136,296 used machines on RESALE, but how to find them? Machine Search
A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant The demonstration unit has so far only been used at trade fairs and for demonstrations. The machine is therefore as good as new. TECHNICAL DATA Chamber diameter 200 mm Gas pressure range 2 – 8 bar (g) Fineness range d50 1 – 40 μm Bn83a7ch Nominal gas flow 150 – 200 Nm³/h Dimensions (l/w/h) (without vacuum cleaner) 1.2 x 0.8 x 1.3 m Power supply 230 V; 2.2 kW REFERENCE PRODUCTS Product / End fineness / Throughput Celecoxib 90% ᐸ 2 ...
see side sheet below, with 2-spindle drill head Franz X. LINDNER SBS-2/2, spindle distance 300 mm, (translation 1:1)
A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant The Platform The platform has a universal adapter and contains the necessary electrical and mechanical components for all function modules. This gives you the opportunity to gradually purchase additional modules later and connect them without any problems. The Function Modules The modules contain all process engineering functional components for the respective picoline® variant such as classifier head, housing parts, grinding tools, motor adapters etc ...
A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant The Alpine Ultraplex UPZ is a universal impact mill that can be fitted with a variety of easily interchangeable grinding tolls to achieve different results, such as pin disc, beater disc or pendulum beater. Certain grinding tools can operate together with different grinding tracks, sieves or a combination of both to achieve the desired fineness. This allows the same machine to process many different products such as fibrous roots or spices to plastics, gr ...
with NC round table WALTER 1000 mm, see pictures
0: 200 °C Torque: - 0 Dimensions (HxWxD): 680 x 1320 x 760 mm weight: 177 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Pump Allweiler SNEF120ER46D6.9W61-BGOR - see picture Next: ALWEILER pump with tank Diverse pumps ALLWEILER - for cooling etc., approx. 40 bar (see picture)
: 1800 mm efective widths: je 400 mm length in total: 2000 mm length in width: je 500 mm carrying capacity: je 3000 kg material: Aluminium weight: je 33 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Machine type TIG inverter welding system gas-cooled DC and AC system Alphaforce brand Type W-160 AC/DC Connection voltage 1 x 230 Volt Setting range 5 – 160 amps Duty cycle 30 % ED at 160 Ampere 60% ED at 100 amps 100% ED at 90 amps Current adjustment infinitely variable weldable material thickness 4 mm Cooling inverter by built-in fan Cooling burner gas-cooled Version portable mounting system Fuse 16 amps Dimensions L x W x H 485 x 240 x 435 mm Weight 22 kg Special accessories connection for foot remote control Age 6 months Condition workshop tested as new incl. UVV test protocol Scope of delivery welding system with the following accessories 1 pc TIG burner Alphaweld SR-17, 4 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare parts box kpl. Equipped 1 pi ...
Fine grinding plant consisting of: Alpine 630 AFG fluidized bed counter-jet mill (V ges: 885 dm3, 10 bar pressure-shock-resistant, saerterrad fold-out), feed station, cyclone, 2 pcs. EX-protection valve, control cabinet and 4 pieces of product buckets. Previous use: Grinding of toner. The system can be inspected in a disassembled condition. Available at an additional cost: Dust filter Bühler PGFG 60/18 (39 m2 filter area).
Machine type TIG inverter welding system gas-cooled DC and AC system Alphaforce brand Type W-200 AC/DC Connection voltage 1 x 230 Volt Setting range 5 – 200 amps Duty cycle 25 % ED at 200 amps 60% ED at 110 amps 100% ED at 90 amps Current adjustment infinitely variable weldable material thickness 5 mm Cooling inverter by built-in fan Cooling burner gas-cooled Version portable mounting system Fuse 16 amps Dimensions L x W x H 485 x 240 x 435 mm Weight 22 kg Special accessories connection for foot remote control Age 6 months Condition workshop tested as new incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece TIG burner Alphaweld SR-26, 4 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare parts box kpl. Equipped 1 ...
Vibro screening machine Allgaier type D 950/I Upgrade to Type 950/II Two Vibromotors 0.5 kw Second screen deck, screen elevation 100 mm stainless steel New wire sieve
Auxillary blower for Wichmann WX12V28 Allweiler SNBA-M280GR43C9.2/1w12
A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Rental unit Hosokawa Alpine A FC 200 Flakecrusher. The Alpine AFC Flake Crusher is used to gently grind brittle and easily breakable materials in order to reduce their size. It can obtain low dust granulates thanks to its gentle crushing process controlling the maximum permissible top cut while avoiding the generation of undesired fines. It´s used for coarse milling and can reach particle siz ...
Produkbezeichnung, industrial ink-jet printers Manufacturer: Metronic Model: Alpha Jet Year of construction: 1998 Additional information: see also bite photo Information without guarantee
System: Used decanter / centrifuge Manufacturer: Alfa LAval Model: full coat screw centrifuge Type: AVNX 937 (or NX 4550) . No.: 501.8151.1994 B.: 1994 Drum inner diameter: 450 mm L/D = 5/1: Material: Stainless steel
Safetech ST-Alarm-V2 Safety Weighing Cabin The latest generation of safety weighing cabins, the ST1 series, stands out characterized by an optimized design, especially with regard to personal protection for Working with toxic and active substances. All cabins are equipped with an alarm system and two alarm sensors. The sensors measure the flow velocity on the right and left side of the working opening. As soon as the flow velocity falls below a limit value, both an audible and a visual alarm are triggered. The key advantages at a glance: Unique directional airflow guidance through BAFFLE technology (patent pending) Virtually turbulence-free balance environment Suitable for the latest generation of microbalances Cabin design also enables pipette handling Alarm system with two sensors and data recording Vibration-free due to independent filter unit Easy to cle ...
Rental unit, not for sale. A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Rental Multiprocess System in Pharma design. Stand-alone lab scale grinding and classifying plant. This compact plug-and-play system is perfect for R&D and small-scale productions. It operates in small batches of a few kilos. The system can be fitted with different modules (one at a time) to either grind or classify different products, both coarse and ...
CNC WORKING CENTER type ALBERTI EDIT 3000 composition : 1. boring unit ( axe X and Y ) , vertical nad horizontal independent mandrins 2. vertical router 3. horizontal router CNC 90 by TPA volt. 380/50
SULAK BTS 01 ALPHA glass beveling machine was manufactured in 2014 in the Czech Republic. The easy-to-use glass grinding machine is designed for levelling and grinding flat or rounded edges of, among others, glass and mirrors. The machining of workpieces with a thickness of 3 to 12 mm is performed with water cooled diamond discs and polishing discs. Depending on the design of the diamond disc, the processed glass edges can have a trapezoidal profile, a flat profile or a C profile. The total weight of the machine is 280 kg. Technical data of the SULAK BTS 01 ALPHA glass edging machine - minimum glass size (L x W): 200 x 200 mm - maximum glass thickness: 12 mm - minimum glass thickness: 3 mm - spindle speed: 2800 rpm - number of spindles: 1 - power supply: 3x 400 V; 50 Hz - power: 1.6 kW - dimensions (L x W x H): 3060 x 750 x 1700 mm - BTS 01 ALPHA machine weight: 280 kg
FOR SALE... FOR SALE ALFA LAVAL MIB 303S 13/33 YOB 2011 AT TURKEY TO WHOM IT MAY CONCERN; WE VE USED ALFA LAVAL MIB 303S 13/33 YOB 2011 AT STOCK READY TO SHIPMENT IF YOU INTEREST PLS LET ME KNOW Capt. Ayhan Ugurluba Best regards; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: +90 232 618 03 90 Mobile: + 905556084850 .aliagamarine.com TURKEY
Producer: Bolz Producer: Sinks Allgau Capacity: 500 l The tank is equipped with 2 probes to measure the filling level.
NOE Alu L A lightweight system that can be used to work independently of the crane. The NOEalu L convinces as a real hand formwork, due to its low weight, high flexibility and durability. The low weight of 21 kg/m² Ensures long-term productive Work, even without a crane. The sturdy construction will meet the to cope with the stresses of everyday construction site life. Flexible thanks to a wide, Vertical or horizontal table assortment. The Alulock connects the various components of the system as reliable as it is escaped. The individual panels allow a concrete pressure of up to up to 60 kN /m². NOE Alu L A lightweight system, for work without crane. The NOEalu L convinces as an Hand formwork, due to low weight, high flexibility and durability at the same time. The low weight of 21 kg/m² ensures a permanently productive work, even without a crane ...
Alternative, new box bellows for Trumpf L3030 Siemens -from German production (it is not an original by Trump) -Y-axis (C) -Mapping: Trump ID: 1667805 / 939016 -New part
Stock# U2310 Used stainless steel two-stage piston homogenizer manufactured by Tetra Pak (Sweden) model Tetra Alex 20. Capacity up to 5000 l/h at 160 bar pressure. Number of pistons: 3. Piston diameter: 50 mm. Piston material: stainless steel. Main drive: ABB electric motor 30 kW, 400 V, 50 Hz, 1475 rpm, IP55. Hydraulic drive: 0.25 kW, 400 V, 50 Hz, 1410 rpm, IP55. Cooling water requirements: 130 l/h. Stainless steel covers included. Weight: 1355 kg.
AGEING OVEN FOR ALUMINUM EXTRUSIONS The aging furnaces are used in the aluminium profile industry for the elimination of internal stresses of aluminum materials after extrusion and for hardening them. The ovens are custom designed as batch type with high speed ventilation and high efficiency in order to achieve needed hardness demand on the aluminum work pieces. Motion of the batches is done by a ground trolley or a ground conveyor system. The oven door could be an automatic guillotine type or manual hinged door. The whole process is PLC controlled, data logging option is an advantage during the operation. Electricity, liquid or gas fuel is used for heating the ovens. The ageing ovens are CE certificated and conforms to the European Norms.
1 of used bag-in-box filler, make Alfa Laval, type Piccolo, semi-automatic, new 2011. With nitrogen connection. Used for filling apple-juice and wine in 2 and 3 liter bags with Vitop caps.
Used hammer mill made by Alpine, type B 630. Manufacturer's documentation.
Rental system Hosokawa Alpine AS 100 Aeroplex, not for sale. The Hosokawa Alpine Aeroplex AS spiral jet mill is a simple jet mill without dynamic classifier (different to our Hosokawa Alpine AFG) that allows the ultrafine micronization with a final fineness of around 10 to 150µm of different products. Mainly dry non abrasive materials up to 3 Mohs hardness can be pulverized although some models allow wear protection inserts within the grinding chamber (pending availability). The micronizer design without rotating parts (thus no bearings or grease) makes this mill especially suitable for pharmaceutical and food applications, although it´s used as well on the chemicals industry for instance. The comminution takes place inside the grinding chamber where the product is accelerated by the compress gas injected through the grinding nozzles causing the different particles to collide with ...
No.: 2324 1 used strand-pelletizer Alphatec type AS-G 200 E year 2019, very good condition - lab / demo use only working width: 200 mm drive 7,5 KW – AC frequency controlled cutting rotor with hard-metal teeth pneumaticm pressure roller device Machine is ready for demo. More strand-pelletizer ex our Stock available: Scheer, Automatik, Rieter, IPS, AlphaTec, Pelltec, .. Our actual machine stock-list you can find on our Homepage: plasticotrading.de
Rental Hosokawa Alpine UPZ 100 cryogenic system (LN2) by Alpine Rentals. Technical details Design: Non Pressure Shock Resistant (NPSR), non ATEX Suitable for cryogenic grinding with LN2 Material of construction: stainless steel Without wear protection Batch operation, for a few kilos normally (product dependent) Scope of supply 100 UPZ system with grinding tools of choice, small feeding hopper with a dosing channel, cooling screw to feed the LN2, LN2 container, filter and barrel to collect the fines. Includes an operating panel, switch cabinet and a vacuum cleaner. LN2 to be provided on-site This small size system with an universal mill UPZ 100 can be used for the production of small batches as well as for R&D purposes. Thanks to the different grinding accessories it can be adapted to different tasks and target fineness. Suitable for the cryogenic grinding with liquid nit ...
used
Qty. 1 Second-hand polishing machine Mfc.: Madar Aluminium Built: 2010 Type: PM 2000 Overhauled: No, but the machine was very rarely used. Operation length: 7000 mm Operation width: 800 mm Profile thickness (workpiece thickness): 10 mm up to 200 mm Polishing drive: 2 x 25 kW including converter (Lenze) Power total: 65 kW Siemens PLC system & touchscreen: PLC -SIEMENS S7200 Touchscreen - SIEMENS TOUCH PANEL TP177MICRO ( 1P 6AV6 640-0CA11-0AX0)
PRESS FOR PRODUCTION ALUMINIUM TRAYS FOR ALIMENTARY USE COMPLETE WITH DOUBLE IMPRESSION MOULD-1100 CC. COMPOSED OF: A LUBRICATION UNIT 4-COLUMN MOLDING UNIT TOW-SCRAP CONTROL PANEL. 55 STROKES/MINUTE DEPENDING ON THE MOULDS. PASS COLUMNS FOR MOULDS UP TO 800 MM
Yaskawa AC servomotor with Alpha gearbox SGMAH-08AAA61D-OY, 750 W, V 200, A 4.4, Nm 2.39 r/min 3000, Ins. b
PRODUTECH ALPI DECA N coil-fed punching machine which was built in Italy in 2010 is designed for precision punching, blanking and marking of sheet metal with a maximum thickness of 3 mm. The machine’s structure, made of thick electrically welded steel sheets, has all the necessary components to ensure the versatility of high-capacity mass production. One of these elements is the MultiTool head with punches designed for all types of machining, through which any shape can be punched. In addition, each of the punch holders and dies can be controlled independently, even during rotation. The machining process starts with the gradual unrolling of the sheet metal from the coil towards the punching station by the straightener and decoilers. A feed system consisting of rubber-coated and ground roller assemblies then moves the material during continuous machining without the need for stops or ...
CNC lathe GILDEMEISTER CTX ALPHA 300 with bar feeder and parts pick-up device Built in 2010 in good condition. Duty Cycle: 22930 Hours: 7326 Control Heidenhain CNC-Pilot 640 Circulation over bed: 380 mm Circulation via face slide: 290 mm Spindle bore: 73 mm Flat travel ( X ) : 190 mm Longitudinal travel ( Z ) : 335 mm Speed max. 6000 rpm C-axis 360° Number of driven tool stations 12 pos. Tool holder VDI 30 Accessories: 3 jaw chuck hydraulic 170 mm Conveyor Coolant system Hydraulic hollow clamping device Tool drive C-axis Parts pick-up device Bar Feeder Irco RBK10012 Tailstock
Rental Hosokawa Alpine ACM 2 system by Alpine Rentals. The Hosokawa Alpine Mikro ACM impact classifier mill is perfect for the fine grinding of different dry materials with a precise control over the particle´s top cut thanks to its integrated classifier wheel design. This micronizer can be used to pulverize different coarse products to finer powders and within different industries where micronization might be needed, such as minerals, chemicals, food, pharma, cosmetic, etc. This grinder is able to process coarse products up to approx. 3 Mohs´ hardness by reaching an extremely high end-product fineness values between d97 10 to 120 microns top size (product dependent) at the lowest possible energy consumption. The comminution takes place in the bottom part of the grinding chamber where the rotor plate fitted with grinding tools (hammers or pins) impacts and projects the particles a ...
A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Rental Multiprocess System in wear protected design. Stand-alone lab scale grinding and classifying plant. This compact plug-and-play system is perfect for Research and Development (R&D) and small-scale productions. It operates in small batches of a few kilos. The system can be fitted with different modules (one at a time) to either grind or classify different products, both coars ...
Alimak TPL 2000D Transport Platform Brand ALIMAK HEK Type TPL 2000D Year of construction 2014 Serial number 50229 Weight 1850kg Overall dimension L 1500mm Overall dimension W 3200mm Power connections: 400 V, 50 Hz, 3 Ph.; Nominal power: TP 2x3.8 kW, MH 2x7.6 kW; Nominal current: TP 15.4 A, MH 30.4 A; Connected load: TP 10.8 kVA, MH 21 kVA; Fuse: 32 A Payload (kg) 2000 Number of people max. (including payload) TP Mode 7 Number of people - MH mode 0 Lifting speed (m/min) Operating mode TP 12 Lifting speed (m/min) MH Mode 24 Max. lifting height (bound) 100 m Max. distance (m) 7.5 Max. overhang (m) 4.5 Max. height of 1st guying (m) 6 Mast type triangular 350, tubular steel More items - new and used - can be found in our shop! International shipping costs on request!
Alimak TPL 2000D Transport Platform Brand ALIMAK HEK Type TPL 2000D Year of construction 2013 Serial Number 50138 Weight 1900kg Overall dimension L 1500mm Overall dimension W 3200mm Power connections: 400 V, 50 Hz, 3 Ph.; Nominal power: TP 2x3.8 kW, MH 2x7.6 kW; Nominal current: TP 15.4 A, MH 30.4 A; Connected load: TP 10.8 kVA, MH 21 kVA; Fuse: 32 A Payload (kg) 2000 Number of people max. (including payload) TP Mode 7 Number of people - MH mode 0 Lifting speed (m/min) Operating mode TP 12 Lifting speed (m/min) MH Mode 24 Max. lifting height (bound) 100 m Max. distance (m) 7.5 Max. overhang (m) 4.5 Max. height of 1st guying (m) 6 Mast type triangular 350, tubular steel You can find more transport platforms - new and used - in our shop! International shipping costs on request!
maximum number of results exceeded
please refine your search
