air cooled liquid used for sale

Electro-mechanical scale for liquids, with Hottinger load cell, pressure control valve, pneumatic outlet valve and solenoid valve. In support frame with feet.

Used storage container made of steel according to DIN 6616/2 in double-walled design (with test certificate), for above-ground storage, with fifth feet, 1 dome with PE blind lid, seal, screws and nuts (stainless steel). Container is expertly cleaned by us and equipped with an inner shell suitable for the storage of liquid fertilizer. Content: 30,000 litres Diameter: approx. 2,000 mm Length: approx. 9,940 mm Weight: approx. 5,500 kg On request, we can provide the container with a new exterior paint finish and equip it with a ladder with operating platform. Optional equipment for the storage of liquid fertilizer: • Vacuum leak detector • Protective box for holding the LWG • Basic fittings Liquid fertilizer consisting of filling, removal, venting and bearing pipe • Liquid fertilizer pump made of polyester 2" • Installation of the liquid fertilizer p ...

Used storage container made of steel according to DIN 6616/2 in double-walled design (with test certificate), for above-ground storage, with fifth feet, 1 dome with PE blind lid, seal, screws and nuts (stainless steel). Container is expertly cleaned by us and equipped with an inner shell suitable for the storage of liquid fertilizer. Content: 25,000 litres Diameter: approx. 2,000 mm Length: approx. 8,390 mm Weight: approx. 4,700 kg On request, we can provide the container with a new exterior paint finish and equip it with a ladder with operating platform. Optional equipment for the storage of liquid fertilizer: • Vacuum leak detector • Protective box for holding the LWG • Basic fittings Liquid fertilizer consisting of filling, removal, venting and bearing pipe • Liquid fertilizer pump made of polyester 2" • Installation of the liquid fertilizer p ...

Used storage container made of steel according to DIN 6616/2 in double-walled design (with test certificate), for above-ground storage, with fifth feet, 1 dome with PE blind lid, seal, screws and nuts (stainless steel). Container is expertly cleaned by us and equipped with an inner shell suitable for the storage of liquid fertilizer. Content: 20,000 litres Diameter: approx. 2,000 mm Length: approx. 6,840 mm Weight: approx. 4,000 kg On request, we can provide the container with a new exterior paint finish and equip it with a ladder with operating platform. Optional equipment for the storage of liquid fertilizer: • Vacuum leak detector • Protective box for holding the LWG • Basic fittings Liquid fertilizer consisting of filling, removal, venting and bearing pipe • Liquid fertilizer pump made of polyester 2" • Installation of the liquid fertilizer p ...

Storage tank storage tanks of liquid fertilizer AHL / ASL tank - containers - fertilizer warehouse 1. used storage containers AHL tank ASL tank liquid fertilizer tank 30,000 litres. The tank complies with the DIN of 6616, owns 2 caliper feet, is empty inside and out and cleaned, incl. ladder. D = 2.50 m - L = approx. 6.80 m. The container receives incl. leak detector in the protection box mounted a new plastic inner sleeve - resistant storage of liquid fertilizer -. The plastic inner sleeve has a "General Building Inspectorate approval" Z-65.30-466 and makes suitable and approved for the storage of liquid fertilizer AHL as well as NOx reduction agent AUS 32 (AdBlue). The price is ex-works - free charged.

Cabinet to store chemical /flammable liquids Justrite Model 25302 Year 2000 Dimensions Width=109cm Depth=45cm Height=114cm Capacity 113 liter Details With self closing doors Available direct

GRONINGER LIQUID FILLING LINE FILLING AND CLOSING MACHINE DFVK 6000 - STOPPERING MACHINE KVK 108B Anno di costruzione: 2002 Output: 12,000 per hour (200 per min), based on 3ml vial, 1ml fill Filling range: 0,2 ml- 135 ml (equipped with according pumps) Diameter range: 14-35 mm Height: 30-100 mm PLC: Siemens PLC type S7 300 Guarding: Stainless steel frame with safety glass The vial filling and closing line is capable of running in the following ways: - Fill and half-stopper a batch for freeze-drying - Overseal a stoppered batch from after freeze drying process - Fill, stopper and overseal a liquid batch Line under ORABS - Open Restricted Access Barrier System​. Full set of operation manuals and technical documentation. Various spare parts.

P187 - 3x used approx. 43 m³ / 43,000 litres polyester tank, GRP-tank, aboveground, vertically standing, flat floor, in good condition. technical details: capacity: approx. 43 m³ / 43,000 litres material: polyester tank / GRP tank manufacturer: Skoda dimensions: Ø approx. 3.00 m x height approx. 6.50 m Used tanks in good condition, by manufacturer Skoda. Upright standing storage tank with flat bottom, lid on the tank body, multiple connections, inlets and outlets. One tank is equipped with a propeller agitator on the side, functionality not yet tested by us. The container can be used as a storage tank for many different media such as water, liquid feed, fodder, whey, molasses, manure, seeping juice, rapeseed oil or as a rainwater collection tank etc. Price upon request. Transport can be arranged at low cost. It is not possible to update all our advertisem ...

Vials filler for inyectables with weight dosing filler and stoppering Output 3.000 vials/h Size range diameter 16 mm / max. 80 mm – height min. 55 mm / max. 200 mm The fill range is 1 up to 1.000 ml with 4 needles Electrical supply 220/380 V 50 Hz Weight 1350 Kg. The machine include a turning table and rabs

Monobloc filling and sealing machine incl. feeding turn table Filling range 5-30ml Container sizes D.20-35 - H.50-80mm Capacity max. 15-30 pcs. / min.

40m3 storage tank for AHL/ASL - steel tank used storage container 40,000 litres capacity for storage of liquid fertilizer / AHL / ASL with brand-new plastic inner shell The container corresponds to DIN 6616, has 2 saddle feet, an ascent ladder and is professionally emptied and cleaned inside. D = 2.50 m - L = approx. 8.70 m. The container receives a brand new plastic inner shell - resistant to the storage of liquid fertilizers - incl. leak warning device mounted in the protective box - see sample photo. The inner plastic sleeve has a "General Building Supervision Approval" and is therefore used for the storage of liquid fertilizer AHL nox reducing agent AUS 32 (AdBlue). The container is completely ground on the outside, re-primed and repainted in desired colour according to RAL. The price is ex works - freely charged. Delivery time = by arrangement.  ...

The machines and lines of the SFM series are designed for processing nested containers such disposable syringes. The dosing station is designed to process liquid products using rotary piston pumps. Depending on machine type and equipment, nests are supplied manually or fully automatically. Filling and closing are always fully automatic. The machines are also designed for vacuum-assisted dosing and insertion of plunger stoppers. This virtually eliminates entrapped air when filling disposable syringes with pharmaceutical product

The monoblock F87 is an automatic intermittent movement machine that can perform three operations at the same time: a volumetric filling and two closures. Aqueous, alcoholic, sugary, foamy, viscous products can be given. Droppers, glass or plastic pipettes, nebulizers, normal or freeze-drying rubber caps can be introduced. You can apply screw caps, press caps, ferrules, PFP etc. The carter and the machine table, on which all the operating groups are fixed from the inside, are in AISI 304 stainless steel and protect the mechanical parts from the infiltration of the treated products and the water used for washing. The operating units and their supports are made of AISI 304 stainless steel and receive their motion from a single variator motor, obtaining the dual purpose of relating, without interruption, the speed of the machine with the rotation speed of the screwing or seaming, and not to ...

The brand new container corresponds to DIN 6616, has 2 saddle feet, an ascent ladder and is primed on the outside - on untreated sheets. D = 2.50 m - L = approx. 10.70 m. The container receives a brand new plastic inner shell incl. leak warning device mounted in the protective box - see sample photo. The inner plastic sleeve has a "General Building Supervision Approval" and is therefore used for the storage of liquid fertilizer AHL nox reducing agent AUS 32 (AdBlue). The price is ex works - freely charged. We recommend: Above containers sandblasting from the outside, prime and completely repaint - iron grey / RAL hue. (On request, other RAL colours are also possible!) ASL (ammonium sulfate solution) is a sought-after liquid fertilizer used in drying plants during the drying of liquid fermentation residues and during exhaust air purification. ASL container  ...

Used SB Machines LZ1-CIP liquid filling line. New 2020. The line includes: 1. LZ1-CIP filling line – This machine is designed for the automatic filling of milk and other liquid products. For filling products with capacities of: 250 ml, 500 ml, 1 L 2. ECA-08 label applicator – for applying single labels to cylindrical containers such as bottles and plastic containers. The label applicator uses paper labels. Manufacturer: Świdnik Trade Year of manufacture: 2016 Power supply: 220/380V, 10A Capacity: 0 ± 6000 units/hour Container diameter: min. Ø 50mm; max. Ø 100mm 3. Automatic wrapping machine – The machine is designed to arrange bottles delivered by a conveyor into packs of 6 or 8 pieces (in two rows), then wrap them in heat-shrink film and move them to a shrink tunnel. Manufacturer: Drewmet s.c. Power supply: 400V, 50Hz Capacity: 0 ± 3000 pcs/h Package dia ...

Used storage tanks VARIBOX - 1.000 L - double-walled - with plug-in system and recesses for forklifts - Capacity: 1,000 L -Plastic - tested and cleaned - for diesel, oil or other liquids Discount possible for higher quantities. Inspection and shipping costs after consultation.

Since we have focused our -fischer organics- laboratory service more on peptides / HRMS, we would like to hand over our SFC. The system has the complete equipment, The original price in 2012 was over 250,000 euros net! - Mass detector QDa - Backing pump RE6 - Acquity PDA detector - Acquity Pillar Manager - Acquity Binary Pump 1000bar - Acquity Autosampler - Isocratic UPLC pump - Convergence Manager

1. LIQUID SPRAY BOOTH The spray booth is designed for ventilation and filtering of paint overspray during manual painting application. VENTILATION SYSTEM Side draft ventilation provides high efficiency during paint application. The filter wall is manufactured modularly from galvanized sheet metal panels and the extraction fan is placed on the upper part of the filter wall and choiceed with plastic propeller to prevent the risk of spark formation. The electric motor is placed outside the extraction duct and there is no direct contact of the motor with the polluted air. FILTRATION SYSTEM The extraction filter is on the back surface of the spray booth filter wall and is used in 2 stages with 99.9% efficiency. In order to increase filtration efficiency, cardboard filter and paint stopper fibreglass filter are used as 2 separate layers. The warning lamp on the control panel indicates th ...

1. LIQUID SPRAY BOOTH The spray booth is designed for ventilation and filtering of paint overspray during manual painting application. VENTILATION SYSTEM Side draft ventilation provides high efficiency during paint application. The filter wall is manufactured modularly from galvanized sheet metal panels and the extraction fan is placed on the upper part of the filter wall and choiceed with plastic propeller to prevent the risk of spark formation. The electric motor is placed outside the extraction duct and there is no direct contact of the motor with the polluted air. FILTRATION SYSTEM The extraction filter is on the back surface of the spray booth filter wall and is used in 2 stages with 99.9% efficiency. In order to increase filtration efficiency, cardboard filter and paint stopper fibreglass filter are used as 2 separate layers. The warning lamp on the control panel indicates th ...

Collecting pan, floor pan, collecting container, flat steel pan, collecting pan for coolant liquid -Collecting tray: for chips with coolant liquid, 1200 x 800 mm -Trough height: 400 mm, can be shortened -Rectangular cutout: 420 x 215 mm -Dimensions: 1200/800 / H400 mm -Weight: 10 kg

Refrigeration compressor, refrigeration machine, cooling compressor, refrigeration unit, cooling compressor, compressor, liquid receiver -Manufacturer: Klimal, liquid collector -Type: FM 0.88 (M16/M06) -Pressure: up to 28 bar -Contents: 0.88 liters -Dimensions: Ø 80 x 257 mm -Weight: 0.7 kg

Pressure gauge, flow meter, measurement and control technology, flow meter liquid -Manufacturer: SKT, flow meter for liquid / water -Measuring range: 100 to 1000 l/h -Accuracy class: 4 -Connection: DN 25 -Pmax: 10 bars -Dimensions: 60/60/H390 mm -Weight: 0.8 kg

Used Semi-Automatic Pneumatically Actuated Piston Filler for Liquid Media Filling volume max. approx. 1 L

Stainless steel, round steel, warehouse liquidation, 1.4104, X14CrMoS17, D150x1057mm, , new -50% Special price This stainless steel comes from a stock liquidation of a certified production company, so we offer an absolute special price. We have other diameters with this quality in stock. Buy a larger quantity we will still accommodate you in price. D 150mm x 1057mm lg, 147 kg, peeled. Material: X14CrMoS17 Material number: 1.4104 Condition: peeled The material was analysed using a hand-held spectrometer and is available from us. Material certificate is not available. A heat-treatable, martensitic, stainless free-cutting steel with 17 % chromium and molybdenum addition, which is alloyed with sulphur to improve machinability. The higher sulphur content reduces corrosion resistance and toughness. Not for cold forming and joint welding. 6 month warranty according to our gen ...

6- Digits series filler for liquids, brand new, never been in operation

2-Filler for liquids, manual filler

Ultimate sealing flexibility with dual impression

Important information on the auction and processing: Pick-up is only possible after prior written appointment. Only the item designated in the heading (only the machine) is for sale. Objects, attachments, tools, pallets, shelves or other materials visible in the photos are not part of the auction unless they are expressly mentioned in writing in the item description. All dimensions, weights, technical data and operating hours are approximate indications. No guarantee is given for correctness and completeness. Deviations are reserved. A forklift (1.6 t) is available by arrangement. There is no entitlement to free loading assistance, unless it is not time-consuming. In the event of extraordinary or disproportionate effort, we reserve the right to charge separately for any additional expenses incurred. The buyer is solely responsible for dismantling, loading and transporting. Mining is ...

Heating Module, Liquid Heating HELIOS 05080001 2,000 W 230 V Dimensions: 920 x 580 x 85 mm

Liquid filter ORSTA AC 40/1-25 TGL 21541 ND 250 bar New ! Dimensions: 400 x 170 x 165 mm

Liquid filter ORSTA ACC 40/1-25 TGL 21541 ND 25 bar New ! Dimensions: 400 x 160 x 170 mm

Liquid filter ORSTA AC 16/1-63 TGL 21541 ND 25 bar New ! Dimensions: 200 x 120 x 100 mm

Liquid filter ORSTA BCC 10/1-25 TGL 21541 ND 10 bar New ! Dimensions: 160 x 140 x 100 mm

Liquid filter ORSTA ACB 16/1-10 TGL 21541 ND 25 bar with electric clogging indicator TGL 15687 New ! Dimensions: 200 x 120 x 120 mm

Liquid filter, return filter, without maintenance indicator ORSTA BCC 16/1-25 ( BCC 16/1-25 ) TGL 21541 ND: 10 bar (1.0 MPa) for tank installation without rubber seal! New ! Dimensions: 205 x 145 x 105 mm

Liquid filter ORSTA BCD 10/1-25 TGL 21541 ND 10 bar with electric clogging indicator New ! Dimensions: 190 x 150 x 100 mm

Liquid filter ORSTA BCA 32/1-25 TGL 21541 ND 10 bar New ! Dimensions: 390 x 210 x 200 mm

Liquid filter ORSTA, FILTERBAU DESSAU ACC 20 x 25 TGL 21541 ND 25 bar New ! Dimensions: 210 x 145 x 120 mm

Liquid filter, with mechanical maintenance indicator ORSTA, FILTERBAU DESSAU BC25x63A TGL 21541 ND 10 bar New ! Dimensions: 290 x 160 x 150 mm

Liquid filter ORSTA, FILTERBAU DESSAU BCC20x63 TGL 21541 ND 10 bar New ! Dimensions: 230 x 160 x 150 mm

Liquid reservoir EFD Nordsen 615DT (presumably) - for liquids of different viscosities - uniform liquid pressure - prevents contamination and evaporation 1 liter max. 6.9 bar Dimensions: 260 x 190 x 190 mm

Machine name: Inversion system for liquid polymers Manufacturer: Reiflock Type: Reifomat 500 Year of Make: 1999 Conveying / Dosing of: Liquid Polymers Capacity: Polymer flow: 0.12 - 2.5 l/min. Water flow: 40 - 160 l/min. Dimensions: L 1000 x W 750 x H 1500 mm Curb weight: Approx. 120 kg 2Ygvwomvc Tech. Documentation: Yes Note: Achievable flocculant concentration: 0.07 – 2.5 % Electrical connection: 380 V / 16 A connected load: approx. 2.2 kW Condition: Used Price: On request

Volume: 2900kg/6400l, length: 6000mm, diameter: 1250mm, height: 1400mm, filling: liquid gas according to DIN 51622/EN589, max. filling level: 85%, test pressure: 22.3bar, max. permissible pressure: 15.6bar, permissible temperature min./max.: +20°C/40°C, storage: above ground. Including foundation plates (2400mm/1200mm/120mm) and steel frame. Documentation available. On-site inspection is possible.

Automatic liquid filling and capping system. Suitable for various liquids and oils from the food industry (water, juices, liqueurs, olive oil, sunflower oil, etc.) as well as from non-food (perfumes, cosmetic oils, detergents, etc.). The liquid filling system has 2 filling heads moving in vertical and horizontal direction, which allow continuous filling and thus a higher number of cycles. Automatic detection of the position of the bottles and of the neck diameter of the lid. The Advantage is less adjustment work and sensor settings (within a certain range) have to be carried out. The change to different bottle dimensions is considerably facilitated, which ultimately results in lower machine downtime due to the time savings. Easy adjustment to different bottle width and height without the need for additional format sets. After filling, the bottles are conveyed by a conveyor belt to the au ...

Fully automatic liquid filling machine with 8 filling heads for filling volumes of different alternative ranges: ONE of the following ranges can be choosen from: a.) 25-250, b.) 50-500 or c.) 100-1.000ml. Conveyor: adjustable speed control, MITSUBISHI touch screen, bottle mouth positioning system, filling heads moved down and up during filling process (foam products). - No-bottle-no-filling device, suitable for various liquids (cosmetics, perfumes, flower oil, liquor, etc.). Stable performance and accurat filling with cold and hot liquids. -Specifications: max. speed of the machine in neutral: 80 cycles/minute | stainless steel version | power supply: 220V | compressed air: 6bar: power consumption and consumption of compressed air depending on filling volume range - machines dimensions too. That machine/system is available in different versions for different packaging sizes and with diff ...

Fully automatic liquid filling machine with 6 filling heads for filling volumes of different alternative ranges e.g. 50-500ml ? customized configurations are possible. The volume is adjustable within the filling range by adaptation of the capacity of the air cylinder ? uncomplicated controlled by software, without using additional modules. Operating principle: feeding of the bottles via infeed conveyor, positioning of the bottles, feeding of the filling needles into the bottles, filling by filling lances, exact dosing controlled by air cylinders. Electronic components: PLC and Touchscreen by SIEMENS, optical sensors by Sick. Pneumatic parts predominantly by AIRTAC. CIP (cleaning in place system) is customizable via software and hardware. - Specifications: number of filling heads: 6 | max. speed of the machine in neutral: 35 cycles/minute | accuracy: depending on chosen filling range and  ...

Fully automatic liquid filling machine with 4 filling heads for filling volumes of different alternative ranges e.g. 50-500ml ? customized configurations are possible. The volume is adjustable within the filling range by adaptation of the capacity of the air cylinder ? uncomplicated controlled by software, without using additional modules. Operating principle: feeding of the bottles via infeed conveyor, positioning of the bottles, feeding of the filling needles into the bottles, filling by filling lances, exact dosing controlled by air cylinders. Electronic components: PLC and Touchscreen by SIEMENS, optical sensors by Sick. Pneumatic parts predominantly by AIRTAC. CIP (cleaning in place system) is customizable via software and hardware. - Specifications: Number of filling heads: 4 | max. speed of the machine in neutral: 26 cycles/minute | accuracy: depending on chosen filling range and  ...

Used line for pouring liquids by AMSY. New 2012, complete. Line composition: - pouring machine, - creasing machine (2 creasing machines, one for stoppers , the other for triggers). Capacity of the line for confectioning liquids, gels about 800 pcs/hour. PET, HDPE bottles capacity from 200 ml to 5 L (carboys). Full documentation.

SEVAL is a type of machinery often used in the packaging industry, particularly for filling sachets with a variety of products. Sachet fillers are designed to efficiently fill small, often single-use packets with goods such as powders, liquids, granules, or even solid items., Key Features of SEVAL Sachet Fillers:, - Versatility: SEVAL sachet fillers can handle different types of products, making them suitable for various industries including food, pharmaceuticals, cosmetics, and chemicals., - Automation: These machines are often semi-automatic or fully automatic, enhancing efficiency and reducing the need for manual labor. They can integrate with other packaging systems for a streamlined process., - Speed and Efficiency: SEVAL fillers are designed to operate at high speeds while maintaining accuracy in filling volumes. This is crucial for high-volume production settings., - Precision: Th ...

TOFFLON VIALS FILLING LINE The line can be adapted to different production modes and can be flexibly connected to lyophilization systems. --- 1) Tofflon Washing Machine FW03024 Year of manufacturing: 2019 Washing machine for vials. PRODUCTION: Filling range: 2-100 ml (ca) • Cleaning speed: 7ml-100VPM • Operation mode: servo drive OTHER CHARACTERISTICS • Size: 2,335 mm × 2,405 mm x 1,450 mm (ca) • Power (kW): 13-15 (ca) --- 2) Tofflon Tunnel, model FT0110 Year of manufacturing: 2019 For cleaning and filling vials. --- 3) Tofflon Filling and Stoppering Machine, model FF0204 Machine for filling and closing vials. --- 4) Tofflon Capping Machine, model FC0210 Year of manufacturing: 2019 For capping closed vials. PRODUCTION • Production range: 2-100ml • Production speed: 10ml-100VPM • Number of capping heads: 6 OTHER CHARACTE ...