air rings for used for sale

Description: Kit in case consisting of 6 pneumatic tools, including various accessories Approx. Onsite Dimension. (l x w x h): 400 x 400 x 300 mm, weight approx.: 10 kg

Description: Kit in case consisting of 6 pneumatic tools, including various accessories Approx. Onsite Dimension. (l x w x h): 400 x 400 x 300 mm, weight approx.: 10 kg

Description: Kit in case consisting of 6 pneumatic tools, including various accessories Approx. Onsite Dimension. (l x w x h): 400 x 400 x 300 mm, weight approx.: 10 kg

: 5,5 kW : 10 bar : - l : 850 l/min : 680 l/min container volume: 270 l : 400 V : 1200 x 800 x 1970 mm : 204 kg Stationary piston compressor with refrigeration dryer, fine filter, Condensate conditioner for oil-water separation and automatic condensate drain The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Output: max. 3,150 m³/h Negative air pressure: max. 2,250 PA Voltage: 3 x 400 V Motor power: 3 kW Waste container volume: 72 l Compressed air consumption: 73 Nm³/h Suction nozzle: 1 x 160 mm / 1 x 200 mm Approx. Onsite Dimension. (l x w x h): 1,100 x 1,100 x 2,700 mm, weight approx.: 260 kg

Clean Air System AOP Desktop, type DT 500 DeskAir PHI, For your workplace, whether in the office or in the home office, cleans the air and improves the indoor climate., - Length of the UV-C tube: 5 but has the, - power of 2.5, - Flow rate of the integrated fan:, - without blower, - Voltage: 230 V incl. voltage converter, - (integrated in the desktop) and 12 V plug, - Power: 12 volts 1 amp, - Case material: polymer, -, power: Room volume/ capacity: 74 m³ in 24 h, Dimensions / weight: Dimensions L x W x H: 152 x 76 x 300 mm, weight: 1 kg

Description: The machine is in working condition. , no. of cutting heads: 1, Cutting type: plasma fusion cutting, table surface area l x w : 3100 x1500 mm, weight approx.: 2,000 kg, Approx. Onsite Dimension. (l x w x h): 5,000 x 2,450 x 1,700 mm

Description: Powder painting line Input dimensions: 2100mm high x 1970 mm wide Side walls can be closed to work with a width of: 1500 mm , Vertical travel of the booth: 2130 mm max height. Automatic spray gun working area: 2850 mm max. , Extractors and conveyor belt Burners and gas valve need to be checked. Washing and degreasing area Automatic painting with 4 spray guns (2 on each side) Manual painting area, 2 stations Drying area 2007 Estimated year of manufacture This machine hasn´t worked more than two years. Estimated working hours 1000 Approx. Onsite Dimension. (l x w x h): 40,000 x 8,000 x 3,000 mm, weight approx.: 44,000 kg

IPD Kit: shirt; piston; rings and rings Part number: 9Y-7212

Material: Stainless steel 1.4571 Drive: 15 KW / 400-4000 RPM Weight: 1100 kg Mixer: Turbulent - mixing plant Speed mixing plant: approx. 400-4000 RPM Operating voltage: 400 V Control voltage: 230 V Frequency: 50 Hz Protection class: IP 54; Additionally available: --> Cabinet --> Documentation.

Strong Ball bearing start-up ring set 1x Ball Bearing Idle Brushes (62x30mm) 1x Washer Starting rings: 75, 80, 85, 90, 95, 100, 105, 110, 115, 120mm

Cable protection ring -Type: KSR-910 light gray -Cable protection rings per package: 25 -Packages: 15 pieces -Price: per package -Weight: 3.6 kg

Cutting rings, approx. 650 pieces PAGUS D 8 L ( D8L ) Inner diameter: Ø 8 mm outer diameter: Ø 11 mm cutting ring length: 9 mm Material: Steel, galvanized New ! Dimensions ( packaging ) 130 x 130 x 80 mm

Retaining rings, for bores, 675 pieces GROSS I 75 x 2,5 DIN 472 bore diameter: 75 mm thickness: 2.5 mm Material: spring steel Other quantities on request ! New ! Dimensions ( packaging ): 320 x 230 x 220 mm

Retaining rings, for shafts, 50 pieces SCHÜCO Art. -No.: 205945 A 20 x 1,2 DIN 471 Shaft diameter: 20 mm Thickness: 1.2 mm Material: spring steel New ! Dimensions ( packaging ): 70 x 50 x 35 mm

Retaining rings, for shafts, 50 pieces SCHÜCO Art. -No.: 205946 A 22 x 1,2 DIN 471 Shaft diameter: 22 mm Thickness: 1.2 mm Material: spring steel New ! Dimensions ( packaging ): 70 x 50 x 35 mm

Retaining rings, for shafts, approx. 1000 pieces PAGUS A20A110-BLN 20 x 1,2 DIN 471 Shaft diameter: 20 mm Thickness: 1.2 mm Material: spring steel, galvanized New ! Dimensions ( packaging ): 135 x 90 x 100 mm

Vulcanized fiber sealing rings PAGUS Ø 11,9 / 15.9 x 1.5 mm inner diameter: Ø 11.9 mm outer diameter: Ø 15.9 mm material thickness: 1.5 mm quantity: 1.0 kg quantity: approx. 7000 pieces new ! Dimensions ( packaging ): 260 x 220 x 160 mm

Vulcanized fibre sealing rings PAGUS Ø 12,1 / 15.5 x 1.5 mm Inner diameter: Ø 12.1 mm outer diameter: Ø 15.5 mm material thickness: 1.5 mm Quantity: 1.0 kg Quantity: approx. 11000 pcs New ! Dimensions ( packaging ): 260 x 220 x 160 mm

Vulcanized fibre sealing rings PAGUS Ø 8,6 / 17.2 x 2.2 mm Inner diameter: Ø 8.6 mm outer diameter: Ø 17.2 mm Material thickness: 2.2 mm Quantity: 1.0 kg Quantity: approx. 2000 pcs New ! Dimensions ( packaging ): 260 x 220 x 160 mm

Vulcanized fibre sealing rings PAGUS Ø 6,2 / 10.0 x 1.5 mm Inner diameter: Ø 6.2 mm Outer diameter: Ø 10.0 mm Material thickness: 1.5 mm Quantity: 1.0 kg Quantity: approx. 13000 pcs New ! Dimensions ( packaging ): 260 x 220 x 160 mm

Vulcanized fibre sealing rings PAGUS Ø 6,2 / 12.0 x 1.5 mm Inner diameter: Ø 6.2 mm Outer diameter: Ø 12.0 mm Material thickness: 1.5 mm Quantity: 1.0 kg Quantity: approx. 6500 pcs New Dimensions ( Packaging ): 260 x 220 x 160 mm

Vulcanized fibre sealing rings PAGUS Ø 5,2 / 8.9 x 1.5 mm Inner diameter: Ø 5.2 mm Outer diameter: Ø 8.9 mm Material thickness: 1.5 mm Quantity: 1.0 kg Quantity: approx. 14000 pcs New dimensions ( packaging ): 260 x 220 x 160 mm

Vulcanized fibre sealing rings PAGUS Ø 10,2 / 13.9 x 1.5 mm Inner diameter: Ø 10.2 mm Outer diameter: Ø 13.9 mm Material thickness: 1.5 mm Quantity: 0.35 kg Quantity: approx. 3100 pcs New ! Dimensions ( packaging ): 260 x 220 x 160 mm

Rubber sealing rings, 100 pieces PAGUS Ø 40 / 55 x 6.5 mm Inner diameter: Ø 40 mm outer diameter: Ø 55 mm material thickness: 6.5 mm Cross-sectional profile: Rectangle Quantity: 100 pieces New ! Dimensions ( Packaging ): 210 x 150 x 100 mm

Weld studs, ceramic rings, tip ignition studs, head studs -Welding stud: with ceramic rings, 40 different types -Number/ version: see photo parts list -Delivery/Price: only complete -Dimension: 1200/800/H120 mm -Total weight: 64 kg

Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, idler rollers, support rings, buffer rings, plastic rings -Support rings: for conveyor belt rollers, transport rollers with a diameter of 60 mm -Size: Ø 65/90 x 25 mm -Number: 33x support rings available -Price: per piece / minimum purchase 5 pieces -Total dimensions: Ø 90 x 25 mm -Weight: 0.1kg/pc

Description: Heating ring , Diameter 145 x 171 mm, , 4500 watts, , 230 volts , Heating ring Diameter 140 x 155 mm, , 3500 watts, , 230 volts Heating ring , Diameter 190 x 95 mm, 1950 watts, 240 volts , + 2 spacer rings Approx. Onsite Dimension. (l x w x h): 800 x 600 x 200 mm, weight approx.: 15 kg

Description: Size 1 to 29 mm, set not complete Approx. Onsite Dimension. (l x w x h): 700 x 300 x 500 mm, weight approx.: 30 kg

Air cooler water cooler DMA 315 6.7 m ³/h 28 ° c air-water cooler cooler aeri Air-water cooler Manufacturer: -. Model: DMA 315 M35B 6.7m ³/h m. ABB electric motor slightly damaged on the Panel Year of construction: 1999 Used functional & in good condition. Off bearing resolution

After cooking stove, thermal oil, Formcook, frying line (CFS, GEA, Koppens, Alco, Stork) - continuous grilling line - Total length outside: 6 m - Total width: approx. 1.300 mm - Height of the gallows: 1.200 mm - Gallows for chain hoist - 5 floors above each other - Conveyor belt of wire belt: 600 / 2,35 / 7 / 12,7 - Double-walled floor and hood, isolated

After cooking stove, thermal oil, Formcook, frying line (CFS, GEA, Koppens, Alco, Stork) - serial: Sprematec - length: approx. 10 m - width: 1350 mm inside / 1518 mm outdoor - heated thermal oil - year: 10/2003

Advantages of Aflatek AirPro500W: -Large 500l air tank -12.5bar maximum pressure. -Powerful 7.5kW belt-driven motor. -3 cylinder multistage air compression. -Mounted on 4 rubber wheels, portable. Technical data: Power supply , V: 3Ph 400V 50Hz Motor Speed, rpm: 730 Motor power, kW: 7.5 Motor power, HP: 10 Air supply, L/min: 800 Maximum pressure. Bar: 12.5 Maximum pressure, Psi: 181 Air tank, L: 500 Dimensions(length x width x height), mm: 1840x600x1130 Weight, kg: 260 Shipping details: Packaging: Plywood box on a pallet Dimensions(length x width x height), mm: 1900x650x1200 Weight, kg: 280 Tracking: Available -Price is with VAT 21% included. Contact us if you need a VAT free offer. -For shipping costs contact us directly.

Advantages of Aflatek Air50: -50l air tank, longer operation time. -Mounted on 2 rubber wheels, portable. -Easy to use. -Requires little maintenance. Technical data: Power supply , V: 230 Motor Speed, rpm: 2850 Motor power, kW: 1.8 Motor power, HP: 2.5 Air delivery, L/min: 206 Maximum pressure. Bar: 8 Maximum pressure, Psi: 116 Air tank capacity, L: 50 Dimensions, (length x width x height), mm: 840x430x690 Weight, kg: 30 Shipping details: Packaging: Carton box Dimensions, (length x width x height), mm: 850x450x710 Weight, kg: 32 Tracking: Available -Price is with VAT 21% included. Contact us if you need a VAT free offer. -For shipping costs contact us directly.

Manufacturer: Kaeser Type: FC-138-D Maximal pressure: 16 bar Temperature range: 1 - 66 celsius Volume: 9,4 l

Weiss Air Conditioning Ultraclean ULTRA 55.2  Manufacturer: Weiss Klimatechnik GmbH Device type: Ultraclean, ULTRA 55.2 DXU Year of construction: 2007 Nachheitzer 10.5 kW Cooler: 12.7 kW Humidifier: 3 kg/h Filter class: F7 Supply air flow 2500 m{h ext. pressing 200

Description: max. working pressure: 10 ,bars rated ,power: 5,5 kW working hours total: approx. 1492 hrs working hours under load: approx. 531 hrs time left till maintenance: approx. 1508 hrs Please note: compressors are delivered free of liquids, media, oils and fluids inside! suction capacity: 5.5 kW, operating pressure: 10 bar, modelname / number: AIRCENTER SM 10, year of manufacture: 2,022, Approx. Onsite Dimension. (l x w x h): 630 x 594 x 1,716 mm, weight approx.: 410 kg

- Hand & foot control - integrated ambos - solid substructure Specifications: - Hammer weight: 40 kg - Lifting height: 230 mm - Projection: 240 mm - Cylinder Ø: 140 mm - Motor power: 4 kW - Voltage: 400 V - Dimensions WxHxD: 700 x 1900 x 1200 mm - Weight: approx. 900 kg

Type 5 Nominal weight of falling parts 1750 kg Impact energy, not less than 4878kgm Number of strokes per minute 85 Max. ram stroke 890mm Diameter of ram 455mm Ram pallet face 405x305mm Anvil pallet face from floor 535mm Height above floor 4040mm Baseplate 4405x2085mm Motor rating 110 kW Weight 40000kg Weight without anvil block 25000kg

Air forging hammer Stanko MB 4134 Year of manufacture: 1988 Nominal weight of falling parts, kg: 250 Energy of impact, Kj: 5,6 The greatest number of impacts in a minute: 150 Ram axis-to-frame distance, mm: 420 Working zone daylight, mm: 450 Die impression size, mm: 510 x 80 Main electric motor power kW: 22 Weight of a hammer with an anvil-block, kg: 7850 Price 6500 EUR

Nominal mass of falling parts, taking into account the mass of the upper stamp (500 kg.), Kg. 5000 Actual mass of falling parts without top stamp, kg. 5030 Effective kinetic energy of falling parts at full successive impacts, kgc m 12500 The greatest working stroke of a woman, mm. 1300 The smallest height of dies without shanks, mm. 400 Distance between guides in the light, mm. 800 The length of the woman in the direction perpendicular to the front of the hammer, mm. 1180 Steam (air) pressure before entering the cylinder, atm. 7-9 Nominal mass of the upper die, kg 500 The largest mass of the upper die, kg. 1500 The highest permissible steam temperature, ⁰C 200 weight 145-148ton, weight of anvil block 75+22 ton.

Capacity :10 tons, Weight of falling part,nominal mass of drop parts without upper instr.:9 tons, Effective working kinetic energy after blow :25000 kg mtr., Max. working ram stroke :1400 mm, Max no of blows : 30/min , Distance between slides : 1000 mm, Shut height : 775 mm , Ram size front to back :1200 mm, Bolster size front to back :1200 mm, Air pressure : 7-9 MPA , Height of instruments : 450 min., Die-holder front to back dimensions: 1400 mm, Height above floor level: 7270 mm, Hammer dimensions : 4400x10420x2700 mm, Weight (less anvil block): 73.5 ton, Weight of anvil block : 203.8 tons.

Nominal weight of the falling parts: 750 kg Max. number of blows per minute: 105 Kinetic energy: 1900 kg Distance from an axis of the slider up to bed: 750 mm Cylinder diameter: 600 mm Diameter of the plunger: 630 mm Max. headstock travel: 835 mm Dimensions: -Left-to-right: 3940 mm -Front-to-back: 1430 mm Height above floor level: 3260 mm Weight: -With an anvil-block: 25600 kg -Without an anvil-block: 16600 kg

Case erector APE model Form 1200 Year: 1998 Speed: 900 c/h Gluer Mesa Included conveyor

Carton forming machine APE mod. FORM 1200 BB Machine for bag in box Speed: 900 c/h Year: 2001 Hot melt closing box. Safety protections.

Box forming machine APE – FORM 1200 HM Year: 1996 Speed: 900 C/H Gluer NORDSON Safety protections.

Box forming machine APE BAG IN BOX | FORMA BB HM Year: 2012 Speed: 1.000 cartoni/h Machine without gluer Safety protections.

Box forming machine TMG | FORMEC Year: 2002 Speed: 5.000 bph Gluer NORDSON Safety protections

Box forming machine SGE | 2007 Year: 2007 Speed: 8.000 bph Model: Formacartoni Gluer included Safety protections

Forklifts, forks, forks with anti-slip coating Payload: approx. 2.5 ton. Tine length: 1600 mm Tine width: 100 mm Tine thickness: 50 mm (40 mm metal + 10 mm rubber coating coating)Fork carrier height: 405 mm - suitable for tine holder: FEM 2 Form B - Rubber coating as anti-slip coating and for protecting transported goods ? Rocker arm lock Net weight: 145 kg mint condition, unused For a 2.5 ton. Forklift.; used