al saw used for sale

Equipped with 6-Cyl \"Mercedes\" Diesel engine; new type of engine: OM366A turbo; 125 KW; 16 gears; (fast runner); 3 double-acting front hydraulic valves; 3 double-acting rear hydraulic valves; lifting device; lower drawbar; Auction-ID: A1-40134-20

Equipped with: Front loader without bucket (Stoll 30 FZ profiline)PTO speed; 540/750/1000, 6 gears 4 groups high and low, 4 double valves rear, tow bar, Auction-ID: A1-40134-35

Equipped with 6-Cil. \"MwM\" diesel engine; PTO speed:750/1000; 3 double-acting hydraulic valves; hydraulic brake valve; depressurized return; air system; subtract hash; sparboard control; front linkages 1 double-acting front hydraulic valve; working air conditioning; Auction-ID: A1-40134-22

• Fendt Farmer 105 LS Turbomatik • Year of construction: 1981 • Operating hours: approx. 23,017 h • Power: approx. 59 kW • Tractor with front loader • Cabin available • Rear 3-point hitch available • Hydraulic connections available • PTO 540 / 1000 rpm • Vehicle registration document / registration certificate available Auction-ID: 04K-0UB-1

Equipped with: French documentation, 9700 hours, recent maintenance carried out, front linkage incomplete, 5.9-liter 6-cylinder, 4WD (4x4), synchronous gearbox, PTO speed: 540/1000 rpm, 30 km/h, three double-acting spool valves with float position, 7-pin plug., is in good condition Auction-ID: A1-40134-73

Equipped with: PTO speed 540/540e/1000, 2 double valves rear, tow bar, Auction-ID: A1-40134-34

Hilo works badly/not. There is a possibility to view this lot by appointment via: w.vanderveen@troostwijkauctions.com Auction-ID: A1-40134-42

Fiat 1000-1 SDT, year of construction 1975, first registration 07.11.1978 All-wheel drive tractor (DT) in reinforced SDT version 4-cylinder diesel, 5,461 cc, 81 hp at 2400 rpm Operating hours: approx. 8,046 h read Fully functional and ready to drive Manual transmission, robust and maintenance-friendly technology PTO 540 / 1000 rpm Rear hydraulics with three-point hitch available Retrofitted cab with protective frame Front tyres 12.4-28, rear tyres 16.9-38 Used condition with age-related wear and patina Vehicle documents completely available Homologated, maximum speed 30 km/h Self-drive export possible Auction-ID: 04K-07E-1

Equipped with PTO shaft 540/1000, PTO manual clutch is fixed, front loader with third function and gearbox (L1150xB850x700 mm), 4x4 working, power steering, lighting needs to be checked. Auction-ID: A1-40134-94

Inside stainless steel; exterior insulated and clad with aluminum Auction-ID: A1-40134-361

Equipped with 6-Cil. 912 diesel engine; lower drawbar; 3 double-acting hydraulic valves; depressurized return; PTO brake valve: 540/1000rpm; \"Mailleux\" front loader MX100; hydraulic quick coupler; additional hydraulic function; Adjustable handlebar: Auction-ID: A1-40134-159

Clean Deutz TTV 6190 with GPS/RTK installed on the roof. Good equipment and ready for immediate use. incl. K80 ball & hydraulic top link, compressed air system ec... as can be seen in the pictures. Machine runs smoothly Auction-ID: A1-45733-12

Everything works properly. Comes loose with a complete air brake system. Hours reading not readable. Auction-ID: A1-40134-87

Equipped with 6-Cil. \"FIAT\" diesel engine; 160 hp; mechanical transmission; mechanical forward/reverse; 4 gear groups can be shifted 4 times each; PTO: 540/1000 rpm; 3 double-acting hydraulic valves; air system; adjustable tow bar; original \"Fiat\" wheel weights (rear 300 kg / front 80 kg); original \"Fiat\" front weights 10 pieces of 40kg each; roof hatch; front window can be opened; Auction-ID: A1-40134-21

Collection by appointment only on Wednesday 20 and Thursday 21 May 2026 from 09:00 to 16:30 (BST). This item is sold ex-foundation and consequently, all the logistical arrangements, including dismantling, packing loading the goods, transport, customs, and delivery to the final destination, are the responsibility of the Buyer. Auction-ID: A7-45642-31

Included: crate Auction-ID: A1-45762-60

Drum diameter: approx. 400 mm; drum capacity: approx. 27 l Auction-ID: A1-45711-331

Qty 3 , Dimensions and weight per unit. Collection by appointment only on Wednesday 20 and Thursday 21 May 2026 from 09:00 to 16:30 (BST). This item is sold ex-foundation and consequently, all the logistical arrangements, including dismantling, packing loading the goods, transport, customs, and delivery to the final destination, are the responsibility of the Buyer. Auction-ID: A7-45642-87

Alup Piston Compressor - Tank 350 liters - Soundproofing enclosure (68 dB(A) Drive power 7.5 kW Delivery pressure 10 bar Flow rate 815 dm³ /min Total power requirement 7.5 kW Machine weight approx. 0.4 kg Condition: unchecked (6) Auction-ID: A7-45761-885

Dimensions and weight per unit. Collection by appointment only on Wednesday 20 and Thursday 21 May 2026 from 09:00 to 16:30 (BST). This item is sold ex-foundation and consequently, all the logistical arrangements, including dismantling, packing loading the goods, transport, customs, and delivery to the final destination, are the responsibility of the Buyer. Auction-ID: A7-45642-102

Drilling depth: 180 mm Speed: 25 - 3,000 rpm Table dimensions: 400 x 300 mm Auction-ID: A7-45768-70

30978-0181. Collection by appointment only on Wednesday 20 and Thursday 21 May 2026 from 09:00 to 16:30 (BST). This item is sold ex-foundation and consequently, all the logistical arrangements, including dismantling, packing loading the goods, transport, customs, and delivery to the final destination, are the responsibility of the Buyer. Auction-ID: A7-45642-26

Collection by appointment only on Wednesday 20 and Thursday 21 May 2026 from 09:00 to 16:30 (BST). This item is sold ex-foundation and consequently, all the logistical arrangements, including dismantling, packing loading the goods, transport, customs, and delivery to the final destination, are the responsibility of the Buyer. Auction-ID: A7-45642-147

Included: trolley with 4 swivel castors, and measuring device Auction-ID: A1-45762-39

Collection by appointment only on Wednesday 20 and Thursday 21 May 2026 from 09:00 to 16:30 (BST). This item is sold ex-foundation and consequently, all the logistical arrangements, including dismantling, packing loading the goods, transport, customs, and delivery to the final destination, are the responsibility of the Buyer. Auction-ID: A7-45642-139

S/N:PM20VPB913258. Collection by appointment only on Wednesday 20 and Thursday 21 May 2026 from 09:00 to 16:30 (BST). This item is sold ex-foundation and consequently, all the logistical arrangements, including dismantling, packing loading the goods, transport, customs, and delivery to the final destination, are the responsibility of the Buyer. Auction-ID: A7-45642-41

Adjustable working height. Collection by appointment only on Wednesday 20 and Thursday 21 May 2026 from 09:00 to 16:30 (BST). This item is sold ex-foundation and consequently, all the logistical arrangements, including dismantling, packing loading the goods, transport, customs, and delivery to the final destination, are the responsibility of the Buyer. Auction-ID: A7-45642-106

Decks (Trap door)2400 x 600mm Qty 8, 2100mm braces (Qty 9), 2000mm double width frames (Qty 2), 1000mm double width frame (Qty 2), 2400 x 1400mm double width tow board, 2400 x 850mm single width tow board (Qty 4), 1000mm single width frames (Qty 10), 2000mm single width frames (Qty 12), 1800 x 600mm platforms with trap door (Qty 3), 3000mm closed stabilisers (Qty 12), 2400mm advanced guard rails (Qty 13), Adjustable leg wheels (Qty 14). Collection by appointment only on Wednesday 20 and Thursday 21 May 2026 from 09:00 to 16:30 (BST). This item is sold ex-foundation and consequently, all the logistical arrangements, including dismantling, packing loading the goods, transport, customs, and delivery to the final destination, are the responsibility of the Buyer. Auction-ID: A7-45642-144

Walk through frames (Qty 4), 1500mm guards rails (Qty 10), 1500mm tow board, 1000mm frames (Qty13), 1500 trap door decks (Qty 3), Fixed feet adjustable (Qty 2), Adjustable wheels (Qty 8). Collection by appointment only on Wednesday 20 and Thursday 21 May 2026 from 09:00 to 16:30 (BST). This item is sold ex-foundation and consequently, all the logistical arrangements, including dismantling, packing loading the goods, transport, customs, and delivery to the final destination, are the responsibility of the Buyer. Auction-ID: A7-45642-145

Missing front wheels Collection by appointment only on Wednesday 20 and Thursday 21 May 2026 from 09:00 to 16:30 (BST). This item is sold ex-foundation and consequently, all the logistical arrangements, including dismantling, packing loading the goods, transport, customs, and delivery to the final destination, are the responsibility of the Buyer. Auction-ID: A7-45642-146

with 3 vices, drilling capacity in steel (diameter) 40 mm Projection 345 mm Drilling stroke 200 mm Table clamping area 720 x 560 mm Speed 60 - 765 rpm Feed rate 0.15 - 0.2 - 0.3 - 0.36 mm/rev Tool holder MK 4 Total power requirement 3.0 kW Auction-ID: A7-45768-25

1 semi complete, including 32 Bazaar Palette, all new type kitchen, decoration, interior, DIY textile, food, leisure, creative, festive, literature, gel, hydro, clock, cushion, furniture etc more or less about 45,000 pieces Auction-ID: A1-45282-184

Passenger car ALFA ROMEO 166 3.0 V6 automatic, first registration 29.09.1999, according to the statement of the owner under 200,000 km, approx. 166 kW, VIN ZAR936000000000034454, leather, automatic transmission, electric driver's seat heated, wooden steering wheel, EASP, single-family home, air conditioning, colour no. 814, bought in 2019 with defective control unit automatic transmission, 3-speed still possible according to driver's statement, HU 07/21, no vehicle documents available

Nominal temperature -40 to +180 °C, power 11 kW, interior volume 734 l, interior dimensions 1200x600x1020 mm Auction-ID: A1-45682-39

1 semi complete, including 32 Bazaar Pallets, all new type kitchen, decoration, interior, DIY textile, food, leisure, creative, festive, literature, gel, hydro, clock, cushion, furniture etc more or less about 45,000 pieces Auction-ID: A1-45282-173

Taglio ad immersione Capacità Max Kg/h 250

Capacity: 230 x 125 mm. Number of axes: 4 Axis diameter 40 mm Bottom 6.3 kW, right/left 7.5 kW, top 7.5 kW Mobile axis for various widths Pneumatic pressers Variable feed speed Motorized height adjustment of the top bar Feed table 2000 mm length Knife heads included

Capacity: 260 x 130 mm. Spindles: 5 Shaft diameter 40 mm Bottom 4 kW, right/left 7,5 kW, top 5,5 kW, bottom 4 kW Cardan shaft drive Pneumatic pressures Feed speed variable, motor 3 kW Motorised height adjustment of top presssure beam Infeed table 2200 mm length tools not included

Capacity: 180 x 100 mm. Spindles: 4 Bottom with referencing 4kW, fence 3kW, near 3kW, top 4kW Motorised thickness adjustment 4 cutterblocks Chaindrive Infeed table 1m70. long

Four-sided planer Working height: 740-750 mm Max working width: 305 mm Min working width: 50 mm Max workpiece height on 2 sides: 310 mm Max workpiece height on 4 sides: 160 mm Min workpiece height: 17 mm Feed speed steplessly adjustable: 10-60 m/min motors: bottom 11 kW, top 11 kW, right 7.5 kW, left 11 kW feed motor: 7.5 kW motor height adjustment: 1.5 kW speed 5,500 rpm driven top and bottom feed rollers

Pull-out ladder KRAUSE aluminium 3x8 steps

Notebook LENOVO Thinkpad E14 Gen5 Aluminium 21JK-005AGE, S/N PF-4NKV4M, internal NBSBG004, docking station, without software

A set of diagonals with dimensions of 99cm and 116 cm suitable for 110 cm deep racks of Alser brand. Auction-ID: A1-45489-19

Machine type: Universal milling machine Manufacturer: ALCERA (AMSTUZ / LEVIN) Model: 6S Year of manufacture: 1979 Table size: approx. 1100 x 265 mm Longitudinal travel (X): approx. 700 – 800 mm Cross travel (Y): approx. 200 – 250 mm Vertical travel (Z): approx. 400 mm Spindle: Horizontal spindle with vertical milling head Spindle taper: ISO 40 Spindle speed: approx. 30 – 1000 rpm (multi-stage gearbox) Feed: Mechanical feed on X/Y/Z axes Control: Heidenhain digital readout (3-axis DRO) Condition: Used, visible signs of wear and chips Remarks: Robust conventional milling machine suitable for toolroom and general machining; equipped with digital readout for improved positioning accuracy Approx. own mass: 1800 – 2200 kg Approx. dimensions (LxWxH): 2000 x 1800 x 1800 mm Auction-ID: A7-45364-9

Folding transport trolley aluminium

Aluminium roof stand/trestle ALTRAD BAUMANN, 2 pcs., with further content Palette

Masonry stairs aluminium approx. 100b cm, 2 pcs.

Trench bridge aluminium approx. 110x300 cm

Transport trolley made of aluminium profiles for cables approx. 120x160h cm

Deluxe cab with Dynamic damping seat DDS HD brake writing 50km/h 175 HP , with Boost 225 HP 20 LED lights 360 degrees GPS preparation Air and oil brakes LS load sensing valve Radio Bluetooth AFS 700 PLUS Display with isobus Valves double action Front lift Front PTO PTO speed 540/750/1000 Traktor still in factory warranty! Auction-ID: A3-43516-4500