air con used for sale

Recooler, water cooler, dry air cooler Make LU-VE Contardo with 12 fans and water spraying system Power 800 to 1000 KW. depending on inlet/outlet temperature 4 units in stock

1 GIDUE continuous label printing machine type CONCORDE 2/80, year 1988, roller width 100 mm, maximal label width 80 mm roll unwinder, 2 x rotary die stations (1 front and 1 reverse of the label), dryer, roll rewinder

1 GIDUE continuous label printing machine type CONCORDE 4/80, year 1997, roller width 100 mm, maximal label width 80 mm roll unwinder, 4 x rotary die stations (2 front and 2 reverse of the label), dryer, roll rewinder

Miwe condo deck oven  Type: CO 3.0806  Specifications: 3 tiers 80×60 cm sheets Stainless steel cladding in black lacquered digital control Year of construction: 2016 with extractor hood  with lower tray for 60x40cm sheets mobile on castors Specifications:  400 / 230V 3/N/PE 50 Hz / 117.3 kW Dimensions:  Height: 210 cm Width: 100 cm Depth: 100 cm

condenser, condenser, each approx. 158/30/56 cm, 31.1 kW, approx. 33 kg each, filled with nitrogen, designed for railway technology, packed in welding foil, 4 pieces per pallet

Deck oven electric Miwe Condo CO 5.1208 used all-purpose oven stone slabs oven electric from Miwe Model Condo CO 5.1208 from year of construction 2013 tested and cleaned in stock immediately available for sale. The oven is with 5 shelves each 120x80cm with exhaust hood including steam condenser and proofing cabinet. - 5 tiers each 120x80cm - Each floor with Miwe FP control - each floor can be controlled separately - Top and bottom heat separately adjustable - each floor with separate steam function - with proofing cabinet - with steam condenser - with exhaust hood - Floor entrance height 17cm, interior height 16cm - Power: 49.1 kW - Built in 2013 External dimensions Width: 150cm Depth without hood: 132cm with hood +40cm Height without hood: 238cm with hood +20cm

Multi-knife mill with 16-blade rotor 6 stator knives Drive 90 kW With accessories

Multi-knife mill with 16-blade rotor 6 stator knives Drive 90 kW With accessories

Multi-knife mill with 16-blade rotor 6 stator knives Drive 90 kW With accessories

MAPPACK Conpax Servo Wrap Packaging Machine Foil Packaging

FORMING, GLUING AND BREADING LINE, KOPPENS + MULTIFORCE CONTRACT LIMITED Technical description: Forming machine Koppens, type: VM 400-HS Dimensions: 2100 x 800 x 2080 mm Gluing machine Koppens, type: ER 400 Dimensions: 1435 x 815 x 1620 mm Breading machine Koppens, type: PR 400 Dimensions: 2470 x 670 x 2050 mm Gluing machine Mutliforce Contract Limited Dimensions: 1100 x 600 x 1670 mm

Inlet opening: approx. 500 x 1000 mm Rotor width: approx. 1000 mm Rotor diameter: approx. 500 mm Stator knives: 3 Rotor blades: 6 x 3 With base frame Feed opening: approx. 500 x 1000 mm Rotor width: approx. 1000 mm Rotor diameter: approx. 500 mm Stator knives: 3 Rotor knives: 6 x 3 With base frame

Inlet opening: approx. 500 x 1000 mm Rotor width: approx. 1000 mm Rotor diameter: approx. 500 mm Stator knives: 3 Rotor blades: 6 x 3 With base frame Feed opening: approx. 500 x 1000 mm Rotor width: approx. 1000 mm Rotor diameter: approx. 500 mm Stator knives: 3 Rotor knives: 6 x 3 With base frame

Stick electrodes 2.5 x 350 -Type: CONARC 49 C -Price: per package -Number: 3 packages -Weight per package: 2.6 kg

Kitzinger crate dishwasher / instantaneous dishwasher - Type: Contino 400NDB1 - Year of construction: 2007 - Bandwidth approx. 70cm - Height entrance: 53cm - Total length: 685cm

Double bench grinder, bench grinder, column grinder, column grinder, drill bench grinder -grinding wheel: max. Ø 180 x 20 mm -Speed: 2850 rpm -Motor power: 1.1 kW -Operating voltage: 380 volts -Dimensions: 500/560/H1220 mm -Weight: 110 kg

Boxes Flow-through dishwasher Kitzinger Contino CWS802 -Boxes dishwasher -Scrolling machine -48 kW -Year of construction: 2012

Foil cutting mill Propulsion : 30 KW Voltage : 400 V / 3 ~ / 50 Hz

Deutz TCD 6.1 L6 engine Miretti Ex conversion diesel trolley mining

KRONES CONTIPACK A1 Extractor Capacity: 4,200 crates/h Heads: 5 R - L machine Ma-No. 23-0636009 LxWxH: 5000 mm x 2410 mm x 2850 mm Weight: 1.000Kg KRONES CONTIPACK A1 Unpacker Capacity: 4.200 crates/h Heads: 5 R - L machine Ma-No. 23-0636009 LxWxH: 5000 mm x 2410 mm x 2850 mm Weight: 1.000Kg

Stock # U2423-1 Used stainless steel conical nauta type powder mixer by Pharming type HV 1000 (CZ). Cone has diameter 1550 mm x height 2200 mm. Total volume of tank about 1700 l, working volume up to 1000 l. Total height 324 cm. Standard mixing screw is top driven by el. motor 3 kW, 970 rpm, 230-400 V, 50 hz, and supported by bottom pintle bearing. Arm rotation - 2 rpm. Screw rotation - 60 rpm. Discharge via bottom rotary slide outlet valve, operated manually. Mixer is mounted on 3 lugs with carbon steel supports. Included technical documentation. Shipping dimensions: length 330 cm x diameter 170 cm x weight approx 1000 kg. Machine had been working in food industry.

Stock# U2423-2 Used stainless steel conical nauta type powder mixer by Pharming type HV 600 (CZ). Cone has diameter 1440 mm x height 1855 mm. Total volume of tank about 1300 l, working volume up to 600 l. Total height 2770 mm. Standard mixing screw is top driven by el. motor 3 kW, 965 rpm, 230-400 V, 50 hz, and supported by bottom pintle bearing. Arm rotation - 2 rpm. Screw rotation - 60 rpm. Discharge via bottom rotary slide outlet valve, operated manually. Mixer is mounted on 3 lugs with carbon steel supports. Included technical documentation. Shipping dimensions: length 277 cm x diameter 180 cm x weight 600 kg. Machine had been working in food industry.

Continuous Butter Churn Complete plant with PHE , controls, butter milk pump, tanks . Condition Good condition . Contact us for more information.

Continuous Butter Churn Complete plant with PHE , controls, butter milk pump, tanks . Condition Good condition . Contact us for more information.

Conrad Engelke 3m diam. x 2.2m long Autoclave Steam operation Design pressure 7bar Design temp 169deg C Volume 19m3 Length of rotating steel tube 1320mm With new Control Panel Complete with full documentation

Continuous Mixer (UP1) Manuf.: Pomini Farrel Year 1982 Model: 9LCM 230 + Extruder 12” Diam. 230/304mm L/D ratio: 14:1 Speed (rpm) 80 / 447 (LCM) Power (kW): Extruder: 300kW LCM: 900kW Continuous Mixer (UP2) Manuf.: Pomini Farrel Year 1986 Model: 9LCM 230 + Extruder 12” Diam. 230/304mm L/D ratio: 14:1 Speed (rpm) 80 / 447 (LCM) Power (kW): Extruder: 300kW LCM: 900kW

Dry agent mill Manafacturer: Condux Item no.: 5988 Type: CUM 100 Year of construction: 1992 Power: 1.1 kW with hopper(diameter 330 mm, height: 400 mm) with control cabinet, cable & plug on mobile frame (castors attached) LWH: 850 x 550 x 1550 mm

Function generator, oscilloscope -Frequency range: 0.2 Hz to 240 kHz -Dimensions: 225/225/H85 mm -Weight: 1.2 kg

saw blade diameter: 300x32x2,5 mm capacity 90 degrees: round: 10-90 mm capacity 90 degrees: flat: 80x10-80 mm : 10-40 mm : 10-40 mm : 40x10-40 mm capacity 90 degrees: square: 10-80 mm weight of the machine ca.: 600 kg dimensions of the machine ca.: 2590x1910x1910 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

PTC thermistor relay, contactor, semiconductor contactor, contactor -Type: PLC-BSC-24DC/21-21 -Number: 10x relays available -Price: per piece -Weight: 0.07 kg

Powder disperser Manafacturer: Ystral Type: C18.500 S EXD / Conti-TDS-3 in Ex version Year: 2003 Power: 18.5 kW Engine number: 426634001H on a mobile frame Condition: as good as new with two powder inlets LWH: 1500 x 600 x 1100

electric motor, three-phase motor -Power: 1.5 kW -Speed: 1400 rpm -Shaft: Ø 24 mm -double shaft output -Design: B3 -Protection rating: IP33 -Dimensions: 370/250/H190 mm -Weight: 16 kg

hydraulic lockbolt rivet gun, rivet gun, blind rivet gun -hydraulic lockbolt rivet gun -without: storage container -incl.: hydraulic unit and control -Dimensions: 1230/800/H1300 mm -Weight: 450 kg

Three-phase motor, electric motor -Transfer in current condition as seen -Foot defective, see photo -Power: 7.5 kW -Speed: 1430 rpm -Shaft: Ø 38 mm -Construction: B3 -Protection class: - -Dimensions: 510/370/H340 mm -Weight: 110 kg

electric motor, three-phase motor -Power: 1.5 kW -Speed: 1410 rpm -Shaft: Ø 22 mm x 60 mm -Design: B5 -Protection class: - -Flange diameter: 254 mm -Recess diameter: 180 mm -Dimensions: 380/305/H250 mm -Weight: 32 kg

Three-phase motor, electric motor -Power: 5.5 kW -Speed: 1425 rpm -Shaft: Ø 28 mm -Design: B3 -Protection rating: - Quantity: 1 piece available -Dimensions: 420/320/H290 mm -Weight: 54 kg

Three-phase motor, electric motor -Power: 5.2 kW -Speed: 1440 rpm -Shaft: Ø 38 mm -Construction: B3 -Protection class: - -Price: per piece -Number: 1x available -Dimensions: 450/340/H270 mm -Weight: 65 kg

Laboratory power supply, power supply unit, voltage generator, laboratory power supply device -Input: 230 volts -Output: 100-415 volts -Dimensions: 320/170/H130 mm -Weight: 3.2 kg

Timing relay, relay, heating current monitoring, contactor, semiconductor contactor, contactor -Manufacturer: Lincoln -Type: Control 84513 -Number: 1x relay available -Price: per piece -Dimensions: -Weight: 0.9 kg

InterBus-S, bus coupler -Manufacturer: Phoenix Contact, Interbus -Type: IB STME 24 DO 32/2 Ord.No. 2754370 -Number: 11x available -Price per piece -Dimension: 120/115/H115 mm -Weight: 0.7 kg/pc.

InterBus-S, bus coupler, Interbus -Manufacturer: Phoenix Contact, Interbus -Type: IB STME 24 BDO 16/3 Ord.No. 2751700 -Price per piece -Number: 16x available -Dimension: 120/115/H115 mm -Weight: 0.7 kg/pc.

InterBus-S, bus coupler, Interbus Manufacturer: Phoenix Contact -Type: IB STME 24 BDI 16/4 -Number: 75x available Price: per piece -Dimensions: 120/115/H115 mm -Weight: 0.7 kg/pc.

InterBus-S, bus coupler, bus terminal, bus terminal -Manufacturer: Phoenix Contact, Interbus-S Bus Terminal -Type: IBS ST 24 BKM-T Ord.No. 27 50 154 -Price: per piece -Number: 17 modules available -Dimensions: 115/45/H115 mm -Weight: 0.2 kg/pc.

Pneumatic pressure switches Type: MDR2/11 -Number: 7x pneumatic pressure switches available Price: per piece -Weight: 0.3 kg

centrifugal pump, water pump, stainless steel pump, food pump -Manufacturer: Hilge, stainless steel centrifugal pump -Type: Contra I/3 AD-V 25/25/1.5/2 -Motor: Siemens 1.50 kW / 2860 rpm -Inlet/outlet pipe connection DN25 -Dimensions: 715/215/H265 mm -Weight: 37 kg

InterBus-S, bus coupler, Interbus -Manufacturer: Phoenix Contact, bus coupler -Type: IIBS ST 24 BK LB-T Ord.No. 2753232 -Price: per piece -Number: 3 modules available -Dimensions: 120/80/H110 mm -Weight: 0.5 kg/pc.

Connector, plug, sensor module -Manufacturer: Phoenix Contact, Y-distributor 5 pieces ovp -Type: SAC-3P-M12Y/2XM12FS PE -Screw lock: M12 -Price/delivery: complete -Dimensions cardboard: 115/80/H30 mm -Weight: 0.1 kg

Tires, solid rubber tires, forklift tires -Manufacturer: Continental, solid rubber tires CSE-Robust SC 15 from GSL aerial work platform -Tire size: 5.00-8/3.00 -Bolt circle: Ø 110 x 15 mm -Inner diameter: 67 mm -Quantity: 1 piece -Dimensions: Ø 460 x 125 mm -Weight: 20 kg

pressure sensor, pressure transmitter, pressure transmitter, pressure switch, -Manufacturer: Huba control, pressure transmitter type 691.9300071D orig -Input: 0... 10 bar -Pressure: max. 20 bar -Number: 3x transmitter available -Price per piece -Cardboard dimensions: 140/70/H45 mm -Weight: 0.3 kg/pc.

Industrial Ethernet Switch, Network Switch, Lan Switch, Rail Switch, FL Switch -Manufacturer: Phoenix Contact, FL Switch Industrial Ethernet Switch -Type: SFN 5TX -Order No.: 2891152 -Voltage: 24VDC -Dimensions: 130/75/H30 mm -Weight: 0.3 kg