We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,376 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
new
sheet width: - plate thickness: - plate length: - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Alu Folding knife head 125x50x30 Speed: n= 6000 - 10300 rpm Carbide knives G&-4979-M3A6J
used
: 40 mm threading in St 60: M24 threading in GG 20: M30 : MK 3 : 160 - 2250 U/min. spindle stroke: 120 mm throat: 293 mm column diameter: 115 mm : 514 x 360 mm : 2 x 14 x 224 mm distance spindle /table: min. 117 / max. 701 mm feed: 0,1 + 0,2 mm/U height of the machine: ca. 1840 mm weight of the machine ca.: ca. 260 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Fully refurbished Hosokawa Alpine AFG 140 used system by Alpine Originals. The Hosokawa Alpine AFG fluidized bed opposed classifier jet mill is perfect for the super fine grinding of different dry materials with a precise control over the particle´s top cut thanks to its integrated classifier wheel design, using the Hosokawa Alpine Turboplex classifier head ATP. This micronizer can be used to pulverize different coarse products to finer powders and within different industries where micronization might be needed, such as minerals, chemicals, food, pharma, cosmetic, etc. This grinder is able to process hard coarse products up to approx. 10 Mohs´ hardness without much wear and reaching an extremely high end-product fineness values between d97 4 to 100 microns top size (product dependent) at the lowest possible energy consumption. The comminution takes place in the bottom part of the ...
used
Fully refurbished Hosokawa Alpine AFG 140 used system by Alpine Originals. The Hosokawa Alpine AFG fluidized bed opposed classifier jet mill is perfect for the super fine grinding of different dry materials with a precise control over the particle´s top cut thanks to its integrated classifier wheel design, using the Hosokawa Alpine Turboplex classifier head ATP. This micronizer can be used to pulverize different coarse products to finer powders and within different industries where micronization might be needed, such as minerals, chemicals, food, pharma, cosmetic, etc. This grinder is able to process hard coarse products up to approx. 10 Mohs´ hardness without much wear and reaching an extremely high end-product fineness values between d97 4 to 100 microns top size (product dependent) at the lowest possible energy consumption. The comminution takes place in the bottom part of the ...
used
This VOEST ALPINE WNC 500 S/1.6 Lathe was manufactured in 1992 in Austria. It is equipped with 2-axis (Z-travel 1715mm, X-travel 305mm), a SIEMENS SINUMERIK control. This machine stands out for its stability and is in well maintained condition with direct availabilty. See original tech specs attached.
used
This ALESA MONTI FT45TG Milling machine was manufactured in the year 1998 in Italy. It is equipped with a HEIDENHAIN TNC 430 Control unit. The milling head fixe have 2 types of spindle (horizontal and vertical).
used
Machine for the completion of insulation strip assembly Manufacturer: Aluro Type: BTM 100908-190 Year of construction: 2005 Location: Zweibrücken - Roll-in below 90° in 1 pass - Separately adjustable retaining castors - 4x2 horizontal retaining castors at the top and bottom with Vulkollan coated surfaces - Correction for the straight alignment of the profiles - Stop with safety switch - Display of position and pressure with display, correction of mechanical deformation after roll-in We will be happy to send you further information on request.
used
bore capacity in steel (diameter): 32 mm throat: 295 mm bore stroke: 160 mm spindle turning speed - stepless: 110 - 2900 U/min column diameter: 115 mm table-size: 400 x 300 mm spindle taper MT: 3 bore capacity in cast iron: 40 mm total power requirement: 1,2 kW weight of the machine ca.: 330 kg dimensions of the machine ca.: 700 x 900 x 1850 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
feed pressure: . bar coolant capacity: . l Expansion Range: . mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Rental Multiprocess System in wear protected design. Stand-alone lab scale grinding and classifying plant. This compact plug-and-play system is perfect for Research and Development (R&D) and small-scale productions. It operates in small batches of a few kilos. The system can be fitted with different modules (one at a time) to either grind or classify different products, both coars ...
used
turning diameter over bed: 330 mm turning diameter over slide rest: 190 mm centre distance: 650 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m turning length: mm 4-jaw chuck Multifix tool holder device tail stock coolant device Technische Daten / technical details: Spitzenweite / center to center 650 mm Dreh-Ø über Bett / turning diameter over bed 330 mm Dreh-Ø über Schlitten / turning diameter over sledge 190 mm Spindelbohrung / spindle hole 36 mm Drehzahlbereich / spindle speed 30-2500 UpM /rpm Antriebsleistung / drive capacity 2,2 kW Gewicht der Maschine ca. / weight ca. 600 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
turning diameter over bed: 330 mm turning diameter over slide rest: 190 mm centre distance: 650 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m turning length: mm 3-jaw chuck Multifix tool holder device tail stock coolant device Technische Daten / technical details: Spitzenweite / center to center 650 mm Dreh-Ø über Bett / turning diameter over bed 330 mm Dreh-Ø über Schlitten / turning diameter over sledge 190 mm Spindelbohrung / spindle hole 36 mm Drehzahlbereich / spindle speed 30-2500 UpM /rpm Antriebsleistung / drive capacity 2,2 kW Gewicht der Maschine ca. / weight ca. 600 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Following separator available for sale. Make: ALFA LAVAL Type: WHPX 505 TGD 24-60 Serial Number: 2993137 RPM: 1700-1800 r/m ,142-150 Product No.: 881002 Machine Topper No.: 537245-80 Bowl No.: 537170-80 Machine Bottom part: 540224-04 MOTOR Make: Made in Italy No.: 17019 19Z Volt: 440 HZ: 60 KW: 4.2 RPM: 1720
new
bore capacity in steel St 60: 25 mm Drilling capacity in St 60: 30 mm threading in St 60: M 16 : M 20 Short spindle: MK 3 spindle stroke: 140 mm throat: 293 mm column diameter: 115 mm Machine table - usable table surface: 514x360 mm T-Slots Amount - Width - Distance: 2x14x224 mm distance spindle - column min./max.: 132/724 mm feed: von Hand 0: stufenlos Spindle Speed: 225-4300 U/min. engine: 1,0/1,6 kW voltage: 400 V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
ALLMATIC LC 160/200
new
Available in stock 1 x Alfa-Laval Solenoid Valve Block (1763524-80). The equipment was NEVER USED.
used
Nautical vacuum dryer Nautical vacuum dryer Hosokawa Alpine
new
bore capacity in steel (diameter): 55,0 mm throat: 300 mm bore stroke: 140 mm morse taper: 4 MK table:: 615 x 430 mm turning speeds: 70 - 1.200 U/min engine output: 1,8 / 2,9 kW column diameter: 145 mm thread: M30 ST60 thread: M36 GG20 feed: 0,10 + 0,30 mm/U weight: 380 kg Machine height: 1850 mm NEW ALZMETALL MODEL RANGE 7 TFT - LCD display with touch function: Spindle speed setpoint Actual speed display Integrated drilling depth display with touch zero point transfer Virtual drilling depth scale in the display Machine status displays and warnings in the display Service information Selectable user language: DE / EN / FR / ES / IT / NL / RU. Furnishing: - Thread cutting device for thread cutting with a stop max. 6 threads / min (thread cutting performance depends on the spindle speed) Thread depth adjustable via depth stop in the TFT - LCD display (3 tools). - automatic spi ...
new
bore capacity in steel (diameter): 34,0 mm throat: 300 mm bore stroke: 160 mm morse taper: 4 MK table:: 615 x 430 mm turning speeds: 100 - 1.800 U/min engine output: 1,4 / 2,2 kW column diameter: 145 mm thread: M24 ST60 thread: M30 GG20 feed: 0,1-0,2-0,3-0,4 mm/U weight: 470 kg Machine height: 1865 mm NEW ALZMETALL MODEL RANGE 7 TFT - LCD display with touch function: Spindle speed setpoint Actual speed display Integrated drilling depth display with touch zero point transfer Virtual drilling depth scale in the display Machine status displays and warnings in the display Service information Selectable user language: DE / EN / FR / ES / IT / NL / RU. Furnishing: - Thread cutting device for thread cutting with a stop max. 6 threads / min (thread cutting performance depends on the spindle speed) Thread depth adjustable via depth stop in the TFT - LCD display (3 tools). - Infinite ...
new
bore capacity in steel (diameter): 40,0 mm throat: 293 mm bore stroke: 120 mm morse taper: 3 MK table:: 514 x 360 mm turning speeds: 80 - 1.125 U/min engine output: 1,0 / 1,6 kW column diameter: 115 mm thread: M24 ST60 thread: M30 GG20 feed: 0,10 + 0,20 mm/U weight: 270 kg Machine height: 1840 mm NEW ALZMETALL MODEL RANGE 7 TFT - LCD display with touch function: Spindle speed setpoint Actual speed display Integrated drilling depth display with touch zero point transfer Virtual drilling depth scale in the display Machine status displays and warnings in the display Service information Selectable user language: DE / EN / FR / ES / IT / NL / RU. Furnishing: - Thread cutting device for thread cutting with a stop max. 6 threads / min (thread cutting performance depends on the spindle speed) Thread depth adjustable via depth stop in the TFT - LCD display (3 tools). - Infinitely va ...
new
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
used
Description load capacity: 150 kg minimum weight: 2.5 kg division: 50 gr weighing surface dimensions 750 x 870 mm
used
Description Oil thermoregulator Max Temperature: 150°C Heating Power: 3Kw Tank capacity: 5 L
used
ALFA LAVAL QMRKX 517 SGV 34C 50 Quark Separator | Controls | Tools| Water System | Manuals | Capacity : 2000 kg/hr | Condition : Good | Available : Immediately Contact us for more information
used
Technical description : - RAPID ACTION DOOR - Height = 2000mm - Width = 1800mm
used
Technical description : - RAPID ACTION DOOR - Height = 2000mm - Width = 2000mm
used
Screening machine Allis Chalmers Type 12/40-2 4000 x 1200 mm – 2 decks
used
used
Used and in very good condition Alfa Laval BCD E905BD P SW CBP air cooled condensor. Complete with 10 fans from Ziehl-Abegg designed for 60ºC, 50/60 Hz - 0,68 kW - 570 RPM - diameter Ø 910 mm. Capacity at delta 598,8 kW and 169.200 m³/h. Capacity at Y 519,5 kW and 135.400 m³/h. Specifications: Our internal stock No. 12244 Brand Alfa Laval Type BCD E905BD P SW CBP Product type Air Cooled Condensor kW 598,8 (Freon) Number of Fans 10 RPM of the Fans 570 Air Flow in m³/h 169.200 diameter fans Ø 910 mm Surface (m2) 2.286 Tube volume 200,5 dm³ Sizes 9230x2300x1400 mm Weight 1.662 kg Remarks | y.o.b. 2016 Amount in stock 1
used
used
used
used
DECAPPER 4 HEADS Brand: Alca Impianti Year: 2007 Speed : 1.500 boxes/h Machine suitable for boxes: 4x3 and 5x4 Safety protections
used
Labelling machine ALFA 8T-2S-2E – Adhesive Year of full recondition: 2008 Counterclockwise direction Speed: 8.000 bph Rotative carousel with 8 heads N°2 adhesive labelling station ETIPACK to apply front and back label Safety Protections
used
Blending apparatus with 4 blending lanterns and control cabinet, Additional title: 4 blending lanterns, Operation / Control: Siemens parts, Base construction: on 4 wheels, Features: 4 blending lanterns, control cabinet mounted on the frame , Code: 5278
used
Max. rotational speed: 7500/min.
used
Rotational speed: 60-1200/min, chain: A3/ 26V.
used
Length: 800mm, width: 600mm, height: 2000mm, weight: 825kg.
used
Drilling capacity steel/ cast iron: 35/45mm, length: 1100mm, width: 600mm, height: 2050mm.
used
Connected load: 76kW, controls: HEIDENHAIN, without tool changer.
used
Working diameter: 95-150mm, rotational speed: 2250-6000/min.
used
3 pcs. Pfeiffer Balzers TPU 170 (turbomolecular pump) 3 pcs. Pfeiffer Balzers TCP 120 (controller for TPU 170) 3 pcs. cable for TPU 170 1 pcs. Alcatel Type 5150 (turbomolecular pump) 1 Alcatel CFF 100 (controller for type 5150) 1 Alcatel 5030 CP (turbomolecular pump) Price plus 19% VAT Not tested for functionality. Please see photos for technical data. Can also be picked up.
used
Ingot dimensions: 830x830x250mm, max. load: 400kg, max. operating temperature: 1570°C.
used
Alpine pin mill Z 400, grinding disc diameter 400 mm, new pin set, without motor
used
Bottling line ALFATEK ELVIRA SV-LP 6.6.6.1 Year: 2016 Speed: 1.000 bph Direction: Clockwise Monoblock composed of: Blower 6 clamps Filler 6 valves Filler 6 valves for oli Corker single head screw cap labeller ENOS linear Label on body Single head for pvc capsules Single head for polylaminate capsules Safety protections.
used
bottling line – 3.000 bph Speed: 3.500 bph Rinser COSTEC SF/20/0/150 – 1996 Fixed nozzle Single treatment Premix CEM HL 60 – 1996 Filler ALFATEK 32 ISO – 1996 32 valves - isobaric Corker AROL SATURNO/R – 1996 3 heads – natural straight cork Pasteurizer PADOVAN termosteril 5.000 L/H – 1996 Capsuling machine ROBINO&GALANDRINO FENIX 2 – 1996 Labeller CAVAGNINO&GATTI CG84DR.3.11 – 1996 Box forming machine MONDO&SCAGLIONE 376/C – 1996 Case packer MONDO&SCAGLIONE M11 – 3/3 – 1996 Box closing machine MONDO&SCAGLIONE CRCE – 1996 Line tapes. Safety protections.
used
bottling line – ALFATEK Year: 1994 Speed: 2.000 bph Direction: Clockwise Rinser 12 clamps Double treatment Filler 15 valves Gravity filling Single head corker Natural straight cork Safety protections
used
Bottling Line ALFATEK – 3.600 bph Year: 1996 – 2009 Speed: 3.600 bph Direction: Clockwsie Used rinser KOMPASS Year: 2009 Speed: 5.000 bph Direction: Clockwsie 20 clamps Fixed nozzle Single treatment Filling monoblock ALFATEK 24.4 Year: 2003 Speed: 4.000 bph Direction: Clockwsie Filler 24 valves Corker 4 heads – Natural straight cork Labeller NEWTEC 9T Year: 2015 Speed: 6.000 bph Direction: Clockwise Nr.2 cold glue stations Nr.1 adhesive station Box forming machine APE Year: 1996 Speed: 900 C/H Gluer NORDSON Case packer APE Year: 1996 Speed: 3.600 bph Box closing machine SIAT Year: 1996