air used for sale

Motor power: 4 kW YOM: 1997 Operating hours: 0 (fully refurbished) Flow rate: ~0.55 m³/min at 8 bar Max. pressure: 10 bar Air tank volume: 90 l (integrated) Noise level: ~64 dB(A) Cooling: Air-cooled Electrical supply: 400 V / 3 Ph / 50 Hz Control system: Basic Connections: Air outlet: 3/4\" BSP | Condensate: 1/2\" BSP Dimensions (L x W x H): 600 x 630 x 850 mm Weight: ~150 kg Condition: Refurbished to \"as new\" with zero hours Features: Energy-efficient, robust design, regular maintenance required Replaced parts: New air & oil filters, separator, bearings, gaskets, belts, electrical components, intake & MPV valves Auction-ID: A7-45988-12

Type: Condensate treatment unit Max. flow rate: Up to 10 m³/min (depending on model) Hydrocarbon concentration: < 10 mg/l (environmental compliance) Max. inlet pressure: 16 bar Connections: Inlet: 1/2\" BSP | Discharge: 1/2\" BSP Temperature range: Condensate & Control air: 1–60 °C | Ambient: 1–45 °C Material: Corrosion-resistant construction Maintenance: Easy access, quick filter replacement Dimensions (L x W x H): 600 x 400 x 800 mm Weight: ~20 kg Auction-ID: A7-45988-10

connection: 230 V; description: unused; 4461; Auction-ID: A1-45901-311

Type: Refrigeration dryer Standard: DIN ISO 7183 (7 bar, 35 °C inlet, 25 °C ambient, +3 °C PDP) Nominal flow (50 Hz): 6.2 m³/min (372 m³/h, 219 CFM) Nominal flow (60 Hz): 7.15 m³/min (429 m³/h, 253 CFM) Pressure dew point: +3 °C Power consumption: 0.57 kW (50 Hz) / 0.69 kW (60 Hz) Operating pressure: 2 – 16 bar Max. inlet temp.: 65 °C Max. ambient temp.: 50 °C Air connection: 1 1/2\" BSPP-F Electrical supply: 230 V / 1 Ph / 50–60 Hz Refrigerant: R513A (or R134a in older units) Weight: ~55 kg Features: E-Pack aluminium heat exchanger with stainless demister, digital controller with PDP indication, alarm relay, timed drain Energy mode: Optional Energy Save” function for low partial-load power draw Auction-ID: A7-45988-13

Power: 75 + 2.2 kW Operating parameters: Working pressure 10 bar; FAD 10 m³/min; noise ~75 dB(A); operating hours 51,000 h; dim. 1,995 x 1,065 x 1,450 mm; wt. 1,320 kg Workpiece capacity: Industrial compressed air supply; high-capacity continuous operation Supported edges: N/A Edge types: Compressed air generation Included equipment: Rotary screw compressor; air-cooled system; control panel; enclosed housing Compliance: Industrial compressor unit; CE N/C Power supply: Electric (3~) Year/Manufacturer: 2011; Manufacturer N/C Remarks: Used condition; high operating hours; suitable for large-scale industrial air demand applications High-capacity 75 kW rotary screw compressor delivering 10 m³/min at 10 bar. Auction-ID: A7-45988-5

Type: Condensate treatment unit Max. compressor volume flow: Up to 10 m³/min (model dependent) Hydrocarbon concentration: < 10 mg/l (compliant with environmental standards) Max. inlet pressure: 16 bar Connections: Condensate inlet: 1/2\" BSP | Discharge: 1/2\" BSP Temperature range: Condensate/control air: 1–60 °C | Ambient: 1–45 °C Material: Corrosion-resistant, high-quality build Maintenance: Easy access, tool-free filter replacement Dimensions (L x W x H): 600 x 400 x 800 mm Weight: Approx. 20 kg Auction-ID: A7-45988-11

Parameter Value Model Name Herkules 450/10/50 Type Piston Air Compressor Tank Capacity 50 litres Max. Operating Pressure 10 bar Motor Power 2.2 kW / ~3 HP Voltage 230 V AC Frequency 50 Hz Engine Speed 2800 rpm Air Intake Capacity 400 L/min Air Delivery (Effective) 320 L/min Noise Level 95?97 dB Number of Cylinders 2 (twin cylinder) Lubrication Oil-lubricated system Typical Uses Home workshop, tire inflation, air tools, painting

Type: Refrigeration dryer with thermal mass control Model: SECOTEC (type TA 8 or higher) YOM: 2013 Flow rate: 2.55 m³/min Power consumption (100% flow): 0.80 kW Power consumption (50% flow): 0.53 kW Pressure loss: 0.20 bar Air connection: G 1 Condensate drain: G 1/4, ECO-DRAIN 30 with ball valve Electrical supply: 230 V / 1 Ph / 50 Hz Dimensions (W x D x H): 620 x 540 x 963 mm Weight: 116 kg Features: SECOTEC controller with dew point trend display, cycling refrigerant compressor, insulated cold surfaces, floating alarm contacts Auction-ID: A7-45988-22

Type: Screw compressor Model: Kaeser SX 8 YOM: 2018 Rated power: 5.5 kW Air flow: 800 l/min Max. pressure: 11 bar Working hours: 19,742 h (17,808 h under load) Time left to maintenance: 3000 h Control system: SIGMA CONTROL 2 with RFID reader Rotor: SIGMA PROFILE, energy-saving, low-speed Motor class: IE3 premium efficiency Dimensions (D x W x H): 590 x 632 x 970 mm Weight: 155 kg Features: RFID card, SD slot, KAESER cooling system, quiet & compact, high efficiency Auction-ID: A7-45988-19

PET bottle air conveyor over 2 floors, used for 0.5 l, 1.0 l and 1.5 l bottles. Length approx. 50 m. Our team at VBW Asset Trade will be happy to answer your questions. Send us an inquiry or simply give us a call!, Additional title: PET bottle conveyor system, Capacity: 24000 b/h, Formats: 0,5, 1,0 l und 1,5 l PET-bottles, Material: mainly stainless steel, Position: free-standing on the floor / suspended from the ceiling, Features: Bottle transport channel with bottle guides, with 2 x 360° and additional curves, with a 15° incline and horizontal run, 5 frequency-controlled blower motors

Complete compressed air system Aircenter SM13 with refrigerant dryer and a compressed air vessel. The Sigma Control 2 unit coordinates compressed air generation and consumption., Additional title: Screw compressor with refrigeration dryer and compressed air filters, Operating hours: 2169, Flow: 1 m³/min, Operating pressure: 8 bar, Compressed air vessel volume: 270 l, Power: 7,5 kW, Frequency: 50 Hz, Weight: 440 kg, Operation / Control: Operating terminal / Sigma Control 2, Base construction: screw compressor, mounted on frame, Features: compressed air vessel; refrigeration dryer; coalescence filter KE; activated carbon adsorber ACT 12; dust filter KD; coalescence filter KE Oil filter, oil separator tank, oil drainage system

Oil-free scroll compressor with integrated refrigeration dryer., Additional title: oil-free scroll compressor, Volume flow at 7,75 bar: 1,12 m³/min, Volume flow at 4 bar: 1,16 m³/min , Power: 12,9 kW, Voltage: 400 V, Frequency: 50 Hz, Length: 953 mm, Width: 1207 mm, Height: 1660 mm, Weight: 520 kg, Features: with integrated refrigerant dryer, frequency controlled

Air compressor including compressed air dryer and oil trap with oil-water-separator. air compressor: - volume rate of flow: 8,02 m3/min - stage pressures: 13 bar g - suction pressure: 1 bar - installed motor capacity: 45 kW, Additional title: Compressor with refrigeration dryer and oil separator, Capacity: 8 m³/min, Stage pressure: 13 bar, Suction pressure: 1 bar, Drive: 4250 rpm, Power: 45 kW, Current: 97 A, Voltage: 400 V, Frequency: 50 Hz, Length: 1,80 m, Width: 0,92 m, Height: 1,80 m

wisAIR oil-free air compressor including compressed air dryer and air filter. air compressor: - max. allowable working pressure: 13 bar - capacity: 146,5 l/s - motor power: 55 kW, Additional title: Oil-free screw compressor with refrigeration dryer and compressed air filter, Capacity: 146 l/s, Max. working pressure: 13 bar, Motor drive: 5200 rpm, Power: 55 kW, Voltage: 400 V, Frequency: 50 Hz, Length: 2,60 m, Width: 0,97 m, Height: 2,00 m, Weight: 1195 kg

Compressed air system with air compressor, refrigeration dryer, activated carbon filter and two compressed air tanks., Capacity: 202 m3/h, Operating pressure: 10 bar, Features: Air compressor; refrigeration dryer; activated carbon filter; 2 x compressed air tanks.

Overview  This complete compressed air installation was manufactured between 2009 and 2013 by Atlas Copco (Sweden) and Donaldson Filtration GmbH (Germany). The setup includes two Atlas Copco GA132 VSD low-pressure compressors, one Atlas Copco FD160 VSD air dryer, and one Donaldson UFA-AC0016 oil separator. Designed to deliver reliable and energy-efficient air supply at up to 8.5 bar, this system is ideal for continuous production environments. The installation has been regularly maintained, with full maintenance completed in August 2025, and is in good working condition. The entire system is still installed and connected, and immediately available for inspection and sale. Technical data  Years of Manufacture: 2009 – 2013 Application: Industrial compressed air system Total Capacity: 2 × 24.1 m³/min Maximum Pressure: 8.5 bar Power Supply: 274.8 kW Scope of Delivery  Compressor | Atl ...

flue capacity: 350 kW; Conventional yeld capacity: 279 kW; flue diameter: 200 mm; hot air delivery pipes: 3 x 300 mm; flue length: 1200 mm; oven width: 740 mm; oven hight: 1040 mm; air flow: 17800 m³/h; power consumption hot air fan: 3 kW; power consumption flue gas exhaust: 600 W; aproximate surface to heat up: 5000 m³; area to be heated: 1000 m²; heater height without hot air conveying pipes: 2500 mm; heater width: 1100 mm; heater length: 1900 mm; weight: 850 kg; Horizontal oven made of thermal chrome plated stainless steel, reinforced with ribs. Exchangers 2 or 3 smoke revs. Inner side made of bright sheet metal for casing and insulation. Outer side made of zinc plated sheet metal. Frame made of painted profile. Feeding doors with refractory and extractable grates. Panels with refractory for pipes cleaning. Double suction centrifugal fans for hot air delivery run ...

flue capacity: 510 kW; Conventional yeld capacity: 407 kW; flue diameter: 250 mm; hot air delivery pipes: 4 x 350 mm; flue length: 1900 mm; oven width: 900 mm; oven hight: 900 mm; air flow: 26000 m³/h; power consumption: 4500 W; aproximate surface to heat up: 8000 m³; area to be heated: 1800 m²; heater height without hot air conveying pipes: 3000 mm; heater width: 1220 mm; heater length: 2700 mm; weight: 1575 kg; Horizontal oven made of thermal chrome plated stainless steel, reinforced with ribs. Exchangers 2 or 3 smoke revs. Inner side made of bright sheet metal for casing and insulation. Outer side made of zinc plated sheet metal. Frame made of painted profile. Feeding doors with refractory and extractable grates. Panels with refractory for pipes cleaning. Double suction centrifugal fans for hot air delivery running at low regime of turns and arranged on special el ...

flue capacity: 175 kW; Conventional yeld capacity: 140 kW; flue diameter: 200 mm; hot air delivery pipes: 3 x 250 mm; flue length: 950 mm; oven width: 600 mm; oven hight: 860 mm; air flow: 6300 m³/h; power consumption: 8900 W; aproximate surface to heat up: 2200 m³; area to be heated: 500/600 m²; heater height without hot air conveying pipes: 2200 mm; heater width: 930 mm; heater length: 1700 mm; weight: 615 kg; Horizontal oven made of thermal chrome plated stainless steel, reinforced with ribs. Exchangers 2 or 3 smoke revs. Inner side made of bright sheet metal for casing and insulation. Outer side made of zinc plated sheet metal. Frame made of painted profile. Feeding doors with refractory and extractable grates. Panels with refractory for pipes cleaning. Double suction centrifugal fans for hot air delivery running at low regime of turns and arranged on special ela ...

flue capacity: 125 kW; Conventional yeld capacity: 99 kW; flue diameter: 180 mm; hot air delivery pipes: 2 x 250 mm; flue length: 750 mm; oven width: 560 mm; oven hight: 700mm; air flow: 6300m³/h; power consumption: 1500W; aproximate surface to heat up: 1500m³; area to be heated: 300/350 m²; heater height without hot air conveying pipes: 1980 mm; heater width: 800 mm; heater length: 1280 mm; weight: 415 kg; Horizontal oven made of thermal chrome plated stainless steel, reinforced with ribs. Exchangers 2 or 3 smoke revs. Inner side made of bright sheet metal for casing and insulation. Outer side made of zinc plated sheet metal. Frame made of painted profile. Feeding doors with refractory and extractable grates. Panels with refractory for pipes cleaning. Double suction centrifugal fans for hot air delivery running at low regime of turns and arranged on special elastic  ...

flue capacity: 34 kW; Conventional yeld capacity: 29 kW; flue diameter: 160 mm; hot air delivery pipes: 2 x 180 mm; flue length: 500 mm; oven width: 400 mm; oven hight: 590 mm; air flow: 2200 m³/h; power consumption: 400 W; aproximate surface to heat up: 500 m³; area to be heated: 100/150 m²; heater height without hot air conveying pipes: 1560 mm; heater width : 550 mm; heater lenght: 920 mm; weight: 190 kg; Horizontal oven made of thermal chrome plated stainless steel, reinforced with ribs. Exchangers 2 or 3 smoke revs. Inner side made of bright sheet metal for casing and insulation. Outer side made of zinc plated sheet metal. Frame made of painted profile. Feeding doors with refractory and extractable grates. Panels with refractory for pipes cleaning. Double suction centrifugal fans for hot air delivery running at low regime of turns and arranged on special elastic ...

SCREW AIR COMPRESSOR model KAESER SK 19 with Vertical tank Lt. 750 second hand machine in Excellent working condition motor power Hp 15 ( Kw 11 ) working pressure bar 10 volt. 380/50