air transport used for sale

Description: Output: max. 3,150 m³/h Negative air pressure: max. 2,250 PA Voltage: 3 x 400 V Motor power: 3 kW Waste container volume: 72 l Compressed air consumption: 73 Nm³/h Suction nozzle: 1 x 160 mm / 1 x 200 mm Approx. Onsite Dimension. (l x w x h): 1,100 x 1,100 x 2,700 mm, weight approx.: 260 kg

Description: Powder painting line Input dimensions: 2100mm high x 1970 mm wide Side walls can be closed to work with a width of: 1500 mm , Vertical travel of the booth: 2130 mm max height. Automatic spray gun working area: 2850 mm max. , Extractors and conveyor belt Burners and gas valve need to be checked. Washing and degreasing area Automatic painting with 4 spray guns (2 on each side) Manual painting area, 2 stations Drying area 2007 Estimated year of manufacture This machine hasn´t worked more than two years. Estimated working hours 1000 Approx. Onsite Dimension. (l x w x h): 40,000 x 8,000 x 3,000 mm, weight approx.: 44,000 kg

Cooling Tower - Spiral Tower

Mould transport system, capway

Turn 180 , Fabr. unknown, for belt width 330 mm,

Conveyor belt with counter, 1 row

Spiral chute for bread made of stainless steel,

Curve 90 for transport track ,Fabr. Kaak

Mold conveyor belt from Zela grease machine

Feeding table/feeding belt for bread sticks to the circular knife machine, Fabr. Herlitzius

Plastic containers / baskets, stackable Dimensions: outside 600 x 400 mm

Hugo Beck SL 412/25 Shrink Tunnel Hugo Beck Shrink tunnel SL 412/25 380 V 6/9 KW power Air circulating blower Cooling fans 2 x control heater 1 x basic heating 1 x auxiliary heater with chain transport Metrics Tunnel length: 120 cm Machine: LxWxH = 166x64x26cm More items - new and used - can be found in our shop! International shipping costs on request!

Air cooler water cooler DMA 315 6.7 m ³/h 28 ° c air-water cooler cooler aeri Air-water cooler Manufacturer: -. Model: DMA 315 M35B 6.7m ³/h m. ABB electric motor slightly damaged on the Panel Year of construction: 1999 Used functional & in good condition. Off bearing resolution

After cooking stove, thermal oil, Formcook, frying line (CFS, GEA, Koppens, Alco, Stork) - continuous grilling line - Total length outside: 6 m - Total width: approx. 1.300 mm - Height of the gallows: 1.200 mm - Gallows for chain hoist - 5 floors above each other - Conveyor belt of wire belt: 600 / 2,35 / 7 / 12,7 - Double-walled floor and hood, isolated

After cooking stove, thermal oil, Formcook, frying line (CFS, GEA, Koppens, Alco, Stork) - serial: Sprematec - length: approx. 10 m - width: 1350 mm inside / 1518 mm outdoor - heated thermal oil - year: 10/2003

Advantages of Aflatek AirPro500W: -Large 500l air tank -12.5bar maximum pressure. -Powerful 7.5kW belt-driven motor. -3 cylinder multistage air compression. -Mounted on 4 rubber wheels, portable. Technical data: Power supply , V: 3Ph 400V 50Hz Motor Speed, rpm: 730 Motor power, kW: 7.5 Motor power, HP: 10 Air supply, L/min: 800 Maximum pressure. Bar: 12.5 Maximum pressure, Psi: 181 Air tank, L: 500 Dimensions(length x width x height), mm: 1840x600x1130 Weight, kg: 260 Shipping details: Packaging: Plywood box on a pallet Dimensions(length x width x height), mm: 1900x650x1200 Weight, kg: 280 Tracking: Available -Price is with VAT 21% included. Contact us if you need a VAT free offer. -For shipping costs contact us directly.

Advantages of Aflatek Air50: -50l air tank, longer operation time. -Mounted on 2 rubber wheels, portable. -Easy to use. -Requires little maintenance. Technical data: Power supply , V: 230 Motor Speed, rpm: 2850 Motor power, kW: 1.8 Motor power, HP: 2.5 Air delivery, L/min: 206 Maximum pressure. Bar: 8 Maximum pressure, Psi: 116 Air tank capacity, L: 50 Dimensions, (length x width x height), mm: 840x430x690 Weight, kg: 30 Shipping details: Packaging: Carton box Dimensions, (length x width x height), mm: 850x450x710 Weight, kg: 32 Tracking: Available -Price is with VAT 21% included. Contact us if you need a VAT free offer. -For shipping costs contact us directly.

Manufacturer: Kaeser Type: FC-138-D Maximal pressure: 16 bar Temperature range: 1 - 66 celsius Volume: 9,4 l

Weiss Air Conditioning Ultraclean ULTRA 55.2  Manufacturer: Weiss Klimatechnik GmbH Device type: Ultraclean, ULTRA 55.2 DXU Year of construction: 2007 Nachheitzer 10.5 kW Cooler: 12.7 kW Humidifier: 3 kg/h Filter class: F7 Supply air flow 2500 m{h ext. pressing 200

Description: max. working pressure: 10 ,bars rated ,power: 5,5 kW working hours total: approx. 1492 hrs working hours under load: approx. 531 hrs time left till maintenance: approx. 1508 hrs Please note: compressors are delivered free of liquids, media, oils and fluids inside! suction capacity: 5.5 kW, operating pressure: 10 bar, modelname / number: AIRCENTER SM 10, year of manufacture: 2,022, Approx. Onsite Dimension. (l x w x h): 630 x 594 x 1,716 mm, weight approx.: 410 kg

20x 800 ltr. VA2 transport tank, used, round standing, stackable, dome top 400 mm, residual outlet with disc valve NW 80, operating pressure 2 bar, test overpressure 3.4 bar, overpressure valve in the lid, pressure resistant for e.g. overlay with CO2 or CO2 impregnation, weight/h: 130 kg, cleaned inside, pressure-tested, very stable design, diameter: 1 m, H: 1.60 m, Price/pc: 940,- â?¬ plus VAT from dolgesheim warehouse

working length: 2451 mm Working width: 1670 mm Working height: 800-1000 mm Neue Haberkorn Rückfördereinrichtung nach Vierseitenhobelmaschine ------------------------------------------------------- Förderanlage für Holzlängen von 300 mm-4200 mm Pos.1 Längs-Quer-Länsförderer ca.2451 x 1670 mm - höheneinstellbare Stützböcke (ca.800 mm - 1000 mm) - stufenlos angetriebene Rollenbahn ca.5-25m/min, - Rollendurchm.50mm, 140mm Rollenmantellänge - Übergabe auf Querförderer durch Heben-Senken der Rollenbahn - Querförderer mit 6 Stck. Traversen - Förderbänder 50mm breit, in Kunststoffbahnen geführt - Antrieb ca.5-25m/min, 0,37 KW - ca.1250mm von Anschlag zu Anschlag - Übergabe als Hebesenkeinrichtung - angetriebene PVC beschichtete Stahlrollen, Durchm.50mm, 140mm Mantellänge - Antrieb ca.5-25m/min, 0,37 KW - Rollenabdeckung nach HBG Pos.2 Förderband ca.3000 x 260mm - höheneinst ...

Type: Conveyor with modular belt Condition: after renovation Length: 5000 mm Available quantity: 2 pieces Width: 440 mm Belt width: 410 mm Band thickness: 16 mm Pitch: 52 mm Shaft for gear motor: 30mm Prepared for legs: 60mm Price: 2900 EUR per piece

General SKU354T1020 LocationBarneveld MakeAZO Main Features MaterialStainless steel Motor0.4 KW Inlet diameter350 mm Specified Features - Miscellaneous transport MaterialStainless steel Miscellaneous transport Capacity± 1400 Ltr. Information Mounted in framecheck Floorspace1,2x1,2 m Total height2,2 m Weight700 kg Extra Specificationswith a stainless steel vibro frame, dimensions: 1210x1310 mm, with two VM motors, type JKA104-50, 0.4 kW, 380-420 Volt, 1410 rpm (Ex), and one additional stainless steel frameMiscellaneous transportAZOConveying systems > Miscellaneous transportBrand > AZO What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU227T452 LocationBarneveld MakeSpimabo Type2500 L No.263 Year of construction2003 Main Features MaterialStainless steel Specified Features - Miscellaneous transport MaterialStainless steel Information Total height1,6 m Weight400 kg CEcheck Floor space3,3x1,3 m Extra Specificationswith: Saxon :bag sealer: Ridder RT 115 transportbelt : from 2002, dimensions: 460x2400 mm, speed: 0,16 m/s:Miscellaneous transportSpimaboConveying systems > Miscellaneous transportBrand > Spimabo What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU227T451 LocationBarneveld MakeSpimabo Machinebouw (NL) TypeSP2500 No.324 Year of construction2007 Main Features MaterialStainless steel Specified Features - Miscellaneous transport MaterialStainless steel Information Total height2,3 m Weight480 kg CEcheck Floor space3,1x1,2 m Extra Specificationswith: O/K International bag sealer :SS2 R-L NB from 2007: Ridder RT 115 transportbelt : from 2004, dimensions: 460x2400 mm, speed: 0,16 m/s: Fischbein bag closer :Miscellaneous transportSpimaboConveying systems > Miscellaneous transportBrand > Spimabo What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU227T450 LocationBarneveld MakeSpimabo Machinebouw (NL) TypeSP2500 No.286 Year of construction2004 Main Features MaterialStainless steel Specified Features - Miscellaneous transport MaterialStainless steel Information Total height2,1 m Weight500 kg CEcheck Floor space2,7x1,3 m Extra Specificationswith: O/K International bag sealer :SS2 MK 2B from 2004: Ridder RT 115 transportbelt : from 2004, dimensions: 460x2400 mm, speed: 0,16 m/s: Fischbein bag closer :Miscellaneous transportSpimaboConveying systems > Miscellaneous transportBrand > Spimabo What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU204U036 LocationBarneveld MakeVolkmann TypePPC200VS No.082073 Year of construction2008 Main Features MaterialStainless steel Inlet diameter40 mm Specified Features - Miscellaneous transport MaterialStainless steel Miscellaneous transport Capacity6 bar Information Mounted on wheelscheck With switchgearcheck Total height2,10 m Weight250 kg CEcheck Floorspace1,80x1,45 m ATEX compatiblecheck Extra SpecificationsWith multijector vacuum-pump, type G900 column height movable Miscellaneous transportVolkmannConveying systems > Miscellaneous transportBrand > Volkmann What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Description: Transport chassis consisting of: 4 pcs. chassis with 8t load capacity each Load capacity 8000 kg Wheel diameter 75 mm Height 105 mm Width 190mm Length 370mm Height 100mm Support surface around 100 mm Total weight 70 kg Dimensions L x W x H 800 x 600 x 250 mm Approx. Onsite Dimension. (l x w x h): 800 x 600 x 250 mm, weight approx.: 70 kg

used box transport Make KHS 18 m straight transporter 240,-€/m 2 pieces 90 curves without drive 450,-€ several drive/deflection stations 650,-€ Various railing brackets with guides

Cat No. 12-2800(132) New made of V2A - KUBISCH - pressureless Standard equipment with: • External dimensions: 1000 x 1000 mm • Height tank body: approx.1000 mm • Height tank with feet: approx.1480 mm • Material V2A AISI 304 - Material thickness: tank 1.5 mm / feet 2.5 mm / transport eyelets 2.5 mm • Weight: 130 kg • Capacity: 1000 litres • Top manhole 400 mm - lid with 4 screws and clamping bracket with screw and fermentation spandy NW 50 • Underbody deep drawn • with residual outlet DN 65 • Corner reinforcement 150 mm/150 mm from bottom to top tank • Surface: marbled outside - inside 3D • stackable - transportable with hand-held trucks • In the filled state of: 1 + 1 • In the empty state of: 1 + 3 Supplement/piece (prices on request): Disc valve DN 65 Disc valve DN 50 Blind cap Reduction piece NW 65/40 or 65/ ...

Cat. No. 09-1590-1 New Standard: - with residual outlet with inclined seat disc valve DN 50 - with cylindrical conical bottom at the bottom and top - Test pressure: 1.5 bar - permissible operating pressure: 0.49 bar - Material V2A AISI 304 - Surface inside and outside IIIC - With mannhole DN 400 with 6 screws, overpressure valve - Threaded connection connector DN 25 and with inclined disc valve DN 25 Cat. No. Content: Diameter: Ges.Height: Weight: 09-1590-1 600 litres 1000 mm 1310 mm 79 kg On request with (please ask prices): Fermentation spandconnection DN 50 CIP Cleaning Fermented spundar fitting Trial tap For inquiries: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 On request, we will be happy to send you our complete catalogue. All prices are ex works plus law VAT Intermediate sale reserved! Freight c ...

Cat.-Nr. 09-1590-1 new Standard Features: - with outlet with inclined seat valve DN 50 - cylindrical conical head top and bottom - test pressure: 1,5 bar - max. allowable operating pressure: 0,49 bar - material AISI 304 - surface inside and outside IIIC - with manhole DN 400 with 6 srews, over pressure relief valve, thread connection DN 25, with inclinded seat valve DN Cat.-Nr. Capacity: Diameter: Total Height: Weight: 09-1590-1 600 litres 1000 mm 1310 mm 79 kg Surcharges/Unit: Fermentation Lock DN 50 CIP Cleaning System Fermentation Valve Sample Valve For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Kat. No. 09-1590-2 new standard equipment: With rest outlet with sloping seat discs valve DN 50 With cylindrical conical ground below and on top Test pressure: 1.5 cash – admitted working pressure: 0.49 bar Material V2A AISI 304 - surface inside and outside IIIC With manhole DN 400 m. 6 screws, Ueberdruckventil thread connection carbines DN 25 and with sloping seat discs valve DN 25 Kat. No. contents: Diameter: G flat height: Weight: 09-1590-2 800 litres 1,000 mms 1,550 mms 89 kg upon request: CIP Cleaning Connector fermentation fittings Fermentation lock DN 50 Sample Valve For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Kat. No. 09-1590-4 new standard equipment: With rest outlet with sloping seat discs valve DN 50 With cylindrical conical ground below and on top Test pressure: 1.5 cash – admitted working pressure: 0.49 bar Material V2A AISI 304 - surface inside and outside IIIC With manhole DN 400 m. 6 screws thread connection carbines DN 25 and with sloping seat discs valve DN 25 contents: 1,200 litres diameter: 1,000 mm total height: 1,980 mm weight: 115 kg For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Cat. No. 09-1590-3 new standard equipment: With rest outlet with sloping seat discs valve DN 50 With cylindrical conical ground below and on top Test pressure: 1.5 cash – admitted working pressure: 0.49 bar Material V2A AISI 304 - surface inside and outside IIIC With manhole DN 400 m. 6 screws thread connection carbines DN 25 and with sloping seat discs valve DN 25 diameter: 1,000 mm contents: 1,000 mm height: 1,720 mm weight: 102 kg For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Cat-Nr. 09-2090 new cubic Standard Features: • Outer Dimensions: 1050 x 1050 mm • Height Body Tank: approx. 1550 mm • Height Tank incl. Feet: 2000 mm • Material AISI 304 – Material Thickness: Tank 1,5 mm / Feet 2,5 mm / Hooks for Transport 2,5 mm • Weight: 154 kg • Volume: 1500 Liter • Manhole on the Top 400 mm - Lid with 4 Screws and Clamps with Bunging NW 50 (as per Photo below) • Bottom in Symmetrical Shape • Outlet Discharge DN 65 • Reinforcement 150 mm in each Corner of the Tank • Surface: outside marbled – inside IIID • stackable – 3 in empty, 2 in full • transport possible with Hand-Lift or Fork-Lift Surcharges / unit (upon request): Butterfly Valve DN 65 Butterfly Valve DN 50 Closing Cap for Outlet Reducing Unit NW 65/40 or 65/50 For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-909052 ...

Cat-Nr. 10-2460 in a very good condition Material: V2A - AISI 304, 1.4301 Surface: inside: IIID, outside marbled Upper Body: with Manhole Lid DN 400 with 4 Screws with Clamp Closure, with Fermentation Lock DN 50, with 4 Eye Hooks Lower Body: with Conical Bottom (Outlet DN 65) with Forklift Shoes. Can be accessed from all sides with a Forklift/Truck Pallet Measurements and Weight: Height: 1570 mm Outer Dimensions: 800 x 1200 mm Weight: 130 kg The price is for one tank. For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Cat.-No. 09-1590-6L new Material: V2A (AISI 304) 1.4301 – Surface inside and outside IIIC upper bottom: Manhole with 6 Screws incl. thread connection DN 50 according to DIN 11851 lower bottom: With Conical Bottom 45°and rest outlet underneath with forklift and pallet truck content: 1500 l 1100 mm diameter 2250 mm total height Weight 130 kg Surcharges/unit (price upon request): Fermentation Connector DN 50 Fermentation Lock butterfly valve DN 40, DN 50 Sample Valve CIP Cleaning System Blind Cap DN 50 immersion socket for temperature control Temperature control/digital temperature control/analog All prices are valid Ex-Works, excl.VAT Delivery: from D-97753 Karlstadt-Karlburg Freight Charges: depending on dimensions and destination Subject to prior sale

Cat.-No. 15-00013 in a very good condition Material: V2A - AISI 304, 1.4301, Material Thickness: Tank Body: 1,5 mm - Feet: 2,5 mm – transport lugs: 2, 5 mm Surface: inside: IIID, outside marbled Upper Body: Manhole Lid DN 400 with 4 Screws with clamp Thread Connection DN 50 Tank Corner Reinforcement 150 mm / 150 mm Lower Body: with Conical Bottom (Outlet DN 65) with Forklift Shoes. Can be accessed from all sides with a Forklift/Truck Pallet Measurements and Weight: Total Height: 1750 mm Height: 1250 mm Outer Dimensions: 800 x 1200 mm Weight: 130 kg The price is for one unit. Surcharges/unit (price upon request): Butterfly Valve DN 65 Butterfly Valve DN 50 Closing Cap for Outlet Reducing unit NW 65/40 or 65/50 All prices are valid Ex-Works, excl.VAT F ...

To turn the ini stakli ų nukrovimui i ų gluing. Length: 3000 mm. Width: 500 mm. 39 knives. The dimensions of the conveyor can be played under č ū kei į need.

Cat No. 13.0412 in a very good condition operating pressure: max.3 bar year of construction: 1996 connection on top: 2 and ¾ with plastic cap without pressure fitting measurement and weight: HxD: 670x400 mm - weight: 13,5 kg The price is for one unit. All prices are valid Ex-Works, excl.VAT Freight Charges: depending on dimensions and destination Delivery: from D-97753 Karlstadt-Karlburg Subject to prior sale

Packing table with conveyor belt! Aluminium frame work surface made of stainless steel Overall length 2, 20m Working height 0, 90 m Conveyor speed can be adjusted You will find more machines and accessories below: abc://abc.resale.de/angebotelinkd-user.php?myid=35837 & dealer = 1 & order = 1 & or abc://abc.resale.de/angebotelinkd-user.php?myid=35846 & dealer = 1 & order = 1 &

complete set for securing a coordinate measuring machine B-706, the transport securing device is rented out on bail

used approx. 2 m ³ / 2,000 litres polyester tank, GRP tank, transportation tank, Juno-tank, good condition Dimensions: L = 1.66 m 1.10 m = B; H = 1.50 m (without feet). H = (total) 1.75 m Aboveground vertical tank, incl. 4 steel feet/cones, dome on the front, several in - and outlets. The container can be used as a storage tank for water, liquid feed, whey, potato steam skins, molasses, liquid manure, AHL, ASL, seeping juice, canola oil, or as a rain drip tank, etc.. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please give us a call or write, so that we can advise you personally. More information and offers  ...

1 GENKINGER dobby changing trolley type FDCT, year 2002 carrying capacity 400 Kg

Vertical pallet transport

Rectangular, stackable transport container in stainless steel 1.4301, filling volume: 500 l., permissible total weight: 1,197 kg, inlet: 560 mm , outlet via manifold with flange (without ball valve). Minimum wall thickness: 1.5 mm.

Rectangular, stackable transport container in stainless steel 1.4301, filling capacity: 500 l., total max. weight: 1.197 kg, inlet: 560 mm Ø, outlet: Elbow fitting with flange (without ball valve). Wall thickness: 1,5 mm.

TECHNICAL DATA: 12 Pieces