132,187 used machines on RESALE, but how to find them? Machine Search
Here, 40 feet of containers of Super High Cube DBCL40HCW with 1-2 sea routes 90.1 cubic meters volume will be auctioned. Due to the special internal dimensions, especially the interior height of about 3 meters, these containers are suitable as a storage area, but also ideal as a basis for a tiny house. These containers are also often used as a caravan or motorhome storage place, and classic cars also find the ideal place in them. There are also manufacturers who offer round roofs for containers to build an entire storage area and park your fleet in the middle. Also, some storage boxes/self-storage were built with these containers, where many craftsmen and self-employed people rent to store their material and tools, planning and execution can be asked. Please observe these neutralization obligations before submitting a bid • The buyer or buyers are obliged to return the container(s) w ...
Here, 40 feet of containers of Super High Cube DBCL40HCW with 1-2 sea routes 90.1 cubic meters volume will be auctioned. Due to the special internal dimensions, especially the interior height of about 3 meters, these containers are suitable as a storage area, but also ideal as a basis for a tiny house. These containers are also often used as a caravan or motorhome storage place, and classic cars also find the ideal place in them. There are also manufacturers who offer round roofs for containers to build an entire storage area and park your fleet in the middle. Also, some storage boxes/self-storage were built with these containers, where many craftsmen and self-employed people rent to store their material and tools, planning and execution can be asked. Please observe these neutralization obligations before submitting a bid • The buyer or buyers are obliged to return the container(s) w ...
We offer, in the current state, ex site Fruit juice concentrate plant Was used for apple and sour cherry Manufacturer: Unipektin Year of Make: 1990 Type: Case Film Intake: 23,000 kg/h Water evaporation: 10,000 kg/h Only pre-evaporator with aroma column Machines are dismantled Subject to prior sale
Transnorm curved belt conveyor left bend 90°-800-700 IR900 RA2117 Technical data: Manufacturer: Transnorm Condition: good (used) conveying angle: 90° nominal/external width (NB): 800 mm belt width (GB): 700 mm innerradius (IR): 900 mm overall height (BH): 210 mm motor height (MH): 450 mm Motor type: SEW gear motor, SA37/T DT71D4/TH Electrical Data: 380-500 V, 0,37 kW Conveying speed: 0,67 m/s Scope of delivery: without supports (if required, please contact us) Optional: supports Side guides Frequency converter for stepless speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 2014 condition: very good (used) Nominal / inner radius in mm: 900 Nominal / outside width in mm: 800 Belt width in mm: 700 angle: 90° Driven: YES Running direction: LINKS Engine type: SEW Eurodrive KW: 0,37/S1 Conveyor speed m / s: 0,67 scope of ...
Unaudited Auction-ID: A7-46327-152
Drive rolls, return rolls, conveyor belts, belt curves various dimensions RA2010 Various drive rollers and idlers for conveyor belts and belt curves in different lengths, angles and diameters Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics
Key data: 1000 mm, 500 mm, 500 mm
Machine Details Stock-No. 1105-04036 Type of machine Machining Center - Vertical Make BRIDGEPORT Type vmc 1000/22 Year of manufacture 2000 Type of control CNC Storage location FRANCE Country of origin UK Delivery time immediately Freight basis ex stock HAGUENAU FRANCE Price 14500 EUROS Technical details X-Travel 1000 mm Y-Travel 510 mm Z-Travel 600 mm control HEIDENAHAIN TNC 430 table surface area 1150 x 490 mm Rapid Traverse 30/30/30 m/min turning speed range 12000 rpm power capacity - milling spindle 13 kW No. of tools in the magazine 30 Stück Additional information CNC HEIDENHAIN TNC 430 Synchronised tappin - boxway system 3 axis - RS-232 interface WITH CHIP CONVOYER
ID3445 Landbanden/Country conveyor belts - Land conveyor system with belt and roof, galvanized, 100 m long, 650 mm belt width -Land conveyor system with belt and roof, galvanized, 25 m long, 650 mm belt width - Land conveyor system 140 m long, 650 mm wide, without belt, without drive, steel construction only, with roof -Land belt system with belt and roof, galvanized, 100 m long, 650 mm belt width -Land belt system with belt and roof, galvanized, 25 m long, 650 mm belt width - Land belt system 140 m long, 650 mm wide, without belt, without drive, only steel construction, with roofing
Key data: 750 mm, 600 mm, 520 mm
Machine Details Stock-No. 1105-04037 Type of machine Universal Milling Machine Make LID MAHO DMG Type DMU 70eVolution Year of manufacture 2002 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Germany Delivery time according to the arrangement Freight basis ex Works Price 45000 EUROS Technical details X-Travel 750 mm Y-Travel 600 mm Z-Travel 520 mm Control HEIDENHAIN iTNC 530 Additional information Milling Machine - Universal DECKEL MAHO DMG DMU 70eVolution NC swiveling rotary table (700x500) Spindle -------------------- Spindle speed: 18,000rpm Tool holder: SK40 Tool Changer -------------------- Magazine places: 32 Pick up domestic equipments -------------------- sample Chip Conveyor 2nd processor card electronic handwheel HR410 INTERFACE FOR EROWA WITH EROWA ROBOTS RENISHAW SAMPLE Flushing gun
Table Size 1700 x 710 mm Headstock Travel 810 mm (Z-axis) Height of the machine 4000 mm Table longitudinal displacement 1600 mm (X-axis) Table transverse travel 910 mm (Y-axis) Spindle to tabletop 150 - 960 mm Distance from the floor to the table 1150 mm Distance between spindle center and column front 825 mm T - Groove No. 5 T - Groove Size 18 mm T - Groove Pitch 125 Max. load on the table 2000 kg Spindle cone BT-40 Hourly spindle speed 6000 rpm Footprint (L x W) 4300 x 3400 mm Weight of the basic machine 14500 kg Total connected load 40 kVA (basic standard machine), 50 kVA (basic standard machine with high power
Key data: 630 mm, 560 mm, 560 mm
Machine Details Stock-No. 1105-04038 Type of machine Universal Milling Machine Make DECKEL-MAHO Type DMU 60 MONOBLOCK Year of manufacture 2008 Type of control CNC Storage location HAGUENAU Country of origin Germany Delivery time immediately Freight basis EX WORK Technical details X-Travel 630 mm Y-Travel 560 mm Additional information CNC Univ. Tool Milling Machine DECKEL MAHO Model DMU 60 MONOBLOCK YEAR OF MANUFACTURE 2008 5 AXIS SIMULTAN CNC Universal Tool Room Milling Machine DECKEL MAHO type DMU 60 MONOBLOCK BUILT IN 2008 With CNC control Heidenhain TNC 530, 32-fold tool changer, ROUND TABLE 360000 ° , Cabin With CNC control Heidenhain TNC 530 , 33-fold automatic tool changer, , cabinl Technische Daten / technical details: Longitudinal travel X / X-travel longitudinal 730 mm Cross travel Y / Y-travel cross 560 mm Vertical travel Z / Z-travel vertica ...
"The BMV60+ redefines the standards for precision machining! The rigid structure, small footprint and precise spindle ensure consistently high quality of performance. The high speed and feed rate meet the criteria necessary for cost-effective processing." "The arm tool magazine uses variable pocket coding. Linear guideways, variable speed AC spindle drives, and a digital drive CNC system are some of the standout features of this BMV60+ series machining center." Unique features: Rigid column technology Modular construction CAE-based optimal structural design for thermal stability "T20 - 20 Tools Roof/Carousel Magazine Carousel Magazine Designed to adapt to different types of coolant and chip systems High-quality spindle on precision bearings eliminates vibration during heavy cutsModel BMV-60 Travel of the X-Y-Z axis 1050 x 610 x 610 mm Spindle performanc ...
Interroll angled-belt conveyor 30° 1525-950-840 RA2327 new Make: Interroll Year of manufacture: 2022 Inlet angle: 30 Length: 800mm shortest length at angle starting, total length 2250 mm Belt width (RB): 840 mm ( 90 mm each ) Frame height: 160 mm Nominal/external width (NB): 950 mm, 1250 with motor average conveying speed: 0,76 m/s, with frequency converter stepples controllable Motor drive: Sew Movi Mot V 230/400, kW 0,75 Overall height side wall: 150 mm Optionally available: Supports All prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: angle: 30° scope of delivery: including side guides without supports, inklusive Frequenzumrichter KW: 0,75/S1 condition: new Antrieb: SEW Getriebemotor mit MOVIMOT Electric data: 0,75 kW, 400 Optional erhältlich: Füße Construction year: 2022 Conveying length in mm (NL): 1525 Frame width in mm (NB): 950 ...
curved belt conveyor curved belt 60° right Transnorm TS 1600-140 v2 Technical details: Manufacturer: Transnorm Type: curved belt 60° right Year 2018 Direction: Right Width: 900 mm Nominal radius: 1100 mm Please ask without support, if needed Drive: SEW geared motor location: inside pulling Features: Construction year: 2018 condition: as good as new (used) Nominal / inner radius in mm: 1100 Belt width in mm: 900 angle: 60° Driven: YES Running direction: RIGHT Engine type: SEW Eurodrive scope of delivery: without supports and side guides Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ans ...
Daikin ERQ200A7W1B Condensing unit Serial: 8008515 2020, condensing unit, Gas R410A, 3Ph
Cap conveyor, feeding system, closure conveyor, closure conveyor system, dosing container, crown corker, screw caps. 4 chambers. Conveyor bunker silo for crown corks screw caps conveyor conveying system, 4 chambers, cabins, boxes.
Transnorm belt curve conveyor left GKF 90°-800-600-IR400 - Exhibit RA2318 Technical data: Frame width (NB): 800 mm Frame width with Bearing cover and motor: 1000 mm belt width (GuB): 600 mm height (BH): 200 mm height with motor (MH): 350 mm Inner radius (IR): 400 mm Conveying angle: 90° degrees Conveying speed (v m/s): 0,38-1,14 m/s Drive: Nord gear Motor with Frequency converter for stepples speed controll Electrical data: 50Hz V380-500, kW 0,37 / S1 Year of construction: 2020 Incl. 2 supports, current height 810mm Optionally available: Support, if deviating from the currently installed Sideguides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, Gattingerstreet 11 B & C, 97076 Würzburg Features: Construction year: 2020 condition: Ausstellungsstück Nominal / inner radius in mm: 400 Nominal / outside width in mm: 800 Belt width in mm: 600 angle: 90° Driven: YES R ...
Here, 40 feet of containers of Super High Cube DBCL40HCW with 1-2 sea routes 90.1 cubic meters volume will be auctioned. Due to the special internal dimensions, especially the interior height of about 3 meters, these containers are suitable as a storage area, but also ideal as a basis for a tiny house. These containers are also often used as a caravan or motorhome storage place, and classic cars also find the ideal place in them. There are also manufacturers who offer round roofs for containers to build an entire storage area and park your fleet in the middle. Also, some storage boxes/self-storage were built with these containers, where many craftsmen and self-employed people rent to store their material and tools, planning and execution can be asked. Please observe these neutralization obligations before submitting a bid • The buyer or buyers are obliged to return the container(s) w ...
Transnorm belt curve conveyor left GKF 180°-800-700-IR200 - Exhibition machine RA2317 Technical data: Frame width (NB): 800 mm, 2000 mm Diameter Frame width with Bearing cover and motor: 2200 mm Diameter belt width (GuB): 700 mm height (BH): 200 mm height with motor (MH): 350 mm Inner radius (IR): 200 mm Conveying angle: 180° degrees Conveying speed (v m/s): 0,38-1,14 m/s Drive: Nord gear Motor with Frequency converter for stepples speed controll Electrical data: 50Hz V380-500, kW 0,37 / S1 Year of construction: 2020 Incl. support, current height 820mm Optionally available: Supports, if deviating from the current height Sideguides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, Gattingerstreet 11 B & C, 97076 Würzburg Features: Construction year: 2020 condition: Ausstellungsstück Nominal / inner radius in mm: 200 Nominal / outside width in mm: 800 Belt width in ...
Transnorm belt curve conveyor right GKF 90°-1300-1100-IR900 -- NEW RA2332 Technical data: Frame width (NB): 1300 mm Frame width with Bearing cover: 1400 mm Frame width with Bearing cover and gearbox (MB): 1500 mm belt width (GuB): 1100 mm height (BH): 160 mm height motor below: 360 mm height including motor (MH): 520 mm Inner radius (IR): 900 mm Conveying angle: 90° degrees middler conveying speed (v m/s): 1,5m/s Drive: SEW motor motor with frequency converter Electrical data: 50Hz V380-500, kW 2.2 / S1 Belt: KT 96 new Year of construction: 2021 Optionally available: Supports Sideguides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2021 condition: new Nominal / inner radius in mm: 900 Nominal / outside width in mm: 1300 Belt width in mm: 1100 angle: 90° Driven: YES Running direction: RIGHT Engine type: SEW Eurodrive ...
Here, 40 feet of containers of Super High Cube DBCL40HCW with 1-2 sea routes 90.1 cubic meters volume will be auctioned. Due to the special internal dimensions, especially the interior height of about 3 meters, these containers are suitable as a storage area, but also ideal as a basis for a tiny house. These containers are also often used as a caravan or motorhome storage place, and classic cars also find the ideal place in them. There are also manufacturers who offer round roofs for containers to build an entire storage area and park your fleet in the middle. Also, some storage boxes/self-storage were built with these containers, where many craftsmen and self-employed people rent to store their material and tools, planning and execution can be asked. Please observe these neutralization obligations before submitting a bid • The buyer or buyers are obliged to return the container(s) w ...
Transnorm spiral helix belt curve conveyor left 90°-1300-1100 IR900 - Showroom machine RA2319 Technical data: Frame width (NB): 1300 mm,1450 mm with Motor belt width (GuB): 1100 mm height (BH): 210 mm Inner radius (IR): 900 mm Conveying angle: 90° degrees decline: 500 mm / 90° = 2000 mm / 360° support feet: optionally available Conveying speed (v m/s): 0,8 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0.75 / S1 Belt: double layer, green, smooth, KT36 (wear see pictures) Year of construction: 2020 Incl. supports, current height from 300mm to 800mm Optionally available: adjustable up and down with frequency converter Supports, if deviating from the currently installed Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: condition: good (used) scope of delivery: without supports and side guides Driven: Y ...
Transnorm inclined roller conveyor 2355-980-640 - Showroom machine RA2316 Make: Transnorm Roller width (RB): 640 mm Nominal/outer width (NB): 980 mm Length: 2355 mm Diameter rollers: 50 mm Distance between rollers: 55 mm Roller conveyor motor: SEW drive motor frame height: 210 410 mm side guide with 200mm belt conveyor included Conveyor speed: freely adjustable with frequency converter Incl. supports, curent height 800mm Optionally available: Supports, if deviating from the current ones MFE52 Ethernet frequency inverter control unit Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, Gattingerstraße 11 B & C, 97076 Würzburg, Germany Features: Construction year: 2017 condition: Ausstellungsstück nominal voltage: 380-500V angle: 13,4° Conveying length in mm: 2355 Nominal / outside width in mm: 980 Roll width in mm: 640 Roll division in mm: 55 Driven: YES Engine type: 2 ...
Consists of control cabinet No. 1- 1-3 No. 2 - 4-6 No. 3 - 7
BVI / ThyssenKrupp Condensing steam turbine MARC6-C03 2005 power generator with 135,000 operating hours, without steam condenser and AC generator. Inlet pressure 89 bar, outlet pressure 0.11 bar, 21,000 KWel x 1,500 rpm, Steam turbine BVI / ThyssenKrupp MARC6-C03 Manufacturer: BVI / ThyssenKrupp Model No.: MARC6-C03 Type: Steam Condensation Serial number: P-900078 Power [KW]: 23,545 Pressure Input [bar]: 89 Temperature Input [°C]: 520 Pressure output [bar]: 0.11 Year of Make: 2005 Hours: 135,000 Weight [kg]: 58,000 Dimensions LxWxH [cm]: 510x400x340
Transnorm Rising falling Incline belt conveyor with leading belt GF 4600+3300-600-600 RA2202 Technical data: Conveyor length (NL): 7900 mm ( 4600 mm riser segment + 3300 mm forerun) frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor, Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1998 condition: good (used) Conveying length in mm: 7900 ( 4600 + 3300 ) Nominal / outside wid ...
Transnorm Belt conveyor 3200-500-400 RA2335 Manufacturer: Transnorm Type: TS 1200 belt conveyor Year of manufacture: 1995 Condition: good (used) Motor: fully functional conveyor length (FL): 3200 mm nominal / external width (NB): 500 mm belt width (GB): 400 mm overall height (BH): 65 mm motor height (MH): 450 mm Motor type: SEW gear motor Motor power: kW 0.37 220-240V Conveyor speed: 0.175 m/s, Drive: head drive Delivery: without supports (if needed please ask) Optional: supports Side guides Frequency converter for stepless speed control Price plus VAT central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 1995 condition: good (used) Conveying length in mm: 3200 Nominal / outside width in mm: 500 Belt width in mm: 400 Driven: YES Engine type: SEW Eurodrive KW: 0,37/S1 Ampere: 2,10 Conveyor speed m / s: 0,175 scope of delivery: without supports and side ...
incl. various copper electrodes Reference: Schönichen - Lot 87 Auction-ID: A7-46763-294
Kannegiesser inclined belt conveyor Hopper Filling Funnel GF 2750-470-380 RA1311 This belt conveyor is from the year 2015 and is in good (used) condition. Additionally this conveyor is equipped with a height adjustment and can therefore also be used as an inclined conveyor. Due to the 2-layer PVC belt, the transported goods can be transported at a height of 260 mm up to a height of 750 mm. Due to a constant conveying speed of 0.3 m/s you benefit from a continuous material flow in your intralogistics. Technical data: Conveying length (NL): 2750 mm Framework width (NB): approx. 470 mm belt width (GuB): 380 mm Height / Belt run (BH): from 260 mm to 750 mm rising +/- 50 mm height adjustment Number of support feet: 2 pieces, movable on fixed rollers Load (kg/rm): 30 kg Conveying speed (v m/s): 0.3 m/s constant Drive: TM 113i drum motor Electrical data: 400 V / 50 Hz / 0.3 kW Deflection drum ...
Transnorm curved belt conveyor left bend 90°-1400-1200 IR2500 RA2334 Technical data: Manufacturer: Transnorm Condition: good (used) conveying angle: 90° nominal/external width (NB): 1400 mm belt width (GB): 1200 mm innerradius (IR): 2500 mm overall height (BH): 260 mm motor height (MH): 450 mm Motor type: SEW gear motor Electrical Data: 380-500 V, 0,55 kW Conveying speed: contact us for an individual convoying speed Scope of delivery: without supports (if required, please contact us) Optional: supports Side guides Frequency converter for stepless speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 2020 condition: new Nominal / inner radius in mm: 2500 Nominal / outside width in mm: 1400 Belt width in mm: 1200 angle: 90° Driven: YES Running direction: LINKS Engine type: SEW Eurodrive KW: 0,55/S1 Conveyor speed m / s: ...
Manual operation. Excl. content. Auction-ID: A3-43528-8403
Transnorm Rising falling Incline belt conveyor with leading belt GF 25000+4000-1000-900 RA2288 Technical data: Conveyor length (NL): 29000 mm ( 25000 mm riser segment + 4000 mm forerun) frame width (NB): 1000 mm, 1100 mm with motor belt width (GuB): 900 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): 0,2 Drive: SEW gear motor, Electrical data: 50Hz V380-500, kW2,2 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1998 condition: good (used) Conveying length in mm: 29000 ( 25000 + 4000 ) Nominal / outside widt ...
Key data: 750 mm, 600525 mm
Machine Details Stock-No. 1105-04039 Type of machine Machining Center - Universal Make DMG Type DMU 70 EVOLUTION LINEAR Year of manufacture 2008 Type of control CNC Storage location FRANCE Country of origin GERMANY Delivery time IMMEDIATELY Freight basis EX WORKS Technical details X-Travel 750 mm Y-Travel 600 mm Z-Travel 520 mm revolutions per minute 18000 rpm spindle taper ISO SK 40 control HEINDENHAIN ITNC 530 chip conveyor YES kW total power requirement 50 kW weight of the machine approx. 11 t Additional information VERY NICE MACHINE COOLING TRONG THE SPINDEL 40 BAR HP CHIP CONVOYER HSK 63 MAGASIN 120 TOOLS CTXS TROUGHT THE SPINDLE 40 BARS
With contents, various drills Auction-ID: A1-46480-3041
Transnorm conveyor belt GF 29750-900-800 RA2215 Technical data: Conveyor length (NL): 29750 mm frame width (NB): 900 mm, 1000 mm with motor belt width (GuB): 800 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor, SA47/T DT80 N4 Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2001 condition: good (used) Conveying length in mm: 29750 Nominal / outside width in mm: 900 Belt width in mm: 800 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,75/S1 Conveyor sp ...
Key data: 635 mm, 510 mm, 460 mm
Machine Details Stock-No. 1105-04041 Type of machine Machining Center - Vertical Make LID MAHO DMG Type DMC 635 V Year of manufacture 2006 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Germany Delivery time IMMEDIATELY Freight basis EX WORK Price Technical details X-Travel 635 mm Y-Travel 510 mm Z-Travel 460 mm table-size 790 x 560 mm spindle taper ISO SK 40 turning speed range 12000 1/min feeds longditudinal/cross/vertical 1 - 30000 mm/min Rapid motion -longitudinal/cross/vertical 30 m/min No. of Tools in Magazine 20 workpiece diameter at full load 80 mm wotkpiece diameter with 2 vacant positions 140 mm Workpiece length 300 mm Weight of tools max. 7 kg table load 600 kg spindle drive 9 / 11 kW control HEIDENHAIN TNC 530I total power requirement 30 kVA Additional information cnc HEIDENHAIN I TNC 530 MAGSIN POSITIONS 32 SK 40 El ...
maximum number of results exceeded
please refine your search
2.200 € 
