We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
120,949 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Pneumatic cylinder COMP AIR Ø 125 stroke 400 mm
used
pneumatic cylinder linear unit COMP AIR
used
Manufacturer: Airlesspumpe B & M, Type: BMP 1132, Year: 2004, Kolbenpumpen gesamt: 1, Transmission ratio: 32:1, Volumenstrom Doppelhub ccm 2: 72, Volumenstrom Doppelhub ccm 2: 72, Compressed air bar max: 256, Pneumatic pump: yes, Wandhalterung: yes, Year :2004
used
Manufacturer: Hübner Airlessgerät, Type: HP 4/32 RF, Transmission ratio: 30:1, Volumenstrom Doppelhub ccm 2: 27, Volumenstrom Doppelhub ccm 2: 27, Fördermenge: 27 m³, Luftverbrauch bei 6 bar: 8, Compressed air bar max: 256,
used
Respiratory protection filter -Clean AIR: basic 2000 -P SL R Art. No.: 80 00 10 -Price: per piece -Number: 17 pieces -Dimensions: Ø 131/54 mm -Weight: 0.1 kg/piece
used
Ruettler - Jogger VIBRO-Air Year ca. 1992 -Online-Video-Inspection by Skype-Video- -We would be very pleased with your visit - more machines on Stock- -Available Immediately - Can be inspect- -On Stock Emskirchen / Nuernberg - Can be test-
used
; good
used
Digital airbrush painting system for direct printing on all materials Type: NV3. 1 Vehicle type Robo Pressure range 2000 x 3100 mm working with spraying head with 4 nozzles and the primary colors cyan, magenta, Yello, black for 16.7 million colors Year 2001/2002 2 x used from training centre New price 120.000,-€ Nozzles must be repaired if necessary on youtube there are some video BB´s
used
Maximum volume flow: 390 l Capacity approx.: 266 l Maximum pressure: 10 bar Tank: 50 l Cylinder/level: 2/1 Dasr7h9qg Speed: 1,360 min-1 Engine power: 2,2 kW 230 v weight: 57.5 kg Year 2011 Dimensions (Lxwxh) in mm: 870 x 400 x 700 G &-2974-O2386
used
maximum operating pressure: 10 bar effective delivery quantity at about 7.5 bar: 450 l / min required drive: 1450 rpm, 4 kW Drive motor: 380/660 V, 1440 rpm, 5.5 Tank capacity: 250 l Space: 1500 x 600 x 1320 mm Approximate weight: 250 kg
used
Te Koop: RVS Microzeef zelfreinigend. Airpel length of zeef 280mm doorsnee Raju 85mm 2 "in en uitgang.
used
Cold water kit, Chiller make AIREDALE, 450 KW, Y.O.M. 2004, Freon R 407C. More pictures and information on info@frigocom.at or on 0436641838175.
used
Brush Floor Cleaner Airflex 30 pneumatic drive very good condition LWH: 1400 x 500 x 1000 mm Weight: approx. 70 kg
used
Good condition Cooling power: 10 kW Heating power: 11 kW Overall size: 1055x745x465 mm Refrigerant diagram, operational limits see at the photos! We have15 unit in stock!
used
Compressor AIRPOL 15 manufactured in 2008. Technical data : - capacity: 120 m3 - overpressure: 10 bar - engine speed: 3000 / min - engine power: 15 kW - dimensions (length x width x height): 1100 x 650 x 1180 mm - weight: 340 kg
used
used
Key data: 90 , 10 , 13
High quality oil screw compressor used in industrial plants, factories, production halls and larger workshops. This compressor uses direct drive, which is the most efficient way of drive. The helical stage is directly coupled to the electric motor by means of a flexible coupling. Thanks to this solution, there is no energy loss when transferring torque from the engine to the block, and energy consumption is significantly reduced. Manufacturer: AIRPOL Model: NB 90 Flow rate: 820 m3/h Pressure max. 1.0 MPa Motor power: 90 kW / 160 A Load counter: 24.138 h Weight: 2300 kg Year of Build: 2012 Full DTR documentation and UDT audit book with tank passport Technical condition: used machine
used
: GoodAire 1800 output: 1.800 cbm/Stunde weight of the machine ca.: 200 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
aircraft piston compressor Mobilboy 301/50 AC Product name: Reciprocating compressor Mobilboy 301/50 AC Manufacturer: Aircraft Item number: 2004304 Year of construction: 2023 Condition: New device Technical details: • Maximum flow rate: max. 240 l/min • Hopper volume: 50 l • Filling capacity: approx. 150 l/min • Maximum pressure: 10 bar • Sound power level Lw: 96 dB(A) • Cylinders/Stages: 1/1 • Weight: 36.5 kg • a one-hand quick coupling • One pressure gauge each for working pressure and container pressure •Reducer • Powder-coated boiler • Automatic pressure switch • Connection cable length: 1.8 m Engine data: • Power drive motor: 1.5 kW • Power supply: 230 V / 50 Hz • Speed: 2850 min-1 Transport dimensions: • L x W x H: 790 x 330 x 725 mm Our price: €229.00 (EUR) plus VAT from Grunow (Brandenburg) (Subject to ...
used
Nitrogen tank is the best system for storing biological samples. 300 liter capacity. Like new, it includes 14 racks with 12 positions for 12 storage boxes of 100 cryovials each, with a capacity for a total of 16,800 samples. We have 2 tanks available for sale. This makes a total of 16,800 samples per tank, a total of 33,600 samples. It allows to store other boxes or rack formats.
used
Painting suction table make AIRATOR Schmidt & Kranz GmbH type AT 5Flow rate: 3600 m3 / hExtraction nozzle diameter: 250 mmMotor power: 3.0 kWelectrical connection: 380 V, 6.6 A.Grid area L x W: 1700 x 750 mmExternal dimensions L x W x H: 1800 x 1000 x 1800 mmWith- mobile tub belowwithout suctionused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Stock number: UG6350 Unused screw compressor by Airpol (PL) model K15. Machine can reach output up to 120 m3/h with pressure up to 10 bar. Power supply 15 kW. Includes 500 l tank. Machine new 2021.
used
pressure: 3 - 6,5 kg / cm² bar rate of flow: 26 l/min diameter of die - min./max.: -- mm Ratio: 73 : 1 rated current: 1,65 KW weight of the machine ca.: 100 kg dimensions of the machine ca.: 730 x 760 x 1200 mm noise level: 78 dB(A) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
feed pressure:8 bar :9 m³/min Number of working hours:18671 h voltage:380 - 415 V total power requirement:58,5 kW weight of the machine ca.:1300 kg dimensions of the machine ca.:2000 x 1100 x 1700 mm
used
Includes case with cables
used
voltage phase frequency. 400V /3 Ph/50 Hz volume rate of flow 3,54 m/min stage pressures 7,5
used
Sealing length: 600mm, speed: 1-4/min, max. connected load: 4kW.
new
Airprofi 853/200 Compressor Maximum volume flow: 850 l/min Filling capacity approx.: 680 l/min Maximum pressure: 10 bar Container capacity 200 l Speed: 1240 1/min Motor power: 5.5 kW Weight: 139 kg Sound pressure level: 95 dB(A) G&STÜ-2018832
used
Output: 21 bags/min, the screen is defective.
used
Connected load: 1.25kW, length: 1900mm, width: 840mm, height: 2400mm, operational hours counter: 5751h.
used
Cooling capacity: 194 kW (35°C evap. 7°C) Year of manufacture: 2005 Type of refrigerant: R407С Refrigerant circuit: 2 pcs. Compressors: 4 pcs. Danfoss (scroll) Version: Low Noise Number of fans: 3 pcs. Weight: 1474 kg. Condition: Excellent
used
Airpower Europe APD 060 090 F05/F07-V14-H MD 7Nm/bar Pneumatic swivel actuator double-acting Valve monitor - Feedback box Model LSB 02-M2 IP 67 230 V Outer D 185 mm Inside D 155 mm Thickness 4 cm Outer steel
used
Guide cylinder, compact cylinder with guide COMPAIR GCXA063H125 8265590 Piston diameter: Ø 63 mm rod diameter: 3x Ø 20 mm stroke: 125 mm end plate: 148 x 19 x 80 mm New ! Dimensions: 350 x 155 x 85 mm
used
Pneumatic pulse valve, solenoid pulse valve, 3/2-way, directional control valve AIRTEC P 05 320 Nominal diameter: 6 mm Flow: 750 l/min Operating pressure: 0 - 10 bar Control pressure: 2 - 10 bar Connections: G 1/8 New ! Dimensions: 78 x 40 x 25 mm
used
Key data: 90 , 10 , 13
High quality oil screw compressor used in industrial plants, factories, production halls and larger workshops. This compressor uses direct drive, which is the most efficient way of drive. The helical stage is directly coupled to the electric motor by means of a flexible coupling. Thanks to this solution, there is no energy loss when transferring torque from the engine to the block, and energy consumption is significantly reduced. Manufacturer: AIRPOL Model: NB 90 Flow rate: 820 m3/h Pressure max. 1.0 MPa Motor power: 90 kW / 160 A Work counter under load: 27.062 h Weight: 1800 kg Year of Build: 2007 Full DTR documentation and UDT audit book with tank passport Technical condition: used machine
used
suitable for nitrogen all stainless steel belt width ± 600 mm nett belt length ± 6.000 mm dimensions (l x w x h) : ± 7.600 x 1.500 x 2.300 mm
used
Digestorium exhaust system for pharmacies, chemistry and medicine -Interior dimensions: 540/850 / H900 mm -Stainless steel version -Glass door front -With Camfit filter cartridge -Connection: 0.085 kW -Type suction: EB 225 -with extractor hood -Dimensions: 675/900/H1200 mm -Weight: 100 kg
used
Switching power supply, control, modem, power supply -Type: SPA 15-11810 -Price: per piece -Number: 8x available -Weight: 0.6 kg
used
Centrifugal fan, dust extractor fan, fan, extractor, dust fan, blower -Manufacturer: Airheat, centrifugal fan with soundproof housing -Type: RDH-500-11.0 -Volume flow: 20000 m3 / h -Motor: Hoyer 15 kW 1460 rpm -Dimensions: see techn. Drawing with the photos -Dimensions: 1800/1110 / H2900 mm -Weight: 584 kg
used
Fixators, leveling units, leveling elements, machine feet, machine feet, leveling shoes, machine foundations, leveling shoes, wedge shoes, machine supports, leveling feet, spring elements -Leveling elements: 4 pieces, for machine tools and systems -Type: GLV150 -Height: 25 mm -Price: complete -Dimensions each: 140/140/H32 mm -Weight 2.5 kg/piece
used
Fixators, leveling units, leveling elements, machine feet, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot -Fixators: for machine tools and systems -min. height: 75 mm -Max. Height: 90 mm -Price: per piece -Number: 6 piece -Dimensions: 245/110/H85 mm -Weight: 11.1 kg/piece
used
Fixators, leveling units, leveling elements, machine feet, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot -Fixators: for machine tools and systems -min. height: 75 mm -Max. Height: 95 mm -Dimensions: 230/180/H90 mm -Weight: 13 kg
used
Fixators, leveling units, leveling elements, machine feet, machine feet, leveling shoes, machine foundations, leveling shoes, wedge shoes, machine supports, leveling feet -Fixators: for machine tools and systems -min. Height: 75mm -Max. Height: 95 mm -Price: per piece -Number: 4 pieces -Dimensions: 230/180/H80 mm -Weight: 12.3 kg/piece
used
Ventilation system, comfort compact ventilation, ventilation control, ventilation device control -Manufacturer: Aircool WGB control ventilation device -Type: unfortunately no exact type designation -Individual components: see photos -Quantity: 19x controls available -Price per piece -Dimensions: 380/240/H415 mm -Weight: 14.7 kg/pc.
used
Japanese Generator set Brand Airman 200kva Prime Power only Run 3643 hours ,used low hour Japanese Airmen Diesel Genset available in stock for sale, Hino ENGINE WITH Japanese ALTERNATOR WITH original Airmen CONTROL PANEL SYSTEM WITH SOUND PROOF CANOPY.
used
4. Mobile SAW Tractor unit OERLIKON Source STAMIC 1303 DC - cabel array with sealed multipin connector on tractor for better handling and shipping of unconnected machine - Controlbox SUBARC 3 - Tracor MEGATRAC 6 with Laser and Flux Reusing unit by nozzle controll unit for real welding speed externally - machine comes with OEM manual and literature You find further listed equipment for welding in additional auctions (doens not belong to this auction): 1. 1 SAW Tandem Welding Boom - Oerlikon UP Tandem Column And Boom fitted for 2 times 3,2mm wire Welding Column for Submerged Arc Welding SAW Tandem submerged arc welding Manufacturer: Welding System: Oerlikon / AirLiquide MFT 70X60 SO, built 2011 used until 2014 Column: Uniweld DIMENSIONS: high 8m; reach 6 m; dolly 3,7 m x 3,6 m Tandem Submerged Arc Welding - Starmatic 1303 DC - Starmatic 1003 AC/DC - Contro ...
used
Oxy-Cut gantry and controller: Oxytome 30 HPC Control: DigiSaf HPC; Torch Holder: PO 150E; Torch: OxySaf G1; Plasma Power Source: Nertajet HP 125; Plasma Troch: OCP 150; Cooling System: FrioSaf 10; Software: Lantek Expert Cut.
used
Solenoid valve, directional control valve AIRTEC series KN-05 KN-05-510-PR-2422-11 3 - 10 bar 1x Solenoid coil: 24 V AC 5 VA used, tested ! Dimensions: 135 x 40 x 61 mm
used
Description: with pump to suck in polyurethane and bag filling system Approx. Onsite Dimension. (l x w x h): 1,600 x 1,000 x 2,300 mm, weight approx.: 300 kg
used
Description: Machine for creating two-component foam cushions Approx. Onsite Dimension. (l x w x h): 1,800 x 1,400 x 1,200 mm, weight approx.: 300 kg