air cooler for used for sale

Forklift tipper body approx. 0.5 m³, grey, nameplate illegible, for plastic residues

Forklift tipper body BAUER Expo 900 Content 0.9 m³ YOC 2017, S/N 647361, Weight 173 kg, Load capacity 1,000 kg, ESP-LSP 470 - 520 mm

Peak force gauge ALLURIS FMI-B20C5 500 N, S/N 46279, accessories, calibration 2019-10, case, internal PM357

Safety cage for truck tires inlet width 580mm, inlet height 1400mm., Total dimension approximately 1800x800x1540mm. Auction-ID: A1-42014-280

Equipped with: closed cabin, LPG fuel system, (no license plate registration) Auction-ID: A1-40135-198

Equipped with 6-Cil. \"Mitsubishi\" diesel engine; Side shift; fork adjuster; spoons: 1400x 150 mm; Auction-ID: A1-40135-169

Forks 1000mm, spoon board with welding pull 1100mm, duplex mast, side shift, led work light, 60V battery pack, charger 230V plug max lifting height 3000mm, max lifting capacity 1500kg Auction-ID: A1-40135-115

Closed heated cab , led work lights , flash light ,blue spot , kaup fork equipment Auction-ID: A3-43515-253

Equipped with: solid rubber tire, SE 4x, gearbox type HY, weight 6.58 t, turning radius 2.75 m, model series 394, engine manufacturer VW, engine type CBJB, 55 kW, mechanical suspension seat, mini-lever control on armrest, work lights. Auction-ID: A1-40135-89

Jungheinrich EFG-5-511 Electric forklift -Totally working/ Bad battery Auction-ID: A3-43515-17029

Equipped with: 4-cylinder Perkins 404 C 22 Turbo engine with 60 hp and 44.7 kW.mast tilt (12°), electro-hydraulic control to lift the cab, and give access to the mechanical parts for maintenance, tires front 275/80 R20, rear 27.10 - 12 14, hydraulic drive, electro-hydraulic reverse gear, Rexroth hydraulic motors for front wheels, Poclain motors for rear wheels, forward/reverse gear 1/1, maximum travel speed 14 km/h, differential lock, overall width 1.44 m, total height (including guard) 1.99 m, overall length 4.04 m, ground clearance 260 mm, seat belt, hour meter, front and rear wipers, hydraulic differential with electro-hydraulic actuation, lockable parking brake switch, shift lever for reversing on the steering column, hour meter replacement on machine, current hour reading is after counter replacement, unknown operating hours for replacement hour meter. Auction-ID: A1-40135-35

Consisting of warehouse rack with contents large batch of various screws Auction-ID: A1-45866-86

Equipped with: mini-lever control on armrest, tow bar, lighting, hydraulically adjustable forks, work lights, adjustable steering column, new battery. Auction-ID: A1-40135-223

Linde battery with automatic filling, led work lights, blue spot front and rear, flash light Auction-ID: A3-43515-250

In soaking state. All functions work! 2003 ETV 114 Jungheinrich reach truck 6500 mm lifting height including battery charger Auction-ID: A3-43515-21340

Featured; Tow bar; Double wheel; Wrap; 3500-KG Towing Weight; Glass coating; Reverse driving camera; Heated seats; Front LED bar; Wrapped. CAUTION! This vehicle has a license plate registration, when you pick it up you must register it on the spot with a third party or export it, there are additional costs involved) Auction-ID: A1-42014-178

Limited edition 1.0 Automatic transmission Air conditioning Electric windows Half leather sports interior Books included 15\" alloy wheels Stick remnants on the roof and rear spoiler of car wrap. Auction-ID: A1-42014-147

Equipped with front weight, rear linkage, PTO, 2 double acting valves rear, read hours: 3848.1, 6-cylinder, speed 2300 rpm, 540/1000 PTO, weight approximately 5000 kg, Auction-ID: A1-40135-72

Equipped with: lifting capacity 2,000 kg (2.0 tons), power supply: 48V electric, two 11 kW AC motors, maximum speed: 20 km/h (loaded/unladen), weight: Approx. 3,400kg, Linde Load Control, double accelerator pedals, 48 volts maintenance-free Auction-ID: A1-40135-41

Project car with V6 engine and Dutch registration; Complete hard-body vehicle; Neat original interior, 4-speed manual gearbox; Engine runs Auction-ID: A1-42014-179

Equipped with: see-through mast, sideshift, extra hydraulic functions, 6 cylinder diesel engine Auction-ID: A1-40135-156

Equipped with lifting capacity: 2500 kg (2.5 tons); Service weight: 3550 kg; diesel engine; Power: 35 hp (26 kW); Max. lifting height: 3000 mm; Load center: 500 mm; Lift speed: 0.25 m/s; Turning radius: 1.8 m; Length: 3.5 m; Width: 1.2 m; Height mast folded: 2.0 m; Before: 7.00-12; Back: 6.00-9; Hydraulic lifting mast; Overhead safety guard; Mechanical or hydraulic transmission; Standard pallet forks; Diesel engine for indoor and outdoor use Auction-ID: A1-40135-165

Equipped with Side shift, SIDESHIFT; 4.3L LPG PSI engine; 7,000 kg (7 tons); Electronic 2-speed Powershift (2F/2R) Auction-ID: A1-40135-164

Equipped with: hydraulically adjustable forks, plywood mast, solid tires, electrically operated, beacon, work lights, tow bar, driving lights, bluespot, freelift Auction-ID: A1-40135-148

Front and rear LED work lights, Overhead exhaust, pre air cleaner, flash light, road lights, 4y Toyota engine Auction-ID: A3-43515-241

Front and rear work lights, heated cabin, overhead exhaust, pre air filter, flash light, suspension carriage, illuminated document carrier Auction-ID: A3-43515-242

Equipped with: freelift, 2x double-acting hydraulic valves, electrical function, LED lighting all around, work lighting, safety lighting bluespot and redstripe, heating in cabin Auction-ID: A1-40135-147

Front fork: 260 wide, 120 long, 125 high, Chainstays: 300 wide, 130 long, 120 high with hydraulic pusher Auction-ID: A1-40135-367

Cometal formwork material (as good as new) • Dimensions and numbers: • 265 cm x 100 cm: 30 pieces • 265 cm x 75 cm: 16 pieces • 265 cm x 60 cm: 6 pieces • 300 cm x 75 cm: 11 pieces • 265 cm x 45 cm: 2 pieces • 265 cm x 50 cm: 1 piece • 265 cm x 55 cm: 1 piece • Inner corners: • 265 cm x 25 cm x 25 cm: 4 pieces The material is in excellent condition and with various accessories Auction-ID: A3-43515-5101

Featured; Tow bar; 7-pin plug; Kitchen block with 3 burner stove; Crane; 4- Seater sofa; Lifting roof; 2-P bed. Bench for in; Stove; Radio CAUTION! This vehicle has a license plate registration, when you pick it up you must register it on the spot with a third party or export it, there are additional costs involved) Please note; Clutch defective Auction-ID: A1-42014-225

Safety cage truck tires Entry width 580mm, Input height 1400mm., Total dimension approximately 1800x800x1540mm. Auction-ID: A1-42014-279

CAPASITY 11 KJ 400 KG

Heated seats Air cushion seat from Grammer LED headlights Spot front yellow signal warning light LED reversing lights and spot Auction-ID: A1-45975-3

Hydraulic hoses on the attachment NEW Signal Strobe Light Blue Spot Rear Auction-ID: A1-45975-19

Euro precursors: 1x Vatican John Paul II, 2 Euro 2000, 2x France 2007, Benedict XVI

Lever test bench for compressive force measurements SAUTER TVP 500N, 70 mm, S/N 4507061114

Peak force gauge ALLURIS FMI-B20K1 1000 N, S/N 43779, accessories, calibration not permitted, case, internal PM358

Tool trolley FORMAT, small contents

Forklift tipper body white approx. 0.5 m³, no nameplate, internal No. 11

Forklift tipper body ROTHERM SKS75 built in 2018, load capacity 1,350 kg, dead weight 175 kg

Manufacturer: Clark • Model: C500 Y100 LPG • Year of Make: 1990 • Operating hours: approx. 2,800 h (read) • Propulsion: LPG (gas) • Load capacity: 5,000 kg • Lifting height: approx. 3,300 mm Equipment: • Sideshift • Fork carriage with forks • Work lights • Overhead guard • Pneumatic tyres Condition: • Used, good general condition • Functional (lifts, lowers, drives) • Engine running, hydraulics working • Usual age-related signs of wear present Auction-ID: 04L-N2R-1

A horizontal flow-wrapping machine used in the food industry is available. Packaging weight min/max: 80g/1000kg. On-site inspection is possible.

Blue Spot front and rear LED headlights 2x front, 1x rear Battery 02/2022 Auction-ID: A1-45975-18

Side window, missing left rear Max fork width max: 1750 mm Front lighting: spot and driving lights Rear lighting:Spotlight and return ticket turret and rear lights with brake light yellow signal light Windshield wipers front and rear Seat with seat heating Ventilation and heating Auction-ID: A1-45975-14

Max fork width 1.75 m Front lighting, spotlight and driving lights Rear spotlight and reversing lights as well as rear lights with brake light yellow signal light with windshield wipers front and rear Seat with seat heating Ventilation and heating Auction-ID: A1-45975-13

On offer is an electric burger patty forming machine from Gesame Food Maschinery for portioning and forming minced meat/fish/potato or other masses. Technical data: Manufacturer: GESAME Food Machinery Model: MH-100 A Serial No.: 101654 Year of Make: 2020 The device is currently at our customer's site in Pasewalk and is being sold due to restructuring. The device has not been tested for functionality and completeness, so a viewing is recommended. Only the offered assets are expressly sold, any items that can be seen in the photos are expressly not part of the scope of the offer. We sell the assets on behalf of our customers. The offer prices are net prices in EURO ex works. Since these are used assets, we sell them without guarantee or warranty as well as the right to take back. The offers are subject to change, subject to errors and subject to any prior sale. Our terms an ...

SCM COMPACT 23 – Four-way planer with quick-change system | Built in 1993 For sale is a robust and precisely working four-sided planing machine SCM COMPACT 23, built in 1993, from professional joinery application. The machine is equipped with 4 spindles (bottom, right, left, top) and is ideal for profiling, calibrating and planing solid wood. A special highlight is the integrated quick-change system for the planer blades, which significantly accelerates tool changes and reduces set-up times in everyday production. The convenient adjustment of the milling spindles via handwheels with counter mechanism allows precise and repeatable machining of workpieces. The feed unit works reliably and is designed for small to medium-sized series production. The condition of the machine is good for its age – it is ready for immediate use. Can also be used as a production line with the belt ...

Robust and robust Yale LPG forklift with a lifting capacity of 2,500 kg, suitable for intensive industrial use. The machine starts and drives smoothly and is equipped with a reliable LPG drive, ideal for continuous operation without charging interruptions. The forklift shows signs of wear and rust in accordance with age, but is known for its simple and durable technology. Extremely suitable for warehouses, workshops or outdoor areas; seller can charge for FREE for transport Auction-ID: A3-43519-10060

A horizontal flow-wrapping packaging machine Hugo Beck is available. Cycle rate: 5000/h, max. product width: 480mm, max. product height: 150mm, min. product length: 40mm, working height range: 820mm-900mm, max. roll diameter: 400mm, max. roll width: 600mm, roll materials: PO/PE/PP, machine width: approx. 1700mm, weight: approx. 2100kg. Including film folding device FF700-IN, print mark control, seal welding, overlap longitudinal sealing 10mm-30mm, pressure belt and pressure roller. Documentation available. An on-site inspection is possible.

Cascade Clamp with pressure control and forward tilting, 5 valves, led work lights, blue spot, flash light, hoppecke trac air battery with suitable charger Auction-ID: A3-43519-258