air compressor ga used for sale

with inlay cushions and coffee table, unused Auction-ID: A1-40418-143

Galvanized steel construction with IPE 140 profiles and impregnated purlins Specifications: Steel Profile: Galvanized IPE 140 Steel profile dimensions: 140 × 75 mm Purlin dimensions: 4495 × 70 × 190 mm Length of center-to-center trusses: 4.5 meters Width: 8.6 meters Ridge height: 3.6 meters Gutter height: 2.0 meters Surface area per truss section: ± 38.7 m² Features: Galvanized IPE 140 Steel Profiles Purlins , impregnated Particularities: A forklift with driver is available during the collection day Photos of the assembled structure are for illustrative purposes Auction-ID: A1-40111-109

Kibani Cordless Hedge Trimmer XXL – 45 cm Blade length - 230V - Telescopic, adjustable height from 190 to 250 cm, working angle from -60° to +80°. unused. Brushcutter/ grass trimmer on battery. incl battery 20 volt and charger Auction-ID: A1-40418-136

package double rods panels Heras, unused, 600mm high, 2500mm long, 8/6/8mm, hot-dip galvanized, unused Auction-ID: A1-40418-412

Water pump with petrol engine. unused 30M3/hour Auction-ID: A1-40418-320

Indoor/outdoor installation Power 35 kW Rated power at full load at 80/60 °C - 31.1/34.0 kW Rated power at full load at 50/30 °C - 34.9 kW Auction-ID: A7-46479-56

Garage jack 4 ton ultra low, lifting height 80-465mm, unused in box Auction-ID: A1-40418-236

Auction-ID: A1-46501-2667

Seat height 44-52 cm Height 128 cm Rotatable 360 degrees Material Seat PU leather Max. Load 150 kg Weight 12 kg Auction-ID: A1-40418-189

Indoor/outdoor installation Power 35 kW Rated power at full load at 80/60 °C - 31.1/34.0 kW Rated power at full load at 50/30 °C - 34.9 kW Auction-ID: A7-46479-57

Equipped with: New Garmech tipping trailer, capacity of 2.5t, adjustable tow bar, jockey wheel, side panels with closed profile tubes, bulkheads can be disassembled, tailgate with top and bottom hinge. Auction-ID: A1-40137-187

Category 2 Hitch, Pitonfix and Upper Pull Bar, PTO 540 / 540E Auction-ID: A1-40137-56

Chassis number: AGCHEM2201377, Equipped with: Cummins 6CTA diesel (6-cylinder), Capacity: 8.3 litre, Power: ±240 hp, central lubrication, manual, without registration, 3mdouble-acting valves, rear linkage, hour reading: 6345. Auction-ID: A1-40137-73

Slide size 475x130 mm Slide stroke 100 mm Shots per minute 10-50 Max mould height 400 mm Worktop size 800x570 mm DISMANTLING AND LOADING COST: EURO XXXXXXXXXX The cost does not include any disposal of the oils present in the system, this will be invoiced during disassembly Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-45789-6

Roller motor with electronics for sliding gate, unused in box incl accessories Auction-ID: A1-40418-428

Chassis number: W0E4X2E012065, 2.9 kw. Fully electric, new batteries, loading height 650 mm, hour position: 1591, towbar Auction-ID: A1-40137-72

Water pump with petrol engine. unused 30M3/hour Auction-ID: A1-40418-99

min height 14cm, max height 41cm, unused Auction-ID: A1-40418-429

round 8cm, 200cm long, unused will be delivered as a package Auction-ID: A1-40418-452

min height 14cm, max height 41cm, unused Auction-ID: A1-40418-387

Unused fencing galvanized height 243cm length 250cm. Wire rod thickness 8mmx6mmx8mm extra heavy. Total weight package 1490kg Auction-ID: A1-40418-406

Roller motor with electronics for sliding gate, unused in box incl accessories Auction-ID: A1-40418-427

Bosch Professional 18V GAL 18V6 80 Battery charger for 6 batteries Auction-ID: A1-46501-643

Slide size 810x610 mm Slide stroke 550 mm Worktop size 810x610 mm DISMANTLING AND LOADING COST: EURO XXXXXXXXXX The cost does not include any disposal of the oils present in the system, this will be invoiced during disassembly Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-45789-17

Roller motor with electronics for sliding gate, unused in box incl accessories Auction-ID: A1-40418-426

Garage jack 4 ton ultra low, lifting height 80-465mm, unused in box Auction-ID: A1-40418-115

Pneumatically driven hydraulic jack with 30 ton lifting capacity, incl adapters. in box Auction-ID: A1-40418-195

Suitable for petrol; refueling nozzle; hand pump; Auction-ID: A1-40137-352

round 8cm, 100 cm long, unused will be delivered as a package Auction-ID: A1-40418-454

Roller motor with electronics for sliding gate, unused in box incl accessories Auction-ID: A1-40418-444

qty 29 pcs Auction-ID: A7-46448-59

Auer Box with spare parts for pneumatic gate valves (extraction system) Various cylinders, connectors, valves, hose and mechanical gate valve Auction-ID: A1-46501-3106

Water pump with petrol engine. unused 30M3/hour Auction-ID: A1-40418-422

Year of manufacture 2000, 6.6 kw, petrol, 145 kg, serial number: 500335, 1st gear does not work, working. Auction-ID: A1-40137-266

55 mats with 23 poles; size 2500x1630 mm; mesh size 50x200 mm; transport dimensions approximately 2500x1630x1300 mm; without fasteners; thickness 6/5/6 mm unused Please note max 23 poles 250cm length Auction-ID: A1-40418-409

Equipped with: working width (cm) 154, number of blades3, L/min 50, dimensions (cm) 158 x 137 x 66, weight (kg) 245, ejection over the entire width, height-adjustable castors, Giant suspension Auction-ID: A1-40137-279

Unused fencing galvanized height 243cm length 250cm. Wire rod thickness 8mmx6mmx8mm extra heavy. Total weight package 1490kg Auction-ID: A1-40418-413

Around 6cm, 250cm long, unused Comes as a package Auction-ID: A1-40418-451

Kibani Battery Hedge Trimmer – Includes 2000mAh li-ion battery – 51 cm Blade length - 18V Kibani Grass Trimmer on battery - Includes 2000mAh li-ion battery - charger and extra cord - 18V Kibani Leaf Blower on battery - Includes 2000mAh li-ion battery - with charger - 18V Auction-ID: A1-40418-254

Indoor/outdoor installation Power 35 kW Rated power at full load at 80/60 °C - 31.1/34.0 kW Rated power at full load at 50/30 °C - 34.9 kW Auction-ID: A7-46479-60

Equipped with \"Loncin\" petrol engine; additional wheel set; 1 scissor plough; Working width 48 cm; Auction-ID: A1-40137-345

Pneumatically driven hydraulic jack with 30 ton lifting capacity, incl adapters. in box Auction-ID: A1-40418-116

Roller motor with electronics for sliding gate, unused in box incl accessories Auction-ID: A1-40418-425

Pneumatically driven hydraulic jack with 30 ton lifting capacity, incl adapters. in box Auction-ID: A1-40418-237

Around 6cm, 180cm long, unused Comes as a package Auction-ID: A1-40418-449

Moisture meter GANN Hydromat well filled, case

Payload: 250 kg 2-step speed Length: 4 m Auction-ID: A1-46607-71

Tool trolley with: 46 x Various HSK-63A mounts Auction-ID: A1-46607-59

General description Comprehensive industrial metrology and quality control equipment set including precision gauges, measuring instruments, and comparator systems. Suitable for inspection, calibration, and production quality assurance. Technical details Type: Metrology equipment set Brands: Mitutoyo, STOTZ, and various Main contents: - Gauge pin / plug gauge sets (precision tolerance approx. ±0.003 mm) - Mitutoyo digital height gauges (0–300 mm) - Dial indicators (analog) - Comparator stands and measuring columns - Internal micrometer gauges (inside measurement tools) - Gauge block (slip gauge) sets in wooden cases - STOTZ comparator units (mechanical/pneumatic type) - Precision measuring pins and inspection tooling Application: Dimensional inspection, calibration, and process control in machining and industrial environments Equipment - Gauge pin sets in wooden ca ...

Precision Gauges – Assorted Set General data: Equipment type: Precision gauges and measuring tools Condition: Used Included items: Plug gauges (Go/No-Go type, double-ended) Thread gauges / ring gauges (disc-shaped, metric threads) Large diameter gauges Precision pins / micro gauges for fine tolerances Technical details: Clearly marked tolerances (e.g. 28 ±0.02, 30 H8, etc.) Designed for high-precision measurement and verification Description: Set of precision gauges used for dimensional control and quality inspection in machining and manufacturing environments. Includes various plug gauges, thread gauges, and micro gauges suitable for checking tolerances, diameters, and threads with high accuracy. Auction-ID: A7-46498-53