air cooler for used for sale

Manufacturer : REHM Thermal Systems Model: VXS air 3500 (Type 734) Type: Convection Reflow Soldering Oven Quantity available: 2 units Condition: Used Key Specifications - Heating zones: 7 pre-heating zones / 3 peak zones / 4 cooling zones - Fan control: 1x top heating fan regulation - PCB width: 55 to 460 mm (with centre support from 65 mm), optional 508 mm - Chain pins: nickel-plated, 5 mm bolt length standard - Transport system width adjustment: manual (electric touchpad operation) - Heating: top and bottom heating - Display: flat screen and three-colour signal lamp - Control system: industrial PC with Ethernet network interface - Software: Vicon with Windows 10 Enterprise LTSC - Certification: CE compliant - Standby mode: Yes Find more here - / Contact us at -

Offer 26042 Operating hours 49500 h - Operating pressure 11 bar - Delivery rate 680 l/min. - Drive 400 V / 5.5 kW - Engine speed 2950 rpm - Air tank 200 L - Space requirement approx. W 600 x H 1600 x D 1000 mm - Weight approx. 250 kg

- Exhibition machine -For continuous air demand and intermittent operationElectronic control for reliability and efficiency.Increased flexibility thanks to two compressed air tanksHigh-quality and expandable equipment.Smooth and quiet. Due to temperature control of the oil, it can also be used in intermittent operation. Equipment DUO KKwith refrigerant dryer and fine filter as pre-filter upstream of the refrigeration dryerCondensate conditioner for oil - water separationAutomatic steam trap.---------- Technical data

Micro-blower instead of compressed air-driven nozzles, e.g., for installation in front of the inkjet coder for drying the coding area, all-aluminum housing, IP67 protection rating, integrated electronics, power consumption: max. 190 watts, compact, quiet (55 dB(A)) and efficient, flow rate at 43,000 rpm: min. 160 l/min, pressure: 119 mbar, optional power supply., This small and quiet 24-volt fan, IP67 rated, delivers incredible performance. See for yourself!, - Energy savings of up to 90% compared to compressed air applications, - Easy installation, - Only about 70 decibels, - Can also be used as a vacuum blower, Power consumption: max. 190 watts

An automatic Munder blow-off system for cleaning cylindrical air filter cartridges is available. Compressed air supply: 6bar-8bar, quality: 5, nozzle pressure: 6bar, volumetric flow rate: 190m³/h, vacuum: 20kPa, max. filter height: 1400mm, max. filter diameter: 540mm. Documentation available. An on-site inspection is possible.

feed pressure: 10 bar Number of working hours: 69.551 / 38.921 h total power requirement: 11 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

IHI TURBO OIL FREE COMPRESSOR, WATER COOLED Model : TRA20-235kW Origin : Fully Made in Japan Operating Condition Gas : Compressed Air Capacity : 40m³/min Suction Temperature : 35ºC (Design Point) Relative Humidity : 80% Discharge Pressure : 6barG Compressor Specification No of Stage : Three Output of Driver : 235 kW Voltage : AC415V / 50Hz / 3PH Noise Level : 85dB Starter System : Inverter Starter Cooling Water : Fresh Water Inlet Temperature : 32ºC Water Requirement : 35m³/h Dimensions L x W x H (mm) : 3,700 X 2,000 X 2,000 Weight : 7,100 kg

Panel thickness: 8 - 50 mm Thickness of the edges: 0,4- 3 mm Feed speed 8 - 11 m / min PU pressure rollers Equipment: Squaring unit, 2 motors 2,2 kW Panel edge heating Edge magazine for coil and strips Hot melt application with roller Airtec AT4510 unit The Airtec aggregate is positioned so you can use Airtec or the standard glue pot Motorized side pressure unit End trims, 2 motors, pneumatic positioning straight and with chamfer trimming unit above / below Contour trimming unit Profile scraping unit Glue scraping unit Polishing unit Detergent spray system central lubrication

Fixators, leveling units, leveling elements, machine foot, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot -Fixators: for machine tools and systems -Minimum height: 75 mm -Max. height: 95 mm -Price: per piece -Quantity: 4 pieces -Dimensions: 230/180/H80 mm -Weight: 12.3 kg/piece

radial fan, dust extraction blower, fan, extraction, dust blower, blower -Manufacturer: Airheat, radial fan with soundproof housing -Type: RDH-500-11.0 -Volume flow rate: 20000 m³/h -Motor: Hoyer 11 kW 1460 rpm -Dimensions: see technical drawing in the photos -Overall dimensions: 1800/1110/H2900 mm -Total weight: 584 kg

Fixators, leveling units, leveling elements, machine base, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot, spring elements -Manufacturer: Air Loc Schrepfer, leveling elements 4 pieces for machine tools and systems -Type: GLV 150 -Height: 32 mm -Price: complete -Dimensions each: 140/140/H32 mm -Weight 2.5 kg/piece

Fixators, leveling units, leveling elements, machine feet, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot -Fixators: for machine tools and systems -min. height: 75 mm -Max. Height: 90 mm -Price: per piece -Number: 6 piece -Dimensions: 245/110/H85 mm -Weight: 11.1 kg/piece

Pneumatic cylinder, air cylinder, pneumatic piston, air piston, standard cylinder -Stroke travel: 100 mm -Piston diameter: 80 mm -Piston rod: Ø 25 mm -Total length: 320 mm -Total length extended: 420 mm -Quantity: 2 available -Price: per piece -Dimensions: 96/96/H320 mm -Weight: 4.35 kg

Digestorium exhaust system for pharmacies, chemistry and medicine -Interior dimensions: 540/850 / H900 mm -Stainless steel version -Glass door front -With Camfit filter cartridge -Connection: 0.085 kW -Type suction: EB 225 -with extractor hood -Dimensions: 675/900/H1200 mm -Weight: 100 kg

Ventilation system, comfort compact ventilation, ventilation control, ventilation device control -Manufacturer: Aircool WGB control ventilation device -Type: unfortunately no exact type designation -Individual components: see photos -Quantity: 19x controls available -Price per piece -Dimensions: 380/240/H415 mm -Weight: 14.7 kg/pc.

Compressor, compressed air unit, piston compressor, quiet running compressor, compressor for dentistry, quiet running compressor -Manufacturer: Jun-Air, quiet compressor type OF301 -Motor power: 250 W -max. pressure: 8 bar -Number: 2x compressor available -Price: per piece -Dimensions: 220/160/H230 mm -Weight: 9.2 kg/piece

Fixators, leveling units, leveling elements, machine base, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot, spring elements -Manufacturer: Air Loc Schrepfer, leveling elements 4 pieces for machine tools and systems -Type: GLV 150 -Height: 30 mm -Price: complete -Dimensions each: 145/145/H30 mm -Weight 1.7 kg/piece

Fixators, leveling units, leveling elements, machine base, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot, spring elements -Manufacturer: Air Loc, leveling elements 2 pieces for machine tools and systems -Type: GLV 110 -Height: 25 mm -Shipping/Price: complete -Dimensions each: 125/125/H25 mm -Weight 1.2 kg/piece

Fixators, leveling units, leveling elements, machine foot, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot, spring elements -Manufacturer: Air Loc, machine feet (4 pieces) for machine tools and equipment -Type: GLV 110 -Installation height: 25 mm -Submission/Price: complete -Dimensions (each): 125/125/H25 mm -Weight 1.2 kg/piece

Forklift forks, forks, forklift tines with anti-slip coatingLoad capacity: approx. 2.5 ton. Tine length: 1600 mm Tine width: 100 mm Tine thickness: 50 mm (40 mm metal + 10 mm rubber coating coating)Fork carriage height: 405 mm - suitable for tine holder: FEM 2 Form B rubber coating as anti-slip coating and for protecting transport goods? Rocker arm lockWeight: 145 kgas good as new, unusedFor a 2.5 ton. Forklift.; used

MF-25 Corner Forming Machine

• Stainless steel pharmaceutical version • Payload 350 kg • Lifting height top of fork approx. 140 cm without telescope • Fork width 170 cm, fork length 115 cm • Drive • New accumulator • New charger • Only 71.3 operating hours • El. connetcion 230V/50Hz

Komatsu Forwarder 845 motor A G C O power 49 AWF - only 2000 hours engine contaminated ( presumably a wrong liquid was poured in when the machine was out in the forest ) Price from Leende - Ned. € 3.000,=

The workpiece return transport consists of an air cushion table with pneumatic tilting movement, complete with pusher, return conveyor with motorised belt and a not-driven roller conveyor. The panel comes out of the edge banding machine onto the air cushion table which tilts over and drops it, with the aid of the pusher, onto the return belt, situated at a lower level. The air cushion table has transfer belts to takeover the parts from the edge banding machine. Dimensions of air cushion table 1.200 x 2.400 mm Belt width 1.300 mm Installed power 3 kW workpiece return transport is deliverable for basic edge banding machine length 3.500 up to 12.500 mm

Intelligent transport systems Brand: Formetal Type: diverse Wehrmann offers tailor-made transport systems for a wide variety of requirements. No matter whether it is about the transport of carcasses, single plates or stacks. For every transport task, however unusual, there is the optimal system, with a superordinate control that can recognize parts, send them on the right journey and integrate the connected machines. Roller conveyors, chain transports, webbing systems, link belt conveyors, turning stations, carcass erectors, carcass turners, etc ... All of these transport units, which are tailored to your requirements, are provided with a current touch-panel control computer, via which a complex line can be centrally and simply controlled. With a perfect design and tuning of the mechanical components, with a frequency-controlled speed control, both high feed rates can ...

The machine could also be used as a transport belt conveyor. Transport input length 2.000 mm Transport output length 1.000 mm Transport width 600 mm Working height 500 - 700 mm Transport speed 7 - 35 m/min.

New stack turnover machine Brand: Formetal Type: RT.180 PL Technical data: Usable width of roller conveyor: 1.000/1.200 mm Length of roller conveyor: 3.300 mm Min. stack height: 1.150 mm, max. stack pelhöhe: 1.600 mm Min. stack width: 300 mm Max. stack length: 3.000 mm Max. stack weight: 2.800 kg In- and outfeed roller conveyor - Roller Ø 89 mm - Distance between roller 190 mm - Drive with fix rotation speed motor 10,5 m/min. - Installed electrical power: 5,0 kW - Pneumatical door opening system - Stack turner RT.180PL 1000 Max. stack width: 1.000 mm Working height (for roller conveyor width 1.000 mm): 250 mm - Stack turner RT.180PL 1200 Max. stack width: 1.200 mm Working height (for roller conveyor width 1.200 mm): 400 mm

🔧 Strong, flexible, and immediately available! Buy the Form-on clamp new  - compatible with Doka Frami - and equip your site with reliable formwork accessories . The clamp locks precisely into the profile recesses of the Frami panels and can be fixed at any position †for a secure and fast connection. ⚡ The wedge is protected against falling out, ensuring maximum safety at work. 🌍 Delivered in used reusable containers ♻ †sustainable and well protected. Please note: Containers are not included in the unit price . 🔍 Checking quality made easy: either live at our Form-on warehouse or conveniently online via smartVISIT †the fast solution to see the quality without the need to travel. 👉 Looking for Frami accessories , new clamps , or want to buy Form-on clamps right away? Then act now †before your advantage ...

Form-on multi function clamp - compatible with Doka Framax/Ringer Master  †strong, versatile, reliable 🚚   With the Form-on multi function Clamp , you can connect your frame panels in no time. It provides tension-resistant and stiffening connections †whether it’s element, adjustment, or extension connections. This allows you to work safely, stably, and flexibly on the construction site. ⭐   The galvanized surface reliably protects against corrosion, while the practical 40 cm length ensures a perfect fit for your formwork solutions. 🔧   And because we know you value efficiency, we deliver the multi function Clamp in a practical packaging unit: 🚚 100 pcs in 1 MWC   With the Form-on multi function Clamp, you choose quality that lasts †and a tool that makes your job site smarter. 💪 Price: from € 3 ...

⚡ New in the Form-on range †get yours now! ⚡ Buy the Form-on adjustable clamp new - compatible with Doka Framax/Ringer Master - and equip your project with the perfect formwork accessory . The adjustable clamp ensures a tensile-strength connection , is galvanized, robust, and delivers reliable performance †even under the toughest conditions. 💪 🌍 Packed in used reusable containers ♻ †sustainable and safely transported. Please note: Containers are not included in the unit price . 🔍 Still unsure? Convince yourself: either directly at our Form-on warehouse or conveniently and digitally via smartVISIT †the fast solution to experience the quality live without having to come by. 👉 Whether you’re looking for Framax accessories , new adjustable clamps , or want to buy Form-on adjustable clamps r ...

Form-on Quick-acting Clamp RU †compatible with Doka Framax/Ringer Master - your strong partner on site 🔧   When it comes to connecting frame panels, you need a solution that is fast, safe, and hassle-free. That’s exactly what the Form-on Quick-acting Clamp RU delivers. Thanks to its smart design, it grips flexibly into the continuous recess of the frame profiles †at any position you need. This saves you valuable time and gives you maximum freedom during assembly. ⭐   The integrated wedge is secured against falling out. For you, this means less risk, more safety, and noticeably easier handling. That way, you can complete your formwork tasks efficiently, reliably, and without unnecessary interruptions. 🚀   And because you deserve not only quality but also great value, we deliver the Form-on Quick-acting Clamp RU in a practical packagin ...

🔥 Highlight offer at Form-on! 🔥 Buy the Form-on super plate 15.0 new †available now and ready for immediate delivery. These new super plates are an absolute must-have in formwork accessories : robust, galvanized, and perfect for use with tie rods . 💪 ✨ Special extra: Delivery comes in used reusable containers ♻ †sustainable and safely packed. Note: Containers are not included in the unit price . 🔍 Want to check the quality yourself? No problem: You can inspect the material anytime at our Form-on warehouse †or conveniently via smartVISIT , the digital and fast solution to get an impression of the quality without having to come by in person. 👉 Looking for anchor plates , new super plates , or want to buy Form-on super plates right away? Then don’t miss out on this offer †only while stocks las ...

The BIRO F2000N, F3000N, F4000N & HD3000EHN Food / Patty Forming Machines are designed for production of a wide variety of meat and food products, with maximum production output capability from approximately 2000 to 4000 formed products per hour. A large number of drum mold die shapes are available. They vary from the standard round shapes of different diameters to special shapes such as square, oval, rectangle, fish, cutlet, heart, chicken leg, chicken nuggets, rabbit, bone, tree, pork chop, etc.

Dear Sirs, We are pleased to offer the following Used Open Die Forging Press, manufactured by Kawasaki (Japan), a well-known and reputable Japanese OEM. EQUIPMENT OVERVIEW Equipment: Open Die Forging PressManufacturer: Kawasaki (Japan) Manufacturing Year: 2012 Condition: Used, in production until May 2025 Application: Forging of rings and heavy forged components The press owner supplied forged parts (mainly rings) for power plant applications to leading OEMs such as Mitsubishi, Toshiba, GE, Hitachi, Fuji, etc. TECHNICAL SPECIFICATIONS General Press Capacity: 2,000 ton System Pressure: 30.0 MPa Pulling Capacity: 1,000 kN (100 ton) at 19.5 MPa Number of Cylinders: 3 Main Cylinder Diameter: 796 mm Press Weight: Approx. 130 ton Stroke & Daylight Stroke: 1,500 mm Daylight: 2,300 mm Table Fixed Table Size: 1,650 mm (R.L) × 2,400 mm (F.B)  ...

Formax ULTRA26 Former  The ultimate burger machine Suitable for forming a broad range of meat, poultry and non-meat products. It is commonly used by high-volume processors to form popular products such as burger patties, pork sausage, chicken fillets and chicken nuggets. Delivers precise weight and shape control while forming products with a natural texture and excellent appearance.

bushing cut-off , PKO , IFO , 2 forma packs , PNP Transfer diameter range 14-22 mm number of dies 7 number of stations 8 cutting length 4-67 mm shaft length under head 4-75 mm output - pieces/min 175 press power 200(126) to max. outside dia. of round pie 42 mm

Met RoboHelix-machines kunnen spiraalvormige schoepen worden gevormd uit standaard ronde of van een patroon voorziene werkstukken. RoboHelix-machines vereisen uiterst nauwkeurige synchrone bewegingsbesturing. Door de gebruiker gegenereerde gegevens worden vanuit cloudgebaseerde software, HelixNinja, naar het apparaat gedownload. Deze informatie wordt vervolgens verder verwerkt om coördinaten in het 3D-vlak te genereren, waarmee het proces van het creëren van een vliegtuig vanuit een blanco basis wordt nagebootst. De motoren volgen synchroon deze coördinaten om het vliegtuig te produceren. Met de elektronische nokkenplaatfunctie in TwinCAT NC Camming (TF5050) is relatieve synchrone beweging overal en altijd mogelijk. Afmetingen en toleranties zijn geen probleem meer zodra de motoren en aandrijvingen zijn gekalibreerd. De tweede generatie RX250 uit de machinelijn van RoboHelix heeft een ...

Deze spiraalvormige bladenvormmachine is een koudwalsmachine voor het continu walsen van spiraalvormige bladen uit stripstaal. Door de parameters aan te passen (walsoffset, invoerhoogte, walsdruk, geleidingswiel, enz.) kunnen bladen van diverse specificaties worden gewalst.

FORMING MACHINE KOPPENS, MODEL: VM 600 HS Technical description: Machine number: VM 600 HS-481 Power supply: 380 V, 45.47 A, Ph 3, 50 Hz Power: 22.09 Kw Weight: 1675 Kg Conveyor width: 600 mm Dimensions: 2400 x 1300 x 2100 mm Different formats available

FORMING MACHINE KOPPENS, MODEL: VM 600 Technical description: Serial number: VM-600-55 Power supply: 415 V, 3 Ph, 50 Hz, 23 A Power: 11,31 kW Conveyor width: 600 mm Form size: (7x) 60 mm Weight: 850 Kg Dimensions: 2000 x 900 x 1950 mm

FORMING MACHINE KOPPENS, MODEL: VM 600 HS Technical description: Serial number: VM 600 HS-281 Conveyor width: 600 mm Weight: 1.750 Kg Power supply: 380 V, 3 Ph, 50 Hz, 45 A, 22 kW Dimensions: 2400 x 2100 x 2200 mm

FORMING MACHINE, KOPPENS TYPE: VM 400 Technical description: Serial number: VM 400/30-1517 Power supply: 380 V, 3 Ph, 50 Hz, 4,94 kW, 12.39 A Weight: 550 kg Mesh belt conveyor Conveyor width: 400 mm Dimensions: 2400 x 680 x 2270 mm

FORMING MACHINE, KOPPENS TYPE: VM 400 HD Technical description: Serial number: VM400 HD-1717 Power supply: 380 V, 3 Ph, 50 Hz, 7,67 kW, 16.57 A Weight: 830 kg Mesh belt conveyor Conveyor width: 400 mm Dimensions: 2000 x 950 x 2350 mm

FORMING MACHINE KOPPENS, TYPE: VM 400 HS Technical description: Serial number: VM 400 HS-1481 Power supply: 380 V, 3 Ph, 50 Hz, 23 A, 7,77 kW Weight: 810 kg Dimensions: 1900 x 900 x 2200 mm

FORMING MACHINE, FORMAX TYPE: PFM-19 Technical description: Serial number: 416 Power supply: 380 V, 3 Ph, 50 Hz, 27.6 kVA, 42 A Conveyor width: 550 mm Format diameter: (3x) 120 mm Dimensions: 3000 x 1000 x 2700 mm The Fl9s hydraulic injection forming system offers extremely accurate weight control and the ability to manufacture a wide range of products at different temperatures. It achieves high performance and forms products with a natural texture and excellent appearance.

Model: F-19 Jaar 1996 Conditie Gebruikt Serienummer: 326 Voorraad nummer: 2574 Belt width:, 510 mm Capacity: 25 - 75 strokes/min. Hopper: 240 kg Mould: oval, (6x) 91x69 mm Power: 3 x 400V, 50Hz, 22kW Dimensions: 3700 x 1350 x 2600 mm Weight: 2150 kg

Gr. Pulling force 10 to, gr. Stroke 1000 mm , cutting speed 7.5 m/min, return speed: 24 m/min, weight: 6.2 to, built: 1987

Technical data: Make: Moehringer Length: 1900 mm Width: 60 mm - Good condition - Used to transport parquet friezes - Tipping stool and adjustable stem holder Pictures and further information on request

technical data: Funding length: 2 m Axle distance: 1.8 m Bandwidth: 1500 mm

Gr. Pulling force: 16 to., gr. Stroke 1250 mm, Gr. Cutting speed: 5, 6 m/min Gr. Return speed: 30 m/min