air duct used for sale

Manufacturer: Bush type: mink MI 1502 BP Motor: 18,5 KW; DS 400V status: used, without Warranty: 6 months Flow rate: 500 m ³/h discharge pressure: + 1,2 bar Accessories: additional intake filter (changed); Manual delivery time: approx. 1-2 where.; ready for operation

Technical data: -Operating temperature adjustable from 80 ° to 300 ° -Interior dimensions approx. B H 1000 x 1200 X 900 mm -mot. Small parts conveyor for feeding with small parts -Utility room 0.88 m³ -Total steam room 1.99 m ³ -Exhaust volume 85 m³/h -maximum amount of solvent 22 Gr. / per batch -Door opening B 1000 x H 1100 mm -Opening flap in the door approx. B 750 x H 270 mm -Power heater 24 kW -Power Fan 4.45 kW -Space requirement approx. B H 2000 x 2900 m. fan x T 1800 mm -Weight approx. 2000 kg -Control settings with or without timer min / hrs / day -Timer -controlled temperature preselection -Temperature display -Emergency - of - buttons

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Used Hosokawa Alpine Mikro Classifier CC22, from our former generation previous to our current technological evolution. This air classifier can operate off-line as a stand alone system or in-line as the perfect companion for a Hosokawa Alpine ACM 10 or ACM 15 impact classifier mill, to ensure no undesired fine dust particles are present in the final micronized product, usually in the ...

Warm air heating Spanex UL/E-50 RW-02 with chips 40 kW L x W x H: 1970 x 820 x 1570 cm Weight 530 kg Year 2012 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Cold regenerating adsorption dryer make SPX HANKISON type HHL 200Ser. -No: 347434-1204-2200 Year 2004minute / Max. Ambient temperature: +2 / + 45 °minute / Max. Inlet temperature: +2 / + 50 °Flow rate (based on + 20 ° compressed airsuction temperature and 1 bar absolute): 200 m³ / h.Pressure dew point at operating overpressure: -40 °minute / Max. Operating pressure: 5.0 / 16 barCompressed air connection: R 1Setting value Pressure switch Tank Pressure min.:0,91 bar ON: 0.7 bar OFFAdsorbent: activated aluminaContainer capacity: 93 lFilling weight per pressure vessel: 70 kgDimensions approx. W x D x H: 1150 x 750 x 1980 mmWeight approx: 310 kgWith- Level 1 controlused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our ...

Machine type: Dry air dryer for plastics Make: Somos R40 Color: Yellow Control type: 230V, 50Hz Dry air volume: 40m3/h Heating capacity Dry air: 4.5kW Heating capacity regeneration: 4.5kW Power: 0.4kW Total closing value: 4.9kW Additional information: recirculation cooler 1.8m2, max. temp. 130°C 3x1,1kW additional heating, 3x hand valve, incl. limit switch for air regulation - completely overhauled with 1 year warranty (except consumables) Location: Germany 3 x 25l GRP funnel on mobile frame Dimensions: 220x80x210 (=LxWxH in cm) Weight: 200kg

O WHOM IT MAY CONCERN ; WE VE ROTARY SCREW AIR COMPRESSOR TMC SA 40-8 EANA AT OUR STOCK PLS FIND DETAILS ON BELOW TYPE TMC SA 40-8 EANA COOLING AIR 2007 YOB CAPACITY 408m3/h MAX PRES 8bar MOTOR POWER 40kW ELC SUPPLY 440/60hZ WE VE ALSO MANY NEW GENUINE SPARE PARTS AT OUR STOCK IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US Capt. Ayhan Ugurluba Regards ; Aliaga Marine Services E mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 90 Mobile: +905556084850 aliagamarine.com TURKEY Capt. Ayhan Ugurluba

KRONES Air conveyors used- in very good condition Price: Euro 475,-- / per meter Complete with cable, stand, motor

2930-12-334-9601 / 0010985920 2930-12-F23-2495 / 8690980160

2930-12-334-9277 / 0052000675

2930-12-A07-0048 0030982820

2930-12-378-7717 5260981120

2930-12-378-7720 5260981220

Jenbacher Type 4 J412 Jenbacher Type 4 J416 Jenbacher Type 4 J420 Orginal Part Number 1202340

Siemens Gas Engine Guascor HGM 560 Siemens Gas Engine Guascor SFGLD 560 Orginal Part Number 7673532

General Electric Power Jenbacher Type 3 J312 General Electric Power Jenbacher Type 3 J316 General Electric Power Jenbacher Type 3 J320 Orginal Part Number 6141424 / 1212197 / 369829

MWM TCG 2020 V12-Nr. MWM TCG 2020 V16

Description Brand GUNTNER Model GHF 050/1E/17 ID 109454-16 Status Active Price 1.600 € + VAT Year of manufacture 2011 Location Oradea (RO) Cooling equipment | GUNTNER GHF 050/1E/17 manufactured in 2011. Size (L x W x H): 1000 x 500 x 500 mm. 2 pieces available, one missing a fan. Heat Exchanger Aligned or staggered tube pattern Special copper tubes for HFC, coolant and CO2 Stainless steel tubes for NH3 Surface-corrugated aluminium fins for high heat transfer Casing Corrosion-resistant aluminium alloy AlMg up to 500 mm fan diameter Powder-coated with RAL 9003 Hinged side cover with hinges Tray Hinged and thermally-decoupled (condensation free) Separate drip plate Corrosion-resistant aluminium alloy AlMg Powder-coated with RAL 9003 Large condensation drain with 45° incline Fans Proven quality fans Standard with two speeds (for fan diameter of 50 ...

Various pressure expansion vessels with solid steel gas filling, built in 2008, unused 2x Pneumatex Statico SU 500.6 Pressure expansion vessels (steel), year of construction: 2008, cylindrical, 500L, 6 bar, diameter: approx. 680 mm, total height with feet: approx. 1588 mm, permissible temperature range: -10°C-120°C 4x Pneumatex Statico SG 1000.6 Pressure expansion vessels (steel), year of construction: 2008, cylindrical, 1000L, 6 bar, diameter: approx. 850 mm, total height with feet: approx. 2189 mm, permissible temperature range: -10°C-120°C (unused) 3x Pneumatex Statico CG 3000.6 E Pressure expansion vessels (steel), year of construction: 2008, cylindrical, 3000L, 6 bar, diameter: 1,300 mm, total height with feet: approx. 2936 mm, permissible temperature range -10°C â 120°C (unused)

Suction system suitable for the offered plasma cutting system. Used but fully functional in good condition. Installation indoors and outdoors possible. With integrated start-up control. Receptacle with quick release. Technical data Power: 7.5 KW Air flow Demonstration possible.

MTU 8V396 TB 53 Heat Exchangers Charge Air Coolers Intercoolers 2930-12-334-9601 / 0010985920

MTU 8V396 TB 53 Heat Exchangers Charge Air Coolers Intercoolers 2930-12-334-9277 / 0052000675

MTU 12V396 SE 94 / TE 94 Exchangers Charge Air Coolers Intercoolers 2930-12-A07-0048 0030982820

MTU 16V4000 M 90 A BANK Heat Exchangers Charge Air Coolers Intercoolers 2930-12-378-7717 5260981120

MTU 16V4000 M 90 B BANK Heat Exchangers Charge Air Coolers Intercoolers 2930-12-378-7720 5260981120

JENBACHER TYPE 4 Heat Exchangers Charge Air Coolers Intercoolers J414 / J416 / J420 PNo:1202340

GUSCOR HGM560 / SFGLD560 Heat Exchangers Charge Air Coolers Intercoolers Part Number 7673532

JENBACHER TYPE 3 Heat Exchangers Charge Air Coolers Intercoolers 6141424 / 1212197 / 369829

MWM TCG 2020 V12/V16/V20 Heat Exchangers Charge Air Coolers Intercoolers Part Number 12452511

MTU 8V396 TB 53 2930-12-334-9601 / 0010985920

MTU 8V396 TB 53 2930-12-334-9277 / 0052000675

MTU 16V4000 M 90 A BANK 2930-12-378-7717 5260981120

The Junior 4.4 air cushion machine is a new, reliable, easy-to-use machine. This machine is designed to make air cushions made of "Bio Green" film in various dimensions to produce. The "Bio Green" films made of HDPE with DPA additives will be available in 12 – 24 months under Exposure to UV rays, moisture and bacteria degradable (ASTM D6954-04 certificate) and therefore very environmentally friendly. 1 table model Air-O-Pack Junior 4.4 Power: 8 – 15 m/min Setting options: adjustable chain length, temperature, speed, air volume Digital display and control unit Digital storage for air volume and temperature Fast film change Low noise max 60 dB Electrics 220/110 V, motor 120 W Warranty 6 months, excluding wearing parts Options at an extra cost Mobile chassis MS-01 € 270,-- mobile storage basket MB-02 € 270,-- Foot pedal € 60,-- Sensor control € 60,-- ...

MTU 16V4000 M 90 B BANK 2930-12-378-7720 5260981120

JENBACHER TYPE 4 J414 / J416 / J420 PNo: 1202340

GUSCOR HGM560 / SFGLD560 Part Number 7673532

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Used Hosokawa Alpine Turboplex ATP 200 air classifier for the perfect end product particle design. Our air classifiers allow you to split the product into two fractions, a fine and a coarse one, when a regular sieve can´t achieve this task due to product fineness or other characteristics. This is handy when you need to dedust the product removing the undesired fine dust or ensure a  ...

Gas injection technology Bauer – 11 pcs. 2001 – 2007 year prod. Price - 1.500 Euro/pcs.

Unused solenoid valve for air intake from stock MWM 12072648

From stock Solenoid valve for air intake Hekomatic 12072648 MWM 12072648

Kaeser TE 121 used machine volume flow: 12,7 m3/min pressure: 13 bar 1997 year

Mark used machine volume flow: 18 m3/min pressure: 13 bar 2014 year

White SC/KWT 1000 - Test chamber volume 1000l - Test chamber dimensions height with hood: 1190mm - without hood: 740mm - Width: 1560mm - Depth: 570mm Outer dimensions: height: 1370mm, width: 920mm, depth: 800mm Brine tank: 180l Temperature range: - Salt spray test: 5K above ambient temperature up to +50°C - Condensation water test: 5K above ambient temperature up to +45°C Humidity range at SC/KWT : Room humidity/saturation Air flow rate with salt spray test 2m³/h Air flow rate for standard climates: 7m³/h Compressed air min.4bar/ max 10bar Connection 1/4 inch Connection 208-240V 2.6kV 220kg Standard Type series SC Options Type Series SC and SC/KWT Ventilation device for DIN 50 014, paragraph 5 Room tem pe - ratur (standard on SC/KWT) Desalination plant Compressed air unit Precipitation collectors Precipitation recording and display Measurin ...

Residual item material from inventory sale for solar free-surface plant Screws, nuts, cable clips, washers, mid and end terminal profiles Package price

Rubber Air Spring, Vibratory mounts, Machine Feet, Machine Legs, Antivibratory feet, Leveling Feet, Heavy Duty Feet Load (Kg/pc): 1200 - 3400 Max. Pressure Bar: 6 Dimensions: S: 370mm D: 360mm H App: 111mm d: 200mm h: 8mm Bolt: M20 Four pieces on stock. Similar models that we can produce: TL1: Load (Kg/pc): 25 - 60 Max. Pressure Bar: 3 TL2: 80 - 300 Load (Kg/pc): Max. Pressure Bar: TL3: Load (Kg/pc): 270 - 800 Max. Pressure Bar: 5 TL4: Load (Kg/pc): 650 - 1500 Max. Pressure Bar: 6 TL6: Load (Kg/pc): 3000 - 6500 Max. Pressure Bar: 6 It can fit to Bruderer, Mabu, Schaal, Schuler, Haulich and other machines. For any questions please contact us.

Make: WEGER Type: AL 96 Built: 1999 Power: 6700 m3/h Current consumption: 7.65 A 2 pieces Available Price on request Contact details can be found under Contact

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Lightly used Hosokawa Alpine Ventoplex C32V air classifier in very good conditions. Recirculation classifier perfect for fine classification of abrasive products separating a fine fraction from the coarser one to ensure a perfect top cut of the product or dedust it getting rid of undesired ultrafines. It is suited for high yields with low energy consumption. Our classifiers obtain t ...

Evaporator KUBA Type: SGBE 141 Cowl power: 29.2 kW at DT8 Lamel distance: 7 mm With electric heating Number of fans: 1 x 710 mm Dimensions: 1600 x 1300 x 1400 mm Cold agent: Freon Volume: 44 ltr Number of pieces in stock: 5 Reference number: CH149 Condition: Used in good condition Price on request, We have many other refrigeration systems : Bitzer,Copeland,Frascold,Lunite,Kueba,Guentner,Eco,Alfa-Laval,Goedhart ,Helpman

SOMOS Dry Air DryEr TF40 with integrated material conveying + MC1 control for plastic granules Overhauled: January 2020 Colour: Tuerkis Dry air quantity: 40m3/h Heating capacity dry air: 4.5 kW Drive power: 0.5 kW Total closing value: 5.0 kW Dimensions dryer + hopper: 95x66x230 (LxWxH in cm) - with reduction of support Weight Dryer: 165kg Additional: - 100l GRP drying hopper insulated on an integrated frame - Lid for separators available - Incl. dried material conveying automatically to the machine - hopper filling according to customer requirements; with conveyor or hand-filled Completely overhauled in 2019 with 1 year warranty, except wear parts Location: Germany Total dimensions: 110x512x220 (LxWxH in cm) without conveyor pipe removal Weight: 100kg Funnel filling and spare parts package up ...

Equipment / Additional information: 200-240V 50/60Hz