127,903 used machines on RESALE, but how to find them? Machine Search
Pneumatic Hydraulic Pump, Pneumatic Hydraulic Pump SCHMIDT, KRANZ & CO GMBH MAXIMATOR MO 33-01 ( MO33-01 ) Operating pressure: 320 bar Air propulsion pressure: max 11 bar used, tested ! Dimensions: 230 x 105 x 85 mm
Heating element, air heater - without housing VOLTA ERR 7,000 W 12 Heating rods 380 V Dimensions: 560 x 250 x 145 mm
Hot Air Axial Fan, Axial Tubular Fan ASTO, JULIUS SÖHNLE AH03 450 0.77 m3/s up to 600°C (motor thermal, insulated with cooling air from outside) speed: 1375 rpm motor : 0.25 kW 380 / 660 V Inner diameter: Ø 450 mm New ! Dimensions: 500 x 600 x 520 mm
Without pallet truck Auction-ID: A1-45682-54
Screw compressor with dryer. Pressure vessel capacity: 750 liters. Capacity: 3.09 m?/min. Max. pressure: 10 bar. Motor 22 kW.
Pressure vessel compressed air max 16 bar With pressure relief valve Standing model Content: 1000 litres
Air Heat Exchanger, Control Cabinet Fan EBM R2E180-AT38-10 2 x 85 W 220 V Dimensions: 1820 x 480 x 120 mm
Volume: 2000l Gas: air Max pressure: 10.7 bar Max temp: -15/55?C
Auction-ID: A3-43515-21059
Air Heat Exchanger, Control Cabinet Fan RITTAL Techline SK3129 2 x 82 W 230 V Small piece of fan cover broken off ! used, tested ! Dimensions: 780 x 300 x 120 mm
Hot Air Blower LEISTER Hotwind S ( HotwindS ) Type 9C1.2.2 102.586 2.3 kW 230 V AC max. 400 °C used, tested ! Dimensions: 430 x 220 x 150 mm
Pneumatic nailer, strip magazine nailer PASLODE GN 161 ( GN161 ) for nails up to 160 mm Pmax 8 bar suitable nails W125 ! used ! Dimensions: 540 x 520 x 140 mm
Spring balancer with compressed air hose DESOUTTER 3HU 6.3 bar load capacity: 0.5 - 1.4 kg extension: 1,300 mm used, tested ! Dimensions: 200 x 200 x 150 mm
Axial Dry Cooler, Güntner GFH090.2A/2x3-M(S) Manufacturer: Güntner. Medium: Water Glycol 70/30% Medium temperature: Inlet 90º C. Outlet 70º C. Cooling Capacity: 800kW Air temperature: 35º C. Fans: 6 pieces, 1.5kW, 400V, 50Hz, 3 conductors Connection: Inlet 1x DN80, Outlet 1x DN80 Dimensions: LxWxH = 6,200x22921x1460mm Weight: 1358kg Sound pressure level: 53 dB(A) 10m distance, Year of Make: 2016 Condition: Good, leakage and fans tested Jenbacher, Dry cooler, Dry air cooler, Emergency cooler, drycooler, Glycol cooling water
Axial Dry Cooler, Güntner GFH090.2A/2x3-M(S) Manufacturer: Güntner. Medium: Water Glycol 70/30% Medium temperature: Inlet 90º C. Outlet 70º C. Cooling Capacity: 800kW Air temperature: 35º C. Fans: 6 pieces, 1.5kW, 400V, 50Hz, 3 conductors Connection: Inlet 1x DN80, Outlet 1x DN80 Dimensions: LxWxH = 6,200x22921x1460mm Weight: 1358kg Sound pressure level: 53 dB(A) 10m distance, Year of Make: 2016 Condition: Good, leakage and fans tested Jenbacher, Dry cooler, Dry air cooler, Emergency cooler, drycooler, Glycol cooling water
Turbo Tech Centrifugal Air Compressor Model: Til-4800 Compressor Stage: 3 Flow Rate: 80 m3/min Coupling Power: 374 kW Electric Power: 415V/50Hz/3Ph, IP23 Motor IE Standard: IE3 Motor type: ODP Inlet condition: 1.013barA, 35°C, Humidity 80% Main Motor Manufacturer: SIEMENS Motor Starter: Inverter Starter with Synchronous Bypass Service factor: 1.0 Air and Oil Cooling pipe material: Copper-Nickel For any inquiries, please contact: 1. email: zulaika.kamarudinn@gmail / rozitah@topglove.com.my 2. Contact Number: i. Ms. Zulaika: 012-9037331 ii. Ms. Rozitah: 018-2814801
Air classifier - Integra HWS-1000 KL (unused) This item is as new, as it was never in use. For sale: - Air classifier POWER HWS-1000 KL - Hook lift - system DIN 30722 - Conveyor belt special construction, foldable with stock winch - AA: 2750 mm, GB: 650 mm, steep conveyor belt with 30 mm V-profile incl. magnetic drum and VA chute - Power generator 100 KVA, Stage 3, 280 liter tank Condition: NEW The wind sifter was not in operation. Only the power generator has a running time of 2.566 hours The 2020 Integra HWS-1000 KL is an industrial air classifier machine primarily used for sorting and separating materials based on air flow dynamics. It is often employed in recycling processes or material handling where specific separation is required. The machine features a hook lift system compliant with DIN 30722 standards and includes a specially designed conveyor belt with a steep angle ...
modular compressed air maintenance unit PARKER Maintenance unit with filter, pressure regulator, stopcock Filter with pressure regulator P3KEA14ESABNGP Stopcock P3KVA14LN Oiler can be filled under pressure P3KLA14LSMN Inlet pressure up to 17 bar Control pressure 8 bar Connection 1/2" Wall bracket
modular compressed air maintenance unit PARKER Maintenance unit with filter, pressure regulator, stopcock Filter with pressure regulator P3KEA14ESABNGP Stopcock P3KVA14LN Inlet pressure up to 17 bar Control pressure 8 bar Connection 1/2" Wall bracket
Atlas Copco ZT30 Air compressor Serial: AIF065086 2000, oil free air cooled screw compressor, operating pressure 8.6Bar, compressor output 69 l/s, motor 30Kw, comes with Ultrafilter International dryer model: HLALD0225 and Abbott air tank
Height 1750 mm Width 1260 mm Length 2380 mm Power supply: 400V 50Hz 3N Description The machine is adapted to transport shredded dry industrial materials.
available is a complete Plant with Equipment to produce Airspring! 3 Roll Calender with line and 84" Twin Mill Bias Cutter Several Building machine several hydraulic Curing presses testing machine 3 x assembly lines Winder ...
Key data: 75 , 13 , 15
Screw compressor, 500 V drive, was serviced by Atlas Copco in 2020 and has been out of service since then. Accessories (absorption dryer, refrigeration dryer, oil/condensate separator) available for an extra charge.
Key data: 73 , 3
Screw compressor, 500 V drive, serviced
- Year: 2007 - Engine: 15 hp (11 kW) - Maximum pressure: 7.3 bar
10 sets Picanol Air-Jet Weaving Looms, type OmniPlus – 190-4R YOC 2001, working width 190 cm, 4 weft colors Stäubli electron. dobby 2871 – 16 shafts installed, Sumo motor, electron. take-up and warp let-off, max warp beam flange dia. 1,000 mm, Off-Loom Take-up, Double Whip Roller
YOC 2001, working width 220 cm, 4 weft colors Stäubli electron. dobby 2871 – 16 shafts installed, Sumo motor, electron. take-up and warp let-off, max warp beam flange dia. 1,000 mm, off-loom take-up
02 sets Picanol Air-Jet Weaving Looms, type OmniPlus Summum – 250-4R YOC 2015, working width 250 cm, 4 weft colors Stäubli electron. dobby 3220 / C4Can – 16 shafts installed, Sumo motor, electron. take-up and warp let-off, double whip rollers, max warp beam flange dia. 1,000 mm, off-loom take-up
VA-12. Compressed Air Systems (Air Reservoir) 2 complete systems, functional, Built: 1991 Manufacturer: Otto Boge GmbH & CO.KG Each unit contains: - 1 BOGE compressor tank - Diameter: 1.20m - Length: 2.20m - Mass: 1.5 t - Volume: 2000 l - Pressure: 16 bar Each unit includes: - 1 compressor, Type K-TROCHL-KOMPR - Manufacturer: Kompressor HD Technik GmbH Mülheim/Ruhr - 1 motor Technical Data: - Intake capacity: 5-50 m³/h - Intake pressure: 1.03-1.35 bar - Temperature range: 5-30 °C - Motor type: SCHORCH K 3200 L - Model: B 1014-2, 24 kW, 400V Find more here - / Contact us at -
2. Other and Auxiliary Systems - SNA SNA-08. Air Technology System, 2 units Type Wolf KG 250, functional, Built: 1991 Manufacturer: Wolf Anlagen Technik GmbH Technical Data: 20250 m³/h; 10 kW; 1500 rpm; 1050 Pa Motors: 71M01 LOHER DNGW 160LB 04A; 5 kW; 380V; 1500 rpm; 50Hz, Built: 1991 71M02 LOHER DNGW 160VB 040; 5 kW; 380V; 1500 rpm; 50Hz, Built: 1991 Find more here - / Contact us at -
TO WHOM IT MAY CONCERN ; WE VE 1 PC REBUILT AIR STARTER INGERSOLL RAND ST 499 IC 03L AT STOCK. ( EX STOCK ) PLS FIND DETAILS ON BELOW TYPE ST 499IC03L SERIAL NO. SP110221056 MAX INLET PRESSURE 90 PSIG MADE IN USA IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US With Kind Regards ; Aliaga Marine Services E mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 85 Mobile: +905556084850 abc.aliagamarine.com TURKEY
Guiding machine / measuring machine Year of construction 2025 7.5 kW Filter area 32m^2 Intake manifold: 300 Dimension: LxWxH: 3,650x1,540x2,570
Diameter of process lines/regeneration drain lines/compressed air lines: 50mm/50mm/8mm, max. inlet temperature: 34°C, max. hardness: 10/20°Fr, min./max. operating pressure: 2bar/8bar, min. degree of filtration: 5µm, max. glycol content: 25%, dry air capacity: 50m³-150m³/h, dew point: below 50°C, max. process temperature: 200°C, max. tank volume: 30dm³-200dm³, max. Glycol content: 25%, dry air capacity: 50m³-150m³/h, dew point: below 50°C, max. process temperature: 200°C, tank volume: 30dm³-200dm³, max. compressed air consumption: 300l-500l/h, machine dimensions X/Y/Z: approx. 800mm/650mm/1100mm, weight: approx. 150kg. Documentation available. On-site inspection is possible.
A Wolf air conditioning and ventilation system, consisting of a supply air unit, an extract air unit and a heater, is available. 1) Wolf WK-101 supply air unit, nominal volume flow: 8500m³/h or 2.36m³/s, total/exact delivery pressure: 675Pa/250Pa, fan efficiency: 75.3%, fan speed: 2131rpm, fan power: 2.4kW, differential pressure: 1861Pa, motor power: 3kW, motor speed: 1420rpm. 2) Wolf WK-101 exhaust air unit, nominal volume flow: 8500m³/h or 2.36m³/s, number of filters: 4, filter class: F5, filter type: Biost. Pocket filter TK F5 PVC, initial pressure difference: 69Pa, final pressure difference: 200Pa. 3) Wolf WK-101 heater, nominal volume flow: 8500m³/h or 2.36m³/s, nominal heat output: 51.4kW, air inlet and air outlet temperature: -14°C/4°C, heating medium: water-glycol, flow temperature: 12.8°C, return temperature: 0.7°C, medium flow rate: 4240l/h, glycol content: 30%, max. ...
Volume: 250l, max. operating pressure: 11bar, outer diameter: 450mm, stand height: 1800mm, medium temperature min./max.: -10°C/120°C. Documentation available. On-site inspection is possible. The machine is unused and as good as new.
Two compressed air tanks are available. 1) Karl Kremsmüller u. Co., year of construction: 1980, operating pressure: 7bar, test pressure: 9.1bar, operating temperature: 20°C, medium: compressed air, capacity: 5300l. 2) Engelbert Dax, year of manufacture: 1973, capacity: 15000l, operating pressure: 4ATÜ, test pressure: 5.2ATÜ. On-site inspection is possible.
One air shower is available. Two identical air showers with glass inlet and outlet doors and one air shower with glass inlet door and fire protection outlet door (fire protection door). Insulation class: 54, motor power: 40kW, machine dimensions X/Y/Z: approx. 1100mm/1100mm/2950mm. On-site inspection is possible.
Output: 25-49 cycles/min, film material: PA/PE composite film or polyethylene film, cushion length range: 40mm-160mm, film width range: 420mm/767mm, max. roll diameter: 280mm, machine dimensions X/Y/Z: approx. 1600mm/800mm/1300mm, weight: approx. 230kg. Documentation available. On-site inspection is possible.
maximum number of results exceeded
please refine your search
7.000 € 
