air con used for sale

Technical data: - Galvanized version with collection container + hydraulically operated lifting roof - Load up to 35 t - Volume of double-walled collection container 2000 l - Distance between running track and roof / lateral opening height 1500 mm - Max. interior height 2300 mm - Connection 400 V - Space requirement approx. L 7100 x W 3300 x H 3050 mm - Weight approx. 7000 kg - from warehouse D - 14943 Luckenwalde

Vertical Cylindrical Conical Bottomed Fermenter. Stainless Steel. - Second Hand 2500L / 25HL - Brim Full Capacity Top entry manway doors. Cooling Jackets, insulation and cladding, with two cooling zones on cone and tank wall. Fully Welded Cladding in stainless, insulated 50mm. Sample tap & temp probe pocket. Bottom outlet with 1.5" RJT Male Valve. Manufactured Approximately 2015. Total Height: 3330mm - 3100mm - depending on which tank. OD: 1750mm - 1650mm - depending on which tank. For more information and more available stock please visit us at - advancedbrewing.co.uk

Vertical Cylindrical Conical Bottomed Fermenter. Stainless Steel. - Second Hand 2500L / 25HL - Brim Full Capacity Top entry manway doors. Cooling Jackets, insulation and cladding, with two cooling zones on cone and tank wall. Fully Welded Cladding in stainless, insulated 50mm. Sample tap & temp probe pocket. Bottom outlet with 1.5" RJT Male Valve. Manufactured Approximately 2015. Total Height: 3330mm - 3100mm - depending on which tank. OD: 1750mm - 1650mm - depending on which tank. For more information and more available stock please visit us at - advancedbrewing.co.uk

KITZINGER contino 250BS1 bucket washing system, still in original packaging, System structure:, 1. 2000mm inlet table, wash material transport via scan belt chain with cams every 500mm, fixed pass-through height 400mm height (hold-down device adjustable with M6 threaded rods), bottom partially open with space for 1 E2 container as dirt trap, horizontal pass-through opening downwards, self-draining bucket bottom, 2. Washing 1000mm long, tank 400l with large outer filter housing, EDUR stainless steel circulation pump 4kW 1500l/min at 1.5bar, heating 20kW steam directly with Spirax Sarco mixing nozzle, 3. Rinse with fresh water, hourly requirement 300-400l (adjustable), length 800mm, including steam countercurrent, Inlet table 2000 mm Washing 1000 mm Rinsing 800 mm Neutral area 500 mm Blow-off 1800 mm Outlet 2000 mm Total length 8100 mm, KITZINGER contino 250BS1 bucket washing system, pump  ...

Bottle washing machine O + H Contina type E44C / 302-110 year of manufacturing: 1995 capacity approx. 30.000 bph incl. Siemens S7 PLC control system incl. HMI touch panel incl. fully automatic bottle transport system incl. integrated safety systems and emergency stop incl. electrical control cabinet The machine is made of stainless steel and it is suitabble for returnable glass bottles. The machine is still in production until November 2026 in Germany.

Interface converter, converter module, FL Comserver, interface converter, interface converter, interface converter -Manufacturer: Phoenix Contact, Interface converter, original packaging -Type: PSM-EG-RS232/TTY-P/2K Ord.-No. 27 61 253 -Quantity: 1x Converter available -Cardboard dimensions: 120/90/H70 mm -Weight: 0.3 kg

CNC control, control cards, MC3 control, plug-in cards, printed circuit boards, electronics housing -Manufacturer: Krauss Maffei, control module from injection molding machine -Electronic module: HU 100 5089750 3AO63 -Electronic housing: phoenix contact type UEGM -Number: 14x module available -Dimensions: 90/25/H85 mm -Weight: 0.1 kg/pc.

Conveyor belt No.01 Dimensions (L × W): 5 m × 0.70 m Conveyor belt No.02 Dimensions (L × W): 6 m × 0.70 m

3 x Conveyor belt

GTO Control 4000 A VDM7 Coutry o Orgin CH Order number 4501090751 Pictures to follow

GTO Control 4000 A VDM7 Order number 4501090751 A9BAD409291 Pictures to follow

Belt width: 650 mm, Flip-over: 90 - 200 mm, Power: 3 x 400V, 50Hz, 0.5kW, Dimensions: 2100 x 1300 x 1450 mm

A combined sanitary container unit, consisting of two containers, presumably of the Czech make Moravia Containers or Containex, is available. Container exterior dimensions X/Y/Z: approx. 6060mm/2440mm/2840mm, interior height: 2500mm, protective primer: epoxy, insulation: mineral wool, floor traffic load: 2500N/m², exterior sheet metal thickness: 0.5mm, corrugation depth: 10mm, urinal: 6, cubicles: 6, washbasins: 5, electric heating convectors: 2, under-sink units: 5. The unit is designed for simple and quick disassembly and reassembly. The two containers must be separated during transport. Documentation available. An on-site inspection is possible.

7 pieces telescopic belt conveyor, MAXX REACH, 27m total length - used - : Price per piece ex location: only 18.950.-€ (net), incl. loading! Price when buying 3 pieces: only 16.950.-€ / piece (net) ex location! Price for complete acceptance: only 15.950.-€ / piece (net) ex location! Manufacturer: FMH CONVEYORS INT. LTD. Model: MAXX REACH Type: MR3185-800 Year of Make: 2019 Serial number: e.g. W190103-02-03 According to the manufacturer, up to approx. 27m total length extended Length retracted: 8.80m I.e. the device extends about 18m! Body width: approx. 1.20m Total width approx. 1.53m plus motor on the side approx. 20cm 3-fold telescope Ideal for unloading trailers – the device can then also be located about 5 – 6m away from the unloading gate, i.e. a forklift can still drive in front of it when retracted, etc.! Height: approx. 1.22m Total weight: 6. ...

New feeding conveyors for lines. Length and width according to the customer's request.

System Overview Each line consists of one gravity roller conveyor, one gravity acceptance piece, and one chain conveyor. The system is designed to transport pallets linearly by gravity over a defined gradient using braking rollers. All components feature a robust sheet steel construction with galvanically zinc-plated carrying rollers. Height adjustment is provided via threaded spindles (M20). The maintenance-friendly design ensures continuous operation and easy replacement of individual assemblies. 1. Gravity Roller Conveyor ( 6 pieces ) Transports goods linearly over a defined gradient on carrying rollers. Features premium braking rollers with a three-stage planetary gear for progressive braking and extremely smooth start-up. - Conveyor width FB: 926 mm - - Total width GB: 1066 mm - - Conveyor length FL: 3600 mm - - Parking space length SL: 1200 mm - - Inlet height EH: 320 mm - - Ou ...

Made in sturdy painted carbon steel or AISI 304 stainless steel, drained or covered,.. Customized to your project, just send us your sketch with length, inner and outer diameter, drive, configuration or share your project with us and we will offer you the best solution.

Description Item # 8085 – MINI CONBAR FORMING ROLLERS Manufactured by SOLLICH Mini-Conbar Forming Rollers, Year 2014, in excellent like new working condition, very little use. Including Paper Reel Feeder, 1st Roller is 280mms wide x 320mms diameter, 2nd Roller is 320mms wide x 480mms diameter. Also includes a SOLLICH FKL-S 15 Chiller Unit, Year 2014, supplying cold water to the drums for cooling.

max. workpiece length: 4500,6000 mm profile spindle: 4 Stück main drive: 30 kW Weinig Conturex C226 Machining Center ---------------------------------------------- For sale on behalf of a client, includes software (Klaes) and tooling (Oertli) for IV68/IV78/IV92 and Wood/Alu 68–92 systems. Machine still is electrically connected. Technical specifications and window cross-sections available upon request! ---------------------------------------- Price of the above-mentioned machine available upon request! ---------------------------------------- Dismantling and reinstallation available upon request! (Technical specifications provided by the manufacturer – subject to change/no liability assumed!) All prices are net, plus statutory VAT. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Complete Euro-Diesel S.A. industrial control rack with original electronic control and interface cards. Included in this complete rack: 1× REDBUS EUR-0801 Rev.B rack/backplane 4× Card DIO Ver. 3.04 1× CAN R1 communication card 2× CARTE PSU Ver. 2.3 power supply cards 1× Original metal Euro-Diesel rack Manufacturer: Euro-Diesel S.A. Condition: Used Quantity available: 1 complete rack Location: Delft, Netherlands Removed from an industrial installation. The components have not been individually tested after removal. The rack is sold only as a complete unit. Individual cards are not sold separately. Please see the photographs for the exact configuration, connectors, serial numbers and condition.

Complete Euro-Diesel S.A. industrial control rack with multiple original control, communication, power supply and interface cards. Included in this complete rack: 1× MBCPU R2 rack/backplane 4× ACIN V2.7 cards 2× CARTE PSU Ver. 2.3 power supply cards 1× MONA R1 with Analog Devices AD202JN isolation amplifier 1× INTM Card V3.4 1× CAN R1 communication card 1× RS485 R1 communication card 1× Card DIO Ver. 3.04 1× Original metal Euro-Diesel rack Manufacturer: Euro-Diesel S.A. Condition: Used Quantity available: 1 complete rack Location: Delft, Netherlands Removed from an industrial installation. The components have not been individually tested after removal. The rack is sold only as a complete unit. Individual cards are not sold separately. Please see the photographs for the exact configuration, connectors, serial numbers and condition.

Concrete batching plant 100-120m3/h MIXING SET. FTS 4000 / 3000 horizontal double shaft mixer. (Sicoma, Italy) SET OF 4 HOPPERS AGGREGATE LIFT SYSTEM. Aggregate elevator belt to mixer. Length: 12,100 mm. Band width: 800 mm. Cement weighing scale with a load capacity of 1,500 kg. Construction in 3 mm thick steel sheet. Weighing system using 3 load cells. WEIGHING AND DOSING OF WATER. Weighing scale with a load capacity of 750 liters. Steel sheet construction. Weighing system using 3 load cells. POWER AND CONTROL PANEL. Watertight cabinet to be located in a dosing booth. Automatic operation. Equipped with SIEMENS electrical mechanisms. COMPUTER SYSTEM FOR AUTOMATION AND MANAGEMENT OF CONCRETE BATCHING PLANT DRY MIX/WET MIX. Dynamic control of production flows. Automatic activation of vibrators and fluidisers. Weight safety control in scales. Dynamic cycle corre ...

Contraves DC power supply PS 700 & DC servo controller NC 700

<br>AGFA Apogee Print-Drive Series 3 VLF connect to open. Open is Connect enabled in the dongle. Consisting of: CD and latest update, dongle, APIS card and APIS adapter<br><br><br>Verf Gbar: now

<br>AGFA Apogee Print-Drive Series 3 VLF connect to open. Open is Connect enabled in the dongle. Consisting of: CD and latest update, dongle, APIS card and APIS adapter<br><br><br>Verf Gbar: now

Stainless steel container with manhole 500 litres capacity Derivative: NW 50 Dimensions in cm: 120 height x 93 length x 74 width

1 office container system approx. 1,000 m2 Price: on request All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. The entire process of dismantling and loading as well as transport is carried out at the buyer's own expense and at the buyer's own expense. We cannot be liable for personal inju ...

Offer: Sgmmns container wagon for 20' and 40' containers We would sell these from location Europe: Unit price is from Station Europa see specification in the appendix: Offer price for these cars: on request €/piece plus VAT These cars can be taken on the hook immediately after inspection and payment. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices; The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been legally signed. Error reserved; All technical details; Measurements, etc., are approximate information and are non-binding for the provider. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty; We do not accept a ...

Other data and price on inquiry. Do you need another machine or the whole arrangement? We have more than 1000 other used machines on stock. Please send us an email with your need.

Material: Steel Engine: 15 kW Other data and price on inquiry. You can also get the entire system with all components.

Ladies and gentlemen, we offer: Biomass Container Heating incl. storage container with hydr. Shear floor discharge Plant complete with saemt installations Heating capacity 450 kW reachable by conversions now 480 kW Hot water production Fuel: coarse, moist spaene, wood chips up to 40% HF Best measurement results: Dust content 0.04 g/m3 at exhaust temperature of 170 degrees C For more information and pictures we are available. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any w ...

Rubber buffers / silent blocs for concrete block machines Brands: SCHLOSSER, Hess, Masa, Omag, Rekers, Frima, Techmatic Web: contec-ek

Machine is in perfect condition. All mechanical, electric parts were overhauled or changed to completely new. Along with the machine we provide 1 set of equipment for a clients bottle and basic change parts for a 2 years production. Capacity: 22500 b/h 18 months guarantee.

AGFA Apogee Print Drive Series 3 VLF with Open Connect. The Open Connect Option is activated in the Dongle. Consisting of: CD and latest Update, Dongle, APIS-Card and APIS-Adapter Available: now

AGFA Apogee Print Drive Series 3 VLF with Open Connect. The Open Connect Option is activated in the Dongle. Consisting of: CD and latest Update, Dongle, APIS-Card and APIS-Adapter Available: now

R25897/18 SCHIAVI laminating machine model: ECO Convert Junior age: 1997 size: 1.350 mm available: short dated Duplex- wet- laminating with solvent-free glue sleeve diameter: 76 mm 1. unwinding max. reel diameter: 1.000 mm core diameter: 76 mm max. reel weight: 1.600 kg web tension: 2- 35 kg 2. unwinding max. reel dimater: 1.000 mm core diameter: 75- 150 mm max. reel weight: 1.600 kg web tension: 2- 20 kg rewinding: max. reel diameter: 1.000 mm core diameter: 76 mm max. reel weight: 1.600 kg web tension: 2- 40 kg Available: kurzfristig

24 V/ 40 A battery charger from Convertitori Statici

HOT IRON OSCILLATING SAW & OIL HYDRAULIC FEEDING CONTROL SYSTEM

Universal mill for the grinding. Drive: 75 KW / 2966 UPM; 5 identical machines on stock!

Impact cross mill Drive: 75 KW 6 x sieves: 4-20 mm; fully assembled on a steel substructure, with Electr. Control.

Complete Shavereinheit with handpiece, foot switch, 2 sterilization box for the Shaverpaltes. 46 Shaverplates Fully functional. Unused, mint condition, used only for demonstration purposes.

Lid FP 4 MA Used machine (Very good) Control type CNC Built in 1990 Operating hours n/a Price 8,000 net plus VAT Dimensions 2500x2000x2500 Weight 1800 kg Location Haiger Description Universal tool ingescent machine of the brand lid suitable for tooling, fixture construction, training as well as mold making Travel: 465x385x380mm Control: Contour 2 Technical data Technical data: Lid FP4 MA (527) Built in 1992 Control CNC Hand / Contour 2 Table 800x465mm Laengsweg (X,Y,Z axis) 465x385x380mm Tool changer no Tool holder: ISO 40 Vertical spindle speeds: 31.5-3150rpm Vorschuebe 2-4000mm/min Connection 50 Hz 3x 380V Spindle motor 4KW Machine weight approx. 1900kg Dimensions 2800x2000x2500mm