air compressor ga used for sale

Machine type: MIG/MAG welding system Make MERKLE Type OptiMIG 351 DW Plant no.: 129.187 Connection voltage 3 x 400 Volt Adjustment range 25 - 350 amps Duty cycle 60% ED at 350 amps 100% ED at 300 amps Current Adjustment 28 Switching Levels Cooling transformer by built-in fan Cooling burner water-cooled Design of mobile industrial plant with separate DV case Wire Feed Gearbox 4-Roller Gearbox DV 26 Fuse protection 32 amps Dimensions L x W x H 990 x 510 x 1,135 mm Weight 210 kg Optional Accessories Volt and Ampere Digital Display Automatic wiring Age 24 months Condition workshop-tested, like new, incl. UVV workshop test report Scope of delivery welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece of ground cable 4 mtr. long, 70 sq mm 1 piece of pressure reducer argon with 2 pressure gauges 1  ...

Shock absorber, gas spring, shock absorber, start-up damper -Pipe: Ø 82 mm -Total length: 510 mm -Hole diameter: Ø 24 mm -Number: 2 shock absorbers available Price: per piece -Dimensions: 82/82/H510 mm -Weight: 11.5 kg/piece

Anchor system DW 15 Nut joint plate new, galvanized = 6,90 EUR/piece Prestressing steel DW15,0,85m = 4,20 EUR/piece Prestressing steel DW15,1,00m = 4,80EUR/piece German product manufactured according to DIN with manufacturer's warranty All prices excl. VAT and transport Subject to clearance Company SFS Andreas Becker e. Kfm., Tel. 07305/9562350, Fax. 07305/9562352 , VAT NUMBER: DE279047055 Office/ warehouse address: Birkenstraße 15 89185 Humlangen- Hüttisheim E-Mail: SFsystemst-Online Mobile: 0049 176 70044689 Mr. Becker Registry Court Ulm: HRA722943

Shock absorbers, gas pressure springs, shock absorbers, start-up dampers, impact absorbers -Shaft: Ø 39 mm -Shaft length: 470 mm -Recording hole: Ø 17 mm -Number: 4 pieces of shock absorbers available -Price: per piece -Dimensions: 1755/140/H100 mm -Weight: 24 kg/piece

overhauled Leybold DK200 gate valve pump. Immediately available. 6 months warranty.

Force measuring device, force measuring device, calibration, force measuring technology, load cell -Manufacturer: Johann Rein -Type: 1Mp -Dimensions: 190/290/H130 mm -Weight: 4.5 kg

Key data: 75 t

Specifications: Capacity 75 tons Stroke rate 90 strokes Projection 300 mm Plunger stroke 16 - 140 mm Plunger adjustment 80 mm Table size approx. 800 x 600 mm Installation height max. approx. 400 mm

Remote control for inert gas welding device, inert gas device, welding rectifier, hand controller -Remote control -Manufacturer: unknown -Type: Poti -Number: 1x controls available -Price: per piece -Dimensions: 155/105/H130 mm -Weight: 2.7 kg

Used packaging machine by Multivac type R 245. New 2010. Packaging machine: - produces vacuum and aerated packaging from deep-drawn and sealable bottom soft or thick film, combined with sealable top film. - has two packaging formats : 250g cube with pack size 145x92.25x approx. 40 mm 500÷600g cube with pack size 188.5x145x approx. 40 mm Power supply 400 V / 50 HZ 3/PE AC phases Rated power 15 kW Nominal current 39 A Max. precharge 50 A

Fives Pillard Gas Burner GRC-G3 Burner from 2015. 19.75 MW x 21,000 m3/h. Manufacturer: Fives Pillard Model No.: GRC-G3 Type: Gas Burner Serial Number: 205991C3 / 205991C3 Heat output [MW]: 2.82 – 19.75 Air flow rate [m3/h]: 3,600 – 21,000 Year of construction: 2015 Hours:– Weight [kg]: 610

2 x MTU 20V4000L63 complete power plant for sale 2 x 20V4000L63 generating sets total Each genset is 220 Kw at 1500 RPM total about 4.4 Mw with Stamford alternators system is 50 Hz and 2800 Kva Running hours are 20.000 and 30.000. respectively Gen sets year of manufacture is 2010

Solenoid valve, butterfly valve, flap valve, solenoid valve, solenoid valve, solenoid gas valve, gas solenoid valve, double gas valve, gas valve -Manufacturer: Siemens, double gas valve -Type: VGD40.065 -Connection: DN65 -Pmax .: 700 mbar -Dimensions: 285/190 / H210 mm -Weight: 8.3 kg

Solenoid valve, butterfly valve, flap valve, solenoid valve, solenoid valve, solenoid gas valve, gas solenoid valve, double gas valve, gas valve -Manufacturer: Siemens, double gas valve -Type: VGD40.040 -Connection: DN40 -Pmax .: 1000 mbar -Dimension: 235/170 / H195 mm -Weight: 6.9 kg

Spiral wound gasket, labyrinth body gasket, flange gasket, high pressure gasket -Manufacturer: Frenzelit, flat gasket Novatec Premium -External: O 162 mm -Inside: O 116 mm -Thickness: 2mm -Number: 107x seal available -Price per piece -Minimum purchase: 10 pieces -Weight: 0.05 kg/pc.

Height gauge, parallel gauge, height measuring device -Manufacturer: Mitutoyo, Height Gauge Type HS-100 -Max. working height: 1000 mm -Dimensions: 250/155/H1340 mm -Weight: 15.6 kg

Key data: 3155 , 10500

Make and Model: Rolls Royce KVSG 18 G4 The engine is from 1994. It had a full rebuild in 2004. Fuel: Natural Gas Capacity: 3155kW Hours: 63,000 HZ: 50 V: 10500 Scope of Supply: Engine, Alternator, Base frame, Acoustic Container, Exhaust Gas Heat Exchanger, Control panel and synchronisation panels. Please note: circuit breaker and transformers are not included. Price: €200,000 Available for sale from Gas Engine Exchange . Please check our complete range of equipment at gasengineexchange.com.

Disc valve, flapper valve, ball valve, butterfly valve, gate valve, gate valve, gate valve, sleeve valve -Gate valve: stainless steel sleeve valve type 2 CF8M 200 unused -Size: DN50 PN16 -Number: 15x sliders available -Price per piece -Dimensions: 100/100/H215 mm -Weight: 2 kg/pc.

TAURUS 70 Gas Turbine Year Of Make: 2004 Total running hours: 58.000h Total hours since last overhaul 28.600h Turbine 15158 RPM 60 HZ / 15143 RPM 50 HZ Alternator 1500 RPM 50 HZ 7200 Kw at 9000 KVa 11000 Volts

Spiral wound gasket, labyrinth body gasket, flange gasket -Spiral seal: Flange seal according to DIN EN 12560-2 5 pieces/package -Type: 2 1/2 150lbs 1.4404/PTFE -Dimension: Ø124 x 2mm -Price: complete -Total weight: 0.7 kg

Manometer, test manometer, Bourdon tube pressure gauge, pressure-temperature measuring technology, contact manometer -Manufacturer: Wika, Manometer Pressure gauge with contact device -Type: 233.50.100 Kont 821.1 16 bar -Screw connection: see photos -Dimensions: 160/130/H120 mm -Weight: 1.3 kg

Manometer, test manometer, manometer glass, cover glass -Manometer glass: cover glass Ø97 mm 6 pieces -Thickness: 4mm -Price/delivery: complete -Dimension: Ø97 x 4mm -Weight: 0.1 kg/pc.

Galvanized scaffolding, uprights and cross braces 65 pieces height = 2.00 m, 15 pcs H = 1.13 m, 20 pcs H = 1.05 m, no shelves available

Gauge block, gauge blocks, gauge block holders -Manufacturer: Koba, End gauge holder with quick adjustment -Type: 100-200 -Dimensions: 105/70/H325 mm -Weight: 1.3 kg

Nicotra Gebhardt ZDS 20-0071 Pedestal Silencer Pedestal silencer for inlet side sound attenuation of roof fans Manufacturer: Nicotra Gebhardt Type: ZDS 20-0071 Pedestal silencer Flat roof plinth galvanized steel sheet More items - new and used - can be found in our shop! International shipping costs on request!.

Steering cabin for gate, suspended movable Stock No.: aso879 Make: Möhringer Year of construction: 1994 Machine number: M9401 Dimensions: Width: 2.80 (m) Depth: 1.70 (m) Height 1.90 (m)

Properties: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packaged Passage flap / retractable gate / hinged element Manufacturer: Interroll Condition: Good (Used) Model: Casters - with drive Total width incl. feet: approx. 890 mm Conveyor width: approx. 660 mm Total length: approx. 1300 mm Minimum height of the upper edge of the roll: approx. 700 mm Wheelbase: approx. 75 mm Roll diameter: approx. 50 mm Including 24 V motor Stock: 12 pieces Price per piece The conveyor system has run until it was dismantled. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined conveyors or telescopes for loading ...

Transnorm belt conveyor belt conveyor 1252-600-500 gate passage RA2049 The Transnorm belt conveyor is from 1999 and in a good (used) condition. It is perfect as a feeder belt and has a Van der Graaf brand motor. Supports are not included in the delivery. These are available as an option. Technical data: Manufacturer: Transnorm Year of manufacture: 1999 Condition: good (used) Motor: fully functional conveying length (FL): 1251 mm nominal/outer width (NB): 600 mm 735 with barings belt width (GB): 500 mm overall height (BH): 85 mm motor height (MH): 110 mm Motor type: Van der Graaf drum motor Motor power: kW 0.25 230/400 V 50Hz Conveying speed: 1,25 m/s Scope of delivery: without supports (if required, please ask) Optional: Supports with dempers Sideguides Frequency converter We can also extend the conveyor to your needed dimension Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co.  ...

GE LM 2500 gas turbines 2 pcs available Power:24.000 Hp each Average working hours 1700 hours

AVAILABLE COMPLETE CHP JANBACHER 616 - Yeard 2010 With 2500kva transformer Exchanger - CHP - PANEL - complete .

Perkin Elmer HS 40, Headspace sampler for 40 vials, max. temperature + 210 Celsius, min. +35 Celsius, fits all gas chromator graphs,

Agilent 5975C inert MSD with GC 6890N Agilent 5975 C inert MSD, Agilent GC 6890 N Pfeiffer Turbomolecular Pump, Electronic Ionization/EI ; GC Injector Split/splitless, EPC, LAN Agilent Backing Pump, Software Agilent MSD Chemstation for Win10

Specifications: Press force adjustable 10 – 100 kN Projection 210 mm Table size W x D approx. 500 x 400 mm Installation height with/without clamping plate 300 mm Stroke 100 mm

Specifications: Capacity 50 tons Stroke rates 115 rpm Projection 250 mm Plunger stroke 8 - 120 mm Plunger adjustment approx. 70 mm Table , WxD approx. 650 x 500 mm Diarrhoea och approx. 250 x 180 mm

Lever gauge, dial gauge, probe, probe -Manufacturer: Rekord, dial gauge weight -Measurement range: 0 - 250 kg -Dimensions case: 160/80/H35 mm -Weight: 0.4 kg

Key data: 1067 KW

we are looking for a Jenbacher 3 1067 kw we have a biogas plant

Key data: 1950 , 2437 , 11000

Cat 3520C Gas gensets Power 1950 Kw / 2437 kVA Frequency: 50 Hz Year: 2007 20 pcs available 55.000 Working hours average

Transnorm belt conveyor belt conveyor 1300-700-600 gate passage RA2234 Technical data: Manufacturer: Transnorm Year of manufacture: 2001 Condition: good (used) Motor: fully functional conveying length (FL): 1300 mm nominal/outer width (NB): 700 mm 900 with barings and Motor belt width (GB): 600 mm overall height (BH): 85 mm motor height (MH): 450 mm Motor type: SEW geardrive, W20DT63L4 Motor power: kW 0,25 230/400 V 50Hz Conveying speed: contact us Scope of delivery: one support Optional: Sideguides Frequency converter We can also extend the conveyor to your needed dimension Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 2001 condition: good (used) Conveying length in mm: 1300 Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive KW: 0,25/S1 Conveyor speed m / s: bitte Kontaktieren scop ...

RA1787 SLP depth supports / depth bar, galvanized, L = 1.100mm Support of the pallet center runner for transverse storage. 2 pieces required per pallet storage location. Also suitable for storage of skeleton containers. More than 100 pieces in stock - please ask for the required quantity! Price net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Inert gas welding machine, arc welding system, MIG/MAG welding system -Manufacturer: Ess, inert gas welding machine MIG-MAG 520-2 MW -Type: 520-2MW -Max. Welding power: 500 A -Water cooled -Wire feed case: ESS DVK 17 -Dimensions: 1160/500/H1220 mm -Weight: 379 kg

Inert gas welding machine, arc welding system, MIG/MAG welding system -Manufacturer: Ess, inert gas welding machine MIG-MAG type 310 MW -Max. Welding power: 310 A -Water cooled -Wire feeder: ESS PS 12-8 -Accessories: including hose package, ground cable -Dimensions: 1020/480/H910 mm -Weight: 208 kg

Key data: 9700 , 11000

Wartsila 20V34SG complete Gas Power plant 9.7 MW 50 Hz 11K Volts Year of make 2011 45.000 Working Hours Maintanence done regularly by wartsila 20V34SG engine with all auxilaries: ABB AMG 1120LT08 Alternator, compressors, Lt Ht water tanks, LV MV HV step up Transformers, control panels, Unic control system, radiators, maintanence tanks, 2 x Napier 357 turbochargers, safety spares, Caterpillar emergency generator,Natural Gas Regulator Unit, engine tools, instruction manual and more... Please contact for more info and complete scope / offer

Complete Genset, 0 hours after M6 maintenace, damaged crancksahft. (new bearings, liners, renewed turbochargers, renewed cylinder head, new main, pilot gas valves. Lot of spare parts available.

Disc valve, flapper valve, ball valve, butterfly valve, globe valve, slide gate, diaphragm valve, diaphragm globe valve, flange globe valve -Manufacturer: ARI, gate valve shut-off valve type JL1040 -Connection: DN32 PN16 -Quantity: 1x valve available -Dimension: 180/140/H280 mm -Weight: 7.2 kg

HIWIN HS22XD2YM2-1250-0550NNR-X 2-axis system X-Y X-axis: Profile width: 60mm Feed Constant: 155mm Timing Belt Axis Stroke/Overall Length: 1250mm/1775mm Slide: Type L, length 330mm Drive: prepared for gearbox g700-P44(Lenze) Wheelbase: 676mm-incl. Spacing Profiles Synchronous shaft: DM: 50mm - with couplings Y-axis: Profile width: 60mm Feed Constant: 155mm Timing Belt Axis Stroke/Overall Length: 550mm/976mm Slide: Type M, length 230mm Drive: prepared for gearbox g700-P44(Lenze) The gantry system is unused and has not yet been unpacked. Year of construction 07.2023

Key data: 70

MAN E0836 E302 CHP Unit in Acoustic Canopy for Sale. Capacity: 70kW Hours: 4,500 Year: 2011 Fuel: Natural gas Voltage: 400 Hz: 50 Scope of supply: Engine, Alternator, Control Panel, Acoustic canopy, Canopy fan, Engine water pump. Footprint of the combined heat and power unit is 3.4 meters x 1.14 meters including the control panel. It has been serviced every 1000 hours. The unit is not due an overhaul until 24,000 hours. Engine has been barred over, and the canopy fan and engine water pump have been powered up. The unit is in a warm boiler room so is in good condition. Available for sale from Gas Engine Exchange . Please check our complete range of equipment at gasengineexchange.com.

Collating machine Bourg BST-10 Two variants: 1. c.p. bourg BST-10 two towers + BDF 2. C.P. BOURG BST-10 A Tower + BDF Art.Nr. PS6044

Disc valve, flapper valve, ball valve, butterfly valve, globe valve, slide gate, diaphragm valve, diaphragm globe valve, flange globe valve -Manufacturer: ARI, gate valve shut-off valve type JL1040 -Connection: DN20 PN16 -Quantity: 1x valve available -Dimension: 150/130/H260 mm -Weight: 4.4 kg

Thickness gauge, coating thickness gauge -Manufacturer: PCE, thickness gauge with case -Type: PCE-CT 27FN -Measuring range: 0 - 1250 µm -Accessories: see photos -Dimensions: 250/210/H55mm -Weight: 0.7 kg

For sale is a LEROY-SOMER LSA L95/4P generator with the serial number 607788/1. This generator was coupled with a Jenbacher 620 engine with the design number U320. The generator delivers an output of 2530 kVA at an output voltage of 400 V. It was manufactured in 2016 and has only 500 hours of operation since then. The price of this powerful and hardly used generator is 30,000 euros. Please do not hesitate to contact us for more information or to arrange a viewing.

Dial indicator, dial gauge, measuring probe, measuring probe, precision dial gauge -Manufacturer: Format, precision dial gauge 10mm -Measuring range: 0-10 mm -Reading accuracy: 0.01 mm -Outer diameter: 58mm -Case dimensions: 130/75/H30 mm -Weight: 0.2 kg