127,906 used machines on RESALE, but how to find them? Machine Search
turning diameter: 340 mm turning length: 600 mm turning diameter over slide: 300 mm control: Siemens 840 D spindle passage: 55 mm spindle nose: ASA 6 number of spindle speeds: 4000 U/min spindle motor: 27 kW Number of tools: 12 VDI 40 driven stations: 12 VDI 40 speed of driven tools: U/min power of driven tools: kw rapid traverse: 30 m/min Spindlespeed subspindle: U/min power sub spindle: 15 kw range L-W-H: m weight of the machine ca.: t CNC- lathe with driven tools an subspindle Driven toolstation cannot be used due to cable breakage - chip conveyor - sub spindle - driven tool stations (not working) - tool measuring The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
1 EFI REGGIANI MEZZERA continuous bleaching and scouring instalation, year 2020, commissioned 2021 (only 4800 working hours), roller width 2000 mm, working width 1800 mm, minimal working width 900 mm, for cotton fabrics 80 to 250 GSM g/m2
bore capacity in steel (diameter): 16 mm spindle taper: MK 2 turning speeds: 340 - 2200 U/min table surface area: 243 x 243 mm quill stroke: 90 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
1 MURATA rest cone winder type 7R-2, automatic cone winder for residual yarns, 5 spindles, year 1990, magazine feed with 12 cans, diameter of supply yarn 75 to 110 mm, individual knotters, exit cones traverse 6"=150 mm, conicity 4º20', winder can make cones up to a weight of 4 Kg, winding speed 1000 m/min
General SKU271W404 LocationBarneveld MakeConthermo TypeSBE 50 No.10190007 Year of construction2002 Main Features MaterialStainless steel Volume50 Ltr. Motor3 KW Specified Features - Cooking pan Stirring-cooking vesselcheck Capacity50 l Vessel sizesDia. 700x530 mm Flat bottomcheck OutletDN50 With covercheck Electric heatingcheck 2,7 kW, 400 volt With propellor stirrercheck With motor0,38 kW, 400 volt, 1420 rpm With variable speed drivecheck Speed mixing shaft1420 rpm MaterialStainless steel 1.4571 (316Ti) Information With switchgearcheck Total height1,30 m Weight210 kg CEcheck Floorspace1,0 x 1,0 m Extra SpecificationsTemperature max 80°C, with temp controlCooking pansConthermoStirring vessels > Cooking pansBrand > Conthermo What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any ...
General SKU400W1243 LocationBarneveld MakeRousselet TypeEHBL 1053 DRGJ No.00313 Year of construction2002 Main Features MaterialStainless steel Motor30 KW Inlet diameter40 mm Specified Features - Peeling centrifuge Peeler centrifugecheck Capacity220 dm3 Basket sizesDia. 1050x680 mm Max. loading weight265 kg Motor30kW, 400/690V, 1480 rpm Max. basket speed1550 rpm With scrapercheck Hydraulic operatedcheck With hydraulic unitcheck InletDN40 Solids outletDN150 Liquid outletDN150 MaterialStainless steel 1.4435 (316L) Information Mounted on foundation platecheck With switchgearcheck Total height2,25 m Weight8365 kg ( total 14.000kg) Floorspace2,55x2,05 m Extra SpecificationsInside container, total dimensions 6,0x3,15 m, on steel frame total weight approx 14.000 kg Peeling centrifugesRousseletCentrifuges > Peeling centrifugesBrand > Rousselet What you can expect f ...
General SKU354T968 LocationBarneveld MakeWerner & PFleiderer TypeContinua 37/27 D Mach.No.220331 Sizes Screw diameter37 mm Main Features Motor7.6 KW L/D27 Specified Features - Double screw extruder Double screw extrudercheck Number of hours284222 Screw diameter37 mm L/D27 Co-rotatingcheck Number of heating zones:5: 1 cooling: 4 heating Steam heatingcheck DC-motor7,6 kW 440 Volt With variable speed drivecheck Screw speed0-400 rpm Exchangeable segmentscheck Number of temperature controllers:5 MaterialMild steel Information Year of construction1985 With switchgearcheck (as is) Total height2,3 m Floorspace3,2x1,3 m Weight1700 kg Extra Specificationswith extra screwsDouble screw extrudersWerner & PfleidererExtruders > Double screw extrudersBrand > Werner & Pfleiderer What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compar ...
General SKU345S728 LocationBarneveld MakeBarriquand echangeurs (FRA) TypeDIXS 10+9/2x9 x 2250 x 520 No.24056E Year of construction1994 Pressure Working pressure6 Bar Vacuum possiblecheck Main Features MaterialStainless steel Surface38.9 m2 Specified Features - Plate heat exchanger MaterialStainless steel 1.4571 (316Ti) Plate heat exchangerscheck Number of stages:1 Heating surface38,9 m² Capacity320 Ltr. ConnectionsDN200, DN80, DN25, (2x) DN80 Max. temperature-30/200 °C Capacity63924 W Information Floorspace3,0 x Total height1,3 M Weight1800 KGPlate heat exchangersBarriquandHeat exchangers > Plate heat exchangersBrand > Barriquand What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Pleas ...
General SKU366W1210 LocationBarneveld MakeQVF Year of construction1999 Specified Features - Distillation Distillation installationcheck Column sizesdia. 225x4440 mm Number of columns:1 With condensercheck Heating surface6m² MaterialBorosilicate Glass 3.3, Glass, Stainless steel 2.4602 (Hastelloy C-22) Information Floorspace0,25x0,25 m Total height5 m Extra SpecificationsPacking CY Hastelloy C22, Top condensor QVF SS-tube condenser (6 m²) DistillationQVF GlasstechnikColumns > DistillationBrand > QVF Glasstechnik What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU223N084 LocationBarneveld MakeNewmix TypeSysyem 1000 Premium EU No.701024 Year of construction2008 Main Features MaterialStainless steel Motor0.55 KW Length950 mm Specified Features - Stirrer Stirrercheck Shaft length1x 950mm (1000l), 1x 670mm (500l), 1x 570mm (200l), 1x 470mm (50l), 1x 400mm (25l) Motor0,55 KW, 230 Volt With variable speed drivecheck MaterialStainless steel 1.4301 (304) Information Mounted on framecheck Mounted on wheelscheck With switchcheck With switchgearcheck Floorspace1,1 x 1,6 m Total height2,0 m Weight400 KG Extra SpecificationsMixer for liquid bags2x kettle 200 l double-walled on wheelsTempering unit Single STL 1-9-B5/10-TKGStirrersNewmixMixers > StirrersBrand > Newmix What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- ...
General SKU329T1339 LocationBarneveld MakeDec TypeDrum sealing cover No.DSC-131 Year of construction2016 Main Features MaterialStainless steel Number of1 heads Specified Features - Powder filler MaterialGlass, Stainless steel 1.4435 (316L) Information Mounted in framecheck Total height2,9 m Weight400 kg CEcheck Floorspace0,79x1,32 m ATEX compatiblecheck Extra SpecificationsWith powderbox, Dia:500x200mm lifting column stroke 320mm balancer cap. 7,5-11,5 kg suction lance DN40 triclamp x approx 1500mm cip connection Stäubli R 1/4” hub 2000mm, :Magnehelic box Bizerba weighing scale, type ST-D-Z2, (Ex) Dec powder transfer system, type PTS 80-N cap. 500l/h temp range max 40°C working pressure -50/+50mbar PED class Gas 2/ Art. 3.3 consumption 5 Nm3/h (stickstoff) at 3 bar product input DN 32 Triclamp, product output DN80,PN10 pneumatic control, dim. 600x380x210 mm roll ...
General SKU329T1340 LocationBarneveld MakeDec TypeDrum sealing cover No.DSC-130 Year of construction2016 Main Features MaterialStainless steel Number of1 heads Specified Features - Powder filler MaterialGlass, Stainless steel 1.4435 (316L) Information Mounted in framecheck Total height2,9 m Weight400 kg CEcheck Floorspace0,79x1,32 m ATEX compatiblecheck Extra SpecificationsWith powderbox, Dia:500x200mm lifting column stroke 320mm balancer cap. 7,5-11,5 kg suction lance DN40 triclamp x approx 1500mm cip connection Stäubli R 1/4” hub 2000mm, Magnehelic box Bizerba weighing scale, type ST-D-Z2, (Ex) Dec powder transfer system, type PTS 80-N cap. 500l/h temp range max 100°C pressure -50/+50 PED class Gas 2/ Art. 3.3, consumption 5 Nm3/h (stickstoff) at 3 bar, product input DN 32 Triclamp, product output DN80 PN10, pneumatic control, dim. 600x380x210 mm, roll conveyor, ...
General SKU200T001 LocationBarneveld MakeServolift GmbH TypeContailer mischer No.10334 Year of construction2001 Main Features MaterialMild steel Motor6 KW Specified Features - Tumbler mixer Tumbler mixercheck Barrel mixercheck CapacityMax: 1350kg Length/Depthcontainer max: 1250x1200mm With motor3kW,230/400Volt, 1400rpm/48rpm (2x) With brake motorcheck MaterialMild steel Information Mounted on mild steel framecheck With switchcheck With switchgearcheck(as is) CEcheck Floorspace4,3x2,5m Total height3,8mTumbler mixersServoliftMixers > Tumbler mixersBrand > Servolift What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU315T1101 LocationBarneveld MakeAzo TypeDFS 100x1380 No.825989, Year of construction2005 Main Features MaterialStainless steel Motor0.75 KW Inlet diameter300 mm Specified Features - Miscellaneous transport MaterialStainless steel Information CEcheck Floorspace2,7x1,4 m Total height2,3 m ATEX compatiblecheck Extra SpecificationsIBC lock, type EB12: with: screw conveyor, type DFS 100x1380 NE300, size: dia. 100 mm, lenght 1380 mm, Vibration motor, Stainless steel vessel, type D1104XD305 on frame, volume 600 LtrMiscellaneous transportAZOConveying systems > Miscellaneous transportBrand > AZO What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more mac ...
General SKU315T1103 LocationBarneveld MakeAzo TypeG21-text No.045256B Year of construction2005 Main Features MaterialStainless steel Motor0.75 KW Inlet diameter300 mm Specified Features - Miscellaneous transport MaterialStainless steel Miscellaneous transport Capacity2x IBC Information Mounted in framecheck Total height2,71 m CEcheck Mounted on legscheck Floor space4,10x1,40 m ATEX compatiblecheck Extra Specificationsscrew conveyor.type DFS 100x1380 NE300size diameter 100 mm, length 1380 mm,outlet diameter: 125 mm0,75 kW, 230/400 Volt, (Ex) Vibration motor.0.4 kW, 400 Volt, (Ex) stainless steel drum in frame.type D1104XD305 on frame, volume 600 Ltr.connection in: 45 mm, 125mm (2x)connection out: 65 mmground surface: 1.7x1.6 mheight: 1.6 m Miscellaneous transportAZOConveying systems > Miscellaneous transportBrand > AZO What you can expect from Foeth: -- Machine is i ...
TRAKMIX – MOBILE CONTINUOUS MIXING UNIT First introduced in 2015, Trakmix is a tracked mobile continuous mixing unit designed for rapid deployment and high-volume production. Its tracked undercarriage eliminates the need for transportation permits, allowing easy movement between sites. Capable of producing up to 250 TPH, it delivers precise and consistent mixing for a wide range of construction applications. The unit is fully self-contained and can be set up in minutes via remote control, with complete weighing of all materials for operational accuracy. KEY FEATURES • Tracked undercarriage for ultra mobility • No transportation permits required • Continuous mixing capacity up to 250 TPH • Self-contained unit with onboard diesel generator • Integrated silo, hopper, mixer, and control panel • Rapid remote-controlled setup • Full weighing capability for all material ...
KRUPS Modular Conveyor System – Unmatched Efficiency for Industrial Automation The KRUPS Modular Conveyor System, part of the KRUPS LOGO!MAT L series, is expertly crafted for industrial automation, seamlessly connecting workstations with standardized pallets. This robust friction roller conveyor boasts a nominal width of 514 mm, specifically engineered for loads up to 250 kg per pallet, optimizing both precision and efficiency in handling heavy components. With integrated automation modules, this system offers lift units, rotation modules, diverters, and stop positions for advanced routing and orientation. Designed for straightforward control integration, it includes mounts for RFID and photoelectric sensors, ensuring precise tracking and coordination with standard PLC or fieldbus I/O. Made in Germany, the systems high-quality components and modular design offer superior longevity and ...
Zeiss measuring machine model Contura year of manufacture 2018 motorized measuring probe further information and pictures on request.
Conventional precision lathe WEILER "CONDOR VC" With 3 axis digital display Siemens Year of Make: 2012 Spindle bore: 56 mm Center width: 800 mm Circumference Ø over bed : 205 mm Speed range: 30 – 3500 rpm With the following accessories: Multifix Tool Holder Chip backsplash wall with interior lighting Coolant Setup 3 jaw chuck 0 200 mm Feed protection Moving Lynette 0 approx. 150 mm Tailstock with extendable drill quill Operating instructions
used confectionery oven Miwe Condo CO 4.1208, overhauled, 4 floors, with hood, steam condenser and cooking chamber, shelves 120 x 80 cm, electric, 4 solenoid valves renewed, 4 servo motors renewed, water pot renewed, steam cleaned, Ser. no. 703 774, 33.8 kW, 400/230 V, 50 Hz
Dimensions (L/W/H): 860x1060x1060 mm Weight: 280 kg Total power requirement: 3 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A twin screw extruder is offered. Drive: ASEA electric motor type ACA 200-6L, 50.5kW, 1460rpm. Inspection possible by prior arrangement.
Key data: 10 liter, 8 liter, 1
available 10l tangential mixer Description attached!
used
Key data: 3500 kN, 70 mm
DEMAG Ergotech 350/710-2300 Concept • Clamping Force: ~3,500 kN (≈350 ton) • Injection Unit: • Screw Diameter: typically 70 mm • Injection Volume: ~1,212 cm³ • Injection Pressure: up to ~1,877 bar • Tie Bar Spacing: ~710 × 630 mm • Plate Dimensions: ~710 mm plate width • Opening Stroke: ~675 mm
Manufacturer: ESC Model: Continuous Dryer Perfecton S with UV Year of Manufacture: 2020 Technical Specifications Heating Chamber 80°C - Galvanized nozzle plate - Process fan: TRZ 250-3 - Indirect air intake from process room - Recirculated air volume: 3,400 m³/h at 510 Pa - RRH heating register: 18 kW at max. 80°C - Drive motor: 2.2 kW / B3 / 1,410 rpm / insulation class F - Length: 2,000 mm Cooling Chamber - Process fan: TRE 250-3 - Supply and exhaust air volume: 3,400 m³/h at 800 Pa - Stainless steel drip tray for process fan - Drive motor: 2.2 kW / B3 / 1,500 rpm / insulation class F - Without cooling register and refrigeration unit - Length: 2,000 mm Discharge Element - Steel drive roller with rubber coating - Mounting for belt drive - Length: 500 mm Construction Details - All hoods and cladding panels made of electrolytically galvanized steel sheet - Heating chamber h ...
Manufacturer: ESC Model: Continuous Dryer Perfecton S Year of Manufacture: 2021 Technical Specifications Heating Chamber 80°C - Galvanized nozzle plate - Process fan TRZ 250-3 - Indirect air intake from process room - Air circulation volume: 3,400 m³/h at 510 Pa - Electric heating register: 18 kW at max. 80°C - Drive motor: 2.2 kW / B3 / 1,410 rpm / ISO F - Length: 2,000 mm Cooling Chamber - Process fan TRE 250-3 - Supply and exhaust air volume: 3,400 m³/h at 800 Pa - Stainless steel drip tray for process fan - Drive motor: 2.2 kW / B3 / 1,500 rpm / ISO F - Without cooling register and chiller - Length: 2,000 mm Discharge Element - Rubber-coated steel drive roller - Mounting for belt drive - Length: 500 mm General Construction - All hoods and cladding panels made of electro-galvanized steel sheet - Heating chamber hoods are insulated DIMENSIONS - Belt width: 1,700 mm - B ...
Deck Oven Miwe Condo CO 4.1208 - Manufacturer: Miwe - Model: Condo CO 4.1208 - 3 shelves each 120x80cm - each shelf for 2 trays 60x80cm long next to each other or 4 trays 60x40cm - Each floor with separate control panel display - Top and bottom heat can be adjusted separately - Each floor with separate steam box - With restart function - With ECO function -each floor individually 9.45 kW together 37.8kW Entire furnace with proofer 39.7 kW - with proofer Proofer 1.9kW - With exhaust hood - Can be moved on castors - Year of construction 2004
Type: Flip-over conveyor 650 Serial number: E050970105101 Year of construction: 2016 Belt width: 650 mm Flip-over: 90 - 200 mm Power: 3 x 400V, 50Hz, 0.5kW Dimensions: 2100 x 1300 x 1450 mm
Key data: 2500 kN, 579 g/PS, 60 mm
1.0 St. gebr. Injection Molding Machine with Robot Manufacturer: DEMAG Type: ET250-840 Concept Year of Make: 2004 Clamping force: 250 tons Spar spacing 630 x 630 mm Screws DN: 60 mm Max. displacement: 636 cm³ Moulded part weight: 579 g/hp Control: NC5 Equipment: Robot manufacturer: WITTMANN, type: W633-931 2 pcs core train
Key data: 600 kN, 94 g/PS, 30 mm
1.0 St. gebr. Injection Molding Machine with Robot Manufacturer: DEMAG Type: ET60-200 Concept Year of Make: 2003 Clamping force: 60 tons Spar spacing 420 x 420 mm Screws DN: 30 mm Max. displacement: 106 cm³ Moulded part weight: 94 g/hp Control: NC5 Equipment: Robot manufacturer: WITTMANN, type: W621-1381 2 pcs core train
A conventional lead and feed screw lathe Weiler without safety components (e.g. spindle guard) is available. Center distance: 800mm, center height: 155mm, spindle bore: 38mm, swing diameter over bed/bed slide/cross slide: 330mm/290mm/170mm, max. workpiece weight: 100kg, spindle taper: MK5. Faceplate diameter: 300mm, chuck diameter: 165mm, speed: 2800rpm, quill stroke: 110mm, quill diameter: 50mm. Machine dimensions X/Y/Z: approx. 1900mm/850mm/1300mm, weight: approx. 1050kg. On-site inspection is possible.
Vertical Cylindrical Conical Bottomed Fermenter 8000L - Brim Full Capacity Side entry manway doors Cooling Jackets, insulation and cladding Manufactured in 2015 This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk
Gebhardt Freight Elevators ConVer 146.03, 4 Stops, Doors Bottom Front Upper Stops Rear, Drive Top Right and Top Left, Colour 5019/7053 Conveying height 9600 mm (heights adjustable) Car width 2800 mm / Car depth 2060 mm / Car height 2000 mm Drive-on ramp 100/ pit 120mm possible Year of construction 2017 Delivery time with adjustment approx. 8 weeks, without changes 4-6 weeks the price quoted is only an approximate price per machine without assembly/freight and VAT (exact price will be calculated depending on the renovation work required) Seller Offer No. resale 2170139/2170140
GEBHARDT ConVer 146.02 freight elevator, 2 stops, doors at the bottom front - upper stop at the back, drive at the top right Conveying height 4,580mm (heights adjustable) Car width 1200mm/ Car depth 1460mm/ Car height 2000mm Ramp 60mm/ pit possible Year of manufacture 2007 Delivery time for adaptation approx. 8 weeks without changes 4-6 weeks
Battery Mould with 6 pockets Year of manufacture: 2017 - Pocket dimensions: 7.00 m x 3.0 m - 6 pockets - 2 outer walls - 3 butterfly formwork inserts - Suitable for precast wall thicknesses: 15 cm to 30 cm - Almost like new, as it was only used for a short time - Mechanical tensioning system - Electric drive units - Complete accessories
Two lead and feed screw lathes by Weiler are available. 1) Weiler Condor VS-2, distance between centers: 800mm, center height: 155mm, swing diameter over bed/cross slide: 330mm/160mm, speed: 2800rpm, machine dimensions X/Y/Z: approx. 1900mm/900mm/1500mm. 2) Weiler Praktikant M, distance between centers: 650mm, center height: 160mm, swing diameter over bed/cross slide: 320mm/175mm, machine dimensions X/Y/Z: approx. 1700mm/1000mm/1700mm, weight: approx. 700kg. Both machines show isolated individual functional limitations, but are operational. Documentation available. On-site inspection is possible.
This Concept Laser M2 cusing 3D Printer was manufactured in the year 2015.
This IMA Novimat Contour I/G80/790/L20 edgebander was manufactured in 2009. It is designed for efficient edge banding applications, ensuring precise and consistent results. Ideal for woodworking professionals seeking reliable machinery. Contact us for more information.
An insulated process vessel is available. Temperature min./max.: -10°C/143°C, volume: 2491L, operating pressure range: -1bar/3bar, test pressure: 5.6bar. An on-site inspection is possible.
This Saeilo Contur MMV 810 S vertical machine center, manufactured in 2012, features a Siemens 828D control system with an electronic handwheel for precise operation. It has 6224 duty cycle hours and 1821 spindle hours. The traverse paths are X = 810mm, Y = 400mm, Z = 500mm, with a 900 x 400mm table featuring 3 T14 slots. It includes a double arm tool changer with 20 slots, a BT-40 tool holder, and a high-performance spindle reaching 10000 rpm with oil cooling and a 20 bar internal coolant supply. Contact us for more information.
This 3-axis ZEISS Contura 7/10/6 RDS was manufactured in 2019 and features a robust motorized CNC drive system with a maximum vector speed of 465 mm/s. It includes the ZEISS RDS-C articulating head and VAST XXT TL3 sensor, capable of scanning speeds up to 150 points/second. Ideal for precise measurements with a maximum workpiece weight of 730 kg. Consider the opportunity to buy this ZEISS Contura 7/10/6 RDS CMM machine. Contact us for more information about this machine.
This DEMAG Concept 420/810-2300 Injection moulding machine was manufactured in the year 2006 in Germany. It is equipped with a Ergo control unit. The machine has a screw diameter of 60 mm, a stroke volume of 891 cm³, a injection pressure of 2420 bar, a shot weight of 800 g/PS and clamping force of 4200 kN. The distance between bars are 800x710 mm and the size of mould platens 1200x1100 mm.
This 5-axis Cosmec Conquest 515 was manufactured in 2021. A robust CNC processing center featuring a fixed work table, double-sided driven traveling portal, and a continuously interpolating 5-axis milling spindle. It excels in machining solid wood, wood-based materials, and plastics. Key features include dual gantry motorization, high travel speeds, and a 5-axis spindle with liquid cooling. Ideal for high-precision tasks. Contact us for more information about this machine.
Medium: demineralized feed water (Aqua Purificata), max. vessel operating pressure: 5bar, max. temperature: 200°C, vessel volume: 300l, test pressure: 8.68bar, steam output: 300kg/h. The steam generator was designed as part of an overall system, however it has its own control and automation and can be used in separate operation. Documentation available. An on-site inspection is possible.
Inlet medium: AP water, outlet medium: distillate, distillate outlet temperature: approx. 99°C, tank volume: 900l, number of preheaters/evaporator columns: 3/4, distillate production: 300l/h, pure steam production: approx. 70kg/h, operating modes: distillate production/pure steam production/WFI loop system sterilization, controls: Siemens SPS S7-300. The distillation unit was designed as part of an overall system but has its own control and automation and can be operated separately. Documentation available. An on-site inspection is possible.
General SKU422U1341 LocationBarneveld MakeSiebtechnik GmbH TypeConiflux-48-6-6-6 Main Features MaterialStainless steel Surface1.1 m2 Sizes diameter1200 mm Specified Features - Vibro sieve Vibro sievecheck Sieve surface1,1 m² Number of sieve decks:2 Sieve sizesDia. 1200 mm With covercheck InletDia. 200 mm OutletDia. 200 mm Drive excentercheck Motor3,3 kW, 380Volt, 1500 rpm Sieve perforation1.6 mm and 4,8 mm MaterialStainless steel 1.4301 (304) Information No.25751 Year of construction1990 Mounted on stainl. st. framecheck Floor space1,3x1,3 m Total height1,9 m Weight460 kgVibro sievesSiebtechnikSieves > Vibro sievesBrand > Siebtechnik What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. ...
maximum number of results exceeded
please refine your search
