extraction hood from above Table extension and Table extension Cutting width to the right of the saw blade 800 mm max. saw blade diameter without splitting wedge 500 mm Cutting height maximum 165 mm Maximum saw blade diameter with splitting wedge 400 mm Saw blade speeds 3000/4000/5000/6000 rpm. Information on the cutting height for saw blade diameter Saw blade diameter 250 mm Cutting height 0 - 55 mm Saw blade diameter 300 mm Cutting height 0 - 80 mm Saw blade diameter 350 mm Cutting height 25 - 105 mm Saw blade diameter 400 mm Cutting height 50 - 130 mm Saw blade bore 30 mm Saw blade cannot be swivelled Extraction connection diameter 120 mm + 80 mm Weight approx. 800 kg with pallet

bore capacity in steel St 60: 25 mm Drilling capacity in St 60: 30 mm threading in St 60: M 16 : M 20 Short spindle: MK 3 spindle stroke: 140 mm throat: 293 mm column diameter: 115 mm Machine table - usable table surface: 514x360 mm T-Slots Amount - Width - Distance: 2x14x224 mm distance spindle - column min./max.: 132/724 mm feed: von Hand 0: stufenlos Spindle Speed: 225-4300 U/min. engine: 1,0/1,6 kW voltage: 400 V Standard equipment: - 7 TFT LCD display with touch function: Manual input of spindle speed set value Actual speed display Integrated drilling depth display with touch zero point transfer Virtual drilling depth scale in the display Machine status indicators and warnings on the display Service information Selectable operating language: DE/EN/FR/ES/IT/NL/RU - Thread cutting device, for thread cutting with stop, max. 6 threads/min (thread cutting capacity depending on spi ...

Offer 25442 Technical data: - Steel - Stainless steel - Aluminium - Plastic - Machining - Deburring and faceting process is carried out with a milling cutter - Face cutter head with indexable inserts - Motorized feed module - Material thickness up to 100 mm - Facet angle adjustment 25 / 50 + 30 / 60 ° - Bevel width adjustable up to 20 mm - Speed infinitely variable 2000 - 6000 rpm - Feed rate infinitely adjustable - Table size 750 x 400 mm - Drive 400 V / 5.2 kW - Space requirement approx. W 800 x D 1500 x H 1700 mm - Weight approx. 500 kg

Turning diameter over bed/face slide: 560mm/370mm, turning length: 2000mm, spindle bore: 90mm, speed: 1800rpm, dimensions X/Y/Z: approx. 3800mm/1700mm/2100mm, weight: approx. 3300kg, control: Bosch CNC Alpha 2000/2, operating hours: 60000. Including various holders, 3- and 4-jaw chucks.

Series B, 132kW, 232A. S/N 12082007

Series A, 22C-D038A103, 18,5kW, 40A

Offer 25032 Technical data: - Drilling capacity in steel ST 60 50 mm - Drilling capacity in steel ST 60 65 mm - Tapping device up to M 60 - Drilling spindle holder MK 5 - Drilling spindle stroke 240 mm - Projection 400 mm - Table with 2 T-slots 720 x 560 mm - max distance table – drilling spindle approx. 850 mm - 4 feeds 0.1 - 0.2 - 0.3 - 0.4 mm/rev - AZ continuously variable transmission with manual transmission - Drilling spindle speeds infinitely adjustable 40 - 1600 rpm - Drive 400 V / 5.5 kW - Space requirement approx. W 850 x H 2480 x D 1350 mm - Weight approx. 1450 kg

General SKU364X867 LocationBarneveld CEcheck MakeHosokawa Alpine Main Features Motor18.5 KW Inlet diameter150 mm Width165 mm Specified Features - Hammer Mill Hammer millcheck Grinding room sizeø 300 mm Moving hammers24 Hammer width12 pieces 40 mm and 12 pieces 60 mm With sieve cagecheck Housing dimensions ø 300 mm Inletø 150 mm Motor18,5 kW (400 V, 2955 rpm) Speed6900 rpm Hammer Mills MaterialStainless steel Information TypeMP2-W No.P1 187094 /4050 Year of construction2013 Mounted on framecheck Floor space2,50 x 0,95 m Total height0,80 m Weight550 kg Extra SpecificationsWith: dust filter AZO blower: density 1.17 kg/m³: 45 m³/min: speed: 3000 rpm hopper with gear motor: 0.2 kW, 2730 rpm Hammer MillsNew arrivalsHosokawa AlpineMills > Hammer MillsNew arrivalsBrand > Hosokawa Alpine What you can expect from Foeth: -- Machine is in working condition -- At ...

General SKU364X863 LocationBarneveld CEcheck MakeHosokawa Alpine Main Features Motor37 KW Inlet diameter150 mm Specified Features - Fine Impact Mill MaterialStainless steel 1.4541 (321) Fine Impact Mills Grindercheck With sieve cagecheck Housing dimensions ø 1000 mm With hoppercheck (for a milled product) Inletø 150 mm Motor37 kW (400 V, 2960 rpm) With variable speed drivecheck Speed820—4100 rpm Information Type500 UPZ No.P1 187094 Year of construction2011 Mounted on framecheck With switchcheck (as is) With control cabinetcheck (as is) Floor space1,35 x 0,95 m Total height1,0 m Weight960 kg Extra SpecificationsWith: dust filter blower: density 1.17 kg/m³: 45 m³/min: speed: 3000 rpm hopper with gear motor: 0.2 kW, 2730 rpm For the UPZ 500 we have the following additional items on stock AZO Coolable screw conveyor — SKU: 364X866 DMN Machinefabriek ...

General SKU298W568 LocationBarneveld Pressure Working pressure2 Bar Vacuum possiblecheck Working pressure jacket2.5 Bar Main Features MaterialStainless steel Volume960 Ltr. Surface8 m2 Specified Features - Tray dryer Tray dryercheck Stainless steel housingcheck Stainless steel trayscheck Heating surface8 m2 Drying chamber capacity960 l Drying chamber sizes1000 x 1000 x1000 mm Max. temperature120°C With jacketcheck Max. temperature120°C Number of trays8 Tray sizes1000x1000x20 mm Distance between the trays90 mm With 1 doorcheck Connection for the vacuum pumpcheck Without vacuum pumpcheck MaterialStainless steel 1.4301 (304) Information MakeAlb. Klein Machine number510173 Year of construction1990 Floorspace1,40 x 1,70 m Total height2,0 m Weight1650 kg Extra SpecificationsWith 3 trolley’s with trays, dim. Tray 420x880 mm : Technical specs Extra info ...

General SKU428X1339 LocationBarneveld CEcheck MakeAllgaier TypeWS-CT-L-020 Main Features MaterialStainless steel Volume50 Ltr. Motor2.6 KW Specified Features - Fluid bed dryer batch Fluidbeddryercheck With pancheck 3x Capacity50 l. Pan sizesø 400 x 400 mm With electric heatingcheck With fancheck Motor2,60 kW (400 V, 2860 rpm) With dust filtercheck MaterialStainless steel 1.4306 (304L) Information No.204 Year of construction2000 Mounted on wheelscheck With switchcheck Floorspace1,85 x 1,20 m Total height2,00 m Weight800 kgFluid bed dryers batchAllgaierDryers > Fluid bed dryers batchBrand > Allgaier What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many ...

General SKU363X853 MakeHosokawa Alpine LocationBarneveld CEcheck TypePulvis PV450 Main Features MaterialStainless steel Volume25 Ltr. Motor11 KW Specified Features - Ball mill MaterialStainless steel 1.4301 (304) Ball mills Grindercheck (Agitated ball mill (dry grinding)) Continuous ball millcheck Capacity25 l Drum sizesø 485 mm InletDN100 OutletDN100 With jacketcheck Motor11 kW Speed300 rpm With ballscheck Capacity25 l. Housing dimensions ø 485 mm InletDN100 With jacketcheck Motor11 kW Rotor speed300 rpm With ballscheck Information No.M3 239783 Year of construction2016 Mounted on framecheck With switchgearcheck (as is) Extra SpecificationsHosokawa Alpine Pulvis PV450 with Hosokawa Alpine ATP 140Dry agitated media mill for the production of ultrafine powders. The dry agitated bead mill is equipped with an integrated dynamic air classifier. Capacity:  ...

General SKULT016 LocationSpain CEcheck Main Features MaterialStainless steel Motor15 KW Specified Features - Decanter Decantercheck 3-Phase decantercheck Screw diameter280 mm Screw length1260 mm Motor15 kW Max. rotor speed4400 rpm MaterialStainless steel Information MakeAlfa Laval TypeAvocado oil line - 3 phase Extra Specificationswith: - 3x termo-blender Alfa Laval :ATMOSPHERA® Round Malaxer, 650 Ltr. each. - :Centrifugal Separator, Alfa Laval UVPX 507, throughhput capacity: 2,7 m³/h, feed temp.: max 100 °C, operating liquid density: max. 110 kg/m³, discharge volume: 7,5 Ltr., motor: 5,5 kW - Reception and washer, 1500 kg per hour - Stoner, pulper, 1500 kg of raw fruits, 1000 kg of pulp in exit - 2x :Screw pump, 1,5KW with speed variator - 2x :Screw conveyor, 5 m long, 2,2 kW - Tank for decantation 200 Ltr. - Tank for finished oil 60 Ltr. - :Thermal unit to h ...

General SKU308T739 MakeAllgaier Werke LocationBarneveld CEcheck TypeWS-GT-0,75 Main Features MaterialStainless steel Surface0.44 m2 Specified Features - Fluid bed dryer continuous Continuous fluidbed dryercheck Surfaceapprox 0,44 m2 With fancheck With dust filtercheck Heating unit (steam)check Max. temperature300 °C MaterialStainless steel, Stainless steel 1.4301 (304) Information No.280 Year of construction2004 With switchgearcheck (as is) Extra SpecificationsFluidized Bed Spray Granulators from Allgaier can be used to produce solid and dust-free granules from liquid starting materials such as suspensions and solutions. The remaining dust and powders can be further processed into easily soluble instant products. The machine is particularly suitable for processing urea granules, yeast, gelatin granules, and water jars. Functionality:During granulation, the solids-c ...

General SKU343T928 MakeAlexanderwerk LocationBarneveld CEcheck TypeG 1/100 Main Features Motor4 KW Specified Features - Roll compactor MaterialStainless steel 1.4401 (316) Roll compactors Granulatorcheck Roll sizesdia. 190x170 mm Number of dies available:1 Die perforation2 mm Number of press rolls1 Motor4,0 kW 230/400 Volt (Ex) With pre-mixercheck With motor0,37 kW With variable speed drive4,2-21 RPM Inlet440x380 mm Outletdia. 100 mm Information No.05132198 Year of construction2001 Mounted on framecheck With switchgearcheck Floorspace1,2x1,2 m Total height2,2 m Weight820 kg ATEX compatiblecheckRoll compactorsAlexanderwerkCompactors > Roll compactorsBrand > Alexanderwerk What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the  ...

General SKU210T078 LocationBarneveld MakeAlfa Laval Main Features MaterialStainless steel Motor30 KW Specified Features - Decanter Decantercheck InletDN80 Liquid outletDN150 Solids outlet500x300 mm Motor30 kW 400/690 Volt Hydraulic drivecheck With hydraulic unitcheck Motor0,22 kW 220-240/380-415 Volt Max. rotor speed3150 rpm MaterialStainless steel Information TypeSharples NX A4230 No.A91-115381 A Mounted on framecheck Floorspace2,9x1,9 m Total height2,9 m Weight2700 kgDecantersAlfa LavalCentrifuges > DecantersBrand > Alfa Laval What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Drilling Ø in St 60/GG 20: 28/32 mm Spindle holder: MK 3 Projection: 250 mm Spindle stroke: 120 mm Table size: 400 x 415 mm Largest distance between table and drilling quill: 665 mm Spindle speeds: 140 - 2000 rpm Drive motor: 380 V, 1.1/1.3 kW Weight: 210 kg Dimensions: 800 x 420/600 x 1790 mm

used inverter Altivar 61 with 132 kW (200 HP) power installed with power contactor, fuses, current transformer, etc. and control panel in the control cabinet door in a RITTAL enclosure

ALTAY V6 Type: Diesel Engine. Configuration: V-shaped, 6-cylinder. There are also other engines from tractors and trucks of Soviet production

Unused alubit grinding balls (alumina ceramic) designed for wet grinding (continuous operation), available in the following sizes and quantities: 1 1/4'' (32 mm) [1,000 kg]; 1 1/2'' (38 mm) [990 kg]; 2'' (50 mm) [700 kg]; 1 3/4'' (45 mm) [940 kg]; 2 1/2'' (64 mm) [1,970 kg]. All balls made in Italy, packed in 25 kg bags.

Unused alubit grinding balls (alumina ceramic) designed for dry grinding (batch and continuous operation), available in the following sizes and quantities: 1 1/4'' (32 mm) [960 kg]; 1 3/4'' (45 mm) [1,580 kg]; 1 1/2'' (38 mm) [940 kg]; 2'' (50 mm) [410 kg]; 2 1/2'' (64 mm) [580 kg]. All balls made in Italy, packed in 25 kg bags.

General SKU286M326 MakeALPINE A.G./ Henco & Co. TypeATP200 / 4ATP No.unknown, manufacturer tag is missing Year of construction+/- 2006 Mounted on framecheck Main Features Motor7.5 KW Inlet diameter200 mm Specified Features - Classifier mill MaterialCeramic, Mild steel Classifier Mills GrinderMulti-wheel air classifier Mill Solid cone rotor4x classifierwheel ceramic Rotor size4x dia. 200mm, fine 5µ - 120µ Motor7,5 kW, 400/690Volt, 2900rpm Speed6000rpm Information LocationBarneveld Floorspace2,1x2,1 m Total height4,0 m Weight3900 kgClassifier millsHosokawa AlpineMills > Classifier millsBrand > Hosokawa Alpine What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld fo ...

Almab automation with bundling and stacking, Automation for planing line 120 m/min with de-stacking and infeed system, outfeed with bundling and automatic stacking system, Consisting of:, - Infeed with tilt hoist, - Unscrambler, - Automatic infeed system, - Outfeed with buffer conveyor, - Semi-automatic bundle, - Mosca strapping machine, - Stacking system, - Outfeed for wood packages

General SKU238S138 MakeAllgaier Werke GmbH & Co KG (D) TypeWS-CA-S-T-0.40 L No.214 Year of construction2000 LocationBarneveld Main Features MaterialStainless steel Volume71 Ltr. Specified Features - Fluid bed dryer batch Fluidbeddryercheck Granulatorcheck With pan mounted on wheelscheck(2x) Capacity71 Ltr. Pan sizesdia. 650x650 mm With sprayercheck With Wurster-pancheck With electric heatingcheck MaterialStainless steel 1.4301 (304) Information With switchas is Floorspace2x1,5 m Total height3,5 m Weight1350 kg CEcheck Extra Specificationswith: - blowers - explosion protection valves : - heaters Fluid bed dryers batchAllgaierDryers > Fluid bed dryers batchBrand > Allgaier What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the ma ...

Horizontal turning machine manufactured in 2012. This SOMAB ALPHAMAB 336 EP2200 features a maximum turning diameter of 800 mm and a distance between centers of 2200 mm. It includes a 12-station automatic turret and a spindle speed of 0–2100 rpm. If you are looking to get high-quality turning capabilities, consider the SOMAB ALPHAMAB 336 EP2200 machine we have for sale. Contact us for further details.

General SKU356S851 LocationBarneveld MakeALBI Alois Binderberger No.1361 Pressure Working pressure3.2 Bar Vacuum possiblecheck Number of horizontal pressure tanks1 Main Features MaterialStainless steel Volume530 Ltr. Pressure3.2 Bar Vacuumcheck Specified Features - Pressure vessel Notified body(TÜV) Capacity530 Ltr. Vessel sizesdia. 700x1900 mm Dished bottomcheck Dished frontscheck Top connectionsDN25/33,7. dia. 56 mm, dia.160 mm Outletdia. 70 mm Max. temperature0/160 Degr. C With jacketcheck MaterialStainless steel Information Year of construction1996 Mounted on legscheck Floorspace2,2x1 M Total height1,5 M Weight300 KgPressure vesselsAlbi Alois BinderbergerTanks > Pressure vesselsBrand > Albi Alois Binderberger What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination ...

Circular Metal Saw manufactured in 2007. This FomIndustrie Blitz Alva 450/500 ABC features a blade diameter of 450 mm, allowing for precise miter cuts. With a tool speed of 2800 RPM, it is designed for high-speed cutting across various materials. The robust construction ensures stability and longevity, making it ideal for heavy-duty industrial environments. Consider the opportunity to buy this FomIndustrie Blitz Alva 450/500 ABC Circular Metal Saw. Contact us for further details.

This 5-axis FANUC ROBOCUT alpha C800iB was manufactured in 2016, featuring a large work area with X-axis travel of 800 mm, Y-axis travel of 600 mm, and Z-axis travel of 310 mm. It supports a maximum workpiece weight of 3000 kg and utilizes a CNC control FANUC 31i-WB for precise operations. If you are looking to get high-quality wire EDM capabilities, consider the FANUC ROBOCUT alpha C800iB machine we have for sale. Contact us for more information.

General SKU104X554 MakeAlpine TypeK-15L No.368 Year of construction1985 Mounted on framecheck Manually operated pan lifting Main Features MaterialStainless steel Volume15 Ltr. Motor0.55 KW Specified Features - Ribbon blender Ribbon blenderTruncated cone mixer (1x) Capacity15 Ltr Trough sizesdia. 345x280 mm With covercheck Motor0,55 KW, 220/380 Volt, 1405 rpm With variable speed drivecheck Speed mixing shaft22-130 Rpm MaterialStainless steel Information LocationBarneveld With switchcheck Floor space1,7x0,6 M Total height1,6 M Weight120 KGRibbon blendersAlpineMixers > Ribbon blendersBrand > Alpine What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more ...

This Arburg Allrounder 420C 1000-290 was manufactured in 2014. It features a clamping force of 1000 kN, an opening stroke of 500 mm, and a platen size of 570x570 mm. Max shot weight is 132 g. Consider the opportunity to buy this Arburg Allrounder 420C 1000-290 hydraulic injection moulding machine. Contact us for more information.

General SKUR1227 LocationBarneveld MakeAlpine Augsburg (D) Main Features Inlet diameter710 mm Specified Features - Pin Mill Pin disc millcheck 2 Driven rotorscheck Rotor sizedia 710mm Number of pins on house side:186 Number of pins on door side:278 Pin diameter10mm Inlet120x400mm Feeding with rotating valvecheck Pin Mills MaterialMild steel Information Type710-CW Year of constructionunknown, manufacturer plate is missing Floorspace2,3x2,2 M Total height2,3 M Weight3500 KgPin MillsAlpineMills > Pin MillsBrand > Alpine What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

This 3-axis Arburg Allrounder 920S 5000-3200 hydraulic injection moulding machine was manufactured in 2007. It features a maximum clamping force of 5,000 kN, a screw diameter range of 70 to 90 mm, and a maximum shot weight up to 1,860 g. Consider the opportunity to buy this Arburg Allrounder 920S hydraulic injection moulding machine. Contact us for more information about this machine.

General SKU286M325 MakeALPINE A.G./ Henco & Co TypeATP200 / 4ATP No.manufacturer tag is missing Year of construction±2006 Main Features Motor7.5 KW Inlet diameter200 mm Specified Features - Classifier mill GrinderMulti-wheel air classifier mill Solid cone rotor4x classifierwheel ceramic Rotor size4x dia. 200mm, fine 5µ - 120µ Motor7,5 kW, 400/690Volt, 2900rpm Speed6000rpm Classifier Mills MaterialCeramic, Mild steel Information Mounted on framecheck LocationBarneveld Floorspace2,1x2,1 m Total height4,0 m Weight3900 kgClassifier millsHosokawa AlpineMills > Classifier millsBrand > Hosokawa Alpine What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more  ...

max. format 51 x 33 cm Year of construction 2012 Stacking delivery Palamides Alpha 500 Double benefit Automatic format recognition Waste Rejection Vibrating device Pressing station Roller table Delivery date: immediately from stock Price on request. Worldwide Delivery & Installation

General SKUR0379 MakeAlpine Ultraplex LocationBarneveld Type500 UP beater plate Main Features Motor30 KW Inlet diameter450 mm Width150 mm Specified Features - Fine Impact Mill Grindercheck Grinding room sizedia. 450x150mm Inlet170x100mm Motor30 kW 380/660 Volt Speed4500 rpm Fine Impact Mills MaterialMild steel Information No.162166 Year of construction1981 Floorspace1,1x0,9 M Total height1,1 M Weight720 KgFine Impact MillsAlpineMills > Fine Impact MillsBrand > Alpine What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU252T386 MakeAlfa Laval LocationBarneveld TypeAVNX 4030 AT Main Features MaterialStainless steel Motor18.5 KW Specified Features - Decanter Decantercheck Screw length1485 mm Inletdia. 55 mm Liquid outletdia. 210 Solids outlet286x468 mm Motor18,5 kW Max. rotor speed4000 rpm MaterialStainless steel 1.4306 (304L), Stainless steel 1.4408 Information No.511.5024 Year of construction2001 With switchgearcheck Floorspace2,5x0,9 m Total height1,3 m Weight1400 kg Extra Specificationsbowl material: SS 1.4408 hood and bottom piece material: SS 1.4306 DecantersAlfa LavalCentrifuges > DecantersBrand > Alfa Laval What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld f ...

General SKU244K212 MakeAlexanderwerk LocationBarneveld TypeR-300 Main Features MaterialStainless steel Motor3.6 KW Width300 mm Specified Features - Sieve granulator Granulating sieveGrater/shredder (1x) Sieve sizesdia. 300x130mm Sieve perforationdia. 10mm, Without hopper Inletdia. 270mm Motor3,6 KW, 230/400 Volt (Ex) MaterialStainless steel Information No.039-09709 Year of constructionunknown Mounted on wheelscheck With switchcheck Floor space1,1x1,2 M Total height1,3 M Weight340 KGSieve granulatorsAlexanderwerkSieves > Sieve granulatorsBrand > Alexanderwerk What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU223S097 MakeK.F. Alliance Eng. Limited (UK) LocationBarneveld CEcheck TypeSH Main Features MaterialStainless steel Length2300 mm Width400 mm Specified Features - Vibro feeder MaterialStainless steel 1.4301 (304) Vibro feedercheck Feeder width400mm Feeder length2300mm Feeder height130mm Closedcheck Inletdia. 240mm (3x) dia. 200mm (1x) Outletdia. 240mm With motor1.5 kW 230/400 Volt Information No.8868 Year of construction2002 Mounted on framecheck Floorspace3,1x0,8 M Total height1,8 M Weight1200 KgVibro feedersKF Alliance Engineering Ltd.Conveying systems > Vibro feedersBrand > KF Alliance Engineering Ltd. What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Ba ...

General SKU408S1045 MakeAlexanderwerk LocationBarneveld CEcheck TypeSKM/N-EX Main Features MaterialStainless steel Motor1.5 KW Specified Features - Sieve granulator Rotor sizesdia. 160x85 mm With hoppercheck Inletdia. 120 mm Outletdia. 310 mm Motor1,5 kW 230/400 Volt (Ex) Speed150 rpm. MaterialStainless steel Information No.05132200 Year of construction2001 Mounted on stainl. st. framecheck Mounted on wheelscheck With switchcheck Floor space1,1x1,6 M Total height1,4 M Weight140 Kg ATEX compatiblecheckSieve granulatorsAlexanderwerkSieves > Sieve granulatorsBrand > Alexanderwerk What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU289P535 MakeAlfa Laval LKM TypeLKH 30/220 SSS Mach.No.30-06657 Year of construction1995 Main Features MaterialStainless steel Motor11 KW Specified Features - Centrifugal Pump MaterialStainless steel Centrifugal Pumps PumpCentrifugal pump Number of pumps:1 Capacitycheck unknown With motor11 kW InletDN65 OutletDN50 Information LocationBarneveld Floorspace0,9x0,6 M Total height0,6 M Weight100 KG Extra SpecificationsCECentrifugal PumpsAlfa LavalPumps > Centrifugal PumpsBrand > Alfa Laval What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU213T152 MakeAlfa Laval LocationBarneveld CEcheck TypeCHPX510TGD-15CGRX Main Features MaterialStainless steel Capacity20000 Ltr./Hr. Motor18 KW Specified Features - Separator Separatorcheck Capacity20000 Ltr./h Suitable formax. 1100 kg/m3 Motor18 kW, 400 volt (Ex) Max. rotor speed6240 rpm Mounted on stainl. steel platecheck MaterialStainless steel Information No.4131842 Year of construction2005 Mounted on mild steel platecheck Floorspace1,5x0,8 m Total height1,8 m Weight1840 kg ATEX compatiblecheck Extra SpecificationsInside drum diameter: 438 mm Proces temp.: 0/100 °C. Seperator tooling in box Max 60 discharges of solids per hour, 6-8 ltr discharge volume. SeparatorsAlfa LavalCentrifuges > SeparatorsBrand > Alfa Laval What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any ...

General SKU210P145 MakeMavag AG Verfahrenstechnische Apparate und Anlagen (CH) LocationBarneveld CEcheck TypeR-2-18-400-40-500-316L Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialStainless steel Surface2 m2 Cake60 Ltr. Specified Features - Horizontal plate filter Plate filtercheck Horizontalcheck Filter surface2 m2 Number of platens18 Platen sizesdia.400mm Between the plates40mm Top connectionsdia.28mm Solids outletdia.260mm Liquid outletdia.28mm Max. temperature-5 / +120 degr.C. Motor3,0 KW, 230/400 Volt Cake capacity60 Ltr Centrifugal cake dischargecheck MaterialStainless steel 1.4301 (304), Stainless steel 1.4404 (316L) Information No.29.1000 Year of construction2009 Mounted on framecheck Floorspace1,0x1,0 M Total height2,7 MHorizontal plate filtersMavag AltendorfFilters > Horizontal plate filte ...

General SKU245P306 MakeHosokawa Alpine Type160 UPZ No.6667 Year of construction1995 LocationBarneveld Main Features Motor6 KW Inlet diameter160 mm Specified Features - Fine Impact Mill Grinderplate beater Rotor sizedia.160mm Moving hammerscheck With grinding trackcheck Feeding with rotating valvecheck Motor4,9/6 KW, 380 Volt Fine Impact Mills MaterialStainless steel Information Extra SpecificationsComplete size reduction system including Rotary valve Typ 150 V2A, K-Tron Soder S200 dosing screw, dust filter and AERON filterFine Impact MillsHosokawa AlpineMills > Fine Impact MillsBrand > Hosokawa Alpine What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many mor ...

Alzmetall AB 3 ES - Column Drilling Machine -Drilling capacity / steel 35mm -Projection 280mm -Drilling stroke 180mm Hebkn Auevtzrvj S Tol -Recording MK 3 -Table size 600x470mm -Stepless speed regulation -Drilling depth stop -Drill chuck -Documentation Dimensions: LxWxH1.2x0.8x2.1 meters / Weight 550 kg

Allgaier vibrating screen, Sieve diameter:: 490 mm, Number of sieves:: 1, Mesh size:: 1,2 mm, Electric:: 380/400V , Dimensions (mm): 1100x700 H 1150 , Powder outlet height (mm): 695

Allgaier vibrating screen, Sieve diameter:: 490 mm, Number of sieves:: 1, Mesh size:: 1,2 mm, Electric:: 380/400V , Dimensions (mm): 1100x700 H 1100, Powder outlet height (mm): 815