air conditioner used for sale

This Krone EasyCut AM 283 disc mower is a robust and reliable machine for efficient mowing of grassland and forage crops. Thanks to Krone's proven EasyCut cutting system, this mower guarantees a clean cut, a smooth crop flow and a high capacity under a wide range of conditions. The machine has a working width of approximately 2.80 meters and is equipped with a heavy cutter bar with several cutting discs with freely rotating blades. The side suspension ensures that the mower follows the soil contours accurately, resulting in an even cut and limited contamination of the crop. The mower is equipped with a protective tarpaulin over the full working width and can be folded up compactly for transport. According to the nameplate, it is a Krone AM 283 CV. However, the machine is offered without a conditioner unit, which makes it function like a conventional disc mower. This makes the machine p ...

Ready to use in working condition. Auction-ID: A3-46192-17251

After cooking stove, thermal oil, Formcook, frying line (CFS, GEA, Koppens, Alco, Stork) - continuous grilling line - Total length outside: 6 m - Total width: approx. 1.300 mm - Height of the gallows: 1.200 mm - Gallows for chain hoist - 5 floors above each other - Conveyor belt of wire belt: 600 / 2,35 / 7 / 12,7 - Double-walled floor and hood, isolated

After cooking stove, thermal oil, Formcook, frying line (CFS, GEA, Koppens, Alco, Stork) - serial: Sprematec - length: approx. 10 m - width: 1350 mm inside / 1518 mm outdoor - heated thermal oil - year: 10/2003

mobile; equipped with digital readout; 230V Auction-ID: A1-46854-195

Screw Compressor WORTHINGTON - CREYSSENSAC Type Rollair 40 -- RLR 40BM6Fabr. No. 6240330200 built in 2003Volume flow rate 4.6 m3/min. Pressure capacity 10 barMotor power main motor 30 kWNe-connection 400 Volt, 50 HzConnection thread 1 1/2 inch- 36004 Switch-on hours read- 19256 load hours read- SoundproofedSpace requirement L x W x H 1850 x 1050 x 1760 mmWeight 910 kggood condition; used

Screw compressor KAESER type BS 50Fabr. No. 402852 built in 1990Volume flow 5 m³/min. Pressure capacity 7.5 barEngine power main motor 30 kWNet connection 400 volts, 50 HzConnection thread 1 1/2 inches- 1107.90Operating hours read- 749.00 load hours read- SoundproofSpace requirement L x W x H 1600 x 1070 x 1350 mmWeight 900 kgvery good conditionWas a reserve compressor and has only a few operating hours; used

Double diaphragm pump with air drive DEPA type DH40-FA-ZRTDreactive air diaphragm pump, double pumpSeries No.: B1802498 year of construction 09.05.2018Temperature: max. 130CBau size: 40Grain size: max. 16 mmSuction height: approx. 2 mSuction height product filled: approx. 9 mOperating pressure: max. 7 barAir connection: 3/8Suction connection: 1 1/2Pressure connection: 1 1/2- self-priming- Aluminium housing- Diaphragm plate made of stainless steel- Diaphragm made of nopped E4® PTFE- Balls made of PTFE- Ball seats made of stainless steelSpace required: L x W x H: 370 x

Double diaphragm pump with compressed air drive DEPA type DH50-FA-ZRTDoduct diaphragm pump, double pumpSeries No.: B1600416 year of construction 26.01.2016Temperature: max. 130CBausize: 50Grain size: max. 18 mmSuction height: approx. 2 mSuction height product filled: approx. 9 mOperating pressure: max. 7 barAir connection: 3/4Suction connection: 2Pressure connection: 2- self-priming- Aluminium housing- Diaphragm plate made of stainless steel- Diaphragm made of nopped E4® PTFE Composite balls made of PTFE- Ball seats made of stainless steelSpace required: L x W x H 550 x 350 x

Filter system, air conditioning unit, air conditioning, fan, ventilator, electric motor, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan, axial fan, axial fan, axial fan, axial fan -Filter unit (from an air conditioning system) -Manufacturer: Wolf -Type: KG Top 4040 -Power: Fan 4x 5.0 kW -Volume flow: 47000 m³/h -Dimensions: 2950/2800/H2800 mm -Weight: 1400 kg

Stock# UG6400 Used set of air compressor by Kaeser model FSG520-2W with air dryer by Hybritec type Compact model DTI 668/902. Compressor details: Power consumption: 355 kW Water cooled. Working output pressure up to 10 bar. Flow output: 50.00 m3/min Shipping dims: 3190 mm x 2095 mm x 2125 mm x weight 5900 kg Dryer details: Hybritec Compact model DTI 668/902. air flow - up to 66.7 m3/min Working pressure 5/10 bar Power consumption: 34.5 kW

Type: Oil-free piston compressor Model: Kaeser AIRBOX CENTRE 550 with integrated dryer & air receiver Rated power: 3 kW Air flow: 255 l/min Max. pressure: 10 bar Working hours: 2811 h (2533 h under load) YoM: 2014 Pump: Replaced with new unit in 2021 Last service: Kaeser C-Service on 06.10.2022 Maintenance: Regularly serviced Features: Integrated dryer, receiver tank, IE3 motor, refrigeration dryer (dew point +5 °C), oil-free operation Dimensions (D x W x H): 1730 x 820 x 1640 mm Weight: 550 kg ⚠️ Service manual not available. Please view the test video linked with the lot. Auction-ID: A7-48184-14

ATLAS COPCO GA 5 FF – Screw Compressor General data: Manufacturer: Atlas Copco Model: GA 5 FF Machine type: Screw compressor with integrated air dryer and air receiver Year of manufacture: 2003 Operating hours: approx. 38000 h Condition: Serviced by Atlas Copco Service history: Available Technical details: Rated power: 5.5 kW Working pressure: 8.5 bar Dimensions: Approx. 1200 x 800 x 2100 mm (including packaging) Description: Industrial screw compressor Atlas Copco GA 5 FF equipped with integrated air dryer and air receiver. Designed for reliable compressed air supply in workshop and industrial environments, offering efficient operation and compact design. Auction-ID: A7-48184-9

Price each for 1x large & 1x small. 2x 1 large & 1 small available. Viewing possible Auction-ID: A7-48388-8

Power supply: 220-230 V, 1-phase, Power: 0.40 kW, Refrigerant: R134a, Max. working pressure: 14 bar Auction-ID: A1-41278-519

Disassembled in working condition. Auction-ID: A3-46197-17176

Disassembled in working condition. Auction-ID: A3-46197-17177

Schneider Compressed Air Connector and Compressed Air Hose Bundle see pictures Auction-ID: A1-48530-2245

1 Іелю ULMAIR X200 L+ Air Purifier, Air Filter -Brand: ULMAIR - Color: White - Model: X200 L+ -Dimensions: approx. 490 x 980 x 1570 mm (LxWxH) -Weight: approx. 90 kg -Machine type: X200 L+ - Serial number: SN-X200-221205 -Year of construction: 2022 - Motor data: approx. 780 watts - Current consumption: max. approx. 13.5 Amp -Voltage: 230VAC 50/60HZ -Degree of protection: IP20 -5-stage filtration -Air filter capacity: up to approx. 3,000 m³/h -Thermal technology for virus inactivation -Removes viruses, bacteria, pollen and odors -Sturdy metal housing with castors and optional feet -Made in Germany -Condition: Customer return, used, small scratches present, no other visible defects or damage, was plugged into the socket and works - Int. Art.Nr.: MGH_MMR62503-2 - Optional shipping possible Auction-ID: A1-48605-74

Water cooler, ruck cooler GEA, 400-600KW.with radial fan, suitable for air duct as heating or to blow into the open.

Material: steel Engine 11 kW Very good condition. You can also get the entire system with all components.

Air-cooled liquefaction kit Bitzer without compressor,Type LH135/F302H, New, Base plate with condenser and collector

Air pressure-done piston pump aerial entrance pressure max. 8 cash Max Materialvolumenstrom Materialvolumenstrom materialvolumenstrom 4.5 l / min. translation 30:1 224 cash material temperature max. 90°C high-grade steel execution (changes and mistakes in the technical data, information and prices as well as intersales reserve!)

Air dryer Mobile for 17-24 Nqm/h 219W.

Full stainless steel heat exchanger in round shape. Previous use: heating air with steam. Suitable for heating or cooling aggressive gases/air.

Blacksmith hammer / air hammer Zeva machines 16 bear Air / forging hammer 16 bear Max 250 strokes/min Working cylinder diameter 90 mm Stroke approx. 170 mm CLOUT approx. 16 bear Anvil is connected to machine Ambosswerzeug can be changed CLOUT and Geschwindegkeit can be controlled with foot switch and hand 1.5 KW, 250 kg If you are interested in air hammers with 25Baer, 40Baer, 55Baer and 75Baer write me a short message!

Various varieties in stock

Ready to ship

Biological exhaust air purifier for odour removal, exhaust air treatment, bio-air purifiers, biofilters, air scrubbers used The exhaust air filter can be used for odour disposal in wastewater treatment, waste management, oil mills and malthouses, biogas plants, landfill degassing, carcass recycling plants and slaughterhouses. The exhaust air is first passed through an air scrubber / humidifier and then through the biofilter material. There, the unened odours are neutralized. Manufacturer S&H GmbH & Co. Umweltengineering KG Year of construction probably 2006 Dimensions: approx. 10.5 m x 10.5 m + 2.5 x 5 m Surface filter 9 x 9 m (internal dimension) Filter material: 149 m3 biomix and 24 m3 oak wood Bulk height 2.14 m The side walls are made of PE panels with support made of galvanized steel. The filter was installed in a biogas plant. We also have other components of the s ...

Attachment: Schneider air compressor Compressor: UNM STV 460-10-200 t no.: T800-140 Suction power: 460 l / min EFF. Quantity: 375 l / min Final compression pressure: 10 bar Rated motor power: 3 kW Voltage: 400 v Frequency: 50 Hz Year of construction: 2008 Condition: mint condition - very good

Air starter Part no. 218006

Dynamic airflow separator (sifter) for minerals, cement, recycling etc., rotor diameter: 700 mm, turbine wheel occupied with 64 blades / turbine blades, outer ring occupied with 36 manually adjustable counter wings, incl. drive. In very good condition.

Stationary air compressor Lutos DI 70-4 Oil-free Efficiency 3100 rpm 90 kW Weight 410 kg Ask for an offer iNTER-WiBA Sp.J. UL. Krakowska 263 PL 43-305 Bielsko-Biała USt-IdNr.: PL547-17-47-669 Tel. 0048/33 812 58 60 fax. 0048/33 812 58 36 abc.inter-wiba.com.pl info@inter-wiba.com.pl

Make : Wolf Type: WLE-S-180 Built: 1993 Dimensions: 1.3 m x 2.2 m x 2.6 m (approx. WxLxH) Heating unit: 209 kW Burner : Gas burner Dry temperature: max. 80 degrees C Circulating air unit: 14,000 m3/h; 7.5 kW; 1435 rpm Location : Camp Herzogenaurach Sales price: € 2,990,- net, from location This plant is already on sale, similar we have in stock. We have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please contact us, tel. 0171-9508841.

All prices are from Station Germany. All follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical data are owner, manufacturer or operator information and therefore non-binding for us. Customer protection is agreed between the parties. Place of jurisdiction Germany. All agreements are made in accordance with German law. Customer protection agreed after ICC Paris Intermediate sale, other use, exploitation and error are expressly reserved.

Cover for charge air cooler MWM 620 RECON Part number: 1214 1951 Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us

RECON Part number: 1203-1208 / 1213 6626 / 1230 6642 / 1213 6625 Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us

Stock number U1984-2 Used impact dryer for pellet by RIETER (Germany) model AERO 500 in stainless steel design (material 1.4541, AISI 321). Dryer is equipped with air blower providing 90 m3/min and driven by electric motor with power 18.5 kW. Dryer has reported output 4000 kg/h of outgoing product. Flow rate of water with pellet: 35 m3/h (maximal), 25 m3/h (nominal) and 20 m3/h (minimal). Nowadays machine has installed screens with mesh 1.2 mm. Machine new 1997. Shipping dimensions of dryer: width 1400 mm x length 3830 mm x height 2265 mm. Weight of machine – 700 kg. Body of drying chamber is sound-muffled. Technical documentation included in german language. Machine had been working on PP pellet.

RECON Part number: 1203-1212 / 1213 6618 / 1230 6640 Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us

Air heater Manufacturer: GEA Happel Klimatechnik GmbH Type: MAXX M311D. BA3. X ATYPE Year of construction: 2004 Technical data: Rated voltage: 3 x 400 / 50 V/Hz Nominal power: 0.30/0.17/0.12 A Protection class: IP54

High-quality airpad machine from a reputable manufacturer. Suitable for the production of individually defined air-filled protective and filling elements made of PA and PE film. Usually, four air cushions are created per work cycle. Different formats can be produced. For this purpose, 10 programs are available for storing several parameters. By calling up the corresponding program in the display, air cushions from 4 cm to 16 cm in length and individually defined filling levels can be produced. The resulting air cushion membranes are wound into rolls by means of a motorized device. When the roll is full, the machine automatically shuts down. Then the finished roll can be removed manually and then used as packaging material. The machine can be pushed over rollers and fixed by brakes. The machine can be demonstrated under electricity.

RECON Part number: 0405 2476 / 0400 6154 Complete with air start valve Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us

Starter air Ingerssol overtaken edge

Original MTU Charge air radiator cooler for MTU diesel engine type 16V2000G26F (3B)

Air duct MWM 12307524 Original - Price per air duct! - Suitable for MWM TCG 2020 - TBD 620 - TBG 620 - AIR GUIDANCE CONDUITE D'AIR CONDUCTO DE AIRE The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new proj ...

RECON Part number: 0215 4064 / 0400 5112 / 0400 3113 Air start ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

Air duct MWM 12307522 Original - Price per air duct! - Suitable for MWM TCG 2020 - TBD 620 - TBG 620 - AIR GUIDANCE CONDUITE D'AIR CONDUCTO DE AIRE The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new proj ...

- Air guide housing air duct housing MWM 12141695 - Suitable for several motors - Please note! Price per piece! - 12141695 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapti ...

Original Charge air radiator cooler for MTU diesel engine type 16V2000G25 (3B)