127,590 used machines on RESALE, but how to find them? Machine Search
Used Air Cooled Condensor Güntner AGVH 080.3A/2x4N(D).E, build in 2007. This used Condensor has 8 fans: - kW / - RPM / Ø = 800 / 153600 m³/h Specifications: Our internal inventory No. 7428 Brand Güntner Type AGVH 080.3A/2x4N(D).E Product type Air Cooled Condensor kW 677 (nh3) Number of Fans 8 Air Flow in m³/h 153600 Surface (m2) 2003 Sizes 8100x2300x1800 mm (LxWxH) Remarks | y.o.b. 2007 // Fan: - kW / - RPM / Ø = 800 Amount in stock 2
Granule dryer, compressed air dryer, granulate drying plant, adsorption dryer -Manufacturer: Zander, adsorption dryer type K1300MS -Operating pressure: 7 bar, max. 16 bar -Container capacity: 200 litres each -Individual components: see photos -Transport dimensions: 1250/750/H1960 mm -Weight: 684 kg
Compressed air filter, fine filter -Connection: 2 inch -Number: 3 filters available Price: per piece
Air cooler, evaporator, cold storage, refrigerated container, cold room -Number: 2x fans 0.58 kW 1200 watts -Weight: 16 kg
Air filter -Type: 6.0690.16.7.0110 -Quantity: 8 pieces available -Price: per piece
Compressed air breathing apparatus, respiratory protection -Handover: in its current condition as inspected -electric pump with emergency hand crank -Distributor: with pressure gauge -Hose -Box -Weight: 100 kg
Compressed air breathing apparatus, respiratory protection -electric pump with emergency hand crank -Distributor: with pressure gauge -Hose -Box -Handover: in its current condition as inspected -Weight: 100kg
Rotary actuator for air flaps, air flap rotary actuator -Hollow shaft mount: Ø 32 mm -230 VAC -Protection class: IP 54 -20 Nm 90° -Weight: 1.7 kg
WIWA High Pressure Pump 235.42R / 38042, YOC 2000 With high flow rate, ideal as a feed pump for airless sprayers (united for medium and low viscosity coating materials) Material guide in stainless steel (suitable for water-based paints) Gear ratio: 42:1 Air inlet pressure max. 8 bar Flow rate per double stroke 235 cm3 Flow rate max. 38 l/min. Maximum permissible operating pressure 335 bar Piston diameter of the air motor 230 mm Piston stroke of the air motor 120 mm
Rotary actuator for air flaps, air flap rotary actuator -Hollow shaft mounting: approx. Ø 32 mm -24 VAC -Protection class: IP 54 -20 Nm 90° Price: per piece Quantity: 1 available -Weight: 1.8 kg
ALKO ECO-JET 35/3N clean air extraction Year of construction: 2004 M-Nr.: 33184130 Suction supports: ø250 mm Length: 2.925 mm Width: 1,230 mm Height: 3,440 mm Weight: 816 kg Capacity: 3,000 m3 /uur Pressure: 3,050 Pa Power supply: 4.kW, 380V, 9 Amp Filter surface: approx. 23 m2 Cleaning: compressed air Noise: 77 dB(A)
Holtrop Jansma clean air extraction with swivel lock, flame suppression device & fabric protection damper Brand: Holtrop Jansma clean air extraction Type: MSO 350/300s Year of construction: 2015 M-Nr.: Woo560825S , 5960MS Clean air extraction: MSO 350/300 with star wheel swivel lock Intake supports: ø300-350 mm Length: 2.925 mm Width: 1,230 mm Height: 3,440 mm Weight: 740 kg Capacity: 7,900 m3 /hour Pressure: 1,965 Pa Power supply: 7.5 kW, 380V, 9 Amp Filter surface: 40 m2 Filter tubes: 45 pcs. Length filter tubes: 1,450 mm Diameter filter tubes: 200 mm Cleaning: included Noise: 77 dB(A) Fire protection: sprinkler installation with fire brigade connection Flame protection flap: 70°C melt cartridge Condition: Fully functional tested Optional: Automatic fire extinguishing: € 1.750 Return air - with summer-winter slider: € 350
Nominal mass of falling parts, taking into account the mass of the upper stamp (500 kg.), Kg. 5000 Actual mass of falling parts without top stamp, kg. 5030 Effective kinetic energy of falling parts at full successive impacts, kgc m 12500 The greatest working stroke of a woman, mm. 1300 The smallest height of dies without shanks, mm. 400 Distance between guides in the light, mm. 800 The length of the woman in the direction perpendicular to the front of the hammer, mm. 1180 Steam (air) pressure before entering the cylinder, atm. 7-9 Nominal mass of the upper die, kg 500 The largest mass of the upper die, kg. 1500 The highest permissible steam temperature, ⁰C 200 weight 145-148ton, weight of anvil block 75+22 ton.
Capacity :10 tons, Weight of falling part,nominal mass of drop parts without upper instr.:9 tons, Effective working kinetic energy after blow :25000 kg mtr., Max. working ram stroke :1400 mm, Max no of blows : 30/min , Distance between slides : 1000 mm, Shut height : 775 mm , Ram size front to back :1200 mm, Bolster size front to back :1200 mm, Air pressure : 7-9 MPA , Height of instruments : 450 min., Die-holder front to back dimensions: 1400 mm, Height above floor level: 7270 mm, Hammer dimensions : 4400x10420x2700 mm, Weight (less anvil block): 73.5 ton, Weight of anvil block : 203.8 tons.
Nominal weight of the falling parts: 750 kg Max. number of blows per minute: 105 Kinetic energy: 1900 kg Distance from an axis of the slider up to bed: 750 mm Cylinder diameter: 600 mm Diameter of the plunger: 630 mm Max. headstock travel: 835 mm Dimensions: -Left-to-right: 3940 mm -Front-to-back: 1430 mm Height above floor level: 3260 mm Weight: -With an anvil-block: 25600 kg -Without an anvil-block: 16600 kg
Singlesplit air conditioning part Auction-ID: A1-41275-128
Refrigerated compressed air dryer from 2004, complete (closed model) 1 available 1100 m3/h, 12 bar Manufacturer: Arctic Star Zander Model No.: AS1100 Type: Refrigerated compressed air dryer Serial Number: 2794660001 Volumetric flow rate [m3/h]: 1,800 Pressure inlet [bar]: 12 Power connection [KW]: 3 Year of construction: 2004 Weight [kg]: 208 Dimensions LxWxH [cm]: 92x97x112
Not tested; Auction-ID: A7-44871-76
Hugo Beck SL 412/25 Shrink Tunnel Hugo Beck Shrink tunnel SL 412/25 380 V 6/9 KW power Air circulating blower Cooling fans 2 x control heater 1 x basic heating 1 x auxiliary heater with chain transport Metrics Tunnel length: 120 cm Machine: LxWxH = 166x64x26cm More items - new and used - can be found in our shop! International shipping costs on request!
used
T9STELA AIR HEATER indirect 2000 KW, SLI 2000; Weishauptbrenner L9T OIL Tel. 01715213204
• Nominal temperature 300 °C • Interior volume 52 l • Interior dimensions (W x D x H) 403 x 339 x 380 mm • 2 chrome-plated slide-in grates • Digital temperature control • Temperature selector limiter • Speed control circulating air fan • Fresh air filter, volume flow 10 m3/h • Without air flap adjustment • Temperature protection class 2 • Last check 11/2021 • Drive 220V/50Hz/1,5kW • Without under-table
Water flow rate 30-150l/h Flow meter with manual control valve Solenoid valve for water and compressed air. Pressure regulators for water and air Special nozzle for injecting water and air Mounted on a plate
Immediately available completely overhauled shop air coolers, we also have used ones in stock.
maximum number of results exceeded
please refine your search
10 € 
