127,270 used machines on RESALE, but how to find them? Machine Search
Extra options : Fully enclosed cab , All-round LED lighting , Blue spot , beacon Auction-ID: A1-43890-17
Equipped with radio, disabled steering, electric windows, Auction-ID: A1-42015-180
Extra options : LED lighting front and rear , blue spot , Non-marking tires , beacon , fall protection Auction-ID: A1-43890-8
Extra options: Recently built type, All-round LED lighting, cabin, Engine runs beautifully, Daytime running lights, Blue spot, Heating, Air conditioning, 3-5 functions, Flashing light, incl gas tank, joy stick Auction-ID: A1-43890-14
Extra options : All around LED lighting , Blue spot , Joystick , Electric handbrake , Non-marking tires Auction-ID: A1-43890-71
Extra options : Fully closed cab , LED lighting all around , Blue spot , fingertip control , beacon Auction-ID: A1-43890-6
Extra options : Led lighting , Blue spot , joy stick , electric handbrake , Auction-ID: A1-43890-16
Turning radius: 2.277 m, Travel speed with/without load: 18/19 km/h, Maximum gradeability: 26 %, Engine manufacturer: Mazda, Engine type: M 4-20 G, Engine power: 33 kW (no registration number) Auction-ID: A1-40136-305
Extra options: LED lighting front and rear, Blue spot, Spoon adjuster, electric handbrake, Auction-ID: A1-43890-5
Equipped with: 220v battery charger, triple mast, 3 wheels, free lift Auction-ID: A1-40136-255
Forks 1400mm, spoon board with welding pull 1100mm, triplex mast, free lift, side shift, towing eye with pin 25mm, work lighting, max lifting height 4500mm, max lifting capacity 2000kg Auction-ID: A1-40136-82
Air conditioner, ABS, ASR, reversing camera, MP3,tire size for axle 1: 215/65 R16C, tire size for axle 2: 215/65 R16C; length: 5.98 m, width 2.06m, height 2.55m; The copy of registration documents is attached. Auction-ID: A1-45911-17
Engine problem (see video) - bodywork looks neat, interior signs of wear (see photos) - sold without contents in cargo space Auction-ID: A3-43369-10626
Extra options : Battery 2022 , Blue spot , Electric handbrake , Rotating beacon , Joystick , Front lighting Auction-ID: A1-43890-33
Extra options: LED lighting front and rear, electric handbrake, joy stick Auction-ID: A1-43890-31
Equipped with safety grille Pin diameter: 50 mm Inner suspension dimensions: 975 mm Working width: 4,230 mm Hydraulically folding side panels: approx. 800 mm per side Auction-ID: A1-40136-288
Forklift from coating factory, technical condition good Auction-ID: A1-41964-327
Rotator fork positioner 2030mm staggered 1200mm forks Auction-ID: A1-41964-97
Equipped with 3rd and 4th function; hydrostatic; particulate filter; see-through mast; Spotlight Auction-ID: A1-40136-71
Extra options : Spoon adjuster , All-round lighting , recently inspected , radio , ventilation , closed cabin , Deutz engine Auction-ID: A1-43890-10
Internal number 845 Auction-ID: A1-46329-12
Covidieb ValleyLab Force Triad Software Version: 4.00 Incl.: - Bipolar footswitch - Monopolar footswitch - LigaSure Footswitch - Bipolar tweezers with connection cable - Monopolar handle - Neutral electrode connection cable Auction-ID: A7-46412-9
\" WINI Desk / Work Table \"Form 2000\" – 160 x 80 cm – with permanently installed undermount cabinet Equipment: • Sturdy steel frame • Permanently mounted undermount cabinet with several drawers Condition: Used, with signs of wear and tear due to age and use (slight scratches, discoloration). Scope of delivery: • Desk incl. permanently installed undermount cabinet • Sale without pictured contents / tools / decoration • Dimensions: approx. 160 x 80 x 72.5 cm • Manufacturer: WINI Office Furniture • Model: Form 2000 • Colour: light grey table top, grey frame, beige undermount cabinet \" Auction-ID: A7-46417-306
Industrial control terminals with closed housing for fixed wall mounting. Suitable as an HMI display, machine control panel or visualization terminal in production and workshop environments. Front with glass cover, robust industrial housing. Technical data (resolution, interfaces, touch function) not known. Auction-ID: A7-46417-201
Tilting container ENITOR type K500 Used tipping container made of galvanized steel, suitable for chips, scrap and other bulk materials. Type: K500 Load capacity: 800 kg Content: 500 l Year of construction: 2017 Weight: 150 kg The container is rollable (4 wheels), has a tilting device and is fully functional. Optical traces of use due to previous industrial use present. Dimensions: approx. 110 × 110 × 104 cm (L×W×H). Auction-ID: A7-46417-2
Forklift forks 2840x160x65mm; outer dimensions tube 160x65mm; unused; 10FT; 7408 Auction-ID: A1-45902-223
2x battery 20V; 9 piece drill set; screw-drill machine; angle grinder; impact wrench; nut beater; with inlay; 4 grinding wheels; in original packaging; 5596 Auction-ID: A1-45902-315
diesel power generator Brand: Ford power: 8,125 kVA Engine: 498 cc diesel engine Starting: Electric starter motor Sockets: 1 x 400 volts (CEE 3P+N+E) 1 x 230 volt (CEE 2P+E) 1 x 230 volts (CEE 7/3 – Schuko) Protection: circuit breaker and emergency stop Housing: Soundproofing housing Display: LED Display Keys: 2 keys Weight: 165 kg Degree of protection: IP44 Condition: unused, in the original packaging Auction-ID: A3-43519-523
2x battery 20V; 9 piece drill set; screw-drill machine; angle grinder; impact wrench; nut beater; with inlay; 4 grinding wheels; in original packaging; 5596 Auction-ID: A1-45902-317
Forklift forks 2840x160x65mm; outer dimensions tube 160x65mm; unused; 10FT; 7408 Auction-ID: A1-45902-226
Condition: Used – fully operational, excellent overall condition Power: 120 kW Engine: Diesel, 1,968 cm³ Drive: 2WD Seats: 2 Max. permissible weight: 3,500 kg Max. speed: 150 km/h Mileage: Approx. 298,400 km Registration: Full documentation available (currently registered in Croatia) Note: Engine warning light is on Auction-ID: A7-46408-7
Internal number 837 Auction-ID: A1-46329-13
Tilting container ENITOR type K500 Used tipping container made of galvanized steel, suitable for chips, scrap and other bulk materials. Type: K500 Load capacity: 800 kg Content: 500 l Year of construction: 2017 Weight: 150 kg The container is rollable (4 wheels), has a tilting device and is fully functional. Optical traces of use due to previous industrial use present. Dimensions: approx. 110 × 110 × 104 cm (L×W×H). Auction-ID: A7-46417-5
3400PSI; rated flow 2.6GPM; 212cc; 2.6GPM; 7548 Auction-ID: A1-45902-405
General data: Engine: 1.8 TDCi Mileage: 284000 km Condition: Non-running (engine does not start) Auction-ID: A7-40553-29
LOT 9 Type: Forklift truck Brand: Linde Model: H80D Serial number: E1X353K00231 Year: 1999 Fuel type: Diesel Operating hours: 7720 h Own weight: 12610 kg Lifting capacity: 8000 kg Mast type: Duplex Tire type: Solid rubber Dimensions: Fork length: 1400 mm; Fork width: 1900 mm; Lifting height: 5700 mm; Overall length: 3400 mm; Overall height: 3900 mm Additional information: Diesel: yes. Auction-ID: A7-46289-9
2x battery 20V; 9 piece drill set; screw-drill machine; angle grinder; impact wrench; nut beater; with inlay; 4 grinding wheels; in original packaging; 5596 Auction-ID: A1-45902-314
3400PSI; rated flow 2.6GPM; 212cc; 2.6GPM; 7548 Auction-ID: A1-45902-404
Internal number 823 Auction-ID: A1-46329-14
2x battery 20V; 9 piece drill set; screw-drill machine; angle grinder; impact wrench; nut beater; with inlay; 4 grinding wheels; in original packaging; 5596 Auction-ID: A1-45902-316
Type: Forging Pliers / Hardening Tools / Thermal Protection Name: Hardening Shop Lot Forging Pliers, Thermal Protection & Melting Shells – 25 Pieces Description: Lot from the dismantling of an industrial hardening shop. Included are forging pliers of different designs and lengths for gripping and moving hot workpieces, as well as heat-protective clothing for work on heat treatment plants, and refractory melting or casting shells. The components are intended for use in forging, hardening and heat treatment plants. Sale exclusively as a complete lot. Condition: • Used Scope of delivery: • Forging pliers, various designs and lengths• Thermal protection (heat protective clothing / apron / coat) • Melting or casting shells (fireproof) • Total scope: 25 parts• Delivery as shown • Sale as complete lot • Material pliers: steel • Pliers types: forging pliers / gripping p ...
nominal force:2500 t stroke:600 mm cycle time:13 - 18 s distance between columns:1720 mm Distance table/ram, max. stroke up, adjustment up:2600 mm table surface area:1720 x 1800 mm allowed max. force:4000 t blow die to die:5000 t ram surface:2100 x 1320 mm capacity of ejector in table:40 t ejector stroke in table:250 mm ejector surface area in table:900 x 820 mm capacity of ejector in ram:6 t ejector stroke in ram:40 mm spindle diameter:425 mm power requirement:900,0 kW weight:335,0 t Dimensions (WxDxH):3,4 x 4,6 x 9,7 m height over floor:8,3 m fully-automated forging line:to produce axle shaft
impact energy:207951 mkg ram hammer stroke:660 mm no. of strokes:100 /min impact energy:2040 kJ distance lower die block / ram gudeway:660 mm Throat:750 mm steel forging - rectangular up to:240 mm steel forging - diameter up to:270 mm power requirement:75,0 kW weight of hammer:16,5 t weight of anvil:15,5 t ram hammer weight:750 kg weight:32,0 t dimensions (WxDxH):3,2 x 1,45 x 3,45 m Mode of operation:pneumatisch
maximum number of results exceeded
please refine your search
2.500 € 
