127,395 used machines on RESALE, but how to find them? Machine Search
Nominal mass of falling parts, taking into account the mass of the upper stamp (500 kg.), Kg. 5000 Actual mass of falling parts without top stamp, kg. 5030 Effective kinetic energy of falling parts at full successive impacts, kgc m 12500 The greatest working stroke of a woman, mm. 1300 The smallest height of dies without shanks, mm. 400 Distance between guides in the light, mm. 800 The length of the woman in the direction perpendicular to the front of the hammer, mm. 1180 Steam (air) pressure before entering the cylinder, atm. 7-9 Nominal mass of the upper die, kg 500 The largest mass of the upper die, kg. 1500 The highest permissible steam temperature, ⁰C 200 weight 145-148ton, weight of anvil block 75+22 ton.
Capacity :10 tons, Weight of falling part,nominal mass of drop parts without upper instr.:9 tons, Effective working kinetic energy after blow :25000 kg mtr., Max. working ram stroke :1400 mm, Max no of blows : 30/min , Distance between slides : 1000 mm, Shut height : 775 mm , Ram size front to back :1200 mm, Bolster size front to back :1200 mm, Air pressure : 7-9 MPA , Height of instruments : 450 min., Die-holder front to back dimensions: 1400 mm, Height above floor level: 7270 mm, Hammer dimensions : 4400x10420x2700 mm, Weight (less anvil block): 73.5 ton, Weight of anvil block : 203.8 tons.
Not tested; Auction-ID: A1-48399-76
Auction-ID: A1-47406-257
Nominal weight of the falling parts: 750 kg Max. number of blows per minute: 105 Kinetic energy: 1900 kg Distance from an axis of the slider up to bed: 750 mm Cylinder diameter: 600 mm Diameter of the plunger: 630 mm Max. headstock travel: 835 mm Dimensions: -Left-to-right: 3940 mm -Front-to-back: 1430 mm Height above floor level: 3260 mm Weight: -With an anvil-block: 25600 kg -Without an anvil-block: 16600 kg
Auction-ID: A1-47406-258
EPGA11DAV37 Auction-ID: A7-48625-4
EPGA11DAV3 Auction-ID: A7-48625-10
Makita DMP180Z battery air pump 18V (body) Auction-ID: A1-40893-127
Hofftech 12V Air Compressor 250 psi Auction-ID: A1-40893-288
Hugo Beck SL 412/25 Shrink Tunnel Hugo Beck Shrink tunnel SL 412/25 380 V 6/9 KW power Air circulating blower Cooling fans 2 x control heater 1 x basic heating 1 x auxiliary heater with chain transport Metrics Tunnel length: 120 cm Machine: LxWxH = 166x64x26cm More items - new and used - can be found in our shop! International shipping costs on request!
Hofftech 12V Air Compressor 250 psi Auction-ID: A1-40893-44
used
T9STELA AIR HEATER indirect 2000 KW, SLI 2000; Weishauptbrenner L9T OIL Tel. 01715213204
Power: 650 Watt tank capacity: 5,5 l length: 515 mm width: 430 mm height: 825 mm weight of the machine ca.: 36 Kg Professional 650 watt construction dryer Recommended room size 40 - 50 m², height max. 2.6 m Sound pressure level approx. 52dB Dehumidification capacity 28 L/D - 51 L/D The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Water flow rate 30-150l/h Flow meter with manual control valve Solenoid valve for water and compressed air. Pressure regulators for water and air Special nozzle for injecting water and air Mounted on a plate
Immediately available completely overhauled shop air coolers, we also have used ones in stock.
Evaporator Küba SGB 073C, YOC 2006 Capacity 16.3 liters Three fans sucking 630 watts Velvet Injected Valve Built-in Suitable for TK or plus cooling In very good condition
Immediately available completely overhauled in-store air coolers, we also have used ones in stock
Immediately available Completely overhauled in-store air coolers
Immediately available used shop air duct for SBA 6/8/12/16 M816
Refrigerant: R32 Auction-ID: A7-48794-422
4690 KW Tubetech Air Cooled Condenser ZBW-R-1F-4/1 Condenser from 2018, condenses up to 8 t/h steam, like new, was used as a steam condenser of a 1,500 KW turbine. complete (closed unit with control), 1 available, 4,690 kW, 1 fan. Manufacturer: Tubetech Model No.: ZBW-R-1F-4/1- 6550×2738-DCC63B8-4-1 Serial Number: 1381-1384 Type: Air Cooled Condenser/Steam Condenser Fans: 1 Power [kW]: 4,690 Year of construction: 2018
As well as electric heating, rotary knob is missing Auction-ID: A1-46485-126
Kaeser SK26 Air compressor Serial: 2610494 Air compressor, 15Kw, 7.5Bar, rate motor speed 3000/min, 3Ph
Kaeser SK26 Air compressor Serial: 264957 Air compressor, 15Kw, 7.5Bar, 2.4M3/min, 3Ph
Kaeser SK26 Air compressor Serial: 2610493 Air compressor, 15Kw, 7.5Bar, rated motor speed 3000min, 3Ph
maximum number of results exceeded
please refine your search
10 € 
