We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,372 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Description: Saw blade maximum diameter 400 mm, guide slot width of the riving knife 13 mm, voltage 400 V, power main motor 5.5 KW, stop with digital display, swivel range 0-45°, cutting length 2905 mm, cutting width 1000 mm, carriage length: 3000 mm, 4000 rpm, with scorer, with CE certificate serial number: 110,421,005, Approx. Onsite Dimension. (l x w x h): 3,100 x 2,900 x 1,800 mm, weight approx.: 1,000 kg
used
Description: Cutting height approx. 155 mm ,with saw blade diameter 450 mm , Tool width maximum 30 mm at 0°, maximum 20 mm at 45° Scoring blade diameter 120 mm Without CE document , Approx. Onsite Dimension. (l x w x h): 1,900 x 2,900 x 1,600 mm, weight approx.: 1,000 kg
used
additional pad at the trimming table for Altendorf F45 (2 pieces available)
used
used
You are responsible for dismantling and transporting this lot. There are no tools available. Incl manifold
used
with 7?- touch screen - exhibition machine - new exhibition machine
used
sliding table length: 3000 mm; cutting width at the fence: 1300 mm; cutting width at the cross cut: 3200 mm; cutting depth: 145 mm; scoring unit: Ja; height adjustment sawblade: elektrisch; tilting adjustment sawblade: elektrisch; adjustment fence: elektrisch; adjustment crosscut fence: manuell; read out tilting: Digitalanzeige; read out sawblade height: Digitalanzeige; read out crosscut: digital; Anzeige Ablänglineal: Scala; sawblade diameter: 450mm; speeds: 4; motorpower: 5,5kW; suction connection: 80 und 120mm; machine length: 3600mm; machine width: 2200mm; weight: 1200 kg; Das Bedienpult befindet sich in Augenhöhe.
used
Carriage 3m40 Main motor: 5.5 kW Speeds: 3000, 4000, 5000, 6000rpm Sawblade tilting: -45 ? / 90 ? motorized automatic Sawblade rise, fall and tilt motorised Motorized automatic right stopper 1m35 Cross fence for cutting up to 3m20 automatic motorized Max sawblade 450mm
used
table length: 2,900 mm, cutting width: 1,200 mm, Approx. Onsite Dimension. (l x w x h): 3,000 x 2,000 x 1,300 mm, weight approx.: 2,000 kg
used
Description: Nominal power: 2000 W Nominal speed: 4200 rpm Blade diameter: 254 mm Max. material thickness: 90 mm Serial number: R11W01 00067 Approx. Onsite Dimension. (l x w x h): 920 x 570 x 600 mm, weight approx.: 20 kg
used
Motor tube Notchers from ALMI AL1â2U Notching of gas -, steam -, stainless steel, non-ferrous, as well as numerous other pipes with heavy use, ALMI has developed a series of particularly efficient pipe Notchers with electric drive. Wherever ensure the Notcher ALMI extremely quickly and accurately for the correct tube recess where welded tubes at a 90 ° angle. They are suitable also for the production of double corner joints. The pipe Notchers with a 2.2 KW motor is equipped for intensive use. The engine forms a whole with special eccentric shaft, which drives the notching tool. The model AL1-2U also has a Notcher for zinc spout. The tube Notcher has a 0 voltage fuse, and a protection device. Properties High productivity Low investment costs Several diameter available immediately Ideal for double corner joints up to 5 mm wall thickness (for VA up to 4 ...
used
new
: 26,9 / 33,7 / 42,4 mm : 3/4, 1, 1 1/4 Zoll wall thickness max.: 4 mm wall strength: VA 3 mm weight of the machine ca.: 8 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: 27 / 34,8 / 42,8 /49 / 60 mm : 3/4, 1, 11/4, 11/2, 2 Zoll wall thickness max.: 5 mm wall strength: VA 4 mm voltage: 230 oder 400 V total power requirement: 2,2 kW weight of the machine ca.: 93 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: 42,4, 48,3 mm : 1 1/4, 1 1/2 Zoll wall thickness max.: 4 mm wall strength: VA 3 mm weight of the machine ca.: 15 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: 48,3 / 60,3 mm : 1 1/2, und 2 Zoll wall thickness max.: 4 mm wall strength: VA 3 mm weight of the machine ca.: 15 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
Drilling capacity in St 60: 40 mm threading in St 60: M 24 mm threading in GG 20: M 30 bore stroke: 120 mm Short spindle: MK 3 throat: 293 mm column diameter: 115 mm Machine table - usable table surface: 514 x 360 mm T-Slots Amount - Width - Distance: 2 x 14 x 224 mm Distance spindle - machine table min./max.: 117 / 701 mm feed: 0,10 + 0,20 mm/U spindle turning speed range: 160 - 2250 UpM total power requirement: 1,45 / 1,9 kW height of the machine: 1840 mm weight of the machine ca.: 285 kg Standard equipment: - Mushroom pushbutton (latching) for EMERGENCY STOP - Reversing switch for right-left rotation - Motor protection switch - Speed adjustment stepless - Speed display digital - Feed overload protection - Protection IP 54 - Connector (fully assembled, cable length 2 m) - Spindle protection with electrical protection Pos. 25 Coolant device B, consisting of: separate container (33l), Pu ...
new
: 12 mm : M 10 : B 16 : 250 - 5000 U/min. spindle stroke: 40 mm throat: 200 mm column diameter: 50 mm : 2 x 12 x 80 mm : 300x240 mm : 2 x 12 x 80 mm : 110 / 250 mm feed: von Hand : Handrad Machine height: 670 mm total power requirement: 0,7 kW weight: 64 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
Drilling capacity in St 60: 30 mm threading in St 60: M 16 threading in GG 20: M 20 Short spindle: MK 3 bore stroke: 140 mm throat: 293 mm column diameter: 115 mm Machine table - usable table surface: 514x360 mm T-Slots Amount - Width - Distance: 2 x 14 x 224 mm Distance spindle - machine table min./max.: 132/724 mm feed: Hand spindle turning speed range: 225-4300 UpM height of the machine: 1790 mm total power requirement: 1,0/1,6 kW weight of the machine ca.: 260 kg Standard equipment: - Mushroom pushbutton (latching) for EMERGENCY STOP - Reversing switch for right-left rotation - Motor protection switch - Speed adjustment stepless - Speed display digital - Protection IP 54 - Connector (fully assembled, cable length 2 m) - Spindle protection with electrical protection The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
Drilling capacity in St 60: 40 mm threading in St 60: M 24 threading in GG 20: M 30 Short spindle: MK 3 bore stroke: 120 mm throat: 293 mm column diameter: 115 mm Machine table - usable table surface: 514x360 mm T-Slots Amount - Width - Distance: 2 x 14 x 224 mm Distance spindle - machine table min./max.: 117/701 mm feed: 0,10 + 0,20 mm/U spindle turning speed range: 160-2.250 UpM total power requirement: 1,45/1,9 kW height of the machine: 1840 mm weight of the machine ca.: 285 kg Standard equipment: 7 TFT - LCD display with touch function: manual input of spindle speed Setpoint, speed display actual value, integrated drilling depth display with touch Zero point transfer, virtual drilling depth scale in the display, machine Status displays and warnings in the display, service information, selectable User language: DE / EN / FR / ES / IT / NL / RU Pos. 37.5 Technology computer in the disp ...
new
: 18 mm : M 12 : M 14 : MK 2 : 225-4.300 U/min. spindle stroke: 80 mm throat: 190 mm column diameter: 65 mm : 300x240 mm : 2 x 12 x 80 mm : 75/357 mm : 300x240 mm : 2 x 12 x 80 mm : 437/437 mm feed: von Hand : Handkurbel total power requirement: 0,37/0,55 kW Machine height: 840 mm weight: 110 kg Standard equipment: - Main switch with motor protection switch lockable - Reversing switch for clockwise and anti-clockwise rotation - Speed adjustment stepless - Protection IP 54 - Mushroom pushbutton (latching) for EMERGENCY STOP - Spindle protection with electrical protection The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: 14 mm : M 10 : MK 2 : 230-4.000 U/min. spindle stroke: 80 mm throat: 190 mm column diameter: 65 mm : 300x240 mm : 2 x 12 x 80 mm : 75/357 mm : 300x240 mm : 2 x 12 x 80 mm : 437/437 mm feed: von Hand : Handkurbel Machine height: 825 mm total power requirement: 0,7 kW weight: 83 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: 16 mm : M 12 : MK 2 : 100-2.000 U/min. spindle stroke: 80 mm throat: 190 mm column diameter: 65 mm : 300x240 mm : 2 x 12 x 80 mm : 75/357 mm : 300x240 mm : 2 x 12 x 80 mm : 437/437 mm feed: von Hand : Handkurbel Machine height: 825 mm total power requirement: 0,7 kW weight: 83 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: 40 mm : M 24 : M 30 : MK 3 bore stroke: 120 mm throat: 293 mm column diameter: 115 mm : 514x360 mm : 2 x 14 x 224 mm : 117/701 mm feed: 0,10 + 0,20 mm/U spindle turning speed range: 160-2.250 UpM total power requirement: 1,45/1,9 kW height of the machine: 1840 mm weight of the machine ca.: 285 kg Standard equipment: - Mushroom pushbutton (latching) for EMERGENCY STOP - Reversing switch for right-left rotation - Motor protection switch - Speed adjustment stepless - Speed display digital - Feed overload protection - Protection IP 54 - Connector (fully assembled, cable length 2 m) - Spindle protection with electrical protection The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
bore capacity in steel (diameter): 40,0 mm throat: 293 mm bore stroke: 120 mm morse taper: 3 MK table:: 514 x 360 mm turning speeds: 160 - 2250 U/min engine output: 1,45/1,90 kW column diameter: 115 mm weight: 285 kg Machine height: 1840 mm NEW ALZMETALL MODEL RANGE 7 TFT - LCD display with touch function: Spindle speed setpoint Actual speed display Integrated drilling depth display with touch zero point transfer Virtual drilling depth scale in the display Machine status displays and warnings in the display Service information Selectable user language: DE / EN / FR / ES / IT / NL / RU. Furnishing: - Infinitely variable speed setting by means of an adjusting lever - automatic spindle feed with feed overload protection - Spindle protection with electrical fuse - Three separate buttons for clockwise rotation - counterclockwise rotation - stop - Mushroom pushbutton (latching) for E ...
used
bore capacity in steel (diameter): 40 mm throat: 293 mm bore stroke: 120 mm spindle taper MT: 3 column diameter: 115 mm table surface area: 514 x 360 mm spindle turning speed - stepless: 160 - 2250 U/min total power requirement: 1,0/1,6 kW weight of the machine ca.: 0,285 t dimensions of the machine ca.: m Condition: new / unused: The machine can be viewed under current.: 37981 400 V, 50 Hz, colour: light grey RAL 7035 continuous speed control, digital speed indication, push button for emergency switch off, turning switch for clockwise/counterclockwise rotation, motor protection switch, IP 54, connecting plug, finish: structure varnish, new spindle bearing, new step pulleys, belts aso. operation manual, wiring diagram. Machine has been checked in our workshop, including electr. testing report. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
Drilling capacity in St 60: 40 mm threading in St 60: M 24 mm threading in GG 20: M 30 bore stroke: 120 mm Short spindle: MK 3 throat: 293 mm column diameter: 115 mm Machine table - usable table surface: 514x360 mm T-Slots Amount - Width - Distance: 2 x 14 x 224 mm Distance spindle - machine table min./max.: 117/701 mm feed: 0,10 + 0,20 mm/U spindle turning speed range: 160-2.250 UpM total power requirement: 1,45/1,9 kW height of the machine: 1840 mm Standard equipment: - Mushroom pushbutton (latching) for EMERGENCY STOP - Reversing switch for right-left rotation - Motor protection switch - Speed adjustment stepless - Speed display digital - Feed overload protection - Protection IP 54 - Connector (fully assembled, cable length 2 m) - Spindle protection with electrical protection Pos. 25 Coolant device B, consisting of: separate container (33l), Pump with motor protection switch, complete ...
new
bore capacity in steel (diameter): 30,0 mm throat: 293 mm bore stroke: 140 mm morse taper: 3 MK table:: 514 x 360 mm turning speeds: 225 - 4.300 U/min engine output: 1,0 / 1,6 kW column diameter: 115 mm weight: 260 kg Machine height: 1.790 mm NEW ALZMETALL MODEL RANGE 7 TFT - LCD display with touch function: Spindle speed setpoint Actual speed display Integrated drilling depth display with touch zero point transfer Virtual drilling depth scale in the display Machine status displays and warnings in the display Service information Selectable user language: DE / EN / FR / ES / IT / NL / RU. Furnishing: - Infinitely variable speed setting by means of an adjusting lever - Spindle protection with electrical fuse - Three separate buttons for clockwise rotation - counterclockwise rotation - stop - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable - Right and le ...
used
: gebraucht : 2019 : 5505 : Niederlande : 2670 € : 1 : 100 x 2.000 mm : 20 - 76,1 mm : 1 : 3 kW : 190 kg The lever operated AL100U-01 can grind material from Ø 20 mm to Ø 76.1 mm. Its compound slide and carriage with rotatable clamp are continually adjustable allowing the machine to grind all pipe sections at any angle between 30° and 90°. The ALMI AL100U-01 can be used to grind square, rectangular and round pipes with a range of wall thicknesses and is suitable for all customary types of materials. ALMI’s belt tensioning system simplifies tensioning the grinding belt. The belt is tensioned using the hexagonal spanner supplied with the machine. The grinding belt can be tensioned quickly and the grinding rollers can be changed in seconds. All pipe grinders are equipped with a deburring table. Incl. 5 pcs. grinding belts, 1 pce. grinding roll Ø. 42,4 mm The data for this ad was c ...
new
: 14 mm : M 10 : MK 2 : 230-4.000 U/min. spindle stroke: 80 mm throat: 190 mm column diameter: 65 mm : 300x240 mm : 2 x 12 x 80 mm : 75/357 mm : 300x240 mm : 2 x 12 x 80 mm : 437/437 mm feed: von Hand : Handkurbel Machine height: 825 mm total power requirement: 0,7 kW weight: 83 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: 16 mm : M 12 : MK 2 : 100-2.000 U/min. spindle stroke: 80 mm throat: 190 mm column diameter: 65 mm : 300x240 mm : 2 x 12 x 80 mm : 75/357 mm : 300x240 mm : 2 x 12 x 80 mm : 437/437 mm feed: von Hand : Handkurbel Machine height: 825 mm total power requirement: 0,7 kW weight: 83 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Machine Type: Screw Air Compressor Manufacturer: Alup Type: Allegro 30/SO Year of construction: 2002 Condition: used / good Offer will only be sent if a complete imprint is provided! Price VB Location Warstein , Germany Reference M-ALU-1123-1 DESCRIPTION We offer you a used screw compressor from the manufacturer Alup. Specifications Flow rate 0.73-6.05 sqm/min Motor speed 1000-6000 Max. pressure 5-13bar Motor power 30KW Approximately 112,000 hours/device has always been serviced. Last maintenance 03/2023 Availability: from January 2024 Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions and payment terms. Errors in the descriptions an ...
used
CNC Plasma cutting table It is in good condition, located in Riga 2018
used
Used Alfa Laval decanter centrifuge model Aldec 40. New: 2007. The set includes: - decanter centrifuge - Ultromat dosing station - polymer pump - Netzsch sludge pump - centrifuge control cabinet - control cabinet of the compaction installation Technical parameters of the centrifuge: - maximum cake density 1.2 kg/dm3 - temperature 0-100 degrees C - maximum speed 4000 rpm - 2-stage planetary gear - gear max torque 2.5 kNm Gear ratio 1:159 - drum length 1460 mm - drum diameter 353 mm - cover/cover material AISI 316 - inner surface of the AISI 316 cover Centrifuge dismantled. All devices were technically efficient and in operation until dismantling.
used
Grinding diameter: Ø20 - Ø76.1 mm Grinding angle: 30º – 90º Belt speed: 30 m/s, 2800 rpm. Belt dimensions: 100 × 2000 mm Operation: Lever and manual wheel operation Included roll: Ø48.3 mm Motor: 3 kW Country of origin: Netherlands Machine LxWxH: mm Machine weight: 210 kg This machine is unused!
new
: 14 mm : M 10 : MK 2 : 230-4.000 U/min. spindle stroke: 80 mm throat: 190 mm column diameter: 65 mm : 300x240 mm : 2 x 12 x 80 mm : 75/357 mm : 300x240 mm : 2 x 12 x 80 mm : 437/437 mm feed: von Hand : Handkurbel Machine height: 825 mm total power requirement: 0,7 kW weight: 93 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: 40 mm : M 24 : M 30 : MK 4 bore stroke: 120 mm throat: 293 mm column diameter: 115 mm : 514x360 mm : 2 x 14 x 224 mm : 117/701 mm feed: 0,10 + 0,20 mm/U spindle turning speed range: 160-2.250 UpM total power requirement: 1,45/1,9 kW height of the machine: 1840 mm weight of the machine ca.: 285 kg Standard equipment: - Mushroom pushbutton (latching) for EMERGENCY STOP - Reversing switch for right-left rotation - Motor protection switch - Speed adjustment stepless - Speed display digital - Feed overload protection - Protection IP 54 - Connector (fully assembled, cable length 2 m) - Spindle protection with electrical protection The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
bore capacity in steel (diameter): 18,0 mm throat: 190 mm bore stroke: 80 mm morse taper: 2 Kurzspindel MK turning speeds: 225 - 4.300 U/min voltage: 400 / 50 Hz Volt table:: 300 x 240 mm column diameter: 65 mm engine output: 0,37 / 0,55 kW weight: 110 kg Furnishing: - Large spindle speed range - stepless speed adjustment - machined base plate - Electrically secured spindle protection - Main switch lockable with motor protection switch - Reversing switch for clockwise and counterclockwise rotation - Operating instructions in German Special accessories for an extra charge: - Base cabinet 700 x 600 x 840 mm Item no .: 09. 434, - Euro The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Item condition: maintained Availability: immediately technical data: see documents (download) The ALWID-KRONE-NV/HV is a semi-automatic filling machine, the with low vacuum (NV) or high vacuum (AGM). This allows a Filling of the same height, i.e. the filling level is identical in all containers is. In addition, the filling speed is due to the vacuum higher than with a Drop pressure filler. The ALWID-KRONE-NV/AGM is responsible for the Filling of all low to high viscosity, Suitable for still liquids (e.g. Es- Spirits, edible oils, liquid Liqueurs).
new
Machine type electrode inverter welding rectifier Brand Alphaweld Type Alphaforce E-160 Supply voltage 1 x 230 volts Adjustment range 5 – 160 amperes Duty cycle 25 % ED at 160 amps 60% ED at 100 amps 100% ED at 80 amps Current adjustment infinitely variable weldable material thickness 4 mm Cooling inverter by built-in fan Portable assembly system version Fuse 16 Ampere Dimensions L x W x H 320 x 130 x 200 mm Weight 6 kg Age 24 months Condition workshop tested, like new, incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece electrode cable 1 piece ground cable 1 piece hand shield 1 piece of glass 90 x 110 mm white 1 piece protective glass 90 x 110 mm 10 DIN 1 pair of welding gloves with cuff 1 piece slag hammer heavy version 1 piece steel wire brush 2-row 25 rod electrodes ...
new
Machine type electrode inverter welding rectifier Brand Alphaweld Type Alphaforce E-200 Supply voltage 1 x 230 volts Setting range 15 – 160 amperes Duty cycle 25 % ED at 200 amps 60% ED at 110 amps 100% ED at 100 amps Current adjustment infinitely variable weldable material thickness 5 mm Cooling inverter by built-in fan Portable assembly system version Fuse 16 Ampere Dimensions L x W x H 280 x 130 x 210 mm Weight 8 kg Age 24 months Condition workshop tested, like new, incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece electrode cable 1 piece ground cable 1 piece hand shield 1 piece of glass 90 x 110 mm white 1 piece protective glass 90 x 110 mm 10 DIN 1 pair of welding gloves with cuff 1 piece slag hammer heavy version 1 piece steel wire brush 2-row 25 rod electrodes ...
used
Box column drill Alzstar 40S 16 A 380 V Speed 160 - 2250 rpm Length 1 m Width 0.80 m Height 1.80 m Weight 270 kg Work lamp Color: White
used
Dehumidifier ALM 110 R134A 12 bar 230 V Unchecked
used
PROD. ALUP TYPE ALLEGRO110 S/N API178778 YEAR 2020 POWER (kW) 110 kw PUMP. (m3/min) 3.6-19.06 (7.0 bar) 3.72-18.3 (8.0 bar) 3.90-17.16 (9.5 bar) PRESSURE (bar) 10 HR (DOC/GENERAL) 22871 INVERTER YES
used
Manufacturer: Alup, Type: Allegro 24, Year: 2003, Schraubenkompressor: yes, Operating hours: 39280, Running idle houres: 4909, Verdichtungsenddruck bar 1: 5 - 13, Hauptläuferdrehzahl U/min 1: 2700, Antriebsleistung kW 1: 24, Volumenstrom m³/min 1: 0,76 - 3,91, Year :2003
new
bore capacity in steel (diameter): 30,0 mm throat: 293 mm bore stroke: 140 mm morse taper: 3 MK table:: 514 x 360 mm turning speeds: 225 - 4.300 U/min engine output: 1,0 / 1,6 kW column diameter: 115 mm weight: 260 kg Machine height: 1.790 mm Furnishing: - stepless speed adjustment - Reversing switch for R / L run - digital speed display - Connector and cable mounted - Spindle protection with electr. validation - 2 mtr. Connection cable with plug 16A The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
bore capacity in steel (diameter): 23,0 mm throat: 250 mm bore stroke: 100 mm morse taper: 2 MK table:: 370 x 300 mm turning speeds: 225 - 4.300 U/min engine output: 0,6/0,95 kW column diameter: 90 mm weight: 175 kg Machine height: 1770 mm Furnishing : - Mushroom pushbutton (latching) for EMERGENCY STOP - Reversing switch for clockwise and counterclockwise rotation - Motor protection switch - Infinitely variable speed adjustment - Digital speed display - Protection class IP 54 - Connection plug (fully assembled, cable length 2m) - Spindle protection with electrical fuse - Painting: DD textured paint, light gray RAL 7035, anthracite RAL 7016 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.