air duct used for sale

Description: 7.5 kW compressor Max pressure 10 bar Air dryer 0.475 kW Air tank 500 LT Working hours 2878.17 model: RLR 900 TF/500B, Approx. Onsite Dimension. (l x w x h): 1,900 x 900 x 1,700 mm, weight approx.: 331 kg

Job composition: -A-Stand Dimensions Width 2240 mm Depth 1000 mm Height 900 mm -B-This equipment is supported by a structure resting on this bench. Dimensions Width 2240 mm Depth 1000 mm Height 1200 mm Front panel 2 sets of 2 Plexiglas doors on hinges and guides This system allows separate access to each piece of equipment, providing greater protection for the operator. The depth of the bench allows items to be moved from one device to another. -C-Sheathing and connections

Description: Output: max. 3,150 m³/h Negative air pressure: max. 2,250 PA Voltage: 3 x 400 V Motor power: 3 kW Waste container volume: 72 l Compressed air consumption: 73 Nm³/h Suction nozzle: 1 x 160 mm / 1 x 200 mm Approx. Onsite Dimension. (l x w x h): 1,100 x 1,100 x 2,700 mm, weight approx.: 260 kg

Description: Powder painting line Input dimensions: 2100mm high x 1970 mm wide Side walls can be closed to work with a width of: 1500 mm , Vertical travel of the booth: 2130 mm max height. Automatic spray gun working area: 2850 mm max. , Extractors and conveyor belt Burners and gas valve need to be checked. Washing and degreasing area Automatic painting with 4 spray guns (2 on each side) Manual painting area, 2 stations Drying area 2007 Estimated year of manufacture This machine hasn´t worked more than two years. Estimated working hours 1000 Approx. Onsite Dimension. (l x w x h): 40,000 x 8,000 x 3,000 mm, weight approx.: 44,000 kg

Air duct MWM 12307524 Original - Price per air duct! - Suitable for MWM TCG 2020 - TBD 620 - TBG 620 - AIR GUIDANCE CONDUITE D'AIR CONDUCTO DE AIRE The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new proj ...

Air duct MWM 12307522 Original - Price per air duct! - Suitable for MWM TCG 2020 - TBD 620 - TBG 620 - AIR GUIDANCE CONDUITE D'AIR CONDUCTO DE AIRE The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new proj ...

- Air guide housing air duct housing MWM 12141695 - Suitable for several motors - Please note! Price per piece! - 12141695 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapti ...

- Air guidance air duct MWM 12136627 - Suitable for several motors - Please note! Price per piece! - References -> 12131031 – 12136628 – 12306646 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new pro ...

- Air guidance air duct MWM 12131039 - Suitable for several motors - Please note! Price per piece! - References -> 12131070 – 12350043 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By cons ...

Immediately available used shop air duct for SBA 6/8/12/16 M816

We sell a rectangular air duct lock shaper. In good shape. Length 6000.0 Width 1000.0 Height 1500.0 Weight 1000.0 Advanced information Working length 2500.0 Max thickness 1.0 Motor power 3.0

Hot air axial fan, axial duct fan ASTO, JULIUS SÖHNLE AH03 450 0,77 m3/s up to 600°C (engine thermal, insulated with cooling air from outside) Speed: 1375 rpm Motor : 0.25 kW 380 / 660 V Inner diameter: Ø 450 mm New ! Dimensions: 500 x 600 x 520 mm

Duct sensor for rel. Humidity/temp. 2 x 0...10 V -Type: QFM2160 for duct installation with mounting flange. -Technical specifications: -Measuring element temperature: active -Measuring element humidity: capacitive humidity sensor -Operating voltage: 24 VAC 13.5...35 VDC -Power consumption:

Duct sensor for rel. Humidity/temp. 2 x 0...10 V -Type: QFM3160 for duct installation with mounting flange. -Technical specifications: -Measuring element temperature: active -Measuring element humidity: capacitive humidity sensor -Operating voltage: 24 VAC 13.5...35 VDC -Power consumption:

Suction slot duct system for passenger cars and trucks, exhaust extraction duct unit Npnfl Complete system with suction duct, trolley, suction hose, suction blower. Length approx. 20m, 3 suction hoses Aspirator

RADAX high-pressure duct fan High-pressure duct fan with cylindrical pipe sleeve, flanges on both sides, directly driven. Cylindrical galvanized steel tube Sheet metal, with double-sided moulded Flange, hole pattern according to DIN 24155, recessed built guide wheel. Semi-axial impeller, eight spatially connected curved blades made of thermoplastic, Balancing quality G 6.3 according to VDI 2060 and DIN ISO 1940. Three-phase squirrel-cage motor by Voltage reduction speed controllable, Thermal contacts, closed design, maintenance-free, sealed, low-noise Ball bearings with long-term lubrication. Fan data (default) Seawater version. Also resistant to weak acids and alkalis. NEW!

Max. duct cross-section: 160x160mm, max. straightening/ crosscut: 0,8-1,5x1500mm, controls: SPS-FS, without decoiler.

Plastic duct black 100100 make Panduit 112 m packed at 8 m each ( 42 m ) incl. lid Shipping by forwarding agent possible, separate invoice Bought as seen Payment in advance when ready for dispatch

Centrifugal fan, centrifugal duct fan HELIOS RRK 200 Speed: 2395 rpm Motor : 115 W 230 V Inlet: Ø 200 mm Dimensions: 350 x 350 x 260 mm

Axial fan, axial duct fan VENTILATORENFABRIK BUCURESTI, IDV BUCURESTI VAS400-4 0,695 - 1,125 m3/s speed: 1400 rpm engine : 0.25 kW 220 / 380 V inner diameter: Ø 400 mm New ! Dimensions: 460 x 310 x 460 mm

axial fan, axial tube fan, with adjustable blades VEM, ILKA VAN 630 606-W TGL24818/01 2,83 - 4,25 m3/s 579 - 245 Pa impeller: Ø 620 mm inner diameter: Ø 630 mm motor: YMB 100 S 4 3,0 kW 1430 rpm 220 / 380 V New ! Dimensions: 680 x 680 x 470 mm

Axial fan, axial tube fan VEM, TURBOWERKE Meißen LANVR 315 TGL 0/63 0,31 - 0,53 m3/s 118 - 49 Pa impeller: Ø 310 mm inner diameter: Ø 315 mm motor: YMB 56 K 4 0,12 kW 1360 rpm 220 / 380 V New ! Dimensions: 370 x 370 x 290 mm

Axial fan, axial tube fan VEM, TURBOWERKE Meißen LANVR 250 TGL 0/63 0,0,31 - 0,49 m3/s 324 - 167 Pa impeller: Ø 245 mm inner diameter: Ø 250 mm motor: YMB 63 K 2 0,25 kW 2760 rpm 220 / 380 V New ! Explosion-proof ! Dimensions: 300 x 300 x 260 mm

Axial fan, axial tube fan VEM, TURBOWERKE Meißen LANVR 400 TGL 0/63 2280 - 3700 m3/h 21 - 10 kp/m² impeller: Ø 395 mm inner diameter: Ø 400 mm motor: YM 63 G 4 0,32 kW 1380 rpm 220 / 380 V New Dimensions: 450 x 450 x 300 mm

Axial fan, axial duct fan VEM, ILKA VAV140/50 0,04 m3/s 45 Pa impeller: Ø 140 mm Pipe inner diameter: Ø 146 mm motor: 0.025 kW 2000 rpm 220 V AC 50 Hz New ! Dimensions: 150 x 150 x 70 mm

Centrifugal fan, centrifugal duct fan RUCK RK125L max. 330 m3/h impeller: Ø 180 mm pipe diameter: Ø 120 mm motor: 0,,07 kW 230 V AC 50 Hz approx. 1.8 m connection cable New ! Dimensions: 270 x 220 x 250 mm

Duct fan, axial fan, axial tube fan, without impeller ! KERAMCHEMIE Type AX 58 shaft diameter: Ø 11 mm inner diameter: Ø 250 mm > Flange diameter: 305 mm installation length: 400 mm Material: plastic Motor: LOHER ENCW-063BH-02E 0.25 kW

Axial fan, axial tube fan, with adjustable blades VEM, TURBOWERKE Meißen LANN 630 TGL20-10/68 Volumetric flow: 16900 - 22700 m3/h Total pressure increase: 66 - 42 kp/m² Density: 1,2 kg/m3 Temperature range: -25 - 40 °C impeller: Ø 620 mm Inner diameter: Ø 630 mm Motor: YMR 112 M4 A 5.5 kW 1440 rpm 380 / 660 V 3AC IP44 New ! Dimensions: 680 x 680 x 540 mm

Centrifugal duct fan S & P VENT-400L impeller (aluminium): Ø 400 mm nominal diameter: 400 mm motor: 0.4 kW 1250 rpm 230 V 1AC IP44 as good as new ! Dimensions: 620 x 570 x 440 mm

Duct fan, RADAX high-pressure duct fan, two-speed ( star/triangle ) HELIOS VARD 400/2/2 TK Article: 06691 / 011 Inner diameter: Ø 400 mm Flange diameter: 475 mm installation length: 350 mm Motor: 3C112L2-ROH 2,4 / 4,4 kW 2280 / 2780 rpm 400 V 3AC 50 Hz IP55 New, with documents ! Dimensions: 560 x 475 x 545 mm

Axial fan, axial duct fan VEM, TURBOWERKE Meißen LANVR250 Volumetric flow: 508 - 778 m3/h Total pressure increase: 7 - 3 kp/m² Density: 1,,2 kg/m3 temperature: 20 °C impeller: Ø 240 mm inner diameter: Ø 250 mm installation length: 125 mm engine: YM 56 K4 0,12 kW 1360 rpm 220 / 380 V 3AC 50 Hz IP44 New ! Dimensions: 300 x 240 x 300 mm

Axial fan, axial tube fan, with adjustable blades VEM, TURBOWERKE Meißen LANN 630 Volumetric flow: 2.83 - 4.25 m3/sec Total pressure increase: 575 - 245 Pa Density: 1.2 kg/m3 Temperature: -25 - 40 °C impeller: Ø 620 mm Inner diameter: Ø 630 mm installation length: 315 mm Engine: YMB 100 L4 2,7 kW 1435 rpm 220 / 380 V 3AC 50 Hz IP44 New ! Dimensions: 685 x 685 x 500 mm

Axial fan, axial tube fan ZIEHL-ABEGG FC050-4DF.4F.3 98092313 Fan diameter: Ø 500 mm motor: 0.64 kW 1360 rpm 230 / 400 V 3AC 50 Hz IP54 installation length: 165 mm New ! Dimensions: 300 x 240 x 300 mm

axial fan, axial tube fan, with protective grille WOODS 56JM/20/2/3/14-24 3 S F2225 impeller diameter: Ø 550 mm wing: 3, angle adjustable inner diameter: Ø 560 mm installation length: 230 mm motor: 3,3,8 kW 2910 rpm 380 / 420 V 3AC 50 Hz IP55 used, checked! Dimensions ( with protective grille ): 660 x 660 x 560 mm

Duct probe for measuring relative humidity and temperature IMTECH LCN-FTK140VV 0000001045109 Temperature measuring range: -20 - +80 °C measuring range relative humidity: 0 - 100 % Duct installation depth: 140 mm sensor diameter: Ø 20 mm IP65 New ! Dimensions: 185 x 85 x 50 mm

Duct sensor, for relative humidity, duct humidity sensor THERMOKON FK270V Art. No.: 0000000099462 Measuring range: 0 - 100 % relative humidity Power supply: 15 - 24 V DC or 24 V AC Output voltage: 0 - 10 V DC Sensor length: 270 mm Sensor diameter: Ø 19 mm Flange diameter: Ø 55 mm used, tested ! Dimensions: 315 x 95 x 55 mm

Duct sensor for relative humidity and temperature, duct humidity sensor, duct temperature sensor, THERMOKON LCN-FTK400VV Art. No.: 0000000277525 Measuring range: 0 - 100 % relative humidity, -20 - +80 °C Temperature Power supply: 15 - 24 V DC or 24 V AC Output voltage: 0 - 10 V DC (humidity and temperature) Sensor length: 400 mm Sensor diameter: Ø 19 mm Flange diameter: Ø 55 mm used, tested ! Dimensions: 445 x 95 x 55 mm

Duct sensor, for relative humidity, duct humidity sensor THERMOKON FK390V Art. No.: 0000000099479 Measuring range: 0 - 100 % relative humidity Power supply: 15 - 24 V DC or 24 V AC Output voltage: 0 - 10 V DC Sensor length: 390 mm Sensor diameter: Ø 19 mm used, tested ! Dimensions: 435 x 95 x 55 mm

Duct sensor for relative humidity and temperature, duct humidity sensor, duct temperature sensor, THERMOKON LCN-FTK400VV Art. No.: 0000000277525 Measuring range: 0 - 100 % relative humidity, -20 - +80 °C Temperature Power supply: 15 - 24 V DC or 24 V AC Output voltage: 0 - 10 V DC (humidity and temperature) Sensor length: 400 mm Sensor diameter: Ø 19 mm New ! Dimensions: 445 x 95 x 55 mm

Duct sensor for relative humidity and temperature, duct humidity sensor, duct temperature sensor, THERMOKON FTK130VV Art. No.: 0000000095617 Measuring range: 0 - 100 % relative humidity, -20 - +80 °C Temperature Power supply: 15 - 24 V DC or 24 V AC Output voltage: 0 - 10 V DC (humidity and temperature) Sensor length: 130 mm Sensor diameter: Ø 19 mm Flange diameter: Ø 55 mm used, tested ! Dimensions: 175 x 95 x 55 mm

Duct temperature sensor, 2 pieces ABB TK-L240 Measuring range: -50 - +160 °C Duct installation depth: 240 mm Sensor diameter: Ø 7 mm Measuring resistor: PT1000 New ! Dimensions ( temperature sensor ): 280 x 50 x 84 mm Dimensions ( packaging ): 280 x 110 x 90 mm

Duct sensor for temperature, duct temperature sensor THERMOKON AKF1013507 Art. No.: 0000000022149 Measuring range: 0 - +160 °C Temperature Power supply: 15 - 24 V DC or 24 V AC Output voltage: 0 - 10 V DC Sensor length: 130 mm Sensor diameter: Ø 7 mm New ! Dimensions ( duct sensor ): 175 x 83 x 50 mm Dimensions ( packaging ): 245 x 95 x 55 mm

Channel Temperature Sensor, Temperature Sensor and Transmitter JOHNSON CONTROLS TS-9101-8252 Measuring range: -20 - +40 °C channel Mounting depth: 500 mm Sensor diameter: Ø 9 mm Output voltage: 0 - 10 V DC Supply voltage: 15 V DC New ! Dimensions ( temperature sensor ): 545 x 95 x 48 mm Dimensions ( packaging ): 570 x 110 x 60 mm

Stainless steel cable duct accessories ELECTRIX 2x cable duct connection bracket P19 - 75 2x duct end seals P18 100 x 75 1x funnel 80 x 150 mm to 80 x75 mm 4x cable holder PCR 100 1x 90° contra-angle handpiece 100 x 75 mm, Inner lid 1x 90° contra-angle handpiece 100 x 75 mm, outer lid Material: stainless steel, polished material thickness: 1.2 mm New ! Dimensions ( packaging ): 315 x 225 x 220 mm

Angle for filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings -Connection: 550 x 450 mm -Connection: Ø 560 mm -Material: sheet steel -Dimensions: 1600/660/H800 mm -Weight: 38 kg

Angle for filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings -Connection: 565 x 310 mm -Connection: Ø 500 mm -Material: sheet steel -Dimensions: 870/650/H650 mm -Weight: 38 kg

Angle for filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings -Connection: 550 x 450 mm -Connection: Ø 515 mm -Material: sheet steel -Number: 2x angles available -Price: per piece -Dimensions: 900/600/H610 mm -Weight: 22 kg

Injector, cyclone, distributor for filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings -Manufacturer: Schuko, ventilation duct distributor branch with butterfly valve -Pipe connection: 3x Ø 265 mm -Butterfly valve: manual adjustment -Transport dimensions: 1100/880/H430 mm -Weight: 44 kg

Ventilation duct, ventilation flap, ventilation system, filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings, butterfly valve, gate valve, manual gate valve -Gate valve: manual gate valve for ventilation duct -Pipe diameter: 300/260 mm, see photos -Number: 2x barrier slide available -Price per piece -Total dimensions: 340/225/H500 mm -Weight: 12.7 kg

Ventilation duct, ventilation flap, ventilation system, dust extraction, extraction system, ventilation ducts and fittings, canvas nozzle-flexible connection -Ventilation duct: elastic connection -Inside: Ø 455 mm -Flange: Ø 513 mm / bolt circle Ø 486 mm -Hose length: 145 mm -Weight: 3 kg