al used for sale

Key data: 554 mm, 2000 mm

Turning length: 2,000 mm Turning diameter: 554 mm above bed 370 mm over cross slide Spindle bore: Ø 104 mm Spindle speeds: 2,000 rpm 3-jaw chuck: Schunk Ø 350 mm Camlock Control: GE Fanuc Equipped with: - 1x Fixed bezel Ø 245 mm - 1x Fixed bezel Ø 390 mm - 18 Ready tool containers - Various jaws for food - Centering tips - Cooling system -Operating instructions Country of origin: UK Motor power: 7.5 kW Machine LxWxH: 410 x 200 x 175 cm Machine weight: 3600 kg

used baler Manufacturer: ABBA Type: ACOMAT 400 H3A Year of Make: 2008 specifications: Press force: 45 t Drive power: 7.5 kW Throughput capacity: approx. 45 m³/h Filling opening: 1,150 x 850 mm Channel format: 790 x 730 mm (W x H) Bale size: 790 x 730 x length in mm (W x H x L) Binding: 3-fold horizontal Wire push-through: seen in the direction of pressing on the left side Machine dimensions: approx. 4,250 x 2,580 x 2,000 mm (L x W x H) Machine weight: approx. 3,600 kg

Output: 9000 U/h // Bottle Size: 200ml-2l

The machine is in excellent condition. It can reach 9 bags per minute with milk from 3Litres to 25 Litres

clamping force: 1500 kN injection volume: 141 g/PS screw diameter: 35 mm platen size: 470 x 470 mm Condition: used, Specification: horizontal injection moulding machine, Type: Allrounder 470C 1500-400 GE GOLDEN EDITION Injection unit: - Screw diameter: 35 mm (wear-resistant) - Centring ring diameter: 125 mm - Max. shot weight: 141 g (PS) - Injection pressure: 2,500 bar Closing unit: - Clamping force: 1,500 kN - Max. opening stroke: 750 mm - Mould installation height: min. 250 mm - Mould clamping plates: 470 x 470 mm - Approx. operating hours: 79,000 h (still in use) - Operating voltage: 3x 400 V, 50 Hz - Nominal motor heating current: 75 / 40 A - Total current: 115 A - Total connection: 65 kW - Core pulls: 1x - Hot runner control points: 6x - Temperature control unit interfaces: 6x (20 mA) - Approved for high temperatures  ...

Properties: Length 780 mm Total height 2400 mm Motor power 0.25 kW Depth 780 mm Volume 931 L Steel as a material Description: Front flange - DN 50 reduction Flange rear - reduction DN 50 bottom: Disc valve DN 100 Motor: 0.25 KW

1 ALVE rimeless hydro extractor type LUH 1500, year 2017, basket diameter 1500 mm, basket height 800 mm, max. loading capacity 400 Kg, inverter controlled up to 750 rpm, 24 kW, 400 V, 50 Hz, electronic brake system, machine supplied with loading winch

1-deck stainless steel round screen with a screening area of 0.7 m² and a screen diameter of 950 mm. Incl. 1 piece sieve insert (Mw: 0.5 mm), incl. stainless steel base. Drive: 2 x 0.5 kW, 400 volts, 980 rpm.

General SKU261W362 LocationBarneveld MakeAllgaier TypeTSM 2000/DS/1 No.4002 Year of construction1997 Main Features MaterialStainless steel Surface2.6 m2 Sizes diameter1880 mm Specified Features - Tumbler screener Vibro sievecheck Sieve surface2,6 m² Number of sieve decks:3 Sieve sizesdia. 1880 mm With covercheck Inletdia. 200 mm Outletdia. 200 mm Drive excentercheck Motor4 kW, 400 volt, 1435 rpm Sieve perforation0,315mm-0,160mm-0,150mm With brush cleaningcheck With extra sieve deckscheck 3x 0,4mm Tumbler screening machines MaterialStainless steel 1.4301 (304) Information Mounted on mild steel framecheck Total height2,00 m Weight1080 kg CEcheck Floor space2,00x2,00 m Extra Specificationsonly the brush for the lower screen deck is present in the machine.Tumbler screening machinesAllgaierSieves > Tumbler screening machinesBrand > Allgaier What you can expec ...

General SKU261W365 LocationBarneveld MakeAllgaier TypeTSM 2000/DS/1 No.4005 Year of construction1997 Main Features MaterialStainless steel Surface2.6 m2 Sizes diameter1880 mm Specified Features - Tumbler screener Vibro sievecheck Sieve surface2,6 m² Number of sieve decks:3 Sieve sizesdia. 1880 mm With covercheck Inletdia. 200 mm Outletdia. 200 mm Drive excentercheck Motor4 kW, 400 volt, 1450 rpm Sieve perforation0,710mm-0,400mm-0,150mm With brush cleaningcheck With extra sieve deckscheck 3x 0,600mm-0,400mm-0,315mm Tumbler screening machines MaterialStainless steel 1.4301 (304) Information Mounted on mild steel framecheck Total height2,00 m Weight1080 kg CEcheck Floor space2,00x2,00 m Extra Specificationsthe spacer for the upper brush, is not present.Tumbler screening machinesAllgaierSieves > Tumbler screening machinesBrand > Allgaier What you can expect  ...

General SKU004B043 LocationBarneveld MakeAltmayer Rehlingen/Waeschle TypeZGB 200.1-4.5-AC No.68435/10 Year of construction1997, Valve has never been used Material Housing materialCast aluminium hard-coated Rotor materialStainless steel Main Features MaterialAluminium/Stainless steel Motor0.37 KW Inlet diameter200 mm Specified Features - Rotating valve MaterialAluminium, Stainless steel Rotary valve(1x) Rotor diameter200mm Rotor width180mm Inletdia. 160mm Inlet flange sizesdia. 280mm Installation height360mm With motor0,37 KW, 230/400 Volt Information Floorspace0,6x0,6 M Total height0,6 M Weight40 KG Extra SpecificationsMax temperature 70 degree C Technical specs Extra informationMax temperature 70 degree CRotating valvesAltmayerRotary valves > Rotating valvesBrand > Altmayer What you can expect from Foeth: -- Machine is in working condition -- At a reduced p ...

The Heracles system (Alpha M.O.S.) consists of Heracles II unit 230 V MXT5/MXT1701 columns, LHS2 Autosampler, electronic H2 leak detector, AlphaSoft V14 & AroChemBase V 4.1 software package, desktop computer with AlphaSoft installed. From the Heracles E-Nose data sheet: Heracles is an electronic nose based on dual flash gas chromatography technology dedicated to smell and aroma analysis. It can also be used with an autosampler. The system is composed of: - A dual fast GC electronic nose unit (hardware) to detect and analyze the volatile compounds in the sample - A computer for system monitoring, data acquisition and processing with AlphaSoft software - In some configurations: an autosampler for automated sample handling and injection” The system is defective. The VICI valve is probably defective and needs to be replaced. An offer for this is available.

General SKU050Y313 LocationBarneveld MakeJaro Alkmaar No.1654-7024-61 Year of construction1993 Pressure Working pressure jacket6.5 Bar Main Features MaterialStainless steel Volume75 Ltr. Motor0.25 KW Specified Features - Stirring vessel MaterialStainless steel 1.4301 (304) Closed stirring vessel(1x) Capacity75 Ltr Vessel sizesdia. 500x350mm Dished bottomcheck Flat top sidecheck With covercheck Top connectionsdia. 35mm Outletdia. 35mm With jacketcheck Max. temperature60 Degr. C. With propellor stirrermake Lightnin, type HP25 Motor0,25 KW, 230/400 Volt Information Mounted on legscheck Floorspace0,8x0,7 M Total height1,3 MStirring vesselsJaro AlkmaarStirring vessels > Stirring vesselsBrand > Jaro Alkmaar What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide --  ...

General SKU210T077 LocationBarneveld MakeAlfa Laval TypeSharples NX A4230 No.A91-115381 B Main Features MaterialStainless steel Motor30 KW Specified Features - Decanter Decantercheck InletDN80 Liquid outletDN150 Solids outlet500x300 mm Motor30 kW 400/690 Volt Hydraulic drivecheck With hydraulic unitcheck Motor0,22 kW 220-240/380-415 Volt Max. rotor speed3150 rpm MaterialStainless steel Information Mounted on framecheck Floorspace2,9x1,9 m Total height2,9 m Weight2700 kgDecantersAlfa LavalCentrifuges > DecantersBrand > Alfa Laval What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU213T151 LocationBarneveld MakeAlbi Alois Binderberger No.426 Year of construction1977 Pressure Working pressure4 Bar Working pressure jacket4 Bar Main Features MaterialStainless steel Volume4000 Ltr. Pressure4 Bar Specified Features - Pressure vessel MaterialStainless steel 1.4571 (316Ti) Capacity4000 Ltr. Manholecheck Max. temperature+80/-20 degr. C With jacketcheck Max. temperature+126/-20 degr. C Information Floorspace1,5x1,5 m Total height2,9 m Weight1400 kgPressure vesselsAlbi Alois BinderbergerTanks > Pressure vesselsBrand > Albi Alois Binderberger What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU050Y312 LocationBarneveld MakeJaro Alkmaar No.1654-7024-15 Year of construction1993 Pressure Working pressure jacket6.5 Bar Main Features MaterialStainless steel Volume75 Ltr. Motor0.25 KW Specified Features - Stirring vessel Closed stirring vessel(1x) Capacity75 Ltr Vessel sizesdia. 500x350mm Dished bottomcheck Flat top sidecheck With covercheck Top connectionsdia. 35mm Outletdia. 35mm With jacketcheck Max. temperature60 Degr. C. With propellor stirrermake Lightnin, type HP25 Motor0,25 KW, 230/400 Volt MaterialStainless steel 1.4301 (304) Information Mounted on legscheck Floorspace0,8x0,7 M Total height1,3 MStirring vesselsJaro AlkmaarStirring vessels > Stirring vesselsBrand > Jaro Alkmaar What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide --  ...

General SKU064Y422 LocationBarneveld Main Features MaterialStainless steel Motor18.5 KW Specified Features - Rotary Lobe Pump MaterialStainless steel Rotary Lobe Pumps Capacityunknown With motor18,5 KW, 220/380 Volt With variable speed drivecheck Information Mounted on framecheck Floorspace2,1x1,4 M Total height1,8 MRotary Lobe PumpsDiscountAlbin PumpPumps > Rotary Lobe PumpsDiscountBrand > Albin Pump What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU404U1220 LocationBarneveld MakeAlbi Alois Binderberger No.1634 Year of construction1999 Pressure Working pressure2 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialStainless steel Volume2500 Ltr. Motor1.1 KW Specified Features - Stainless Steel Reactor ReactorBioreactor Capacity2500 Ltr. (max. 3400 Ltr.) Vessel sizesdia. 1600x1970 mm Dished bottomcheck Dished top sidecheck ManholeDN100 Top connectionsDN25, DN40 (2x CIP) OutletDN50 Half coil jacketedcheck Max. temperature130 °C With propellor stirrercheck (magnetic) Motor1.1 kW Speed mixing shaft1400 rpm Stainless Steel Reactors MaterialStainless steel 1.4301 (304), Stainless steel 1.4571 (316Ti) Information Floorspace1,85x1,85 m Total height2 m Weight1350 kgStainless Steel ReactorsAlbi Alois BinderbergerReactors > Stainless Steel ReactorsBrand > Albi Alois Binderber ...

General SKU404U1229 LocationBarneveld MakeLudwig Edel No.85 250/1 Year of construction1986 Pressure Working pressure2 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialStainless steel Volume2500 Ltr. Motor1.1 KW Specified Features - Stainless Steel Reactor ReactorBioreactor Capacity2500 Ltr. (max. 3500 Ltr.) Vessel sizesdia. 1600x1970 mm Dished bottomcheck Dished top sidecheck ManholeDN100 Top connectionsDN25, DN40 (2x CIP) OutletDN50 Half coil jacketedcheck Max. temperature-5 °C With propellor stirrercheck (magnetic) Motor1,1 kW Speed mixing shaft1400 rpm Stainless Steel Reactors MaterialStainless steel 1.4571 (316Ti) Information Mounted on legscheck Floorspace1,84x1,84 m Total height2,22 m Weight1310 kgStainless Steel ReactorsAlbi Alois BinderbergerReactors > Stainless Steel ReactorsBrand > Albi Alois Binderberger What you c ...

General SKUR0380 LocationBarneveld MakeAlpine Ultraplex Type500 UP beater plate No.141724 Year of construction1970 Main Features Motor30 KW Inlet diameter450 mm Width150 mm Specified Features - Fine Impact Mill MaterialMild steel Fine Impact Mills Grindercheck Grinding room sizedia. 450x150mm Inlet170x100mm Motor30 kW 400 Volt Information Total height1,1 M Weight1020 Kg Floorspace1,1x0,9 MFine Impact MillsAlpineMills > Fine Impact MillsBrand > Alpine What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKUR0378 LocationBarneveld MakeAlpine Ultraplex Type500 UP beater plate No.135101 Year of construction1966 Main Features Motor30 KW Inlet diameter450 mm Width150 mm Specified Features - Fine Impact Mill MaterialMild steel Fine Impact Mills Grindercheck Grinding room sizedia. 450x150mm Inlet170x100mm Motor30 kW 380/660 Volt Speed4500 rpm Information Total height1,1 M Weight600 kg Floorspace1,0x0,9 MFine Impact MillsAlpineMills > Fine Impact MillsBrand > Alpine What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU227S107 LocationBarneveld MakeHosokawa Alpine (D) TypeLGM 20 ( Long Gap Mill ) No.P1172095 Year of construction2009 Main Features Motor500 KW Specified Features - Fine Impact Mill Grindercheck Rotor sizeDia. 1950x800 mm Grinding room sizeDia. 2000x760 mm With hoppercheck InletScrew (Schneckenbau Prestel) (2x dia. 125mm) Motor500 kW 400 Volt Speed1100 rpm Fine Impact Mills MaterialMild steel Information Total height3,0 m Weight22000 kg CEcheck Floorspace4,9x2,4 m ATEX compatiblecheck Extra Specificationsincluding Reitz fan type KXE 160-063030-00 (2009) 630 m3/h 2980 rpm 200 kW 400/690 volts including cyclone and heating unit with burner monitoring (as is ) Fine Impact MillsHosokawa AlpineMills > Fine Impact MillsBrand > Hosokawa Alpine What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for  ...

General SKU050C482 LocationBarneveld MakeMAVAG Altendorf No.91.1923 Year of construction1992 Pressure Working pressure6 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume100 Ltr. Motor1.5 KW Specified Features - Stirring vessel MaterialStainless steel 1.4435 (316L) Closed stirring vesselcheck Capacity100 Ltr. Vessel sizesø 600x400mm Dished bottomcheck Dished top sidecheck Manholecheck Top connectionscheck (6x) Outletø 20mm With propellor stirrercheck (bottom mounted, magnetic stirrer) Motor1,5 kW 400 V 1450 rpm (Ex) Information Mounted on legscheck (Mounted on wheels) With switchcheck Floorspace1,0 x 0,9 m Total height1,9 m Weight250 kg ATEX compatiblecheckStirring vesselsMavag AltendorfStirring vessels > Stirring vesselsBrand > Mavag Altendorf What you can expect from Foeth: -- Machine is in working condition -- At a reduced price com ...

General SKU225T219 LocationBarneveld MakeAlfa Laval TypeTV No.PH 139576 Year of construction1982 Main Features MaterialStainless steel Volume400 Ltr. Motor0.55 KW Specified Features - Stirring vessel Closed stirring vesselcheck Capacity400Ltr. Vessel sizesDia:1000x1200mm Conical bottomcheck Dished top sidecheck With covercheck Manholecheck Dia: 420mm Top connectionsDia: 50mm (3x) OutletDia: 80mm With paddle stirrercheck Motor0.55kW, 220/380Volt, 1380rpm Speed mixing shaft102rpm MaterialStainless steel 1.4301 (304), Stainless steel 1.4571 (316Ti) Information Mounted on legscheck Weight350kg Floorspace1,3x1,2m Total height1,8mStirring vesselsAlfa LavalStirring vessels > Stirring vesselsBrand > Alfa Laval What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- ...

General SKU261W359 LocationBarneveld MakeAllgaier TypeTSM 2000/DS/1 No.3998 Year of construction1997 Main Features MaterialStainless steel Surface2.6 m2 Sizes diameter1880 mm Specified Features - Tumbler screener Vibro sievecheck Sieve surface2,6 m² Number of sieve decks:3 Sieve sizesdia. 1880 mm With covercheck Inletdia. 200 mm Outletdia. 200 mm Drive excentercheck Motor4 kW, 400 volt, 1440 rpm Sieve perforation0,710mm-0,600mm-0,600mm With brush cleaningcheck With extra sieve deckscheck 3x 0,315mm-0,160mm-0,150mm Tumbler screening machines MaterialStainless steel 1.4301 (304) Information Mounted on mild steel framecheck Total height2,00 m Weight1080 kg CEcheck Floor space2,00x2,00 mTumbler screening machinesAllgaierSieves > Tumbler screening machinesBrand > Allgaier What you can expect from Foeth: -- Machine is in working condition -- At a reduced price  ...

General SKU252X217 LocationBarneveld MakeAlfred Bolz TypeEB-1306-00 No.35897-1 Year of construction2007 Specified Features - Candle filter Material finishHalar coating Pressure Working pressure1.2 Bar Number of vertical pressure tanks1 Main Features MaterialStainless steel Volume240 Ltr. Pressure1.2 Bar Candle filters MaterialStainless steel 1.4404 (316L) Capacity240 l. Vessel sizesDia. 600x900 mm Dished bottomcheck With covercheck Top connectionscheck Outletcheck Max. temperature-25°C-+50°C Information Mounted on framecheck Total height6,0x1,20 m Weight650 kg CEcheck Floorspace0,90x0,60 m Extra SpecificationsWith QVF mobile glas bowl, volume 20 l., pressure -1/+2 bar, allowable temperature 120°C, 3x Adfiltec, candle filters on mobile frame, pressure-1/2 bar, allowable temperature-50°C/+200°C, Endress+Hauser filter with flow valve, type Promass F/ Pro ...

Nozzle separator Brand: Alfa Laval Type: STSX217S-31 C Technical specifications : max. throughput 160 m³/hour max nozzle capacity 60 m³/hour Temperature 0-100 °C Engine power 135 kW Documents from the control cabinet available Documents: Nameplate

General SKUR1226 LocationBarneveld MakeAlpine Augsburg (D) Type710-CW No.15972 Year of construction1974 Main Features Motor55 KW Inlet diameter710 mm Specified Features - Pin Mill Pin disc millcheck 2 Driven rotorscheck Rotor size710mm Number of pins on house side:186 Number of pins on door side:278 Pin diameter10mm With hoppercheck Inlet120x400mm Feeding with rotating valvecheck Motor(2x) size unknown ca. 55 kW each Pin Mills MaterialMild steel Information Floor space2,2x3,5 m Weight5000 Kg Floorspace2,3x2,2 M Total height2,3 MPin MillsAlpineMills > Pin MillsBrand > Alpine What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Used aluminium ladders 1 piece - 14 rungs - 2 pieces - 100,- € 1 piece - 12 rungs - 2 pieces - 80,- € 1 piece - 10 rungs - 2 pieces - 80,- € 4 pieces - 9 rungs - 2 pieces - 80,- € each

greates pass round over bed: 810 mm swing diameter over face slide: 560 mm centre distance: 2000 mm bed width: 480 mm slide valve travel: 400 mm upper head travel: 180 mm turning tool - shaft cross cut: 32 x 25 mm power capacity: 22 kW max. torque on the spindle: 3200 Nm spindle head: Gr. 11, DIN 55027 spindle diameter in front bearing: 152,4 mm spindle bore: 106 mm turning speed range: 9 - 1800 U/min turning speeds: 24 longitudinal feeds:: 0,092 - 41 mm/U face feeds: 0,046 - 20 mm/U metric threading: 0,5-112 mm inch threading: 1/4 - 56 G/1 thread - module: 0,125 - 28 mm thread - DP: 1 - 224 Pitch tailstock quill diameter: 115 mm quill stroke: 225 mm taper of tail spindle: MK 6 max. workpiece weight between centres: 2000 kg max. workpiece weight -without tailstock: 750 kg 3-jaw chuck: Röhm, Ø Overall size: ca. 4600x1900x1600 mm weight: ca. 4300 kg Number of feed stages and threads: 99  ...

Final compression pressure: 10 pe/bar Speed: 745 1/min Volume flow: 3455 dm³/min Motor power: 22 kW

EDM machine Type: Robocut Alpha C600ia Manufacturer: Fanuc Year: 2014 Control: Fanuc Series 31i-W model B X: 600 mm Y: 400 mm Z: 300 mm Including clamping, 3D vice and filters Deionization 50L Machine in good condition, fully functional, under power Find more here - / Contact us at -

Offer 25490 Specifications: - Drilling capacity in steel ST 60 40 mm - Drilling capacity in steel ST 60 50 mm - Drilling spindle holder MK 4 - Drilling spindle stroke 160 mm - Digital speed display - Projection 300 mm - Turning table with vice 440 x 440 mm - Column diameter 145 mm - Feeds-Electromagnetic 0.1 - 0.2 - 0.3 - 0.4 mm/rev - Drilling spindle speeds infinitely adjustable with digital display - 200 - 3200 rpm - Drive 400 V / 1.8 / 2.9 kW -Lighting - E. footswitch - Space requirement approx. W 650 x H 1900 x D 800 mm - Weight approx. 470 kg

Injection Molding Machine Specifications 1. Main Machine Parameters Clamping force: 25 t Tool clamping system: 25 / ... Tool plate dimensions: 400 × 400 mm Clearance between columns: 220 × 220 mm Maximum Plate Distance: 425mm Ejector stroke: 95 mm Ejector force: 18 kN Year of manufacture: 2001 Weight: 2000 kg Dimensions (L × W × H): 2.9 × 0.9 × 1.9 m 2. Injection Unit Injection Unit: ... / 60 Screw diameter: 18 mm Injection volume: 20cc Injection weight: 18 g Specific injection pressure: 2500 bar Screw L/D ratio: 24.5 3. Controls Control System: Selogica

Key data: 1064 V, 1330 , 400

Tipo de rodamiento: 6319 C3 / 6228 C3 Tipo de grasa: Klüber ASONIC GHY72 Velocidad / Frecuencia: 1500-1800 rpm / 50-60 Hz Completamente revisado, 0 horas desde el último mantenimiento, pintado y probado con megger. En excelentes condiciones, listo para funcionar. Fotos adjuntas. infoctenergetica.com +34 674945249

: 40 mm : M 24 : M 30 spindle turning speed - stepless: 160-2250 U/min : MK 3 spindle stroke: 120 mm throat: 293 mm column diameter: 115 mm : 515x360 mm distance spindle /table: min./max. 117/701 mm : 2 x 14 x 224 mm feed: 0,1 + 0,2 mm/U Machine height: 1840 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offered are 2 identical horizontally operating hydraulic injection molding machines from ARBURG. Clamping force: 700kN, opening stroke: 250mm, mold installation height: 200-430mm, mold mounting plates X/Y: 476mm/476mm, movable mold half maximum weight: 250kg, screw diameter: 20/25/30mm, injection pressure: 2250/2240/1550bar, horizontal injection position: max. 120mm, weight: 2090kg, machine dimensions X/Y/Z: approx. 3500mm/1900mm/1950mm. Documentation vorhanden, viewing possible by arrangement.

Description Filter Hose for Alko Mobil Jet 140 to 300 Material: Polyester, BIA Cat: M, antistatic, Weight 460 g/m² We manufacture every filter size! Prices, delivery times and payment terms on request. Telephone advice at: 05656-9239404

: 40 mm threading in St 60: M24 threading in GG 20: M30 Short spindle: MK 3 Center of spindle to wall or column: 293 mm spindle turning speed - stepless: 160 - 2250 U/min Column diameter: 115 mm spindle stroke: 120 mm Machine table - usable table surface: 514 x 360 mm T-Slots Amount - Width - Distance: 2 x 14 x 224 mm Distance spindle-table min.: 117/701 mm feed: 0,10 + 0,20 mm/U Motor output: 1,45 / 1,9 kW height of the machine: ca. 1840 mm weight of the machine ca.: 285 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tumbler screening machine, used Type : ATS 600 / 2 Manufacturer : Allgaier --> Ø 600 mm, 2 screen decks, 3 outlets, with feed hopper.

ALMIG Combi 15-10 rotary screw air compressor YOM 2012. Never used. Motor speed 3000 rpm Motor power 15 kW Volume flow m3/min- 1.84 Volume m3/hour- 110 Max. pressure 10 Bar. Air Receiver Capacity 500L

A horizontal flowpack pillow bag machine (flowwrapper) Alpha Pack is available. Packaging capacity: approx. 20-30 packages/min, max. roll width: 600mm, max. product height: 140mm, max. product length: 1000mm, min. product length: 600mm, product width range: 50mm-280mm, max. film diameter: 300mm, weight: approx. 300kg. Documentation available. An on-site inspection is possible.

Dimensions (L/W/H): 3800x2100x2100 mm Weight: 2900 kg Total power requirement: 19 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 32 mm throat: 295 mm bore stroke: 120 mm : 3 speeds: 125 - 3000 U/min table-size: 300 x 300 mm column diameter: 115 mm total power requirement: 0,75 kW weight: 225 kg dimensions: 900 x 600 x 1800 mm Equipment: - V-belt driven pillar drill - Adjustable drilling depth stop - height-adjustable work table with T-slots - drill chuck The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 1000 mm, 450 mm, 600 mm

Universal Milling Machine ALCERA type 100 M Travel X: 1000 mm Travel Y: 450 mm Travel Z: 600 mm Cone SA40 Spindle speed: from 40 to 2000 RPM Table size: 1400 x 320 mm Year of construction: 11/1989 Scale 3 axes HEIDENHAIN Centralized grease pump Feeds: auto X - Y - Z Joystick command Lubricant pump Voltage: 380 V Width: 2100 mm Depth: 2400 mm Total height: 2000 mm Weight: approx 3 T

1 of used beverage carbonator, make TetraPak, type Alcarb Spark, new 2010, capacity 45.000 lph at 10 g/l. With pump, CO2 injector, Endress & Hauser flowmeters, valves, Siemens S7 plc controls, Danfoss VFDs, holding tank 9.959 L (8.000 L net), etc. Ask for further details.

A column drilling machine Alzmetall with a rotating round table is available. Drilling capacity steel/cast iron: 45mm/50mm, reach: 345mm, tool holder: MK4, speed: 720rpm. Machine dimensions X/Y/Z: approx. 1100mm/600mm/2000mm, weight: approx. 650kg. An on-site inspection is possible.

A compact Arburg injection molding machine is available. Clamping force: 180kN, daylight: 221mm/221mm, platen dimensions X/Y: 400mm/400mm, max. opening stroke: 275mm, min. mold installation height: 150mm, max. platen distance: 425mm, ejector force: 18kN, ejector stroke: 95mm, screw diameter: 15mm, weight: approx. 1900kg, operating hours: approx. 23300h. Documentation available. An on-site inspection is possible.

Alu-Framax 0.90 m †compact, strong, versatile! 🔧🛠 This package includes Doka Alu Framax formwork panels with a height of 0.90 m †ideal for low concreting heights, edge areas, or as a smart addition to existing systems.   ✨ Your benefits at a glance: Lightweight & durable thanks to robust aluminum frame profiles. Flexible handling †manually or by crane. Fewer infill zones due to consistent 15 cm panel grid. Optimized workflows , even in tight site conditions. Easy to clean thanks to colorless powder coating.   📦 Now is the perfect time to expand your site equipment and make your formwork projects even more efficient! Got questions? We’re happy to help! 🙂📞 Price: from € 193,00 / PCS (excl. VAT). Partial quantity: possible Subject to prior sale Classified 3-star ...

Alstom 3 Phase Cast Resin Transformer TTG 1020-4 transformer from 2002, complete (closed module). 1 available 21 KV / 400 V, 50 Hz Manufacturer: Alstom Model: TTG 1020-4 Type: Cast resin transformer Coil Material: Copper Serial Number: 425427/1 Power [kVA]: 1,000 Input [KV]: 21 / 20.5 / 20 / 19.5 / 19 Output [V, A, Hz]: 400 / 1,443 / 50 Around [kV]: 24 Rated current [A]: 28.87 Year of Make: 2002 Weight [kg]: 4.590 Dimensions LxWxH [cm]: 170 x 120 x 190