air transport used for sale

SPECIFICATIONS: Heating capacity: 928 kW - 800,000 kCAL/h Maximum operating pressure: 2 bar Fuel: wood waste Electrical power: 10.6 kW COMPLETE WITH: -Damper flap - Chip hopper - Safety thermostat - Operating pressure gauge - Motor variator - Combustion air blower - Spiral screw - Electrical control cabinet - Burner (EcoFlam MAIOR P 35 TL)

Nominal weight of the falling parts: 750 kg Max. number of blows per minute: 105 Kinetic energy: 1900 kg Distance from an axis of the slider up to bed: 750 mm Cylinder diameter: 600 mm Diameter of the plunger: 630 mm Max. headstock travel: 835 mm Dimensions: -Left-to-right: 3940 mm -Front-to-back: 1430 mm Height above floor level: 3260 mm Weight: -With an anvil-block: 25600 kg -Without an anvil-block: 16600 kg

Make: CARRIER Type: 30AWH016H-9 Power: 16kW Three-phase 380V for heating and cooling with built-in pump, expansion tank, control 1" inch connectors NEW Original packaging

Make: CARRIER Type: 30AWH008H Power: 8kW Weight: 120kg Single-phase 230V for heating and cooling with built-in pump, expansion tank, control 1" inch connectors NEW Original packaging

Make: CARRIER Type: 30AWH012HD9 Power: 12kW Three-phase 380V for heating and cooling with built-in pump, expansion tank, control 1" inch connectors NEW Original packaging

Make: CARRIER Type: 30AWH015HD9 Power: 15kW Three-phase 380V for heating and cooling with built-in pump, expansion tank, control 1" inch connectors NEW Original packaging

Air Pressure: 40 bar // Delivery Rate: 1630 m³/h

Air Pressure: 40 bar // Delivery Rate: 950 m³/h

An air cushion machine Brüninghaus (Fromm) is available. Film width: 420mm, max. film roll diameter: 280mm, film length range: 500mm-1000mm, film core diameter: 76mm, film type: AIRPAD, film thickness range: 0.042mm-0.08mm, capacity: 25-49 cycles/min. Machine dimensions X/Y/Z: approx. 2100mm/800mm/1300mm, weight: approx. 270kg. Documentation available. An on-site inspection is possible.

RLA 1213 Clean air extraction system 400V 1.5 KW Volume flow max. 1140 m³/h Suction nozzle 120mm Filter area of 5.1 m² Chip collection volume 135 litres mobile Weight of 121 kg G&STÜ-5131201

Nestro Dust Collector NE 250J ECO Nominal volume flow 2,950m³/h Nominal Volume Flow Vacuum 2.526Pa 5.5Kw Filter area: 22.4m² Outrigger: 250mm

ALMIG Combi 15-10 rotary screw air compressor YOM 2012. Never used. Motor speed 3000 rpm Motor power 15 kW Volume flow m3/min- 1.84 Volume m3/hour- 110 Max. pressure 10 Bar. Air Receiver Capacity 500L

Mäder DLP 1700 HV Direct Acting Air Press Press Direct-acting air presses are used wherever the compressive force is required constantly over a longer distance or where a large immersion depth is required: e.g. when pressing pins, bushings and ball bearings or when forming. DLP 1700 HV Direct-acting compressed air press Compressive force at 6 bar: 17 kN Working Stroke: H mm: 40/60/80 More items - new and used - can be found in our shop! International shipping costs on request!

Several air cushion machines activaTec are available. Production speed: 15m/min, film thickness range: 13mm-40µm, roll length: 700m/1500m. Machine dimensions X/Y/Z: approx. 315mm/300mm/315mm, weight: approx. 10kg. Documentation available. An on-site inspection is possible. The machines are ready for shipment. The picture shows an example unit.

Motor power: 45 kW Nominal flow rate: 7.5 m³/min Maximum working pressure: 10 bar Voltage/Phase: 380V Electrical protection: IP55 Management: Integrated inverter Approximate load dimensions: 1500x1000x1265 mm Estimated weight: about 700 kg The item is sold in the state in which it is, unverified and without warranty of operation. The sale is subject to acceptance by the seller and may be subject to restrictions, in particular for goods destined for countries to which export is required. Auction-ID: A7-39512-4

Sacot CA plank stacker. SCA. SAWMILL 1400 A professional stacker designed for automatic stacking of boards into even, stable and repeatable stacks. An ideal solution for sawmills and wood processing plants, significantly increasing efficiency and comfort of work. TECHNICAL PARAMETERS Stacking Material Length: 770-1400mm Stacking width: 1200 mm Stacking height: 1250 mm Machine dimensions: 4600 × 3700 × 2600 mm (H) Feeding/Receiving: Roller Receiving Table Structure: Steel, Industrial, Heavy Duty Control: Electric + Pneumatic The stacker is perfect for: sawmills, wood processing plants, production lines, production of short and medium elementsEXPANSION OPTIONS (optional): a complete technological line, including: Weinig Hydromat 23c planer 60m/min SACOT Formatizer SACOT stacker

Motor power: 11 kW Nominal flow rate: 1.5 m³/min Maximum working pressure: 10 bar Voltage/Phase: 380V Electrical protection: IP55 Management: Integrated inverter Approximate load dimensions: 1050x700x1050 mm Estimated weight: about 300 kg The item is sold in the state in which it is, unverified and without warranty of operation. The sale is subject to acceptance by the seller and may be subject to restrictions, in particular for goods destined for countries to which export is required. Auction-ID: A7-39512-2

Motor power: 7.5 kW Nominal flow rate: 1.0 m³/min Maximum working pressure: 10 bar Voltage/Phase: 380V Electrical protection: IP55 Management: Integrated inverter Approximate load dimensions: 900x625x860 mm Estimated weight: about 200 Kg The item is sold in the state in which it is, unverified and without warranty of operation. The sale is subject to acceptance by the seller and may be subject to restrictions, in particular for goods destined for countries to which export is required. Auction-ID: A7-39512-1

Heat pump, chiller - air-cooled, Type: Taurus HTAT 055/HE – 130 / 111 kW Manufacturer: MTA S.p.A. Taurus HTAT 055/HE are compact heat pump / water cooling units that are suitable for outdoor installation including with hydronic kit (tank 200 ltr. + P15 pump) for low outside temperature down to -20°C with electron. Fan speed control (EC fans). Heating capacity kW 130 Heating water temp. Exit/inlet: 45 / 40°C Volume flow m³/h 22.5 Available pump pressure bar 1.03 Ambient temperature °C +7 Cooling capacity kW 111 Cold water temp. Exit/Entry: 7 / 12°C Flow rate m³/h 19 Available pump pressure bar 1.26 Ambient temperature °C 32 Refrigerant R 410A Electrical data: Voltage V 400, Frequency Hz 50, Phase Ph 3 Max. power consumption (kW) 60 Max. Current (A) 98 Starting Current Circuit (A) 312 Protection class: IP54 Dimensions: Length mm 3415, width mm 11 ...

Motor power: 15 kW Nominal flow rate: 1.7 m³/min Maximum working pressure: 10 bar Voltage/Phase: 380V Electrical protection: IP55 Management: Integrated inverter Approximate load dimensions: 1050x700x1050 mm Estimated weight: about 300 kg The item is sold in the state in which it is, unverified and without warranty of operation. The sale is subject to acceptance by the seller and may be subject to restrictions, in particular for goods destined for countries to which export is required. Auction-ID: A7-39512-3

Used hot air generator with oil burner Ready for operation at the site

Rooftop Air Conditioner CLIMAVENETA WSM2-T 0354 106.2 kW Cooling capacity: 106.2 kW / 30.2 tons Year of manufacture: 2022 Options: Air filter, Wika air flow sensor, 2 pcs. Belimo damper actuators. Refrigerant circuit: 2 pcs. Heat exchanger: Copper / Aluminum Condenser: Copper / Aluminum Compressors: 4 pcs. Copeland scroll ZP104KCE-TFD-477 (scroll) Number of fans: 2 pcs. + 4 pcs. (centrifugal, EC-fans) Type of refrigerant: R410A Dimensions: 6.1 х 2.25 х 2.41 m Weight: 1780 kg Working hours: 0/0/0/0 h. Condition: Outlet, New

Operating hours 58730 h Technical data: Max. compressed air: 14 bar Ambient temperature, max.: 50°C Refrigerant: R410A, 0.86 kg Connection: 230 V Weight, approx.: 154 kg

Clean air extraction system SCHUKO Vacomat 140/160 XPe display unit - Filter generation motorized, mobile, extraction side right or left, remountable---------- Technical data ---------- test mark: H3 / BGHM HO 193023, extraction nozzle Ã: 1 x 140 / 160 mm, nominal volume flow: 1,447 m³/h, max. vacuum: 2,200 Pa, filter area: 9.5 m², residual dust content: < 0.1 mg/m³, number of bags: 1 piece, motor: 2.2 kW, dimensions (LxWxH): 1,665 x 900 x 1,980 mm, weight: 306 kg, Dust class M: AWN 16- new exhibition machine -

Two mobile industrial air cleaners Trotec that have only been used once are available. Air volume flow: 5700m³/h, negative pressure: 1150Pa, air volume for filter class H: 3000m³/h, min. filter area with H13: 26m², opening diameter: 380mm. Machine dimensions X/Y/Z: approx. 1300mm/800mm/1050mm, weight: approx. 150kg. Documentation available. On-site inspection is possible.

1 Wagner Leopard 3570 airless sprayer with air piston drive. It is for hanging on the wall. About 8m of spray hose are included, and a gun with nozzles, filters, etc. For data see type plate Technical data: Gear ratio: 35:1 Max. air inlet pressure: 7.1 bar Max. working pressure: 250 bar Volume flow rate per double stroke: 70 cm³ Max. stroke rate: 60 DH/min Max. flow rate: 4.2 l/min The system was in operation until recently, is well maintained and perfectly cleaned. Pick-up only in 27404 Zeven.

Galvanized compressed air tank Material: Hot-dip galvanized steel Version: upright Fittings: Safety valve, pressure gauge, Ball valve, test valve Installation data Capacity compressed air tank 270 lt Permissible operating pressure max. 11 bar Operating temperature min. / max. -10 / +80 °C Blow-off capacity safety valve 7.24 m³/min Dimensions and weight Diameter 500 mm Height incl. feet 1685 mm Weight approx. 66 kg Compressed air connection 4 x 3/4 "

Steam traps without pressure losses! In the production of of compressed air, water always falls into the form of of condensate. If this condensate is not reliably separated, the condensate can in the compressed air network and damage to the consumers. Performance data Application for compressors up to 6.3 m³/min Application for filters up to 63 m³/min Operating pressure min. / max. 0.2 / 16 bar Capacity discharge 3 l/h Installation data Operating voltage (without el. Connection cable) 230 V Power consumption 10 W IP65 protection class Dimensions and weight Length x width x height 160 x 69 x 116 mm Connection Admission 1/2" Connection outlet 1 x Ø 12 Weight approx. 0.9 kg

We offer new Fujitsu air conditioners, in packaging. The models are as follows – ARY30UUAN/AOY30UNBWL ARY36UUAN/AOY36UNAXT ABY30UBAG/AOY30UNBWL AUY45UUAS/AOY45UMAXT ARY25UUAN/AOY25UNANL ASY24UBBN/AOY24UNBNL They were stored in a warm warehouse. The price is negotiable.

used vacuum thermoforming machine from Illig in very good condition little used immediately ready for use Dimensions 6 by 5 meters incl. control cabinet and corresponding phereperie devices Pictures to follow

Compressor with built-in air dryer Power: 25 kW Pressure: 8 bar

Compressor with built-in air dryer Power: 25 kW Pressure: 8 bar

We offer for sale a powerful split air conditioner with 6.7 kW cooling capacity, which is ideal for air conditioning offices, server or sales rooms. The device is in perfect technical condition, as it has always been professionally maintained through very short maintenance intervals. A viewing is possible at short notice by arrangement; a proper invoice with VAT will be issued.

SALES MANDATE ITV Orion 40 Ice Machine Approximate production: 40 kg / 24 h Type of ice: solid cube Air cooling Integrated tank Professional use in hospitality Condition: unused Not tested Auction-ID: A7-44748-65

Power 0. 5 Hp, rivets 9-16'', never used Overall dimensions: 300 x 200 x 100 mm Weight: 2 kg Auction-ID: A7-44803-219

22,000 rpm, spindle Ø6 mm, maximum wheel capacity 25 mm, never used Overall dimensions: 250 x 200 x 100 mm Weight: 2 kg Auction-ID: A7-44803-311

SALES MANDATE Brunetti Bakershop Air S Convection Oven 6 Trays Capacity: 6 trays (600 x 400 mm) Distance between guides: 75 mm Temperature range: 30 – 260 °C Power: 10.5 kW Voltage: 400 V three-phase Dimensions (L x W x H): 760 x 760 x 646 mm Weight: 74 kg Cooking modes: convection and mixed (with humidity) Electronic control with programs Professional use for bakery and hospitality Condition: Used (Burnt Plate) Not Tested (Burnt Plate) Auction-ID: A7-44748-133

SALES MANDATE ITV Orion 40 Ice Machine Approximate production: 40 kg / 24 h Type of ice: solid cube Air cooling Integrated tank Professional use in hospitality Condition: unused Not tested Auction-ID: A7-44748-66

4 pneumatic tools with accessories Overall dimensions: 400 x 400 x 300 mm Weight: 10 kg Auction-ID: A7-44803-281

Gas-powered, power 10.5 kW, output 9. 000 kcal/h, never used Overall dimensions: 500 x 200 x 200 mm Weight: 5 kg Auction-ID: A7-44803-273

Standard descriptionPROOFING ROOM AIR CONDITIONER type PG1000PG1000 is a plug & play unit that is used in existing proofing rooms. Easily connects to the on-site water and power supply. TEMPERATURE RANGE:â€" Heat / adjustable: +200 / +450 Câ€" Humidity / adjustable: 60% / 95% R.H.Technical information   kW   capacityVoltage/ volt (as required)     kW 6.5 PG1000 approx. 10 m2AccessoriesCustomized optionsLILLNORD has developed many options/many accessories in cooperation with its customersAutomatic emptying of the

with automatic emptyingStandard descriptionFERMENTATION ROOM AIR CONDITIONER type PG1000PG1000 is a plug & play unit that is used in existing proofing rooms. Easily connects to the on-site water and power supply. TEMPERATURE RANGE:â€" Heat / adjustable: +200 / +450 Câ€" Humidity / adjustable: 60% / 95% R.H.Technical information   kW   capacityVoltage/ volt (as required)     kW 6.5 PG1000 approx. 10 m2AccessoriesCustomized optionsLILLNORD has developed many options/many accessories in cooperation with its customersAutomatic emptying

Parking air conditioner AEG AXP26U338CW 990 watts, coolant R290, cooling capacity 2600 watts

Hot air fryer PHILIPS TWIN Turbo Star, used

Overview This industrial air dryer was manufactured in 2012 by the Swedish company Atlas Copco. The FD760 VSD model is a refrigeration-type dryer designed for continuous operation in compressed air systems up to 14 bar, with a maximum flow capacity of 760 L/s. The unit is still installed and connected, has been regularly maintained, with the latest maintenance completed in August 2025, and is in excellent operating condition. It is immediately available and can be inspected on site. Technical data  Application: Air dryer for 7 7-bar low-pressure compressor Flow Capacity: 760 L/s Operating Pressure: Up to 14 bar Power Supply: 5.6 kW Refrigerant: R410A Weight: 380 kg

Compressed air filters, fine filters, filters, flange filters -Manufacturer: Zander, flange filter type F17 -Filter type: F 17 XA D 1st stage/filter element 3075 X -Content: 20 liters -Operating pressure: 16 bar -Connection: DN 80 -Price per piece - Quantity: 2 pieces -Dimensions: 380/300/H1170 mm -Weight: 72kg

Compressed air filters, fine filters, filters, flange filters -Manufacturer: Zander, flange filter type F17 -Filter type: F 17 XA D 2nd stage / Filter element 3075 A -Contents: 20 liters -Operating overpressure: 16 bar -Connection: DN 80 -Price: per piece -Quantity: 2 pcs. -Dimensions: 380/300/H1170 mm -Weight: 72 kg

High pressure radial fan, dust extractor fan, exhaust gas extractor, welding smoke extractor, extractor fan, pressure fan, vacuum fan, ventilation fan, radial fan -Motor power: 0.139 kW -Speed: 1600 rpm -Volume output: unknown -Connection air duct: 90 x 90 mm -Price per piece -Quantity: 2 pieces -Dimensions: 280/165 / H230 mm -Weight: 3.1kg / piece

Compressed air filter, fine filter, filter, pre-filter, intake air filter, air filter housing, air filter -Manufacturer: Mann & Hummel, Mann-Piclon air filter housing -Part Number: 45 160 92 901 -Inlet/Outlet: Ø 65/61 mm -Quantity: 47 combination air filters available -Price: per piece -Dimensions: Ø 225/305 mm -Weight: 2.35 kg

Industrial vacuum cleaners, vacuum cleaners, dust extractors, industrial vacuum cleaners, floor vacuum cleaners, safety industrial vacuum cleaners, polyurethane hose, suction hose, hose, vacuum cleaner hose, spiral hose, suction hose, hose connections, hand pipe, hose connector -Manufacturer: Nilfisk, Bent End Plastic Tube Ø 40 VA unused OVP -Type: 107402631 -Diameter: Ø 45 mm -Number: 4x pipe available -Price: per piece -Dimension: Ø 48 x 320 mm -Weight: 0.1 kg/piece