air cooler for used for sale

Type: Condensate treatment unit Max. compressor volume flow: Up to 10 m³/min (model dependent) Hydrocarbon concentration: < 10 mg/l (compliant with environmental standards) Max. inlet pressure: 16 bar Connections: Condensate inlet: 1/2\" BSP | Discharge: 1/2\" BSP Temperature range: Condensate/control air: 1–60 °C | Ambient: 1–45 °C Material: Corrosion-resistant, high-quality build Maintenance: Easy access, tool-free filter replacement Dimensions (L x W x H): 600 x 400 x 800 mm Weight: Approx. 20 kg Auction-ID: A7-45988-11

Type: Refrigeration dryer with thermal mass control Model: SECOTEC (type TA 8 or higher) YOM: 2013 Flow rate: 2.55 m³/min Power consumption (100% flow): 0.80 kW Power consumption (50% flow): 0.53 kW Pressure loss: 0.20 bar Air connection: G 1 Condensate drain: G 1/4, ECO-DRAIN 30 with ball valve Electrical supply: 230 V / 1 Ph / 50 Hz Dimensions (W x D x H): 620 x 540 x 963 mm Weight: 116 kg Features: SECOTEC controller with dew point trend display, cycling refrigerant compressor, insulated cold surfaces, floating alarm contacts Auction-ID: A7-45988-22

Type: Screw compressor Model: Kaeser SX 8 YOM: 2018 Rated power: 5.5 kW Air flow: 800 l/min Max. pressure: 11 bar Working hours: 19,742 h (17,808 h under load) Time left to maintenance: 3000 h Control system: SIGMA CONTROL 2 with RFID reader Rotor: SIGMA PROFILE, energy-saving, low-speed Motor class: IE3 premium efficiency Dimensions (D x W x H): 590 x 632 x 970 mm Weight: 155 kg Features: RFID card, SD slot, KAESER cooling system, quiet & compact, high efficiency Auction-ID: A7-45988-19

Paint Roller Set – Clever Paintbrush System approx. 1700 pcs. consisting of: 1x Large paint roller with integrated tank, 1x Small roller for corners and hard-to-reach places 1x edge brush, 1x measuring cup with spout, 1x shelf for roller, 1x handle 3x extension poles for comfortable working on high walls or ceilings Material: Plastic, Foam, Stainless Steel - Colour: Blue/Black/Silver Car Air Freshener approx. 1700 pcs. Material: Aluminum alloy or ABS plastic (depending on the version) Color: Black (matte) Design: Compact with ventilation clip, Compatible with fragrance sticks / aroma sticks b>In addition, the following are included: Air Freshener Refill – Purple 988 pieces Air Freshener Refill – Yellow 900 pieces Air Freshener Refill - Blue 740 pieces Air Freshener Refill - Green 200 pieces Air Freshener Refill - brown 4 pieces Universal socket wrench w ...

Alco food-machines hot air tunnel, type: AGU 600/6000-E, serial number: 02725228, year of construction: 2017, 400 V, 50 Hz, 222 A, 148 kW, weight: 4000 kg, s/s mesh belt, belt width: 600 mm, cooking length: 6000 mm, clearance: 680 mm x 250 mm, total dimensions: 7100 mm x 1900 mm x 2700 mm. Including s/s filter tub.

The HOSHIZAKI IM-240DNE-HC is a modular, air-cooled and stackable ice cube maker for professional use in restaurants, bars, hotels and communal catering. With a production capacity of up to 210 kg of ice cubes per 24 hours, the device is ideal for companies with consistently high ice requirements. The model produces L-cubes (standard) and uses the natural refrigerant R290. Thanks to the automatic rinsing cycle, closed water circuit and electronic control, a consistently high ice quality is supported. The easy-to-clean air filter and the robust construction with stainless steel frame inside contribute to a long service life and less maintenance. The storage container is not included and sold separately. Important data at a glance: Model: IM-240DNE-HC Ice type: Ice cubes / L-cube (standard) Design: modular, stackable Cooling: air-cooled Ice production: 210 kg/24h Refrigerant: R290 Dimensio ...

Vita Airomat Dental Curing Device Auction-ID: A7-46327-129

J&G Pro Mobile Air Conditioner 9000 BTU with Wifi and Heating Function Specifications: Brand: J&G Type: Pro Cooling capacity: 9000 BTU Air displacement: 330 m³/hour Functions: cooling, heating, drying, ventilating, sleep mode Power supply: 220–240 V Power: approx. 950 W Current: 4.3 A Noise level: approx. 65 dB Energy class: A Certification: CE, GS, RoHS Exhaust air hose length: approx. 150 cm Features: Wi-Fi functionality Remote control Wheels for moving Air filter (cleanable) Universal exhaust air kit (window kit) Exhaust air hose Instruction Manual Particularities: Suitable for cooling and heating living, working or sleeping areas Windowkit not suitable for tilt windows Advice store retail price per piece: €349,- Auction-ID: A1-40106-85

Good condition Auction-ID: A7-46327-127

Unaudited Auction-ID: A7-46327-256

Connection: 230V Auction-ID: A1-46037-2983

J&G Pro Mobile Air Conditioner 9000 BTU with Wifi and Heating Function Specifications: Brand: J&G Type: Pro Cooling capacity: 9000 BTU Air displacement: 330 m³/hour Functions: cooling, heating, drying, ventilating, sleep mode Power supply: 220–240 V Power: approx. 950 W Current: 4.3 A Noise level: approx. 65 dB Energy class: A Certification: CE, GS, RoHS Exhaust air hose length: approx. 150 cm Features: Wi-Fi functionality Remote control Wheels for moving Air filter (cleanable) Universal exhaust air kit (window kit) Exhaust air hose Instruction Manual Particularities: Suitable for cooling and heating living, working or sleeping areas Windowkit not suitable for tilt windows Advice store retail price per piece: €349,- Auction-ID: A1-40106-70

Hydrovane vane compressor with dryer (replace vanes) Auction-ID: A1-41994-32

Unaudited Auction-ID: A7-46327-213

Unaudited from company closure Auction-ID: A7-46327-53

Unaudited Auction-ID: A7-46327-171

The HOSHIZAKI CM-50KE-HC is a plug-in, air-cooled cube ice maker for professional use in gastronomy, bar, catering, medicine and food presentation. With a production capacity of up to 55 kg of cube ice per 24 hours, the compact device is ideal for farms with constant ice demand. The model produces cubelet ice, a compact, pellet-like ice mold with a pleasant texture that cools drinks quickly and is particularly suitable for soft drinks, cocktails and self-service areas. The natural refrigerant R290 supports energy-efficient operation. Thanks to stainless steel, closed water circuit and proven screw conveyor system, the device is designed for hygiene, durability and reliable performance. Important data at a glance: Model: CM-50KE-HC Ice type: Cubeleteis Type: plug-in Cooling: air-cooled Ice production: 55 kg/24h Refrigerant: R290 Dimensions: 498 x 570 x 697 mm Material: stainless steel hou ...

The HOSHIZAKI FM-600AKE-R452-SB is a modular, air-cooled flake ice maker for professional use in food service, fish counters, food presentation and medical areas. With an output of up to 600 kg of flake ice per 24 hours, the device is ideal for high demands in daily operation. The proven screw conveyor system ensures efficient ice production with optimized water consumption. The robust design with stainless steel base supports a long service life and reliable use even in demanding environments. Important data at a glance: Model No.: FM-600AKE-R452-SB Ice type: flake ice Design: modular Cooling: air-cooled Ice production: 600 kg/24h Power: 1.9 kW Refrigerant: R452 Dimensions: 560 x 700 x 780 mm Compatible tanks: B140SA, B210SA, B340SA Original price: 16689,75 Euro Auction-ID: A1-45807-1

Parameter Value Model Name Herkules 450/10/50 Type Piston Air Compressor Tank Capacity 50 litres Max. Operating Pressure 10 bar Motor Power 2.2 kW / ~3 HP Voltage 230 V AC Frequency 50 Hz Engine Speed 2800 rpm Air Intake Capacity 400 L/min Air Delivery (Effective) 320 L/min Noise Level 95?97 dB Number of Cylinders 2 (twin cylinder) Lubrication Oil-lubricated system Typical Uses Home workshop, tire inflation, air tools, painting

Compressed Air Plasma Cutting Machine Brand: Stahlfest Type: SFPC50 Maximum cutting thickness: max. cutting thickness 20 mm Connection: 230 volts Adjustable amperage: 20-40 amps Start: "scratch-start" duty cycle: 40% duty cycle (40A) Technology: IGBT Technology Including: plasma torch, accessories and protective cover Condition: Unused and in the original packaging

Compressed Air Plasma Cutting Machine Brand: Stahlfest Type: SFPC130 Maximum cutting thickness: max. cutting thickness 45 mm Connection: 380 volts adjustable current: 30-120 A Start: Equipped with: Pilot Arc duty cycle: 60% duty cycle (120 A) Technology: IGBT Technology Protection: circuit breaker Additional function: Plug for CNC control Including: plasma torch, accessories and protective cover Not included: power cable and 380 volt plug Condition: Unused and in the original packaging

Compressed Air Plasma Cutting Machine Brand: Stahlfest Type: SFPC130 Maximum cutting thickness: max. cutting thickness 45 mm Connection: 380 volts adjustable current: 30-120 A Start: Equipped with: Pilot Arc duty cycle: 60% duty cycle (120 A) Technology: IGBT Technology Protection: circuit breaker Additional function: Plug for CNC control Including: plasma torch, accessories and protective cover Not included: power cable and 380 volt plug Condition: Unused and in the original packaging

Compressed Air Plasma Cutting Machine Brand: Stahlfest Type: SFPC70 Maximum cutting thickness: max. cutting thickness 20 mm Connection: 380 volts adjustable current: 20A - 60A Start: scratch-start duty cycle: 60% duty cycle (60A) Technology: IGBT Technology Protection: circuit breaker Including: plasma torch, accessories and protective cover Not included: 380 volt plug Condition: Unused and in the original packaging

Compressed Air Plasma Cutting Machine Brand: Stahlfest Type: SFPC50 Maximum cutting thickness: max. cutting thickness 20 mm Connection: 230 volts Adjustable amperage: 20-40 amps Start: "scratch-start" duty cycle: 40% duty cycle (40A) Technology: IGBT Technology Including: plasma torch, accessories and protective cover Condition: Unused and in the original packaging

Front forklift OK Type DFG KLF construction year 1969 pay load 2,500 kg axle load in front 6,230 kg - behind 2,510 kg unloaded weight 5,120 kg zulaess. Total weight 7,620 kg with questions we stand to you with pleasure at the possession.

C-Module AUSTRIA ERICH PETER MASCHINEN-PLANTS GMBH A - 7083 Purbach - Austria office@machines-plants.at www.machines-plants.at Affordable housing, affordable houses, Hotels - Residential complexes - Residential complexes - Detached houses - cheap houses we have sold our used ones, we also offer NEW C-Module 3000 mm x 6000 mm NEW FORMEN Cheap houses - cheap apartments I am proud to introduce you to our improved system for building affordable homes. Especially for villages and small towns. But hotels have already been built in this way - we can do all the planning for them. A useful system also for stairwells, corridors and elevator shafts - easy to manufacture. It is a modular system, but still flexible in the size of the room and in the positioning of the windows and doors. Connecting to other materials such as wood, glass and concrete slab is easy. Th ...

Hydraulic fork positioner 550-2000 mm Fork positioner hydraulically by 550-2000 mm, Stacker, has been in use at 2.5 to can be mounted but on any truck, mast, front loader, etc, with integral Sideshift. Adapter plate with mount slots for cultivation. Dimensions available upon request. Adapter plate surface area approx. 715 x 650 mm. Valve block hydraulic pump can be supplied. Sale and mistakes are expressly reserved. Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

The high-load timber-beam formwork with a system grid The pre-assembled standard elements of Doka timber-beam formwork FF20 combine the advantages of timber-beam formwork with the grid-related advantages of a framed formwork system. Their very high load-bearing capacity offers a new degree of freedom when it comes to fulfilling architectural specifications in a cost-effective way. FF20 is suitable for fair-faced concrete categories SB1 to SB4, as defined in the DBV Code of Practice. High pouring rates made possible by extra-strong components Up to a pour-height of 3.60 m, only two 20.0 form-ties are needed, thanks to the 80 percent higher load capacity of the I tec 20 composite formwork beam compared to conventional H20 timber formwork beams the stiff FF20 tec walings WU14, with their welded-on plates Maximised utilisation of equipment and ease of handling Lowers commiss ...

Mass of falling parts: 1000 kg Ram stroke: 800 mm Energy of full blow: 3600kgm Quantity of stroke: 110 Mass of hammer: 35t Year of production: 1974r.

Manufacturer: Yale Type: MS15X Type: High-lift truck Load force: 1500 kg Mast: standard Battery: Hoppecke, 24V, 375Ah lifting height: 2768 mm free stroke: 100 mm Gabellaenge: 1160 mm fork width: 570 mm fork thickness: 65 mm fork rail width: 675 mm Number of tyres front: 2 Number of tyres rear: 2 Ideal for the following applications: Operating cycles and multi-shift operation; storage equipment in low or medium-high and high shelving systems; Cooling House Applications -30 oC. Ergonomics 5-point wheel rest and fixed stabilizing wheels provide increased stability and greater safety when cornering. Without mounting gear and fork

S 400 elite S 32 professional format circular saw Trimming length 3200 mm max. cutting height 138/98 mm 90/45 with scribble max. saw blade diameter 400 mm Speed Main saw blade 4000/5000 rpm Engine power 7 kW 9.5 hp 400 V 50 Hz Prescribing 0.55 kW/0.75 hp Upper protective hood Suction nozzle diameter 120 mm Weight 715 kg G&STÜ-5504842 Option: Angular cutting device with grid division G&STÜ-5510403

Thank you for your interest on our machines, we like this may offer you: Manufacturer: Sandeep Singh Model: KSF 800 marzipan & nougat transformer Year of construction: 1977 Working width: 800 mm Capacity: á 20mm - article 8 g - 180 kg /. Electr. Values: 230/400 V, 50 Hz Details: - with 17 different form rollers (!) -Suitable for large production volumes -Plastic rollers with steel core -Stepless speed control -with prior extruder and feed conveyor -For Marzipan and nougat mass We offer this machine "as available" without any warranty/warranty claims or representations for sale. from stock Hess. Lichtenau; bulk

- Hand & foot operation - integrated anvils - massive substructure - Hammer weight: 25 kg - Stroke: 250 rpm - Lifting height: 250 mm - Extension: 200 mm - Cylinder: 125 mm - Work shoehe: 765 mm - Engine power: 3 kW - Voltage: 400 V - Ground WxHxD: 460 x 1520 x 970 mm - Weight: approx. 670 kg

Ram stroke: 750 mm Energy of full blow: 1840 kgm Quantity of stroke: 120 u/min Mass of anvil block: 12,5 t Mass of hammer with anvil block: 21,9 t

Many thanks for your interest on our Drop Rollers for hard candy, please find follow our offer: Type : Candy roller/ Drop Roller for Hard Candy, hand driven roller size. : approx 58mm x 177 mm Packing dimensions : approx. 630 x 580 x 450 mm (lxwxh) (wooden box suitable for export) Net Weight : approx. 65 kg. Gross weight : approx. 95 kg. Different: with one set brass drop roll round/egg shape without structure, round 300 other types possible. For every roll you decide for size, or you can give us your own form, Also available machine with working table, electrical engine and gear box. We offer this machine in as-is where it is condition delivery time: According to the arrangement ex warehouse Hess. Lichtenau

Used chamber filter press / filter press Rittershaus & Blecher / R & B 1500 x 1500 Plate size: 1500x1500mm Cake thickness: 30 mm Chamber number: 118 units Filter pressure: 15 bar Closing pressure: min. 300 bar / max. 400 bar Expiration: closed Plate material: PP

Format sliding table: 3200mm Engine power: 400V 5.5 KW (7.5hp) Cutting height: 125mm Saw blade: 300-400mm swivel: 90-45 electrically pivotable and height-adjustable Industrial scoring unit for 120mm scoring saw blade Parallel cutting width: 1500mm

Max. capacity 1000 tons Slide stroke 240 mm Shut-height (max.) 650 mm Wedge adjustment 10 mm Number of slide strokes 100 rp

Year 1996, CE norm, complete instructions, control Delem, machine in TOP condition with warranty, more details on request

FOD ovens, such as autoclaves, run batch processes and are the ideal solution for the sterilization of all those production lines in which the variability of products, batches and formats do not allow the use of continuous sterilizers such as tunnels. FOD ovens main advantage lies on its particle contamination class assurance. Fedegari guarantees the contamination level to remain under the established standards values for 100 class. This accuracy is verified also during the most critical phases such as heating and cooling, when the thermal expansion of the filters may release a great amount of particles. Particulate contamination control originates from complex fluid dynamic studies and a close collaboration with Camfil, the world’s most respected filter manufacturer, with whom Fedegari works at the development of high-temperature filters. DESIGN & TECHNICAL FEATURES • Sterilizing c ...

Plant: second-hand mobile Chamber filter press Type: Rittershaus & Baldwin AEHIS 1200 Year of construction: 1991 Filter plates sizes: 1200 x 1200 mm Number of plates: filter plates: PP Thickness: Expiration: closed Filter cloths: optionally available in voting on the medium Filter surface: approx. m ² Presses contents: approx. 3000 dm3 Filter pressure: 15 PSI Closing pressure: approx. 380-410 bar Plate transport: automatically Hydraulic power pack: Condition good Cylinder: no leaks, Rod blank-good condition Eccentric screw pump: as before priming pump Eccentric pump: EH2 type Bornemann 1900 Piston diaphragm pump: a pump Piston diaphragm pump: Type SP535N, Emmerich Wear parts: piston diaphragm pump replaced (proof of purchase. E installation: 2007 full service check (proof of purchase. Electrical connection: 125 amp input. Electrical connection: various outputs for external devices i ...

Campagnolo Packaging Systems Vertical form and seal machine Model: C25 Serial:A02-02

Can make meatballs and burgers up to 130mm in diameter. and height up to 30 mm; – The height can be adjusted; – Equipped with a speed controller; – Limit switch for more tape security; – Motor: 0.3 kW – Single-phase motor – Hopper capacity 24 l. Standard shapes: Round burgers with diameter: 22 mm. 32 mm. 40 mm. 65 mm. 100 mm. 115 mm. 130 mm. Round meatballs with diameter: 22 mm. 32 mm. 40 mm. 65 mm. Depending on the chosen thickness, a different weight of the final product can be achieved with one mold. Accessories: As standard, the machine comes with one mold. As an option, you can also order: Round burgers with a diameter of: 22 mm. 32 mm. 40 mm. 65 mm. 100 mm. 115 mm. 130 mm. Round meatballs with diameter: 22 mm. 32 mm. 40 mm. 65 mm.

Cold Radial Forging Machine GFM SX-10 YOM: 1971/2024 CNC: Siemens SINUMERIK ONE with PLC 1500 Forging Box Number of forging hammers 4 Max. forging force per hammer 1250 kN Number of strokes 1200 1/min Hammer lenght 135 mm Diameter setting range 60 mm Forge eccentric 3,5 mm Chuck head Clamping force max. 50 kN Advance speed max. 20000 mm/min Stroke 1290 mm Workpiece rotation 35-71 1/min Workpiece lenght max. 900 mm Counter holder Clamping force max. 50 kN Advance speed max. 20000 mm/min Stroke 1290 mm Mandrel Clamping force max. 20 kN Advance speed max. 18000 mm/min Stroke 800 mm Dimensions Lenght approx. 9100 mm Width (with electrical cabinets an ...

Front forklift Caterpillar B12 Load capacity 6 t Mast height 3, 70 m Hours of operation 7.685 Max. Total weight 13.775kg

CNC Hot Radial Forging GFM SX-13 New in 1974 / 2022 New CNC Control SIEMENS SIMATIC Machine number: 1276 No. of Hammers: 4 Forging force each hummer: 160 Ton Hammer stroke / min: 700/min Hammer lenght: 240 mm Diameter setting range: 80 mm Maximum forging diameter: Structural steel, round-cross section: Ø 130 mm square cross section: Ø 115 mm Smallest dimensions forged: Ø 25 mm Manipulator A max. displacement: 6820 mm Manipulator B max. displacement: 7150 mm Maximum workpiece length: 6000 mm Rapid speed manipulator: 400mm/sec Total connected power: 300 kW 380 V, 50 Hz Machine dimensions: Forging height over floor: 615 mm Total height pf the machinr over floor: 16 ...

CNC Radial Forging Machine GFM mod. SXL-16 Manufacture: GFM (Austria) YOM: 1974 / 2022 Machine number: 1293 PLC: Siemens S7 - Technology V4.2 with CNC Bosch Rexroth XM Numbers of Hammers: 4 Forging force: 800 Ton (200 t per Hammer) Strokes per minute: 580 Hammer length: 320 mm Maximum hammer setting scope - calculated by diameter: 100 mm Maximum diameter of forging regarding: - structural steel: circular cross section – Ø 160 mm square cross section – 130 mm - high alloy steel: circular cross section – Ø 120 mm square cross section – 100 mm Extreme quadrangle: 12 x 120 mm Maximum length of forging: 6000 mm Min and Max diameter of mounting in manipulator: 30 - 160 mm Feed of manipulator A: 6800 mm Feed of manipu ...

Radial Forging Machine GFM SXL-32 The main equipment includes: - Manipulator A - Manipulator B - GFM 32 forging machine - N° 2 loading and unloading clamps - Transport roller track Technical data: - No. of forging hammers: 4 - Forging pressure of each hammer: 500 Mp = 5,000 bar - N° of strokes for each hammer: 310 strokes/min - Rated power each forging motor: 2 x 250 kW - Hydraulic pump motor power: 100 kW - Loading - unloading pincers motor power: N° 2 x 37 kW - Hammer length: 480 mm - Maximum raw piece diameter: 320 mm - Max hammer adjustment area: 210 mm - Largest forging diameter: Non-alloyed and low-alloy construction steel: 320 mm/Ø ….. 290 mm/Ø Biggest clamping diameter in clamping head: 320 mm High and special-alloyed steels: smaller dimensions - Max workpiece length: 3000 mm - Rapid traverse spee ...