air con used for sale

A mobile diesel screw compressor unit CompAir, suitable for construction site use, is available. Volume flow: 20m³/min, max. operating pressure: 24bar, motor power: 224kW, engine: Cummins QSB6.7, chassis: height-adjustable, fuel tank capacity: 350l. Machine dimensions: approx. 5500mm/2000mm/2700mm, weight: approx. 3500kg. Documentation available. An on-site inspection is possible.

turning diameter: 555 mm turning length: 3000 mm control: Monforts Control System type: MTC-K CCUO turning diameter over slide rest: 290 mm cross movement: . mm spindle passage: . mm turning speeds: 1600 U/min transmission ratio: . quill stroke: . mm rapid traverse: . m/min main drive motor: . kW 3-jaw chuck: Rotha-S Plus 3-jaw-chuck diameter: . mm total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: . m Serial number: 262/01 Machine number: 08122394 Quick-change tool post Coolant system Monitor Chip conveyor The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are ...

A mobile high-performance construction site compressor Atlas Copco for drilling applications is available. Design: tandem, volume flow: 28m³/min, max. operating pressure: 25bar, motor power: 368kW, engine: Scania DC13, fuel tank capacity: 600l, fuel consumption per hour at 75% and 100% load: 55l/77l. Machine dimensions X/Y/Z: approx. 6000mm/2100mm/2500mm, weight: approx. 7400kg, operating hours: approx. 650h. Including aftercooler, water separator, and PF filter. Documentation available. On-site inspection possible.

Turbine Control Woodward 505 Turbine control, built in 2007 of 2600 KW Condensation turbine with 0 operating hours 1 available. 3.3 KV / 100 V, 50 Hz, 626 A Price: 6,900 €, plus VAT, FCA-free. Turbine Control Woodward 505 Manufacturer: Woodward Type: Turbine Control Rated power [KVA]: 3,575 Voltage [V]: 3.3 KV / 100 V Frequency [Hz]: 50 Operating voltage [V]: 24 Rated voltage [A]: 626 Year of Make: 2007 Dimensions [m]: 1.60 x 0.60 x 2.00 Weight [kg]: 500

length: 2000 mm width: 1000 mm height over floor: 1000 mm total power requirement: 0 kW weight of the machine ca.: 600 kg dimensions of the machine ca.: 31,51,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Doka Folding console K Console for producing a folding platform 52.40 kg Price: EUR 186,25 per piece

Year of construction: 2000 CNC controller: '3D contouring control Millplus Axes X-axis travel mm: 1250 Y-axis travel mm: 880 Z-axis travel mm: 800 C-axis degrees: 360º (0,001) Feed rates m/min: 40 Rapid traverse m/min: 40 Milling/turning table nc: Number of pallets: 1 Table dimensions mm: Ø1000 Max. workpiece weight kg: 1000 max. torque Nm: 7900 Spindle Spindle speed rpm: 18000 Spindle drive power kW: 15/10 (40%ED/cont) Cooling Tank capacity: 600 Tool system Tool holder: CAT 40 Tool magazine slots: 60 Tool changer: Doeble gripper Equipment Electronic Handwheel Chip conveyor Internal cooling lubricant supply Rotating inspection windows Rinsing gun Preapared for RENISHAW sonde Accuracy package Ready for internal cooling (40/80 bar) Paper band filter Machine running times Under power: 33831 Spindle Working: 6328 Rate ...

Key data: 1600 mm, 1250 mm, 100 mm

Control: HEIDENHAIN iTNC 530 Spindle: 18,000 rpm, HSK-A63 Rapid traverse: 60 m/min | Working feed: 20–15,000 mm/min Table size: 1,500 × 1,250 mm (L × Q) Workpiece weight: up to 4,000 kg Table speed: up to 10 rpm Tool Magazine: 60 Slots Machine weight: approx. 34 t

Key data: 800 mm, 700 mm, 600 mm

Year of manufacture approx. 2002 CNC control MillPlus Plate changer Yes (2-fold) Swivel table No Tool magazine 60 places IKZ/HD cooling Yes Chip Conveyor Yes

1 gebr. Lattice beam processing plant, make Progress / GTA with infeed and outfeed working magazine and a double welding head Lattice girder processing station with multiple linear robots for storage & processing composed of: Auto. Storage system with handling beam Auto. transversely movable positioning carriage with 6 pcs lattice girder infeed tracks Lattice girder cutting machine Linear movable gripping unit (inlet gripper) Linear movable gripping unit (outlet gripper) Conveyor & buffer magazine, stacking beam Technical data: lattice beam height 70-300 mm, lattice girder width 70 - 90 mm, max. measuring/cutting length 10,000 mm, min. measuring/working length 800 mm, lattice carrier upper chord connecting welding system, for processing lattice girders type KT 800 in Heights from 70 - 360 mm and width from 70 - 90 mm

Key data: 1800 mm, 2000 mm, 1100 mm

Large 5-axis universal/gantry machining centre for heavy workpieces Technical key data (typical, depending on variants): Table/load capacity: NC rotary table approx. 1,700 × 1,400 mm, up to approx. 5,000 kg Head/table axes: Swivel milling head B 0–180°, C 360° (resolution up to 0.001°) Spindle: up to approx. 10,000 min⁻¹, HSK-A63 Tool magazine: usually ~60 places Control: often Heidenhain TNC 430 (built in 2003) Peripherals (common): IKZ/HD cooling, chip conveyor

gebr. Cutting straightener Progress Ø 6 - 14 mm Outlet 8 m 5 reels Switchboard PC, Software Documentation

Year of construction: 2013 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 450 Y-axis travel mm: 580 Z-axis travel mm: 400 C-axis degrees: 360º (0,0001) A-axis degrees: +10 / -110º Feed rates m/min: 80 Rapid traverse m/min: 80 Acceleration in the axes m/s2: 13 Milling/turning table nc: Number of pallets: System 3R (21 pallets type GPS 240, 30pallets type GPS 120 and 24 pallets type ITS50) Table dimensions mm: baseplate for root pallet Maximum workpiece size (D x H) mm: for pallet GPS 240 (275x275x200mm); for pallet GPS 120 (150x150x200mm) and for pallet ITS50 (ø70x200mm) Max. workpiece weight kg: 150 (pallet + workpiece) Spindle Spindle speed rpm: 28000 Spindle drive power kW: 35/25 (40%ED/cont) Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 600 Tool system Tool holder: HSK-A 63 Tool magazine slots: 120 T ...

TGW Roller Conveyor 2400-475-420 RA2436 Make: TGW Year of manufacture: 2000 Roller width (RB): 420 mm Nominal/outer width (NB): 475 mm Module length: 2400 mm Diameter rollers: 50 mm Distance between rollers: 75 mm frame height: 115 mm 40 modules available. Optional: Drive station with deflection supports Side guide adapted conveyor speed range with frequency converter Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 2000 condition: gut Conveying length in mm: 2400 Nominal / outside width in mm: 475 Roll width in mm: 420 Roll division in mm: 60 Driven: NEIN, Motorstation nicht enthalten scope of delivery: Ohne Motorstation, without supports and side guides For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward  ...

Key data: 900 mm, 500 mm, 500 mm

Offered here is a machining center from the manufacturer Emco Famup with 4th axis with tailstock. The machine is freely loaded onto trucks. Make: Emco Famup Type: EmcoMill E900 Year of Make: 2008 Control: Siemens Sinumerik 810D - ShopMill Specifications: Travel distances X-Y-Z: 900x500x500 mm Rapid traverse X-Y-Z: 24 m/min A-axis travel range: 3600.001° Fpjc Ha Isxrvrdoh U Hop Table clamping surface: 1000x520 mm Max. workpiece weight: 800 kg Minimum distance between vertical spindle and table: 100 mm Maximum distance between vertical spindle and table: 600 mm Tool magazine: 30 positions Tool holder: ISO 40 DIN69871 Spindle speed: max. 12000 rpm Spindle power: 13 kW Coolant supply through the spindle: 15 bar (IKZ - CTS) Total weight: approx. 5 tons Dimensions: approx. 4000x2400x2900 mm

1 METTLER hank to cone winder type SM-201, year 1981, 36 spindles, exit traverse 6", conicity 9º15'

1 BRÜCKNER open width washing range type SCOUT TR 3/3, year 1995, fully overhauled by BRÜCKNER in 2010 with new software and SIEMENS 15" touch screen, 6 compartments (3 with rotary washers + 3 dwell compartments)

We have a new TECJET 110 for sale. DN100 QTY 1 pc Part Number 369910 Email for special price and photos. Available for immediate delivery

General SKU394U1110 LocationBarneveld MakeLauda TypeTR400 HK/K-EX Mach.No.HKS13075 Pressure Working pressure10 Bar Main Features Heating (medium)Oil Capacity12.46 KW Temp.130 °C Specified Features - Temperature control unit MaterialStainless steel 1.4571 (316Ti) Heating medium:Therminol D12 Electric capacity12,46 kW, 400 volt (Ex) Temperature-35ºC/+130ºC With pumpcheck 2x Capacity18m²/h Motor5,5kW, 400/690Volt, 2925rpm (EX) (2x) Information Year of construction2013 With switchcheck CEcheck Floorspace1,75x1,0 m Total height2,45 m Weight1800 kg ATEX compatiblecheckTemperature control unitsLaudaHeat exchangers > Temperature control unitsBrand > Lauda What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld,  ...

General SKU394U1121 LocationBarneveld MakeLauda TypeTR400 HK/HK-EX Mach.No.HKS08025 Pressure Working pressure16 Bar Main Features Heating (medium)Oil Capacity12.9 KW Temp.200 °C Specified Features - Temperature control unit MaterialStainless steel 1.4571 (316Ti) Temperating machinecheck Heating medium:Therminol D12 Electric capacity12.9 kW, 400 volt (ex) Temperature-40°C/+200°C With pumpcheck (2x) Motor5,5 kW, 400/690 volt, 2800 (ex) Information Year of construction2008 Total height2,50 m CEcheck Floorspace1,75x1,0 m Weight1800 kg ATEX compatiblecheckTemperature control unitsLaudaHeat exchangers > Temperature control unitsBrand > Lauda What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherland ...

General SKU394U1122 LocationBarneveld MakeLauda TypeTR400 HK/HK-EX Mach.No.HKS08027 Pressure Working pressure16 Bar Main Features Heating (medium)Oil Capacity12.9 KW Temp.200 °C Specified Features - Temperature control unit MaterialStainless steel 1.4571 (316Ti) Temperating machinecheck Heating medium:Therminol D12 Electric capacity12.9 kW, 400 volt (ex) Temperature-40°C/+200°C With pumpcheck (2x) Capacity18m²/h Motor5,5kW, 400/690 Volt, 2880 rpm (ex) (2x) Information Year of construction2008 Total height2,50 m CEcheck Floorspace1,75x1,0 m Weight1800 kg ATEX compatiblecheckTemperature control unitsLaudaHeat exchangers > Temperature control unitsBrand > Lauda What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in  ...

General SKU394U1120 LocationBarneveld MakeLauda TypeTR 400 HK/HK-EX Mach.No.HKS08026 Pressure Working pressure16 Bar Main Features Heating (medium)Oil Capacity12.9 KW Temp.200 °C Specified Features - Temperature control unit MaterialStainless steel 1.4571 (316Ti) Heating medium:Therminol D12 Electric capacity12.9 kW, 400 volt Temperature-40°C/+200°C With pumpcheck 2x Capacity18m²/h Motor5,5kW, 400/690Volt, (EX) Information Year of construction2008 Total height2,50 m CEcheck Floorspace1,75x1,0 m Weight1800 kg ATEX compatiblecheckTemperature control unitsLaudaHeat exchangers > Temperature control unitsBrand > Lauda What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in  ...

General SKU394U1112 LocationBarneveld MakeLauda TypeTR400 HK/KT-EX Mach.No.HSK08023 Pressure Working pressure16 Bar Main Features Heating (medium)Oil Capacity12.9 KW Temp.200 °C Specified Features - Temperature control unit MaterialStainless steel 1.4571 (316Ti) Temperating machinecheck Heating medium:Therminol D12 Electric capacity12,9 kW, 400 volt (Ex) Temperature-40°C/+200°C With pumpcheck (2x) Capacity18m²/h Motor5,5kW, 400/690 Volt, 2880rpm (EX) (2x) Information Year of construction2008 With switchcheck CEcheck Floorspace1,75x1,0 m Total height2,50 m Weight1800 kg ATEX compatiblecheckTemperature control unitsLaudaHeat exchangers > Temperature control unitsBrand > Lauda What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspec ...

General SKU394U1115 LocationBarneveld MakeLauda TypeTR400 HK/KT-EX Mach.No.HKS08021 Pressure Working pressure16 Bar Main Features Heating (medium)Oil Capacity12.9 KW Temp.200 °C Specified Features - Temperature control unit MaterialStainless steel 1.4571 (316Ti) Heating medium:Therminol D12 Electric capacity12.9 kW, 400 volt (ex) Temperature-40°C/+200°C With pumpcheck (2x) Capacity18m²/h Motor5,5kW, 400/690 Volt, 2880 rpm (EX) (2x) Information Year of construction2008 Total height2,50 m CEcheck Floorspace1,75x1,0 m Weight1800 kg ATEX compatiblecheckTemperature control unitsLaudaHeat exchangers > Temperature control unitsBrand > Lauda What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands ...

General SKU394U1133 LocationBarneveld MakeLauda TypeTR400 HKT/KT-EX Mach.No.HKS08031 Pressure Working pressure16 Bar Main Features Heating (medium)Oil Capacity12.9 KW Temp.200 °C Specified Features - Temperature control unit MaterialStainless steel 1.4571 (316Ti) Temperating machinecheck Thermal oil heaterTherminol D12 Heating medium:Oil Heating capacity-40°C/+200°C Electric capacity12,9 kW, 400 volt (ex) With pumpcheck (2x) Motor5,5 kW, 400 volt, 2880 (EX) Information Year of construction2008 Total height2,45 m CEcheck Floorspace1,75x1,0 m Weight1800 kg ATEX compatiblecheckTemperature control unitsLaudaHeat exchangers > Temperature control unitsBrand > Lauda What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in  ...

General SKU349U1124 LocationBarneveld MakeLauda TypeTR 400 HK-Ex Mach.No.HKS0836 Pressure Working pressure16 Bar Main Features Heating (medium)Oil Capacity12.9 KW Temp.200 °C Specified Features - Temperature control unit MaterialStainless steel 1.4571 (316Ti) Thermal oil heatercheck Therminol D12 Water heaterwater/glycol Heating medium:oil/water/glycol Electric capacity12,9kW, 400Volt (EX) Temperature-40°C/+200°C With pumpcheck (2x) Capacity18 m³/h Motor5,5 kW, 400/690 volt, 2925 rpm (EX) (2x) Information Year of construction2008 Mounted on framecheck Total height2,30 m CEcheck Floorspace2.20x1,0 m Weight1600 kg ATEX compatiblecheck Extra SpecificationsThis Lauda is equipped with a heat exchanger. Brand: Merck Built by: Herbst Maschinenfabrik GmbH Factory number: 08-12583-26/2 Material: 1.4571, Stainless Steel 316TI Jacket data, pressure: -1/+16bar, tes ...

General SKU442W1463 LocationBarneveld MakeDutch TecSource Typedoseer/mengschroef Mach.No.20030328 Main Features Motor0.55 KW Length2000 mm Inlet diameter230 mm Specified Features - Horizontal screw conveyor MaterialStainless steel 1.4552 Horizontal conveyor screwcheck Trough-typecheck Diameter300 mm Length2000 mm Shaft diameter100 mm Pitch130 mm With hoppercheck Inlet230x70 mm Outlet160x155 mm Motor0.55 kW, 230/400 volt Screw speed59 rpm Outlet height1180 mm With coverscheck Information Year of construction2004 Mounted on framecheck Mounted on wheelscheck With switchcheck CEcheck Floorspace2,5x1,0 m Total height1,8 m Weight430 kg Extra SpecificationsThis screw conveyor is equiped of spray nozzles along the length of the screw. on the product input side is an opening to let sprayed liquid flow out again.Horizontal screw conveyorsDutch TecSourceConveying  ...

General SKU394U1130 LocationBarneveld MakeLauda TypeTR 400 HK/HK-EX Mach.No.HKS08025 Pressure Working pressure3 Bar Main Features Heating (medium)Oil Capacity12.9 KW Temp.200 °C Specified Features - Temperature control unit MaterialStainless steel 1.4571 (316Ti) Thermal oil heatercheck (Therminol D12) Heating medium:Oil Electric capacity12.9 kW, 400 volt (Ex) Temperature-40°C/+200°C With pumpcheck (2x) Capacity18 m³/h Motor5,5 kW, 400/690 volt, 2925 rpm (EX) (2x) Information Year of construction2008 Total height2,50 m CEcheck Floorspace1,75x1,00 m Weight1800 kg ATEX compatiblecheckTemperature control unitsLaudaHeat exchangers > Temperature control unitsBrand > Lauda What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the mac ...

General SKU394U1114 LocationBarneveld MakeLauda TypeTR 400 HK/KT-EX Mach.No.HKS08022 Pressure Working pressure3 Bar Main Features Heating (medium)Oil Capacity12.9 KW Temp.200 °C Specified Features - Temperature control unit MaterialStainless steel 1.4571 (316Ti) Heating medium:Therminol D12 Electric capacity12,9 kW, 400 volt (ex) Temperature-40°C/200°C With pumpcheck (2x) Capacity18 m³/h Motor5,5 kW, 400/690 volt, 2925 rpm (EX) (2x) Information Year of construction2008 Total height2,50 m CEcheck Floorspace1,75x1,00 m Weight1800 kg ATEX compatiblecheckTemperature control unitsLaudaHeat exchangers > Temperature control unitsBrand > Lauda What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlan ...

General SKU394U1149 LocationBarneveld MakeLauda TypeTR400 HKT/K-EX Mach.No.HKS13073 Pressure Working pressure10 Bar Main Features Heating (medium)Oil Capacity12.46 KW Temp.130 °C Specified Features - Temperature control unit MaterialStainless steel 1.4571 (316Ti) Heating medium:Therminol D12 Electric capacity12.46 kW, 400 volt (ex) Temperature-35°C/+130°C With pumpcheck 2x Capacity18m²/h Motor5,5 kW, 400/690 volt, 2925 rpm (EX) (2x) Information Year of construction2013 Total height2,50 m CEcheck Floorspace1,75x1,0 m Weight1800 kg ATEX compatiblecheckTemperature control unitsLaudaHeat exchangers > Temperature control unitsBrand > Lauda What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherland ...

General SKU394U1127 LocationBarneveld MakeLauda TypeTR 400 K-EX Mach.No.HKS08034 Pressure Working pressure16 Bar Main Features Heating (medium)Oil Capacity6.45 KW Temp.200 °C Specified Features - Temperature control unit MaterialStainless steel 1.4571 (316Ti) Heating medium:Therminol D12 Electric capacity6,45 kW, 400Volt. (EX) Temperature-40°C/+200°C With pumpcheck Capacityunknown Motor5,5kW, 400/690 Volt, 2880 rpm (EX) Information Year of construction2008 Mounted on framecheck CEcheck Floorspace1,75x1,00 m Total height1,70 m ATEX compatiblecheckTemperature control unitsLaudaHeat exchangers > Temperature control unitsBrand > Lauda What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Pl ...

General SKU417W1318 LocationBarneveld MakeLauda Type2ITH350/25KW Mach.No.HKS09028 Pressure Working pressure10 Bar Main Features Heating (medium)Oil Capacity59.5 KW Temp.250 °C Specified Features - Temperature control unit MaterialStainless steel Temperating machinecheck Thermal oil heatercheck Heating medium:Thermaoil ADX10 Heating capacity2x 25 kW Electric capacity59,5 kW With coolingcheck (external cooling, no cooling compressor) Temperature+20°C/+250°C Tank capacity50 l. With pumpcheck (2x) Capacity2x 1,2m³/h Motor4,0 kW 400 V, 2900 rpm (2x) With temperature controllercheck With controlcheck Information Year of construction2009 Mounted on wheelscheck With switchgearcheck Total height2,40 m CEcheck Floorspace0,70x1,20 m Weight700 kg Extra SpecificationsWith horizontal pressure vessel, volume 50 l., work pressure -1/+3 bar, test pressure 5,8 bar,  ...

General SKU394U1113 LocationBarneveld MakeLauda TypeTR 400 HK/KT-EX Mach.No.HKS08024 Pressure Working pressure16 Bar Main Features Heating (medium)Oil Capacity12.9 KW Temp.200 °C Specified Features - Temperature control unit MaterialStainless steel 1.4571 (316Ti) Heating medium:Therminol D12 Electric capacity 12.9 kW, 400 volt (ex) Temperature-40°C/+200°C With pumpcheck (2x) Capacity18m²/h Motor5,5kW, 400/690Volt, 2880rpm (EX) (2x) Information Year of construction2008 Total height2,5 m CEcheck Floorspace1,75x1,0 m Weight1800 kg ATEX compatiblecheckTemperature control unitsLaudaHeat exchangers > Temperature control unitsBrand > Lauda What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. ...

Year of construction: 2015 CNC controller: M-730UM Axes X-axis travel mm: 800 Y-axis travel mm: 530 Z-axis travel mm: 510 Distance spindle nose - table surface mm: 150-660 Feed rates m/min: 5 Rapid traverse m/min: 30 Worktable Number of pallets: 1 Table dimensions mm: 1100x600 Max. workpiece weight kg: 1000 Spindle Spindle speed rpm: 8000 Spindle drive power kW: 30/22 (25%ED/cont) Spindle torque Nm: 304 Tool system Tool holder: MAS-BT 50 Tool magazine slots: 30 With free neighboring places mm: 240 With occupied neighboring places mm: 120 Max. Tool Length mm: 350 Max tool weight kg: 20 Tool-to-tool time s: 2.34 Equipment Chip conveyor Internal cooling lubricant supply 4th axis DDRT-260X Custom Macro common variables (200) Machine running times Under power: 35896 Spindle Working: 26915 Rated power kVA: 52 Basic machine di ...

Overhauled, with hydraulic-unit, electrical motor and voith turbo coupling. Without frame

Rexroth Bosch MA4/200-7301-M Control Unit 1070079888 GA1 Robot Controller Module Item condition: Used, in perfect condition R14A1_PD(BOR) You can find more control units - new and used - in our shop! International shipping costs on request!

Key data: 3000 mm, 2500 mm, 1250 mm

Zimmermann FZ38 - 5 Axis Portal Year of construction 2005 - 2022 has been renewed for 600,000 euros, receipts from Zimmermann are enclosed X 3000 Y 2500 Z 1250, A +/- 100 straight C +/- 360 straight 2 spindle 50 kw - 24000 rpm and 44 kw -10,000 rpm Certification Linear Axes 5/m Siemens Control U….. See pictures For more information please contact us At call

General SKU428W1355 LocationBarneveld MakeGFKK TypeTKK Year of construction1998 Pressure Working pressure24 Bar Main Features Heating (medium)Ammonia Capacity22 KW Temp.160 °C Specified Features - Temperature control unit MaterialMild steel, Stainless steel Temperating machinecheck With coolingR507 / R23 Temperature-70°C/+160°C Tank capacity1,5 m3 With pumpcheck Information Mounted on framecheck With switchgearcheck Total height2,50 m CEcheck Floorspace6,0x2,5 m Extra SpecificationsWith 4x Bitzer cool compressors, type 6G-30.2 Y, volume 126,8 m3/h, 19/25 bar, : Alfa Laval plate heatexchanger, type TM10-BFM, 10 bar, volume 56,7 l., : Schmidt plate heatexchanger, type ST12-PE0085, volume 12 l., 25 bar, : 2x Textoris horizontal stainless steel tank, volume 1007 l., 1x Textoris horizontal vessel, volume 1500 l., pressure 2 bar, : 3-doors control/power cabinet ...

Properties: Volume 1000 L Material V2A (AISI 304) 1.4301 Total height 1850 mm Depth 1200 mm Width 1000 mm Cubic design Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Description MJ UNI HIGH 1000 liter tanks with two different dimensions: Height: 185 cm Width: 100 cm Depth: 120 cm Or Height: 182 cm Width: 100 cm Depth: 115 cm Topsoil: Flat bottom Filling nozzle Subsoil: Cone bottom pulled forward Remaining Schedule Tank on rack with forklift shoes

General SKU394U1134 LocationBarneveld MakeLauda TypeTR 400 HKT/KT-EX Mach.No.HKS08032 Pressure Working pressure16 Bar Main Features Heating (medium)Oil Capacity12.9 KW Temp.200 °C Specified Features - Temperature control unit MaterialStainless steel 1.4571 (316Ti) Thermal oil heaterTherminol D12 Heating medium:Oil Electric capacity12.9 kW, 400 volt (Ex) Temperature-40°C/+200°C With pumpcheck (2x) Capacity18 m³/h Motor5,5 kW, 400/690 volt, 2880 rpm (EX) (2x) Information Year of construction2008 Total height2,5 m CEcheck Floorspace1,75x1,0 m Weight1800 kg ATEX compatiblecheckTemperature control unitsLaudaHeat exchangers > Temperature control unitsBrand > Lauda What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in  ...

turning diameter: 890 mm turning length: 3000 mm turning diameter over slide rest: 550 mm control: Fagor 8055i ATC Revolver: 8 tail stock: MK 6 turning dia. in gap: 1220 mm length of gap: 450 mm spindle passage: 106 mm turning speeds: 15-1480 U/min 3-jaw chuck: 400 mm steady: 300 mm chip conveyor: The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was creat ...

turning diameter: 475 mm turning length: 1500 mm control: Fagor 8055T Revolver: 8 turning diameter over slide: 240 mm turning dia. in gap: 710 mm length of gap: 350 mm spindle passage: 51 mm turning speeds: 100-4500 U/min Power: 7/11 KW 3-jaw chuck: 250 mm steady: 230 mm The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the softw ...

turning diameter over bed: 600 mm turning diameter over slide rest: 400 mm turning length: 2000 mm hollow: 82 mm turning diameter: 600 mm turning dia. in gap: 800 mm length of gap: 400 mm turning speeds: 2000 U/min 3-jaw chuck: 250 mm steady: 210 mm with live steady: 200 mm Holder Multifix: coolant: The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was cr ...

32 pieces of used storage bins, External dimensions W = 40, L = 60, H = 28 cm

1 new conductance meter Fabr. PRO MINENT, Dulcometer Series No. TN 2001062623 230 V AC, 50/60 Hz

Key data: 560 mm, 410 mm, 450 mm

YCM Supermax YCM-56 T X-560 mm Y-410 mmZ-450 mm 4 and 5 axis Control: Fanuc MXP 200i Table 700X420 mm Works flawlessly Location: CH

Mazatrol Matrix Control Travel X-axis: 630 mm Y-axis: 765 mm Z-axis: 510 mm A-axis: +30°/-120° C-axis: 360° Max. distance from spindle nose to table top edge (table horizontal): 740 mm Min. distance between spindle nose and top of the table (table horizontally): 230 mm Max. distance from spindle nose to table center (vertical): 690 mm Min. distance from spindle nose to table center (vertical): 180 mm Max. table load: 500 kg Max. workpiece diameter: 730 mm Max. workpiece height: 500 mm Pallet Changer – Mazak Palletech System 6-fold pallet changer Pallet size: 500 x 500 mm Milling spindle SK-40 Max. spindle speed: 12,000 rpm Drive power milling spindle: 22Kw Tool magazine Number of tool positions: 120 Other equipment • 5-axis simultaneous machining • Synchronized tapping • Rapid traverse constant angle of inclination when moving 3D coordinate conversio ...

Converters Frequency Converters, Frequency Converters, Drive Inverters -Manufacturer: Himmel Tübingen -Type: 2GL 132/175-1.JPG 132/240 -TUmformer No.: 393 733 A 12 -Input: 380V 50Hz -Output: 165V 300Hz -Power: 11 KW -Dimensions: L950/D440/H340 mm

Demag 60 ton x 24 100 mm Kind of: overhead travelling crane Capacity: 60 ton Span: 24 100 mm Drop: 23 meter Tackle speed: 1 & 4 m/min Rotationspeed: 12,8 & 50 m/min Displacementspeed: 8 & 92 m/min Numbre of riggers : double rigger

workpiece length: 3000 mm roll diameter: 50 mm work piece width: 300 mm Roll lenght: 210 mm Height: 800 bis 1100 mm No. - Rolls: 12 dimensions of the machine ca.: 3 x 0,33 x 0,55 m Lightly used discharge roller conveyor with fold-up stop and measuring scale. Machine dealer with own stock of 2500 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.