air duct used for sale

feed pressure: 10 bar Number of working hours: 69.551 / 38.921 h total power requirement: 11 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Panel thickness: 8 - 50 mm Thickness of the edges: 0,4- 3 mm Feed speed 8 - 11 m / min PU pressure rollers Equipment: Squaring unit, 2 motors 2,2 kW Panel edge heating Edge magazine for coil and strips Hot melt application with roller Airtec AT4510 unit The Airtec aggregate is positioned so you can use Airtec or the standard glue pot Motorized side pressure unit End trims, 2 motors, pneumatic positioning straight and with chamfer trimming unit above / below Contour trimming unit Profile scraping unit Glue scraping unit Polishing unit Detergent spray system central lubrication

Fixators, leveling units, leveling elements, machine foot, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot -Fixators: for machine tools and systems -Minimum height: 75 mm -Max. height: 95 mm -Price: per piece -Quantity: 4 pieces -Dimensions: 230/180/H80 mm -Weight: 12.3 kg/piece

radial fan, dust extraction blower, fan, extraction, dust blower, blower -Manufacturer: Airheat, radial fan with soundproof housing -Type: RDH-500-11.0 -Volume flow rate: 20000 m³/h -Motor: Hoyer 11 kW 1460 rpm -Dimensions: see technical drawing in the photos -Overall dimensions: 1800/1110/H2900 mm -Total weight: 584 kg

Fixators, leveling units, leveling elements, machine base, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot, spring elements -Manufacturer: Air Loc Schrepfer, leveling elements 4 pieces for machine tools and systems -Type: GLV 150 -Height: 32 mm -Price: complete -Dimensions each: 140/140/H32 mm -Weight 2.5 kg/piece

Fixators, leveling units, leveling elements, machine feet, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot -Fixators: for machine tools and systems -min. height: 75 mm -Max. Height: 90 mm -Price: per piece -Number: 6 piece -Dimensions: 245/110/H85 mm -Weight: 11.1 kg/piece

Pneumatic cylinder, air cylinder, pneumatic piston, air piston, standard cylinder -Stroke travel: 100 mm -Piston diameter: 80 mm -Piston rod: Ø 25 mm -Total length: 320 mm -Total length extended: 420 mm -Quantity: 2 available -Price: per piece -Dimensions: 96/96/H320 mm -Weight: 4.35 kg

Digestorium exhaust system for pharmacies, chemistry and medicine -Interior dimensions: 540/850 / H900 mm -Stainless steel version -Glass door front -With Camfit filter cartridge -Connection: 0.085 kW -Type suction: EB 225 -with extractor hood -Dimensions: 675/900/H1200 mm -Weight: 100 kg

Ventilation system, comfort compact ventilation, ventilation control, ventilation device control -Manufacturer: Aircool WGB control ventilation device -Type: unfortunately no exact type designation -Individual components: see photos -Quantity: 19x controls available -Price per piece -Dimensions: 380/240/H415 mm -Weight: 14.7 kg/pc.

Compressor, compressed air unit, piston compressor, quiet running compressor, compressor for dentistry, quiet running compressor -Manufacturer: Jun-Air, quiet compressor type OF301 -Motor power: 250 W -max. pressure: 8 bar -Number: 2x compressor available -Price: per piece -Dimensions: 220/160/H230 mm -Weight: 9.2 kg/piece

Fixators, leveling units, leveling elements, machine base, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot, spring elements -Manufacturer: Air Loc Schrepfer, leveling elements 4 pieces for machine tools and systems -Type: GLV 150 -Height: 30 mm -Price: complete -Dimensions each: 145/145/H30 mm -Weight 1.7 kg/piece

Fixators, leveling units, leveling elements, machine base, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot, spring elements -Manufacturer: Air Loc, leveling elements 2 pieces for machine tools and systems -Type: GLV 110 -Height: 25 mm -Shipping/Price: complete -Dimensions each: 125/125/H25 mm -Weight 1.2 kg/piece

Fixators, leveling units, leveling elements, machine foot, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot, spring elements -Manufacturer: Air Loc, machine feet (4 pieces) for machine tools and equipment -Type: GLV 110 -Installation height: 25 mm -Submission/Price: complete -Dimensions (each): 125/125/H25 mm -Weight 1.2 kg/piece

Air duct MWM 12307524 Original - Price per air duct! - Suitable for MWM TCG 2020 - TBD 620 - TBG 620 - AIR GUIDANCE CONDUITE D'AIR CONDUCTO DE AIRE The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new proj ...

Air duct MWM 12307522 Original - Price per air duct! - Suitable for MWM TCG 2020 - TBD 620 - TBG 620 - AIR GUIDANCE CONDUITE D'AIR CONDUCTO DE AIRE The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new proj ...

- Air guide housing air duct housing MWM 12141695 - Suitable for several motors - Please note! Price per piece! - 12141695 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapti ...

- Air guidance air duct MWM 12136627 - Suitable for several motors - Please note! Price per piece! - References -> 12131031 – 12136628 – 12306646 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new pro ...

- Air guidance air duct MWM 12131039 - Suitable for several motors - Please note! Price per piece! - References -> 12131070 – 12350043 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By cons ...

Immediately available used shop air duct for SBA 6/8/12/16 M816

Consisting of approximately 30 mtr air duct, duct Ø 180 mm, hangs at approximately 4 mtr height, including various diameters + lengths of flexible hose on the first floor (see last 4 photos)

Duct sensor for rel. Humidity/temp. 2 x 0...10 V -Type: QFM3160 for duct installation with mounting flange. -Technical specifications: -Measuring element temperature: active -Measuring element humidity: capacitive humidity sensor -Operating voltage: 24 VAC 13.5...35 VDC -Power consumption:

Duct sensor for rel. Humidity/temp. 2 x 0...10 V -Type: QFM2160 for duct installation with mounting flange. -Technical specifications: -Measuring element temperature: active -Measuring element humidity: capacitive humidity sensor -Operating voltage: 24 VAC 13.5...35 VDC -Power consumption:

RADAX high-pressure duct fan High-pressure duct fan with cylindrical pipe sleeve, flanges on both sides, directly driven. Cylindrical galvanized steel tube Sheet metal, with double-sided moulded Flange, hole pattern according to DIN 24155, recessed built guide wheel. Semi-axial impeller, eight spatially connected curved blades made of thermoplastic, Balancing quality G 6.3 according to VDI 2060 and DIN ISO 1940. Three-phase squirrel-cage motor by Voltage reduction speed controllable, Thermal contacts, closed design, maintenance-free, sealed, low-noise Ball bearings with long-term lubrication. Fan data (default) Seawater version. Also resistant to weak acids and alkalis. NEW!

Cable duct, cable tray, cable channel, cable route, cable profile, protective conduit, protective profile -Cable duct: 61 pieces -Dimensions: 3000 x 50 x 37 mm -Material: Steel, galvanized -Price: complete -Dimensions: 3000/820/H120 mm -Weight: 212 kg

Ventilation duct, ventilation flap, ventilation system, dust extraction, extraction system, ventilation ducts and fittings, canvas nozzle-flexible connection -Ventilation duct: elastic connection -Inside: Ø 455 mm -Flange: Ø 513 mm / bolt circle Ø 486 mm -Hose length: 145 mm -Weight: 3 kg

Ventilation duct, ventilation flap, ventilation system, dust extraction, extraction system, ventilation ducts and fittings, canvas nozzle-flexible connection -Ventilation duct: elastic connection -Inside: Ø 400 mm -Flange: Ø 463 mm / bolt circle Ø 438 mm -Hose length: 155 mm -Weight: 2,6 kg

Ventilation duct, ventilation flap, ventilation system, dust extraction, extraction system, ventilation ducts and fittings, canvas nozzle-flexible connection -Ventilation duct: elastic connection -Inside: Ø 250 mm -Flange: Ø 310 mm / bolt circle Ø 286 mm -Hose length: 155 mm -Number: 3x nozzles available -Price per piece -Weight: 1.5 kg / pc.

Injector, cyclone, distributor for filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings -Pipe connection: Ø 190 mm -Cone piece: Ø 465 mm -Material: Aluminum -Transport dimensions: 1100/580/H490 mm -Weight: 13 kg

Ventilation duct, ventilation flap, ventilation system, filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings, louver damper, pressure relief damper -Lucoma: Pressure relief valve DRK 370 x 405 mm -Dimensions: 370/405/165 mm -Weight: 5.3 kg

Ventilation duct, ventilation flap, ventilation system, filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings -Outer frame made of: galvanized sheet steel -Dimensions: 2510/1910/H205 mm -Weight: 120 kg

Angle for filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings -ALUDEC 112 Ø 180 x 10 MTR -Dimensions: 815/220/220 mm -Weight: 3.9 kg

Injector, cyclone, distributor for filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings -Pipe connection: Ø 190 mm -Cone piece: Ø 465 mm -Material: Aluminum -Transport dimensions: 493/465/H495 mm -Weight: 13 kg

Angle for filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings -ALUDEC 112 Ø 254 x 10 MTR -Dimensions: 815/270/270 mm -Weight: 5.3 kg

Angle for filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings -Connection: 460 x 400 mm -Material: sheet steel -Dimensions: 765/440/H630 mm -Weight: 12 kg

Ventilation duct, ventilation flap, ventilation system, filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings -Outer frame: 738 x 535 mm -Price: per piece -Number: 5 pieces -Dimensions: 738/535/H10 mm -Weight: 1.6 kg

Angle for filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings -Connection: 460 x 400 mm/405 x 305, Ø 250 mm -Material: sheet steel -Dimensions: 1255/440/500 mm -Weight: 30 kg

Ventilation duct, ventilation flap, ventilation system, filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings -Outer frame made of: galvanized sheet steel -Dimensions: 1575/1275/H175 mm -Weight: 50 kg

Angle for filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings -Connection: 565 x 310 mm -Connection: Ø 500 mm -Material: sheet steel -Dimensions: 870/650/H650 mm -Weight: 38 kg

Angles for filter systems, chip extraction, dust extraction, extraction systems, ventilation ducts and fittings -Connection: 550 x 450 mm -Connection: Ø 515 mm -Material: Steel sheet -Number: 2x angles available -Price: per piece -Dimensions: 900/600/H610 mm -Weight: 22 kg

Angles for filter systems, chip extraction, dust extraction, extraction systems, ventilation ducts and fittings -Connection: 550 x 450 mm -Connection: Ø 560 mm -Material: Steel sheet -Dimensions: 1600/660/H800 mm -Weight: 38 kg

Kanalventilator Absaugung - Duct Fan ZENNER VTZ 560/50/2-W (Absaugung - Extraction) Baujahr / Year 2001 - Serial-No. 64.031 Volumenstrom / volume flow 2.21 m3/s Totaldruckerhöhung / total increase of pressure 3880 Pa Dichte / density 1.2 kg/m3 Drehzahl / Speed 2920 min-1 Kupplungsleistung / required performance 14.4 kW Temperatur / temperature max. 80°C Zum absaugen von Holzspänen oder Papierresten For vacuuming wood chips or paper residue Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Kanalventilator Absaugung - Duct Fan Coral PAP HP20 (Absaugung - Extraction) Baujahr / Year 2003 HP 20 REVS 2800 HZ 50 VOLT 380 / 660 Zum Absaugen von Holzspänen oder Papierresten For vacuuming wood chips or paper residue Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Kanalventilator Absaugung - Duct Fan Coral PAP HP 7,5 (Absaugung - Extraction) Baujahr / Year 2003 HP 7,5 REVS 2800 HZ 50 VOLT 380 / 660 Zum Absaugen von Holzspänen oder Papierresten For vacuuming wood chips or paper residue Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Material: Galvanized Steel Sheet Auction-ID: A1-45447-41

Manufacturer: ESC Model: Continuous Dryer Perfecton S with UV Year of Manufacture: 2020 Technical Specifications Heating Chamber 80°C - Galvanized nozzle plate - Process fan: TRZ 250-3 - Indirect air intake from process room - Recirculated air volume: 3,400 m³/h at 510 Pa - RRH heating register: 18 kW at max. 80°C - Drive motor: 2.2 kW / B3 / 1,410 rpm / insulation class F - Length: 2,000 mm Cooling Chamber - Process fan: TRE 250-3 - Supply and exhaust air volume: 3,400 m³/h at 800 Pa - Stainless steel drip tray for process fan - Drive motor: 2.2 kW / B3 / 1,500 rpm / insulation class F - Without cooling register and refrigeration unit - Length: 2,000 mm Discharge Element - Steel drive roller with rubber coating - Mounting for belt drive - Length: 500 mm Construction Details - All hoods and cladding panels made of electrolytically galvanized steel sheet - Heating chamber h ...

Manufacturer: ESC Model: Continuous Dryer Perfecton S Year of Manufacture: 2021 Technical Specifications Heating Chamber 80°C - Galvanized nozzle plate - Process fan TRZ 250-3 - Indirect air intake from process room - Air circulation volume: 3,400 m³/h at 510 Pa - Electric heating register: 18 kW at max. 80°C - Drive motor: 2.2 kW / B3 / 1,410 rpm / ISO F - Length: 2,000 mm Cooling Chamber - Process fan TRE 250-3 - Supply and exhaust air volume: 3,400 m³/h at 800 Pa - Stainless steel drip tray for process fan - Drive motor: 2.2 kW / B3 / 1,500 rpm / ISO F - Without cooling register and chiller - Length: 2,000 mm Discharge Element - Rubber-coated steel drive roller - Mounting for belt drive - Length: 500 mm General Construction - All hoods and cladding panels made of electro-galvanized steel sheet - Heating chamber hoods are insulated DIMENSIONS - Belt width: 1,700 mm - B ...

Ventilation duct, ventilation flap, ventilation system, filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings, butterfly valve, gate valve, manual gate valve -Gate valve: manual gate valve for ventilation duct -Pipe diameter: 300/260 mm, see photos -Number: 2x barrier slide available -Price per piece -Total dimensions: 340/225/H500 mm -Weight: 12.7 kg

Ventilation duct, ventilation flap, ventilation system, dust extraction, extraction system, ventilation ducts and fittings, canvas nozzle-flexible connection -Ventilation duct: flange ring -Inside: Ø 257 mm -Flange: bolt circle Ø 285 x 6 mm -Number: 34x flange ring available -Price: per piece / minimum order 2 pieces -Dimensions: Ø 307 x 4 mm -Weight: 0.7 kg/piece

Ventilation duct, ventilation flap, ventilation system, filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings, butterfly valve, gate valve, manual gate valve, gate valve/chain gate valve -Shut-off valve: for ventilation duct extraction system -Pipe diameter: 100 mm, see photos -Number: 2x gate valves available -Price: per piece -Dimensions total: 270/160/H180 mm -Weight: 1.2 kg

Ventilation duct, ventilation flap, ventilation system, dust extraction, extraction system, ventilation ducts and fittings, canvas nozzle - flexible connection -Handover: in its current condition as inspected -Seal: damaged, see photos -Ventilation duct: Adapter with elastic connection -Opening: 925 x 855 mm / 750 x 750 mm -Height: 355 mm -Transport dimensions: 925/855/H355 mm -Weight: 18 kg