air used for sale

PSM / 900mm Biological Safety Station ESCO AIRSTREAM AC2-3E8 Material in excellent condition Year of manufacture: 2020 Complete package including: PSM ESCO Airstrem class II AC2-3E8 length 90cm (0.9m) A fixed support, base with levelling feet 2 internal sockets Type: Microbiological Safety Station Protection: Product + Person + Environment Width: 900mm Opening system: Manual sliding glass Flow Technique: PSM Initial Airflow Speed (m/s): Intake: 0.45 / Downward: 0.30 External dimensions: 1035 x 753 x 1400 mm (W x D x H) Internal dimensions: 915 x 580 x 654 mm (W x D x H) Weight: 191 kg (excluding base) Model: AC2-3E8 Air volume: Inlet: 258.2 m3/h / Downhill: 552.2 m3/h / Exhaust: 258.2 m3/h

Reference Num.: 3551 Brand: Rosenberg Type: Airbox A20-07 Available: directly Status: In production Location: Deutschland Equipment: - Luftmenge: 600 m3/h

A mobile welding fume extraction unit Schmidt & Kranz is available. Air flow rate: approx. 1800m³/h, power: 1.5kW. An on-site inspection is possible.

: 400 V / 50 Hz : < 75 dB(A) power capacity: 15 kW volume capacity: 20.000 m³/h weight: 1590 kg Modular plug & play airtower for hall extraction of welding fumes with integrated, soundproofed Fan, automatic, differential pressure controlled Filter cleaning, system control with color display, particle pre-separation and IFA - tested filter cartridges. The system is for a volume flow of average 20,000 m³ / h designed 1st filter stage - main filter: Filter area: 222 m² Number of filters: 6 pieces Dust class according to DIN EN 60335-2-69: M. Degree of separation:> 99.9% Cleaning: Jet - Pulse Compressed air connection: NW 7.2 mm, 4-6 bar, oil and water free 2nd filter stage - fine dust filter. Filter area: 65 m² Filter class according to ISO 16890: ISO ePM1 80% 3rd filter stage - Synthetic fiber mats: Filter area: 8 m² Filter class according to ISO 16890: ISO coarse 60% Total filter are ...

Description Weber – Bluhm label printing & dispensing system Leg i-Air 4050E-30-RH-2E542-RO90_312-CC from 07/2018 Basic system Legi-Air 40508-CC on K-tripod spindle Rol+Tel Gr2 incl. – vacuum shut-off – digital l/O interface – compressed air monitoring and shutdown – sensor label on stamp – label end of roll warning – 2-stage vacuum – U-arm – terminal terminal – multilingual text display – label large roll unwinding up to 450m running length – design: right / right hand – Pressure module: Zebra 2E500 # 4#-200 dpi – Applicator: rotating stroke 90" – 312mm arm length -RO90_312

AIRCOOLED CHILLER SYSTEMAIR SYSCROLL 240 AIR CO E COAT 238.1 KW Cooling capacity: 238.1 kW / 67.7 tons (12/7 — 35°C) Year of manufacture: 2017 Options: Hydraulic module. Refrigerant circuit: 2 pcs. Heat exchanger: Plate Condenser: Microchannel, Aluminum Compressors: 1 pcs. Bitzer GSD80385VAB4-2 (scroll) + 2 pcs. Bitzer GSD80295VAB4-2 (scroll) Type of refrigerant: R410A Number of fans: 4 pcs. Hydraulic module: 1 pcs. water pump Wilo IPL65/130(136)-5.5/2-ERCD, expansion vessel. Dimensions: 3.54x2.18x2.5 m Weight: 1786 kg Working hours: 321/627/618 h. Condition: Good

Polar Mohr RA-4 jogger with air removal - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Polar Mohr RA-4 jogger with air removal Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers Laminators Offset printing machinery Others Paper drills Perfect binders Pile turners Spare parts Stitching machines Polar Mohr RA-4 jogger with air removal Price: 14000 EUR Download PDF Polar Mohr RA-4 jogger with air removal Machine in perfect condition, practically unused. This is the latest design from a German manufacturer. Technical data: Max format: B1+ Stack height: 150mm Weight: 550kg Power supply: 400V Air squeezing roller Air table possibility of shaking to the right/left adjustable angle of inclination Adjustable shaki ...

Airpad Fromm AP502 - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Airpad Fromm AP502 Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers Laminators Offset printing machinery Others Paper drills Perfect binders Pile turners Spare parts Stitching machines Airpad Fromm AP502 Price: 4500 EUR Download PDF Airpad Fromm AP502 Perfect condition, ready to work. Compact and easy to use, the Airpad AP502 produces protective padding material. No operator needed – just one button press. Pre-programmed programs for the production of airbags of various sizes. Changing the program by pressing a button. Weight: 228 kg Year of production 2018. Ask About The Product Name (required) Company name Email (required) Phone Messa ...

Mini Pak'r Air Cushion Machine - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Mini Pak’r Air Cushion Machine Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers Laminators Offset printing machinery Others Paper drills Perfect binders Pile turners Spare parts Stitching machines Mini Pak’r Air Cushion Machine Price: 500 EUR Download PDF Mini Pak’r Air Cushion Machine The machine creates air-inflated fillings from the foil sleeve. 230V power supply Weight about 6 kg. Ask About The Product Name (required) Company name Email (required) Phone Message (required) Newsletter Do not miss the new products in our stock. Subscribe to our newsletter to receive information from us about product news, promotions and ...

Air pillow packaging machine Air Space 9000 - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Air pillow packaging machine Air Space 9000 Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers Laminators Offset printing machinery Others Paper drills Perfect binders Pile turners Spare parts Stitching machines Air pillow packaging machine Air Space 9000 Price: 800 EUR Download PDF Air pillow packaging machine Air Space 9000 The machine creates air-inflated fillings from the foil sleeve. 230V power supply Weight about 100 kg. Ask About The Product Name (required) Company name Email (required) Phone Message (required) Newsletter Do not miss the new products in our stock. Subscribe to our newsletter to receive inform ...

Panel thickness: 8 - 50 mm Thickness of the edges: 0,4- 3 mm Feed speed 8 - 11 m / min PU pressure rollers Equipment: Squaring unit, 2 motors 2,2 kW Panel edge heating Edge magazine for coil and strips Hot melt application with roller Airtec AT4510 unit The Airtec aggregate is positioned so you can use Airtec or the standard glue pot Motorized side pressure unit End trims, 2 motors, pneumatic positioning straight and with chamfer trimming unit above / below Contour trimming unit Profile scraping unit Glue scraping unit Polishing unit Detergent spray system central lubrication

Manufacturer: Durst Type: D-SLK 12 Diagonal, AIRSEC Vario 1/2 Year of manufacture: 2008 Heating medium: liquid gas propane, gas blower burner for natural gas E Dimensions - Spray cabin interior: 4000 x 2400 x 2550 mm - Container exterior overall: 6000 x 2500 x 2800 mm - Aggregate room interior: 2400 x 1850 x 2300 mm Air Performance - Fresh air supply: up to 10000 cubic meters per hour, motor rating 2.2 kW - Exhaust air: up to 10000 cubic meters per hour, motor rating 2.2 kW - Air change rate: up to 408 times per hour - Exhaust discharge velocity: approximately 14.1 to 17 m per second Heating - Maximum heating output: 90 kW - Maximum circulating air temperature for drying: up to 75 to 80 degrees C - Average annual natural gas consumption: approximately 3.4 Nm3 per hour - Maximum consumption at 90 kW: approximately 9.5 Nm3 per hour Filtration - Pre-filter: bag filter, filter cla ...

Aircooled chiller/Heat pump SYSTEMAIR SYSCROLL 20 AIR EVO HP 20 kW/20 kW Cooling capacity: 20 kW / 5.69 tons (12/7 — 35°C) Heating capacity: 20 kW / 5.69 tons (40/45 —7°C) Year of manufacture: 2014 Options: Heat pump. Hydraulic module Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 1 pcs. Mitsubishi ANB42FPJMT (scroll, inverter) Type of refrigerant: R410a Number of fans: 2 pcs. Hydraulic module: 1 pcs. water pump EBARA matrix 5-2T/0,45 COIB, buffer tank 112 l. Dimensions: 0.51x1.48x2.01 m. Weight: 266 kg. Condition: Good

An oil-lubricated screw compressor AiRKO is offered. Motor power: 7.5kW, Motor speed: 3000rpm, Volume flow: 1.02m³/min, Max. operating pressure: 10bar. Viewing possible by prior arrangement.

Kaeser Aircenter SX 6 Screw Compressor RA2515 Technical Specifications: Item No.: 100875.1 Serial No.: 1087 Year of Manufacture: 2012 Rated Power: 4.0 kW Motor Speed: 2910 rpm Max. operating pressure: 8.0 bar Ambient temperature: 3–45°C Tank capacity: 200 L Flow rate: 600 L/min @ 7.5 bar Price: plus sales tax, ex works from the central warehouse of Dr. Sonntag GmbH & Co. KG, 97076 Würzburg Features: Construction year: 2012 KW: 4,0 Tank capacity [l]: 200 Flow rate [l@bar]: 600@7,5 Max. operating pressure [bar]: 8,0 Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intra ...

A Kaeser rotary screw compressor requiring repair with a defective refrigeration dryer is offered. Power: 7.5kW, max. operating pressure: 7.5bar, refrigeration dryer: TU11, refrigerant: R134a, refrigerant charge: 0.490kg. Dimensions X/Y/Z: approx. 680mm/780mm/1300mm, weight: approx. 270kg. Inspection by appointment possible.

Manufacturer: AIRCO Model: AIRCO PSAL 15 SN, generation unit INMATEC IMT-PN 1550 Type of machine: Nitrogen generation plant Year of manufacture: 2018 Condition: Operational Key specifications: Documented N2 purity of 98.9 percent. Integrated Bauer high-pressure booster, year 2020. Integrated Bauer refrigerant dryer for compressed air and nitrogen supply. Maintenance: Serviced annually. Last service October 2025. Proof of function available. Included accessories: -  Nitrogen bundle section - Pressure reducer components - Fine filter components - Hose package. Find more here - / Contact us at -

After cooking stove, thermal oil, Formcook, frying line (CFS, GEA, Koppens, Alco, Stork) - continuous grilling line - Total length outside: 6 m - Total width: approx. 1.300 mm - Height of the gallows: 1.200 mm - Gallows for chain hoist - 5 floors above each other - Conveyor belt of wire belt: 600 / 2,35 / 7 / 12,7 - Double-walled floor and hood, isolated

After cooking stove, thermal oil, Formcook, frying line (CFS, GEA, Koppens, Alco, Stork) - serial: Sprematec - length: approx. 10 m - width: 1350 mm inside / 1518 mm outdoor - heated thermal oil - year: 10/2003

Screw Compressor WORTHINGTON - CREYSSENSAC Type Rollair 40 -- RLR 40BM6Fabr. No. 6240330200 built in 2003Volume flow rate 4.6 m3/min. Pressure capacity 10 barMotor power main motor 30 kWNe-connection 400 Volt, 50 HzConnection thread 1 1/2 inch- 36004 Switch-on hours read- 19256 load hours read- SoundproofedSpace requirement L x W x H 1850 x 1050 x 1760 mmWeight 910 kggood condition; used

Screw compressor KAESER type BS 50Fabr. No. 402852 built in 1990Volume flow 5 m³/min. Pressure capacity 7.5 barEngine power main motor 30 kWNet connection 400 volts, 50 HzConnection thread 1 1/2 inches- 1107.90Operating hours read- 749.00 load hours read- SoundproofSpace requirement L x W x H 1600 x 1070 x 1350 mmWeight 900 kgvery good conditionWas a reserve compressor and has only a few operating hours; used

Double diaphragm pump with air drive DEPA type DH40-FA-ZRTDreactive air diaphragm pump, double pumpSeries No.: B1802498 year of construction 09.05.2018Temperature: max. 130CBau size: 40Grain size: max. 16 mmSuction height: approx. 2 mSuction height product filled: approx. 9 mOperating pressure: max. 7 barAir connection: 3/8Suction connection: 1 1/2Pressure connection: 1 1/2- self-priming- Aluminium housing- Diaphragm plate made of stainless steel- Diaphragm made of nopped E4® PTFE- Balls made of PTFE- Ball seats made of stainless steelSpace required: L x W x H: 370 x

Double diaphragm pump with compressed air drive DEPA type DH50-FA-ZRTDoduct diaphragm pump, double pumpSeries No.: B1600416 year of construction 26.01.2016Temperature: max. 130CBausize: 50Grain size: max. 18 mmSuction height: approx. 2 mSuction height product filled: approx. 9 mOperating pressure: max. 7 barAir connection: 3/4Suction connection: 2Pressure connection: 2- self-priming- Aluminium housing- Diaphragm plate made of stainless steel- Diaphragm made of nopped E4® PTFE Composite balls made of PTFE- Ball seats made of stainless steelSpace required: L x W x H 550 x 350 x

Filter system, air conditioning unit, air conditioning, fan, ventilator, electric motor, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan, axial fan, axial fan, axial fan, axial fan -Filter unit (from an air conditioning system) -Manufacturer: Wolf -Type: KG Top 4040 -Power: Fan 4x 5.0 kW -Volume flow: 47000 m³/h -Dimensions: 2950/2800/H2800 mm -Weight: 1400 kg

Stock# UG6400 Used set of air compressor by Kaeser model FSG520-2W with air dryer by Hybritec type Compact model DTI 668/902. Compressor details: Power consumption: 355 kW Water cooled. Working output pressure up to 10 bar. Flow output: 50.00 m3/min Shipping dims: 3190 mm x 2095 mm x 2125 mm x weight 5900 kg Dryer details: Hybritec Compact model DTI 668/902. air flow - up to 66.7 m3/min Working pressure 5/10 bar Power consumption: 34.5 kW

ATLAS COPCO GA 5 FF – Screw Compressor General data: Manufacturer: Atlas Copco Model: GA 5 FF Machine type: Screw compressor with integrated air dryer and air receiver Year of manufacture: 2003 Operating hours: approx. 38000 h Condition: Serviced by Atlas Copco Service history: Available Technical details: Rated power: 5.5 kW Working pressure: 8.5 bar Dimensions: Approx. 1200 x 800 x 2100 mm (including packaging) Description: Industrial screw compressor Atlas Copco GA 5 FF equipped with integrated air dryer and air receiver. Designed for reliable compressed air supply in workshop and industrial environments, offering efficient operation and compact design. Auction-ID: A7-48891-4

Type: Oil-free piston compressor Model: Kaeser AIRBOX CENTRE 550 with integrated dryer & air receiver Rated power: 3 kW Air flow: 255 l/min Max. pressure: 10 bar Working hours: 2811 h (2533 h under load) YoM: 2014 Pump: Replaced with new unit in 2021 Last service: Kaeser C-Service on 06.10.2022 Maintenance: Regularly serviced Features: Integrated dryer, receiver tank, IE3 motor, refrigeration dryer (dew point +5 °C), oil-free operation Dimensions (D x W x H): 1730 x 820 x 1640 mm Weight: 550 kg ⚠️ Service manual not available. Please view the test video linked with the lot. Auction-ID: A7-48891-8

Vertical cylindrical stainless steel tank, mounted on legs (140cm diameter, 170cm height), FLYGT pump, sold with 6-blade helical axial fan and grate Auction-ID: A1-48931-4

Water cooler, ruck cooler GEA, 400-600KW.with radial fan, suitable for air duct as heating or to blow into the open.

Material: steel Engine 11 kW Very good condition. You can also get the entire system with all components.

Air-cooled liquefaction kit Bitzer without compressor,Type LH135/F302H, New, Base plate with condenser and collector

Air pressure-done piston pump aerial entrance pressure max. 8 cash Max Materialvolumenstrom Materialvolumenstrom materialvolumenstrom 4.5 l / min. translation 30:1 224 cash material temperature max. 90°C high-grade steel execution (changes and mistakes in the technical data, information and prices as well as intersales reserve!)

Air dryer Mobile for 17-24 Nqm/h 219W.

Full stainless steel heat exchanger in round shape. Previous use: heating air with steam. Suitable for heating or cooling aggressive gases/air.

Blacksmith hammer / air hammer Zeva machines 16 bear Air / forging hammer 16 bear Max 250 strokes/min Working cylinder diameter 90 mm Stroke approx. 170 mm CLOUT approx. 16 bear Anvil is connected to machine Ambosswerzeug can be changed CLOUT and Geschwindegkeit can be controlled with foot switch and hand 1.5 KW, 250 kg If you are interested in air hammers with 25Baer, 40Baer, 55Baer and 75Baer write me a short message!

Various varieties in stock

Ready to ship

Biological exhaust air purifier for odour removal, exhaust air treatment, bio-air purifiers, biofilters, air scrubbers used The exhaust air filter can be used for odour disposal in wastewater treatment, waste management, oil mills and malthouses, biogas plants, landfill degassing, carcass recycling plants and slaughterhouses. The exhaust air is first passed through an air scrubber / humidifier and then through the biofilter material. There, the unened odours are neutralized. Manufacturer S&H GmbH & Co. Umweltengineering KG Year of construction probably 2006 Dimensions: approx. 10.5 m x 10.5 m + 2.5 x 5 m Surface filter 9 x 9 m (internal dimension) Filter material: 149 m3 biomix and 24 m3 oak wood Bulk height 2.14 m The side walls are made of PE panels with support made of galvanized steel. The filter was installed in a biogas plant. We also have other components of the s ...

Attachment: Schneider air compressor Compressor: UNM STV 460-10-200 t no.: T800-140 Suction power: 460 l / min EFF. Quantity: 375 l / min Final compression pressure: 10 bar Rated motor power: 3 kW Voltage: 400 v Frequency: 50 Hz Year of construction: 2008 Condition: mint condition - very good

Air starter Part no. 218006

Dynamic airflow separator (sifter) for minerals, cement, recycling etc., rotor diameter: 700 mm, turbine wheel occupied with 64 blades / turbine blades, outer ring occupied with 36 manually adjustable counter wings, incl. drive. In very good condition.

Stationary air compressor Lutos DI 70-4 Oil-free Efficiency 3100 rpm 90 kW Weight 410 kg Ask for an offer iNTER-WiBA Sp.J. UL. Krakowska 263 PL 43-305 Bielsko-Biała USt-IdNr.: PL547-17-47-669 Tel. 0048/33 812 58 60 fax. 0048/33 812 58 36 abc.inter-wiba.com.pl info@inter-wiba.com.pl

Make : Wolf Type: WLE-S-180 Built: 1993 Dimensions: 1.3 m x 2.2 m x 2.6 m (approx. WxLxH) Heating unit: 209 kW Burner : Gas burner Dry temperature: max. 80 degrees C Circulating air unit: 14,000 m3/h; 7.5 kW; 1435 rpm Location : Camp Herzogenaurach Sales price: € 2,990,- net, from location This plant is already on sale, similar we have in stock. We have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please contact us, tel. 0171-9508841.

All prices are from Station Germany. All follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical data are owner, manufacturer or operator information and therefore non-binding for us. Customer protection is agreed between the parties. Place of jurisdiction Germany. All agreements are made in accordance with German law. Customer protection agreed after ICC Paris Intermediate sale, other use, exploitation and error are expressly reserved.

Cover for charge air cooler MWM 620 RECON Part number: 1214 1951 Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us

RECON Part number: 1203-1208 / 1213 6626 / 1230 6642 / 1213 6625 Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us

Stock number U1984-2 Used impact dryer for pellet by RIETER (Germany) model AERO 500 in stainless steel design (material 1.4541, AISI 321). Dryer is equipped with air blower providing 90 m3/min and driven by electric motor with power 18.5 kW. Dryer has reported output 4000 kg/h of outgoing product. Flow rate of water with pellet: 35 m3/h (maximal), 25 m3/h (nominal) and 20 m3/h (minimal). Nowadays machine has installed screens with mesh 1.2 mm. Machine new 1997. Shipping dimensions of dryer: width 1400 mm x length 3830 mm x height 2265 mm. Weight of machine – 700 kg. Body of drying chamber is sound-muffled. Technical documentation included in german language. Machine had been working on PP pellet.