We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
120,294 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Case erector OMA hot melt – mod. AC 1000 HM Year: 2016 Speed: 2.000 cases/hour Machine suitable for american cartons Gluer Nordson Control panel with PLC and touch screen Safety protections CE
used
Box forming machine MONDO&SCAGLIONE Model: 376/c. Year: 1996. Speed: 23 cycle/minute. Gluer NORDSON. Type of clousre: glue. Manual available. Safety protections.
used
Box forming machine EUROTEMA - FC-2000HM Year: 1997. Speed: 2.000 cartoni/ora. Model: FC-2000HM. Type of box: American. Closure system hot-melt. Safety protections.
used
Feed boxes Bortolin Model: Feed boxes Year: 2004 Speed: 15.000 b/h Safety protection
used
Box forming machine – KETTENER Year: 1997 Speed: 12.000 bph Model: KAF 2000 R Safety protections.
used
Box forming machine SIAT – 150 C/H Year: 2015 Speed: 10 C/minute Closing box with adhesive taps. Safety protections.
used
Box forming machine BORTOLIN – FOC 23/30 Year: 2000. Speed: 8.000 bph. Model: FOC 23/30. Gluer NORDSON. Safety protections.
used
Box forming machine MONDO&SCAGLIONE | 378/C Year: 2005 Speed: 1.500 boxes/h Model: 378/C Formation of the horizontal carton Gluer NORDSON Safety protections
used
Box forming machine BORTOLIN-KEMO Year: 2006 Speed: 7.000 bph Model: Formatrice cartoni Gluer Safety protections
used
Box forming machine OMA | 40 HM Year: 2009 Speed: 6.000 bph Gluer Safety protections
used
Welding edge former, edge former, edge chamfering machine TRUMPF chamfers of steel plates for weld seam preparation type TKF 103 Sheet thickness: 4 - 25 mm Bevel length max: 10mm Bevel angle: 30 Power: 2000 Watt Mains connection: 220 Volt, 50 Hz - equipped with guide bracket for 30 bevel angles - regrindable butt steel for high tool utilization - several impact steels - Support plates 6, 8, 10, 12, 14, 16, 18, 20, 22 mm for different material thicknesses For bevelling straight and curved edges with at least 40 mm radius. For bevelling edges on flat and curved workpieces as well as tubes with an inner diameter of at least 80 mm. Weight: 14 kg; used
used
LPG forklift, gas forklift STILL type RX 70-16T Series No. 517314G00021 Year of construction 2016 Nominal load capacity 1600 kg Lifting height 4920 mm Fork length 1000 mm Fork carrier width 980 mm Construction height 2160 mm Total width 1100 mm Total length without forks 2200 mm Net weight 3040 kg - Triplex mast with full free stroke 1550 mm - hydraulic side shifter - LPG electric drive - 4-cylinder Volkswagen LPG engine with 30 kW - hydraulic auxiliary steering - front work light- reversing - warning light (blue) - rear hazard warning lights (yellow) - 4-wheel super elastic, solid rubber - front tires 18X7-8 SE / rear 18X7-8 SE - according to operating hours counter 22663 operating hours - New TÜV-UVV test good condition; used
used
Diesel - Forklift, compact stacker MORA type M80CS Fabr. No. 20087 Year of construction 2006 Nominal load capacity 8 ton. Lifting height 3800 mm Fork length 1800 mm Fork carrier width 1460 mm Construction height 3030 mm Total width 1460 mm Total length without forks 3350 mm Net weight 12740 kg- Duplex mast with 1950 mm Free stroke - 4 cylinders PERKINS diesel engine - completely enclosed cab with heating - electrohydraulic tilting device for the cab - hydraulic auxiliary steering - 2 work lights front, 1 piece work light rear - yellow warning - flashing light on the canopy - solid rubber tires (front 28 x 10 x 22) (rear 250/70 - 16) - 9646 operating hours read - UVV-TÜV approval New good condition rental on request; used
used
The Güntner air cooler with model number GVVX 071.1B/3-MD.E and fan model VT01343U is a high-quality air cooling system designed for various industrial and commercial applications. It has a maximum temperature of 50 degrees Celsius and a minimum temperature of 30 degrees Celsius, making it suitable for use in a wide range of environments. This air cooler was manufactured in 2014 and features a sturdy construction that ensures its durability and reliability. It is made of high-quality materials and is designed to withstand harsh environmental conditions, making it ideal for use in demanding industrial environments. The GVVX 071.1B/3-MD.E air cooler is equipped with the VT01343U fan model, a powerful fan that ensures efficient airflow for optimal cooling performance. The fan is designed to operate quietly and has low power consumption, making it an energy-efficient choice for coolin ...
used
Air Compressor Atelier Francois CE24A, 510 Nm3/h at 40 bar This three-stage intercooled high pressure compressor was manufactured in year 2008 and the operation was stopped in year 2019 and it was afterwards professionally dismantled. This compressor is very slow speed and it has only two cross-head assemblies, two connecting rods and associated bearings. There is no piston rod packing on 3rd stage, which eliminate sealing against 40 bar. Single acting 2nd and 3rd stage, requiring few valves. Smaller 2nd and 3rd stages are horizontal position to optimize the piston ring life. The delivery includes • AF CE24A high pressure air compressor with electric drive mounted on common base frame • Air-cooled stainless steel 40 bar air dyer with integrated 1-micron filter, dew point alarm and Bekomat drain system, made by Hankison • Horizontal 300 litre hot galvanized 40 bar air re ...
used
Air Compressor Atelier Francois CE68 A, 40 bar with Dryer and Air tank Two air compressors, both type CE68A. made by Atelier Francois, Belgium in 2001 and 2000, capacity FAD is 35 Nm3 /min. with discharge pressure of 40 bars. The delivery includes the skid mounted 3–stage intercooled oil-free piston compressor and 1.000 litre galvanized 40 bar pressured air tank, separately installed stainless steel air dryer with integrated 1 micron air filter and radiator cooler. Air dryer has refrigerant cooled stainless steel plate heat exchanger which condensates the moisture from air. Both compressors are installed and in operation till end of 2023. Compressor Manufacturer: Atelier Francois, Belgium Model: CE68A Serial no: 20G200 Manufacturing year: 2000 and 2001 Capacity FAD: 2100 m³/h at 40 bar Operation hours: 37000 and 27000 (still running) Speed: 480 rpm Electric motor: ...
used
SOMOS Dry-air-dryer R70 with 3 x hopper 200l, GFK with front door with sight glass, 2 x heating, automatic air Regulation, return air cooler, mobile. microprocessor control Dry air flow rate: 70 m3/h Heating capacity dry air: 6 kW Heating capacity Regeneration: 6 kW Drive capacity: 0,6 kW Connected wattage: 6,6 kW Completely overhauled with 1 year guarantee Vacuum conveying System and spare parts package can be offered on demand.
used
Compressed air screw compressor, Atlas Copco, GR 1520 200 kW, 20 bar, 19.60 m3/min. including external air cooler
used
Rotary screw air compressor Atlas Copco 200 kw, 20 bar, 19,60 m3/min. inclusive external air cooler
used
200 kW, max. 10 bar, 32,7 m3/min.
used
110 kW, max. 8 bar, 15,5 m3/min.
used
132 kW, max. 7,5 bar, 22,74 m3/min.
used
110,0 kW, 7,50 bar, 21,90 m3/min
used
75,0 kW, 7,5 bar, 11,30 m3/min
used
Compressed air screw compressor, 75.00 kW, 3x GA 808 and 1x GA 810
used
Stock number U1984-2 Used impact dryer for pellet by RIETER (Germany) model AERO 500 in stainless steel design (material 1.4541, AISI 321). Dryer is equipped with air blower providing 90 m3/min and driven by electric motor with power 18.5 kW. Dryer has reported output 4000 kg/h of outgoing product. Flow rate of water with pellet: 35 m3/h (maximal), 25 m3/h (nominal) and 20 m3/h (minimal). Nowadays machine has installed screens with mesh 1.2 mm. Machine new 1997. Shipping dimensions of dryer: width 1400 mm x length 3830 mm x height 2265 mm. Weight of machine – 700 kg. Body of drying chamber is sound-muffled. Technical documentation included in german language. Machine had been working on PP pellet.
used
132 kW, max. 7,5 bar, 24,2 m3/min, New srew.
used
160 kW, max. 7,5 bar, 27,4 m3/min, year 1998.
used
Max. 12 bar, 110 m3/min, year 2001.
used
132 kW, max. 11 bar, 20,3 m3/min. Air end new in 2001 and has 38000 working hours.
used
75 kW, max. 10.0 bar, 10.35 m3/min.
used
55,0 kW, max. 10 bar, 7,4 m3/min, YOM 1991
used
500 kW, max. 7,5 bar, 83,1 m3/min, oilfree, in very good condition, with matching dryer Atlas Copco MD 1800.
used
200,0 kW, max. 10,00 bar, 30,00 m3/min. Oil-free, water cooled. Excellent condition.
used
315.0 kW, max. 8.0 bar, 46.44 m3/min.
used
200.0 kW, max. 7.5 bar, 36.18 m3/min. condition as new. 2 stubble available.
used
200,0 kW, max. 7,5 bar, 36,18 m3/min. Condition like new. 2 pieces available.
used
90.0 kW, max. 8.0 bar, 15.12 m3/min. With built-in compressed air dryer Kaeltemittel R 404a. Oil, oil filter, air filter and oelab scheider are new.
used
90,0 kW, max. 8,0 bar, 15,12 m3/min. With built-in compressed-air dryer refrigerant R 404a. Oil, oil filter, air filter and oil separator are new.
used
11.80 kW, max. 10.5 bar, 56.50 m3/min.
used
Air Screw Compressor Atlas Copco GR 200 200 kW, 20 bar, 21.66 m3/min. New Elektronikon control at 20000 total hours. Actual operating hours 21409
used
Rotary screw air compressor Atlas Copco 200 kW, max. 20 bar, 21,66 m3/min. New elektronikon controller at 20000 total hours. Real working hours 21409
used
14.5 bar, 22.80 m3/min, refrigerant R 404a.
used
14.5 bar, 43.50 m3/min, refrigerant R 404a.
used
max. 14,5 bar, 43,50 m3/min, Refrigerant R 404a.
used
132,0 kW, max. 8,50 bar, 23,81 m3/min.
used
200,0 kW, max. 9,0 bar, 32,60 m3/min. Motor: 400V/50Hz, 460V/60Hz.
used
110.0 kW, max. 8.5 bar, 18.72 m3/min.
used
110,0 kW, max. 8,5 bar, 18,72 m3/min.
used
75 kW, max. 10,0 bar, 10,35 m3/min.