air used for sale

Stahlkaiser automatic hose reel for compressed air 15 meters auto stop function, maximum 900 PSI diameter 3/8\", connection 3/8\"With automatic reel stop, unlocked by briefly pulling the hose, swivel holder, for wall mounting, with mounting bracket. in box Auction-ID: A1-40421-332

IN WORKING CONDITION. TESTED FOR FUNCTION. There is no right of withdrawal.See the Auction Terms and Conditions for more information. The minimum age for visiting the viewing and collection days is 18 years. Visitors must be able to identify themselves. A forklift is available during the collection day. The maximum lifting capacity is 3 tonnes. Use of the forklift truck is entirely at your own risk. In addition, waiting times may occur. All irregularities and signs of wear may not be clearly visible on the images. It is strongly recommended that you take advantage of the viewing day to personally inspect and assess the condition and appearance of the lot. Auction-ID: A7-49784-30

equipped with Boge DS4-2 air dryer; BWB steel pressure vessel capacity 90 liters; Auction-ID: A1-44050-51

\" General Description Single-seat recreational hovercraft of custom or amateur-built construction. The craft features an enclosed cockpit, rear ducted propulsion fan, fiberglass hull and three-blade composite propeller. Mounted on a road trailer, it is designed for amphibious operation over land and water using an air-cushion lift system. Technical Details Manufacturer: Unknown Model: Unknown Vehicle type: Recreational hovercraft Identification No.: AU-WWA189378 (NSW Transport) Engine: Petrol (make and model unknown) Seats: 1 Fiberglass hull Three-blade composite propeller Enclosed cockpit Digital engine display and instrumentation Trailer included Condition Good cosmetic condition. Hull appears straight with fresh paint, intact cockpit glazing, complete controls, undamaged propeller and duct assembly. Engine instrumentation is installed and the trailer is included. E ...

Total dimensions approx. 800 × 1350 × 1650 mm operating pressure 12.75 bar power 30 kW Auction-ID: A7-50524-916

Dimensions approx. 900 1950 × 1850 mm operating pressure 9.75 bar power 30 kW Auction-ID: A7-50524-917

Connected load: 400 V Refrigerant: 95g / R134a Compressed air supply: 5-8 bar Printer: Star DP8340S Auction-ID: A1-50529-11

3.02 kW; refrigerant,R410A; with 1x OWS 225 oil separator; 1x setup with 6x filter; 1x Grassair compressed air tank 2000 liters; entirely on mezzanine floor Auction-ID: A1-49889-39

Composed of Chiller DOMINO HP XEA 165 Z H LN B2 CODIVARI Boiler Structure and piping SCHNEIDER control panel To be repaired, a quote of € 3,500.00 available Auction-ID: A7-50524-935

Composition for buffet air and breakfast distribution consisting of wooden counters and furniture with granite tops, equipped buffet elements, service furniture, sideboards, trolleys Auction-ID: A1-49895-85

flue capacity: 125 kW; Conventional yeld capacity: 99 kW; flue diameter: 180 mm; hot air delivery pipes: 2 x 250 mm; flue length: 750 mm; oven width: 560 mm; oven hight: 700mm; air flow: 6300m³/h; power consumption: 1500W; aproximate surface to heat up: 1500m³; area to be heated: 300/350 m²; heater height without hot air conveying pipes: 1980 mm; heater width: 800 mm; heater length: 1280 mm; weight: 415 kg; Horizontal oven made of thermal chrome plated stainless steel, reinforced with ribs. Exchangers 2 or 3 smoke revs. Inner side made of bright sheet metal for casing and insulation. Outer side made of zinc plated sheet metal. Frame made of painted profile. Feeding doors with refractory and extractable grates. Panels with refractory for pipes cleaning. Double suction centrifugal fans for hot air delivery running at low regime of turns and arranged on special elastic  ...

flue capacity: 510 kW; Conventional yeld capacity: 407 kW; flue diameter: 250 mm; hot air delivery pipes: 4 x 350 mm; flue length: 1900 mm; oven width: 900 mm; oven hight: 900 mm; air flow: 26000 m³/h; power consumption: 4500 W; aproximate surface to heat up: 8000 m³; area to be heated: 1800 m²; heater height without hot air conveying pipes: 3000 mm; heater width: 1220 mm; heater length: 2700 mm; weight: 1575 kg; Horizontal oven made of thermal chrome plated stainless steel, reinforced with ribs. Exchangers 2 or 3 smoke revs. Inner side made of bright sheet metal for casing and insulation. Outer side made of zinc plated sheet metal. Frame made of painted profile. Feeding doors with refractory and extractable grates. Panels with refractory for pipes cleaning. Double suction centrifugal fans for hot air delivery running at low regime of turns and arranged on special el ...

flue capacity: 175 kW; Conventional yeld capacity: 140 kW; flue diameter: 200 mm; hot air delivery pipes: 3 x 250 mm; flue length: 950 mm; oven width: 600 mm; oven hight: 860 mm; air flow: 6300 m³/h; power consumption: 8900 W; aproximate surface to heat up: 2200 m³; area to be heated: 500/600 m²; heater height without hot air conveying pipes: 2200 mm; heater width: 930 mm; heater length: 1700 mm; weight: 615 kg; Horizontal oven made of thermal chrome plated stainless steel, reinforced with ribs. Exchangers 2 or 3 smoke revs. Inner side made of bright sheet metal for casing and insulation. Outer side made of zinc plated sheet metal. Frame made of painted profile. Feeding doors with refractory and extractable grates. Panels with refractory for pipes cleaning. Double suction centrifugal fans for hot air delivery running at low regime of turns and arranged on special ela ...

flue capacity: 350 kW; Conventional yeld capacity: 279 kW; flue diameter: 200 mm; hot air delivery pipes: 3 x 300 mm; flue length: 1200 mm; oven width: 740 mm; oven hight: 1040 mm; air flow: 17800 m³/h; power consumption hot air fan: 3 kW; power consumption flue gas exhaust: 600 W; aproximate surface to heat up: 5000 m³; area to be heated: 1000 m²; heater height without hot air conveying pipes: 2500 mm; heater width: 1100 mm; heater length: 1900 mm; weight: 850 kg; Horizontal oven made of thermal chrome plated stainless steel, reinforced with ribs. Exchangers 2 or 3 smoke revs. Inner side made of bright sheet metal for casing and insulation. Outer side made of zinc plated sheet metal. Frame made of painted profile. Feeding doors with refractory and extractable grates. Panels with refractory for pipes cleaning. Double suction centrifugal fans for hot air delivery run ...

flue capacity: 34 kW; Conventional yeld capacity: 29 kW; flue diameter: 160 mm; hot air delivery pipes: 2 x 180 mm; flue length: 500 mm; oven width: 400 mm; oven hight: 590 mm; air flow: 2200 m³/h; power consumption: 400 W; aproximate surface to heat up: 500 m³; area to be heated: 100/150 m²; heater height without hot air conveying pipes: 1560 mm; heater width : 550 mm; heater lenght: 920 mm; weight: 190 kg; Horizontal oven made of thermal chrome plated stainless steel, reinforced with ribs. Exchangers 2 or 3 smoke revs. Inner side made of bright sheet metal for casing and insulation. Outer side made of zinc plated sheet metal. Frame made of painted profile. Feeding doors with refractory and extractable grates. Panels with refractory for pipes cleaning. Double suction centrifugal fans for hot air delivery running at low regime of turns and arranged on special elastic ...