131,601 used machines on RESALE, but how to find them? Machine Search
SEW Movitrac Frequenzumrichter 31C011-503-4-00 RA1284 Hersteller: SEW Eurodrive Typ: Movitrac 31C011-503-4-00 Zustand: gebraucht/ geprüft/ voll funktionsfähig Version: 011-503-4-00 Preis: zzgl. MwSt. ab Zentrallager Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features:
SCM machining centre model RECORD 220 : - Useful axis stroke 3250 x 1300 x 300 mm - workpiece useful passage 320 mm - 3180 x 1250 mm multifunctional worktop - 3+3 reference stops for pendulum machining - Becker vacuum pump of 250 mc/h - Centralized automatic lubrication - NUM 1040 electronic control, with Alphacam software - machine according to CE standards, with bumpers and perimeter protections - year of production 1998 - Machine weight kg 8100 Operating units: - vertical electrospindle with inverter 900 – 18,000 rpm, ISO30 connection, with 4th VECTOR rotary axis, served by an on-board tool changer 10-position (RAPID 10) - drilling unit with vertical axis with independent control and encoder, and with 39 spindles as follows: 15 vertical spindles on X-axis 14 vertical spindles on Y-axis 2+2 horizontal spindles on X-axis 3+3 horizontal spindle ...
Slipform paver- GOMACO GOMACO Commander III Concrete Road Paver For track construction, walkway, formwork, etc. Year of construction 2004 6800 h Workshop-Refurbished Screed as good as new Price from Saxony-Anhalt Net/export price 130.000,-- Euro
- Used hydraulic power unit complete with control cabinet. - Ready to connect and ready to use. - E.g. for servo hydraulics use. - Litre capacity: 138 L/min. - Nominal pressure: Pmax 280 bar. - Electrical supply: 132 kW / 50 Hz / 400 V. - Incl. comprehensive and maintained components (see pictures). - Aggregate rental possible. - Other power units and hydraulic components available on request (sale/rental).
Wartsila L32 Connecting rods 8 Pcs available from stock From our Istanbul stock Reports available Tested for cracks and ovality In good condition
Italian made Mario Croci & Figli Concrete pipe machine. In great condition (the machine is new and it has never produced a single pipe). It is weather protected, placed in a dry warehouse. It produces 2 and 2.5m length pipes of D30 up to D120cm diameter. It comes with D300, D400, D500, D600 moulds along with rings. Located in Drama-Greece. Excellent bargain!
System for pressure increase or constant pressure maintenance, e.g. for the fresh water inlet of bottle washers 1.5 m³ stainless steel tank with frequency-controlled pump (see pictures for performance) Level control
Interroll roller conveyor falling conveyor 720-490-420 RA1982 Brand: Interroll Roller width (RB): 420 mm Nominal/outer width (NB): 490 mm length: 720 mm Diameter rollers: 50 mm roller distance: 90 mm Roller conveyor drive: Interroll Drum motor Conveying speed: Freely adjustable with Interrroll controller Frame height: 115 mm Optionally available: Supports Side guide on one side and on both sides Not the right one for you? On our website you will find more articles or simply contact us. Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 2015 condition: very good (used) Conveying length in mm: 720 Nominal / outside width in mm: 490 Roll width in mm: 420 Roll division in mm: 90 Driven: YES For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement ...
Aluminium Z conveyor belt incl. mobile substructure Horizontal range 800mm (customizable) Rising range 2,000mm (customizable) 2. Horizontal range 800mm (customizable) Angle in the bend variable, infinitely adjustable Feed height: horizontal (individual) Discharge height individually adjustable Conveyor belt width 600mm (customizable) We supply our conveyor belts in PVC, PU, felt or rubber. PU conveyor belt incl. cleats and corrugated edge Drive: Motor 0.55KW ( customizable ), speed approx. 0.3m/sec Connection 220/240V, 50Hz protection class IP54 Drive etc. ready for connection, motor control optional 8x adjustable machine feet for alignment Scalloped edge: 50x25mm T-50 Cleat - 400mm pitch 2-layer particularly transversely stable The delivery time of an individual system is currently approx. 3-4 weeks, depending on the production effort. Our core competence lies ...
Lifting device for 200-litre containers Manufacturer: Carnitech Type L 125 Dimensions 1300 x 1500 x 4050 mm Power 3 x 400 V, 50 Hz, 0.75 kW With slide for liquid products
ALBERTI 5-axis machining center model POLAR EVOLUTION 3.5 CN: – maximum working range 3500 x 1637 mm – Z-axis stroke 600 mm, thickness machinable on suction cups 160 mm – 2 phenolic resin worktops of 1700 x 1632 mm: for alternating or synchronous machining "vacuum free" type, with holes connected to the vacuum system, NC-controlled zero points and retractable stops, with 12 blocks of suction cups with double vacuum chamber (without hose) Becker vacuum pump + pneumatic clamps for small parts – Automatic lubrication, optimised and centralised suction – electronic control with TPA and ALBATROS software, visualization program in Windows environment, EDI32-TPA EDITOR (CAD-CAM 3D) – machine in compliance with CE standards, with double front concealed barrier (for loading/unloading of the 2 worktops) and perimeter protections – machine dimensions w ...
Key data: 1020 mm, 610 mm, 610 mm
Control Heidenhain ... TNC 530 Clamping table surface ... 1200x600mm Axis X ... 1020mm Axis Y ... 610mm Axis Z ... 610mm Spindle speed ... 10-12000 rpm Controlled axes... 3 cooling ... 20bar SK 40 Max. workpiece weight ... 500kg Main engine power ... 22kW Rapid traverse ... 40,40,36m/min Magazine spaces ... 30 Machine weight ... 6970kg L x W x H ... 2920x2820x2860mm The machine is in good condition, possible to test under power.
Power trowel, concrete trowel, screed trowel, concrete troweling machine, power trowel -Manufacturer: Noggerath, Hand-operated concrete power trowel type G 850 E -Power: 2.4/1.5 kW / 2820/1425 rpm -Plate diameter: 900 mm -Transport dimensions: 1550/1000/H1130 mm -Weight: 88 kg
Conveyor system, TGW, NB 420mm, approx. 1,100m, – used - Ex-site price (net): now only 99.000.-€ instead of 269.000.-€ dismantled, packed and loaded, incl. control, feet etc.! Manufacturer: TGW Year of Make: 2016 Condition: good Available: immediately Location: Niedernberg warehouse Here is an excerpt from Hall 2: approx. 42 pieces Type: KRC KingDrive Roller Conveyor A and T Nominal width (NB) 420mm Roll pitch: 110mm Zone length: 990mm Number of KDR's per zone: 2 pieces Type Roller: Steel Conveying speed: different e.g.: .0.47m/s, Acceleration / deceleration: 1.5 m/s In different versions As above only approx. 38 pieces Type: KRC KingDrive Roller Conveyor A and T Zone length: 660mm As above only approx. 4 pieces Type: KRC KingDrive Roller Conveyor A and T Zone length: 880mm 800mm = approx. 8 pieces 770mm = approx. 3 pieces 412.5mm = appr ...
Key data: 1400 mm, 1200 mm, 1350 mm
A horizontal machining center from the manufacturer Mori Seiki NH 8000 DCG is offered here. The machine is in good condition and can be visited. Make: Mori Seiki Huzvdlw Type: NH 8000 DCG Year of Make: 2008 Control: Fanuc MSX-701III Specifications: Travel: X-axis 1400 mm Y-axis 1200 mm Z-axis 1350 mm B-axis rotary table 360x0.001° automaton. Tool changer with 60 tool positions Tool holder HSK 100 2-fold pallet changing system Pallet dimensions 800 mm x 800 mm max. tool length 800 mm max. tool weight 30 kg Spindle power 37 KW Max. spindle speed 8000rpm. IKZ cooling system
Used and stored control cabinet, 200 cm wide, 60 cm deep, 220 cm high. 9 pieces Danfoss FU Frequenum Converter, Siemens S7 CPU PLC, Simatic OP17 Touch Panel. Location Castrop-Rauxel. Used and put into storage electric control cabinet, 200 cm x 60 x 220. 9 pieces Danfoss FU frequency converter, Siemens S7 CPU SPS, Simatic OP17 Touch Panel. .
Conveyor belt length 1,350 mm Conveyor belt width 100 mm Web spacing 30 mm, web height 5 mm Conveyor belt made of white plastic, as good as new Adjustable inclination 1 speed Dust compartment Mobile Drive 400V/50Hz
Key data: 1050 mm, 540 mm, 510 mm
Machine Details Stock-No. 1105-04012 Type of machine Machining Center - Vertical Make DOOSAN DAEWOO Type DN 500 Year of manufacture 2008 Type of control CNC Storage location HAGUENAU FRANCE Country of origin KORREA Delivery time IMMEDIATELY Freight basis Ex works Technical details longitudinal 1020 mm cross 540 mm vertical 510 mm Tool Changer 30 Pos. max. tool length 300 mm max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm Rapid Traverse 36 m/min weight of the machine approx. 7 t power capacity at 100 % load 11 kW power capacity at 40 % load 18 kW turning speed range 12000 1/min tool taper SK 40 table surface area 1200 x 500 mm groove width 18 mm Number of noches 4 St. Additional information direct measuring system, El. handwheel, internal coolant supply package (chipconveyor, cooling trought the spindle, 12,000rpm spindle) fanuc SERIES ...
Conveyor belt length 1,350 mm Conveyor belt width 100 mm Web spacing 30 mm, web height 5 mm Conveyor belt made of white plastic, as good as new Adjustable inclination 1 speed Dust compartment Mobile Drive 400V/50Hz
Flatbed panel and panel machining center equipped with three, four or five CNC axes. These CNC machines are suitable for the processing of solid wood panels – HPL – laminate boards such as FUNDERMAX® – chipboard – MDF boards – plastic boards (e.g. – PVC / PE) – synthetic resin boards and other boards and panels that can be tensioned by vacuum. The machines of the PLANUS series are offered with two different clamping options. - In version 1 - the material tension is done by vacuum on a synthetic resin plate - in version 2 - the material tension is also carried out by vacuum, but the suction blocks are located on tensioner bridges that can be moved lengthwise. Drilling – milling – sawing, all with one machine. The machines can be configured according to the customer's requirements. - Milling spindle drive power 11 kW to 18 kW - Tool holder in the SK30/SK40 ...
Year of construction: 2009 CNC controller: Siemens 840D-Powerline Axes X-axis travel mm: 800 Y-axis travel mm: 800 Z-axis travel mm: 800 C-axis degrees: 360º (0,001) B-axis degrees: 0-190º Feed rates m/min: 60 Rapid traverse m/min: 60 Milling/turning table nc: Number of pallets: 2 Table dimensions mm: Ø800x630 Max. workpiece weight kg: 1000 Table rotation speed rpm: 8000 max. torque Nm: 980 Spindle Spindle speed rpm: 10000 Spindle drive power kW: 44/32(40%ED/cont) Spindle torque Nm: 288/187 Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 980 Tool system Tool holder: HSK-A 100 Tool magazine slots: 180 Chip-to-chip time s: 4.5 Equipment Electronic Handwheel Chip conveyor Infrared probe Rinsing gun Operating mode 4 blowing air through spindle center selectable via M-function Signal lamp 3D quickSET ...
CONTAINER 70 m² layout, 4x containers, residential containers, office year 2015 - 4x (6 m x 3 m wide x 2.85 m high) office container - Entire apartment, 3x room, 2x toilet, 1x shower, kitchen - Price applies to all containers / complete price - Disassembly and loading can be supported - Pick-up near Hamburg, Construction Year 2015
Key data: 350 mm, 550 mm, 510 mm
Year of construction 07-2017 Mazatrol Smooth X Control Travel range: X-axis: 350 mm Y-axis: 550 mm Z-axis: 510 mm Swivel range A-axis -120° / +30° C-axis swivel range ±360° Max. spindle speed 12,000 rpm Tool magazine with 30 tool positions SK-40, DIN69871 Maximum workpiece height 350 mm Max. distance from spindle nose to top edge of table (horizontal) 560 mm Min. distance spindle nose to top edge of table (horizontal) 50 mm Max. distance spindle nose to table center (vertical) 550 mm Min. distance spindle nose to table center (vertical) 40 mm Max. table load 200 kg Air Blow Out Milling Spindle Maza-Check Mazak Monitoring B, Renishaw RMP 600 High-pressure coolant through the spindle, 15 bar Synchronized Tapping 5-axis simultaneous machining Preparation of chip conveyor, ejection left (without chip conveyor) Height 2,840 mm Width 1,900 mm Length 3,060 mm ...
Key data: 800 , 400 , 400
CNC controller: Yasnac Axes X-axis travel mm: 800 Y-axis travel mm: 400 Z-axis travel mm: 400 Rapid traverse m/min: 36 Worktable Table dimensions mm: 800 x 400 Spindle Spindle speed rpm: 10.000 Tool system Tool holder: BT-40 Tool magazine slots: 20 Equipment Chip conveyor High pressure pump Rated power kVA: 58 Basic machine dimensions / weight Length mm: 2.355 Width mm: 3.447
Key data: 650 , 500 , 450
CNC controller: FANUC Professional 3 Axes X-axis travel mm: 650 Y-axis travel mm: 500 Z-axis travel mm: 450 Distance spindle nose - table surface mm: 150 - 600 Worktable Table dimensions mm: 1.000 x 450 Max. workpiece weight kg: 400 Spindle Spindle speed rpm: 12.000 Spindle drive power kW: 18/22 Tool system Tool holder: ISO 40 Tool magazine slots: 20 Equipment Chip conveyor various rigid tools High pressure pump Basic machine dimensions / weight Length mm: 2.355 Width mm: 3.447
used
Grain conveyor belts capacity 150 t/h, belt width 650 mm, MZN 650, galvanized, also for hall filling 2 pieces 60 meters, stationary 1 drum motor each 2 pieces 60 meters revisable LEFT 7 RIGHT, 2 drum motors each, 2 displacement drives, IPE 200 mm rails, trailing cable 1 piece 30 meters, with drum motor 2 pieces 20 meters, with drum motor 1 piece 26.6 meters with regulating gear motor 15 KW, was receiving conveyor with many rollers 2 pcs 5 meter drum motor 2 pieces 7.5 meter drum motor Pictures are welcome to be sent. Dismantled, immediately available. Tel. 01715213204
Key data: 1 mm, 510 mm, 460 mm
Mazak FJV-250 (2PC) Built in 1999 Mazatrol PC Fusion 640 M Control X: 1,020 mm Y: 510 mm Z: 460 mm Table size: 1,200 x 500 mm Milling spindle drive power: 22 kW Max. speed: 12,000 rpm SK-40 Tool magazine with 30 tool positions 2-fold pallet changer 4th axle, Hofmann RWNX-160 with counter holder Mazak Monitoring B, Renishaw OMP60 Probe Cooling by the spindle High-pressure pump, 15 bar Conveyor Zero-point clamping plate
Seiger SLZ 1200 x 3000 heavy lathe with Siemens cycle control Seiger, type SLZ 1200 x 3000.The machine is equipped with a Siemens Sinumerik cycle control (teach-in). Version with AC main drive, face plate, 2x chip conveyor, hydraulic power unit and separate control cabinet. Documentation and tool holders available. Machine without tailstock. Viewing and test run under voltage possible by appointment. Working range Center width: 3000 mm Circulation diameter over bed: 1200 mm Rotation diameter over face slide: 850 mm Travel distance face slide: 620 mm Bed width: 750 mm Spindle head: DIN 55027 Size 11 Spindle diameter front bearing: 190 mm Spindle bore: 104 mm Speed range: 5 – 900 min⁻¹ Max. torque: 6000 Nm Main drive Drive power: 37 / 52 kW (100 % / 60 % ED) Feed X-feed force: 24,000 N Z-feed force: 16,000 N Rapid traverse X: 7 m/min Rapid traverse Z: 4 m/min Tool holder Turning ...
Complete Sterile Tank Unit with PLC and Aseptic Valve Cluster High-quality sterile tank unit designed for hygienic storage and handling of liquid food products such as milk, juice, and similar beverages. The system includes a fully automatic aseptic valve cluster with PLC control and HMI, ensuring reliable operation and integration into modern aseptic processing lines. Main Tank Specifications - Tank Product Capacity: 12,740 liters (12.74 m³) - Working Capacity: 10,850 liters (10.85 m³) - Water Capacity: 662 liters - Maximum Pressure: 3.5 bar - Minimum Pressure: -1.0 bar - Test Pressure: 5.8 bar - Maximum Temperature: 145 °C Technical Data Materials - Product contact parts: 1.4404 stainless steel - Cooling jacket and legs: 1.4301 stainless steel Design Parameters - Design Pressure: +3.5 bar ÷ -1 bar - Design Temperature: 145 °C - Total Capacity: 12.74 m³ ...
Code: 0377 Brand: COLOMBO R Model: PCA.S Automatic continuous-cycle hot-pressing line for the production of panels, furniture, doors, paneling, sandwich panels, and various Sturdy supporting structure Composition: 4-roll gluing machine OMMA- Width 1400 mm Disc transfer conveyor Preparation table Press COLOMBO 5500 x 1400 mm - n° 8 pistons - diameter 150 Solid steel platen Top-down pressing Pressure 4 kg/cm² Automatic unloading with photocell devices Work surface height 800 mm Closing times are reduced to 1–2 seconds and opening times to 2–3 seconds Overall dimensions press mm 5960 x 1900 x 2320 h Complete line length 22 mt Installation of the line does not require any foundation
VHS chain conveyors RA1845 Type: VHS chain conveyor 4340-480-410 Length: FL = 4340 mm Chain distance: (AK) = 410 mm Total width: 480 mm height (BH): 120 mm Scope of delivery 1x4340 mm chain conveyors Optionally available: Supports Side guide one and on both sides frequency inverter Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: KW: 0,37/S1 Engine type: SEW Eurodrive Frame width in mm (NB): 480 Electric data: 220-240, 380-415 Kettenabstand: 410 Bauhöhe in mm (BH): 120 Conveying length in mm (NL): 4340 For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics
Key data: 1 mm, 530 mm, 510 mm
1 pc Vertical CNC Machining Center MAZAK Model VCN-530C Year of construction 2017 Mazatrol SmoothG Control Travel: X-axis: 1,050 mm Y-axis: 530 mm Z-axis: 510 mm Table: 1,300 mm x 550 mm Max. table load 1,200 kg Max. spindle speed 18,000 rpm Tool magazine with 40 tool positions SK-40, DIN69871 Rapid traverse X/Y/Z 42 m/min Distance between table top and spindle nose 150 mm – 660 mm Distance between the top of the stand and the spindle centerline 586 mm Cooling by the spindle Direct Encoder System - Glass Scales Tool length measurement Mazak Monitoring System B, incl. Renishaw OMP60 probe Chip conveyor, ejection left, Mayfran Cover rinse High pressure pump, 15 bar CE mark Documentation
used
Table clamping surface: 750 x 450 mm Travel x/y/z: 600/400/600 mm Spindle mount: SK 40 ISA small/large distance table/spindle: 90/690 mm Spindle speeds: 50 - 8000 rpm Number of tool locations: 24 pieces electr. Connection: 380 V, approx. 15 kVA kW Space requirement: 2500 x 2500 x 2800 mm Weight: 3200 kg
According to photos, weight estimated Auction-ID: A1-45666-31
Key data: 600 mm, 770 mm, 805 mm
Siemens Sinumerik 840D sl 2 pallets, 2-fold pallet changer Pallet size: 400 x 400 mm Travel: X: 600 mm Y: 770 mm Z: 805 mm Swivel table A-axis Rotary table with pallet clamping system coarse (B-axis, PW) Milling spindle HSK-A63 Milling spindle drive power: 32/25Kw Max. torque: 206 Nm Max. spindle speed: 16,000 rpm Grob Spindle Diagnosis GSD Tool magazine with 90 tool positions Tool cleaning device Tool length measurement Renishaw Workpiece Measurement, RMP60 Machine condition light Pallet set-up station, can be rotated by hand Set-up door, additional control panel Preparation of hydraulic workpiece clamping system Swivel Axis Calibration GSC Energy Efficiency Package EED Hand-operated handset HAT 8 Sinumerik MDynamics technology package – milling Coolant Package Premium - Scraper belt chip conveyor, discharge height 1,100 mm - Filter system -Tank - High-pr ...
Control cabinet for Kettner palletizers, pallet and crate transport incl. Simatic TIA control
Automatic scale with ejector and roller transport max 40 kg for various max 300mm wide containers
maximum number of results exceeded
please refine your search
10 € 
